Samsung LN40D567F9HXZA инструкция обслуживания

SyncMaster 400UXN-3, 400UX-3, 460UXN-3, 460UX-3 LCD Display User Manual The color and the appearance may differ depending on the product, and the specificatio ns are subjec t to change without prior notice to improve the performance.[...]

Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Note P[...]

Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due[...]

DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIG- ARETTES AND ANY HEATING APPLIANCES NEAR THE PRODUCT. • Otherwise, this may result in fire. Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase [...]

When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. • Otherwise, it may result in fire. When cleaning the product, make sure to disconnect the power cord. • Otherwise, it may result in electric shock or fire. When cleaning the product, disconnect the power cord and clean it with a soft, dry cloth. • ( Do [...]

If thunder or lightning is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or fire due to damage to the cable. Do not lift or m[...]

To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. • This reduces eye fatigue. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. • Otherwise, it may fall and cause personal injury and/[...]

The batteries (and rechargeable batteries) are not ordinary re- fuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling. • The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the batter[...]

Introduction Package Contents Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by holding the grooves on both sides of the package box. Check the contents of the package. Remove the Styrofoam and vinyl cover. Note • After unpacking the package, make sure to check the [...]

Manuals Quick Setup Guide Warranty Card (Not available in all loca- tions) User Manual MagicInfo Software DVD (Applicable to the 400UXN-3, 460UXN-3 model only) Cables Power Cord D-Sub Cable Others Remote Control (BP59-00138B) Batteries (AAA X 2) (Not available in all loca- tions) Sold separately Semi Stand KIT LAN Cable USB Cable (Applicable to the[...]

Sold separately RGB to BNC Cable RGB to Component Cable Network Box (Applicable to the 400UX-3, 460UX-3 model only) Wall Mount KIT TV Tuner Box (US Only) Note Accessories that can be purchased with the product vary by country. Your LCD Display Front SOURCE button Switches from PC mode to Video mode. Selects the input source that an external device [...]

Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods. Remote Control Sensor Aim the remote control towards this spot on the L[...]

DVI OUT (LOOPOUT) • Connect a monitor to another monitor through a DVI, DVI to HDMI cable. • Connect a DVI or DVI-HDMI cable to [DVI OUT (LOOPOUT)] on the product and [ DVI IN] or [ HDMI IN] on another monitor. • HDMI and network signals sent via the [ DVI OUT(LOOPOUT)] port are dis- played on the second display which has the [ DVI IN] port. [...]

Connect the [ RGB/DVI/DP/HDMI AUDIO IN] terminal of the monitor and the speaker output terminal of your computer's sound card using a stereo cable (sold separately). DP IN Receives a signal from the Display port. Connect a DP cable to [ DP IN] on the product and DP IN on another display. AV/COMPONENT AUDIO IN [R-AUDIO- L] Connect the [ AV/COMP[...]

• To use a TV tuner box (US Only), make sure to connect it to the [HDMI IN 1] terminal. HDMI IN 2 (MAGICINFO) • Connect the [ HDMI IN 2 (MAGICINFO)] terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. • Up to HDMI 1.3 can be supported. Note The MAGICINFO OUT port must be connec- ted [...]

Outputs MagicInfo DP signals. It should be connected to [ HDMI IN 2 (MAGICINFO)] via a DP to HDMI cable. LAN (LAN Connection Terminal) Connects to a LAN cable to allow Internet or network access in MagicInfo mode. Note Applicable to the 400UXN-3, 460UXN-3 model only. USB (USB Connection Terminal) Keyboard / Mouse, Mass Storage Device Compatible. No[...]

• These are general instructions. For exact instructions, see the User Manual sup- plied with the locking device. • You can purchase the locking device from an electronics store, an online shop, or our service center. Note See the "Connections" section for details about cable connections. Remote Control Note The performance of the rem[...]

OFF Turns the product Off. Number Buttons Used to enter the password during the OSD adjustment or to use MagicInfo. Press to change the channel. The "-" button is used to select Digital channels. Electronic Program Guide (EPG) display. - This function does not work for this LCD Display. + VOL - Adjusts the audio volume. SOURCE Selects a c[...]

DUAL- STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV. - This is activated when a TV tuner box is installed. ENTER/PRE-CH This button is used to return to the immediately previous channel. - This is activated when a TV [...]

1 1. The product can be tilted up to 15 degrees from a vertical wall. Ventilation requirement 1. Vertical wall mount condition <Side view> A : min. 40 mm B: Ambient temperature Measuring point <35°C • When installing the product onto a vertical wall, be sure there is a 40 mm space or more behind the product for ventilation, as shown abo[...]

A : min. 40 mm B : min. 70 mm C : min. 50 mm D : min. 50 mm E : Ambient temperature Measuring point <35°C • When embedding the product in a wall, be sure there is some space behind the product for ventilation, as shown above, and maintain the ambient temperature at 35°C or lower. Note A Samsung Electronics service center can provide details.[...]

460UXN-3, 460UX-3 Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, installation profes- sionals will visit you and install the bracket[...]

Dimensions 400UXN-3, 400UX-3 460UXN-3, 460UX-3 Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Accessories (sold separately) • Dimension with optional stand 400UXN-3, 400UX-3 Introduction[...]

460UXN-3, 460UX-3 Introduction[...]

• Dimension with welcome board Introduction[...]

• Dimension with other accessories Wall Bracket Installation • Contact a technician for installing the wall bracket. Introduction[...]

• SAMSUNG Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. • This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood. Components Only use the components and accessories shipped with the product. Wall Brack[...]

4. Remove safety pin (3) and insert the 4 product holders into the corresponding bracket holes (1). Then place the product(2) so that it is firmly fixed to the bracket. Make sure to re-insert and tighten the safety pin (3) to securely hold the product to the bracket. A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the[...]

Make sure to use the top center, and not the left or the right side of the product to adjust the angle. Remote Control (RS232C) Cable connections interface RS232C(9 pin) pin TxD(No.2) RxD(No.3) GND(No.5) Bits rate 9600 bps Data Bits 8 bit Parity None Stop Bits 1 bit Flow control None Maximum length 15 m (only shielded type) • Pin assignment Pin S[...]

• RS232C cable Connector : 9-pin D-Sub Cable : Cross (reversed) cable -P1- -P1- -P2- -P2- FEMALE Rx Tx Gnd 2 3 5 ---------> <--------- ---------- 3 2 5 Rx Tx Gnd FEMALE • Connecting method Control codes • Get control Header command ID DATA Length CheckSum 0xAA command type 0 • Set control Header command ID DATA Length DATA CheckSum 0x[...]

1 Power control 0x11 0~1 2 Volume control 0x12 0~100 3 Input source control 0x14 - 4 Screen Mode control 0x18 - 5 Screen Size control 0x19 0~255 6 PIP on/off control 0x3C 0~1 7 Auto adjustment control 0x3D 0 8 Video wall Mode control 0x5C 0~1 9 Safety Lock 0x5D 0~1 - ID should show hexadecimal value of assigned ID, but ID 0 should be 0xFF. - Every [...]

• Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘A’ 0x11 Power Power : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x11 ERR ERR : Error code that shows what occurred error is • Volume Control • Function Personal Computer changes volume of TV or Monit[...]

• Input Source Control • Function Personal Computer changes input source of TV or Monitor . • Get Input Source Status Header command ID DATA Length CheckSum 0xAA 0x14 0 • Set Input Source Header command ID DATA Length DATA CheckSum 0xAA 0x14 1 Input Source Input Source : Input Source code to be set on 0x14 PC 0x1E BNC 0x18 DVI 0x0C AV 0x04 [...]

0xAA 0xFF 3 ‘A’ 0x14 Input Source Input Source : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x14 ERR ERR : Error code that shows what occurred error is • Screen Mode Control • Function Cannot be controlled when Video Wall is on. Caution Only works with models include TV. • Get Sc[...]

• Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x18 ERR ERR : Error code that shows what occurred error is • Screen Size Control • Function Personal Computer recognizes the screen size of TV or Monitor . • Get Screen Size Status Header command ID DATA Length CheckSum 0xAA 0x19 0 • Ack Header com- ma[...]

• Set the PIP ON / OFF Header command ID DATA Length DATA CheckSum 0xAA 0x3C 1 PIP PIP : The PIP ON / OFF code to set for the TV or Monitor 1 : PIP ON 0 : PIP OFF • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘A’ 0x3C PIP PIP : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Su[...]

0xAA 0xFF 3 ‘A’ 0x3D Auto Ad- justment • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x3D ERR ERR : Error code that shows what occurred error is • Video Wall Mode Control • Function Personal Computer converts Video Wall Mode of TV or Monitor when Video Wall is ON. Only works with TV or Monitor wher[...]

Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x5C ERR ERR : Error code that shows what occurred error is • Safety Lock • Function Personal Computer turns Safety Lock function of TV or Monitor ON / OFF. Can operate regardless of whether power is ON / OFF. • Get Safety Lock Status Header command ID DATA Lengt[...]

Connections Connecting a Computer There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [ RGB/COMPONENT IN] port on the back of your LCD Display and the 15 pin D-sub Port on the computer. Using the DVI (Digital)[...]

Note Select HDMI2 (only with a 400UX-3, 460UX-3 model) or HDMI1 as an input source when connected to the PC via an HDMI cable. To obtain normal picture and audio from the PC, HDMI2 (only with a 400UX-3, 460UX-3 model) or HDMI1 must be selected before PC is se- lected in Edit Name . To enable audio when DVI Device is selected, be sure to establish t[...]

Connect between the [ DVI OUT(LOOPOUT)] port on the LCD Display and the input port on another monitor using a DVI cable. Connect between the [ AUDIO OUT] port on the LCD Display and the audio input port on another monitor using a stereo cable. Note • Select DVI Mode as an input source for the external monitor connected to [ DVI OUT] . • DVI OUT[...]

Connecting to a Camcorder 1. Locate the AV output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [ AV IN] on the LCD Dis- play . 2. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [ AV /COMPONENT A[...]

Connecting Using a HDMI Cable 1. Connect an HDMI cable to [ HDMI IN 2 (MAGICINFO)] (only with a 400UX-3, 460UX-3 model) or [ HDMI IN 1] on the product and the HDMI output port on a digital device. 2. Press SOURCE on the product or remote control and select " HDMI1 / HDMI2 (only with a 400UX-3, 460UX-3 model)" Note In HDMI mode, only PCM f[...]

nect the opposite jack to the [ RGB/DVI/DP/HDMI AUDIO IN] terminal of the LCD Display. 3. Press SOURCE on the product or remote control and select " HDMI1 / HDMI2 (only with a 400UX-3, 460UX-3 model)" Connecting a DVD Player Connect a RGB to Component cable between the [ RGB/COMPONENT IN] port on the LCD Display and the P R , Y, P B jacks[...]

Connecting a DTV Set Top (Cable/Satellite) Box Connect a RGB to Component cable between the [ RGB/COMPONENT IN] port on the LCD Display and the P R , Y, P B jacks on the Set Top Box. Connect a set of audio cables between the [ AV/COMPONENT AUDIO IN [R-AUDIO-L] ] on the LCD Display and the AUDIO OUT jacks on the Set Top Box. Note • Press SOURCE on[...]

Connecting a LAN Cable 1. Connect the LAN cable between the [ LAN] port on the product and the [LAN] port on your PC. Note Applicable to the 400UXN-3, 460UXN-3 model only. Connecting a USB devices 1. You can connect USB devices such as a mouse or keyboard. Note Applicable to the 400UXN-3, 460UXN-3 model only. Connections[...]

Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD- ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the oper- ating system you have. Prepare a blank disk and download the driver progra[...]

Note This monitor driver is certified by Microsoft, and installing it will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft ® Windows Vista™‚ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click ( Start) and &q[...]

If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Note This monitor driver is under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" [...]

9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft ® Windows ® XP Operating System Using the Software[...]

1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "[...]

7. Click the "Browse" button then choose A:(D:Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see the following message window, then click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is certified by Microsoft, and this inst[...]

10. Monitor driver installation is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:[...]

If you can see the "Digital Signature Not Found" window, then click the "Yes" button. Then click the "Finish" button and the "Close" button. Microsoft ® Windows ® Millennium Operating System 1. Click "Start", "Setting", "Control Panel". 2. Double click the "Display" i[...]

5. Set a Keyboard for your computer. 6. The next screen is for setting your monitor. 7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 8. Set a vertical frequency for your monitor. (You can enter the frequency directly.) 9. Enter the model name of your monitor. This information will not affect the[...]

MDC Program Installation/Uninstallation Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window is not displayed on the main screen, install with the "MDC Unifie d" execution file in the MDC folder on the CD. 3 Click "Next" in th e displayed[...]

Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC .[...]

Using MDC via Ethernet Enter the IP for th e primary display device and connect the device to th e PC. One display device can connect to another using an RS-232C serial cable.[...]

Connection Management Connection managemen t includes th e Connection list and Connection list modif ication options . Connection list – Connection list sho ws the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connec tion Type ), conn ection statu s, Set ID Range , and detected devices. Each connection can cont[...]

Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs conne cted in daisy-chain of a selected connection. There can be a ma ximum of 100 LFDs in a connection. The Se t ID is assign ed sequentially in th e daisy- chain runnin g from 1 to 99, and then finally to Set ID 0. Cloning Using the Cloning feature , you can copy the settin g of on[...]

Command Retry This feature is used to sp ecify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The ret ry count value ca n be set using th e MDC options window. The retry count value must be betwe en 1-10. The defau lt value is 1.[...]

Getting Started with MDC 1 To start the pr ogram, clic k Start Programs Samsung MDC Unified . 2 Click Add to add a display device. z If the connection is established via RS232C, go to Serial and specify the COM Port .[...]

z If the connection is established via Ethernet , enter the IP that wa s entered for the display device.[...]

Main Screen Layout Menu Bar Change the status of a display device or the pr operties of the program. Device Category View a list of connected display devices or device groups. Schedule Category View a list of schedules for display devices. Set List Select the display device you want to adjust. Modify the Set List Add, edit, regroup or delete sets. [...]

Menus You can power on or off a selec ted device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. Home Select an item and change the corresponding setting. Power z On : Power on a selected display. z Off : Power off a se lected dis Input z Input Source : Ch ange the input sou[...]

 This menu show s a list of display devices wh ich hav e following errors - fan e rror, temperature error, brightness sensor error, o r lamp error. Select a display device from the list. The Repair button will be enabled . Click the refresh button to refresh t he error status of the display de v ice. The recovered di splay devic e will disappea [...]

Screen Adjustment The screen s ettings (contra st, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Picture tab. Custom Select an item and change the corresponding screen setting. z Color and Tint are not available if the input source is PC . z Red , Green , Blue and PC Screen Adjustment are not availa[...]

Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the gamma valu e for the selecte d display. Auto Motion Plus This option is used to v iew dynamic ima ges. z Off : Disable the Auto Motion Plus function. z Clear : Set the level of Auto Motion Plus to clear. This mode is suit able to display v[...]

Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configur ation. The -/+ buttons c an be used to adju st Zoom . The screen can be relocated using the up/down/left/right butt ons. Detail You can view details of th e selected scre[...]

Sound Adjustment You can change th e sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display. Treble Adjust the treble for th e selected display. Balance (L/R) Adjust the volume of [...]

System Setup Choose display devices from the list of sets, and select the System tab. Video Wall The Video Wall function can be used to display part of a whole pic ture or repeat the same picture on each of connected multiple display devices. Video Wall is enabled only when devices are in the group. Video Wall Enable or disable Video Wall . Format [...]

H Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of ve rtical display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. Screen Position View the la[...]

PIP Basic information required to adjust PIP will appear in the menu screen. z PIP will be disabled when Video Wall is ON . z Note that Picture Size is disabled when PIP is ON . PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source. Sound Select Select and enable the sound from either the primary screen or secondar[...]

General User Auto Color Automatically adjust the scre en colors. Available only in PC mode. Auto Power Set the product to aut omatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan & Temperature Configure the settings required t o detect the fan sp eed and in ternal temperatu re for the pro[...]

Security Safety Lock Lock the on-sc reen menus. To unlock the menus, set Safety Lock to Off . Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off . OSD Display Source OSD Select whether to display a message when the Source is changed. Not Optimum Mode OSD Select whether to display a message when a non-c[...]

Time Clock Set Change the current time on the selected displa y device acc ording to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer z On Time : Set the time t o power on the selected displa y device. z Off Time : Set the time to power off the selecte d display device. z Volume : Specify th e[...]

 Once : Activate the timer only one time.  EveryDay : Activate the tim er every day.  Mon~Fri : Activate the timer from Monday throug h Friday.  Mon~Sat : Activate the timer on Saturdays and Sundays.  Manual : Customize days of the week. The checkboxes to select days of the week below Repeat are enabled only if Manual is selected. Ho[...]

Screen Burn Protection Pixel Shift Move the screen slightly at specified time inter vals to prevent screen burn-in. Screen Saver This function pre vents screen burn-in w hen the scre en of the s elected display dev ice is left idle for a n extended period o f time. z Interval : Set the interval to activa te the Screen Saver . z Mode : The Time sett[...]

The Safety Screen function can be used to prevent scre en bu rn-in when a station ary image displays on the screen of a display de vice for an ext ended period of time. Lamp Control Lamp Control is used to adjust the bac klight to redu ce power consumpt ion. Automatically ad just the backlight of the selected display device at a specified time. If [...]

Reset Reset Picture Reset the sc reen settings. Reset Sound Reset the sound settings. Reset System Reset the sys tem settings . Reset All Reset the screen, sound and system settings at the same time. Edit Column Select the items you want to display in the list of sets. Information View the program information. 2 3 4[...]

Other Functions Resizing a Window Place the mouse pointer on a corn er of the program window. An arro w will appear. Move the arrow to customize the size of the program window.[...]

Group Management Creating Groups Create groups and mana ge the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group>Edit in the display device list section on the left side of the program window. 2 In the Edit Group window displayed, click Add on the sub level or Add on the same leve l . z Add on th[...]

The Add on the same level button is enabled only if at least one group is created. 3 Enter the group name. Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes . The group will be deleted. Renaming Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed,[...]

Schedule Management Creating Schedules Create and register a sc hedule on a grou p basis. 1 Click All Schedule List in the schedule sec tion on the le ft side of the program window. The Add button will be enabled in the middle. 2 Click the Add button. The Add Schedule window will appear.[...]

3 Click Add belo w the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK . The schedule will be added and a list of schedules will appear in the set list window. z Device Gr oup : Select a group. z Date&Time  Instant Execution : Run the schedule immediately.  Timer Set the da[...]

Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. Issue Solution The display you wan t to control does not appear on th e system information chart. 1. Check the conn ection of the RS232C c able (check that the cable [...]

How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected disp lay are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 Wh[...]

Adjusting the LCD Display Input Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note • A TV tuner box (sold separately) must be connected to use the TV. (US Only) • For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is connected. Source List Use to select PC , HDMI or ot[...]

Note The RGB/COMPONENT IN port is compatible with RGB (PC) and Component signals. However, the picture may display abnormally if the connected external input signal is different from the selected video signal. PIP Note The PIP function is not available when Video Wall is On . When external AV devices such as VCRs or DVDs are connected to the LCD Di[...]

• PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort • DVI : PC • AV : PC • HDMI : PC • DisplayPort : PC Size Changes the Size of the PIP window. Note Size will be changed to 16:9 when PIP is On . Position Changes the Position of the PIP window. Transparency Adjusts the Transparency of PIP windows. • High • Medium • Low Adjusting the LCD D[...]

• Opaque Edit Name Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC / DVI Devices Note • The displayed devices differ depending on the external input mode. • When connecting a PC t[...]

Refer to PIP > Source for compatible signals for each primary input source. Source AutoSwitch When the Source AutoSwitch is On , the display video source will automatically be searched for active video. The Primary Source selection will be activated, if the current video source is not recognized. Secondary source selection will become active, if[...]

Primary Source Specify Primary Source for the automatic input source. Secondary Source Specify Secondary Source for the automatic input source. Picture [ PC / DVI / DisplayPort / MagicInfo Mode] Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note • A TV tuner box (sold separately) must be connected t[...]

Note Not available when Dynamic Contrast is set to On . 1. Information Recommended for communicating exact information (e.g. public information). 2. Advertisement Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads). 3. Custom Custom By using the on-screen menus, the contrast and brightness can be changed to your persona[...]

• Mode 1 Sets the picture brighter than < Natural >. • Mode 2 Sets the picture darker than < Mode 1 >. • Mode 3 Increases the contrast between dark and bright colors. Color Tone Note Not available when Dynamic Contrast is set to On . The color tones can be changed. 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note • If you set the[...]

3. Blue Color Temp. Color Temp. is a measure of the 'warmth' of the image colors. Note • Not available when Dynamic Contrast is set to On . • This function is only enabled if the Color Tone is set to Off . Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and [...]

Auto Adjustment The values of Fine , Coarse , Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. Note Available in PC mode only. Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. Note • Not available when Dynamic Contrast is set to [...]

6. B-Offset Size The Size can be switched. 1. 16:9 2. 4:3 PIP Picture Adjusts the PIP Screen Settings. Note Available Modes: PIP On 1. Contrast Adjusts the Contrast of the PIP window on the screen. 2. Brightness Adjusts the Brightness of the PIP window on the screen. 3. Sharpness Adjusts the Sharpness of the PIP window on the screen. 4. Color Adjus[...]

Note PIP input only operates in AV , HDMI , or Component mode. 5. Tint Adds a natural tone to the PIP window. Note PIP input only operates in AV , HDMI , or Component mode. Dynamic Contrast Dynamic Contrast automatically detects the distribution of the visual signal and adjusts to create an optimum contrast. 1. Off 2. On Note Disabled when PIP is s[...]

• AV • Component • HDMI • MagicInfo • TV Note • A TV tuner box (sold separately) must be connected to use the TV. (US Only) • For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is connected. Mode The LCD Display has four automatic picture settings (" Dynamic ", " Standard ", " Movi[...]

Brightness Adjusts the Brightness. Sharpness Adjusts the picture Sharpness. Color Adjusts the picture Color. Tint Adds a natural tone to the display. Note Not available when Dynamic Contrast is set to On . Color Tone The color tones can be changed. The individual Color components are also user adjustable. Note Not available when Dynamic Contrast is[...]

Note If you set the Color Tone to Cool2 , Cool1 , Normal , Warm1 , or Warm2 , the Color Temp. function is disabled. Color Temp. Color temp. is a measure of the 'warmth' of the image colors. Note This function is enabled when Mode is set to Custom , and Dynamic Contrast and Color Tone are Off . Size The Size can be switched. PC mode ( PC ,[...]

Digital NR (Digital Noise Reduction) Turns the Digital Noise Reduction feature Off / On . The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On Note Digital NR function is not available for all resolutions. HDMI Black Level When a DVD or set-top box is connected to your TV via HDMI, it may cause a degradat[...]

Film Mode calibrates unnatural pictures that may occur in a movie (which is in 24 frames). Moving subtitles may appear corrupted when this mode is enabled. ( In HDMI mode, this function is available when the input signal is interlaced scan; it is not available in progressive scan.) 1. Off 2. On PIP Picture Adjusts the PIP Screen Settings. Note Avai[...]

Lamp Control Adjusts the inverter lamp in order to reduce energy consumption. Note Not available when Dynamic Contrast is set to On . Picture Reset Reset the screen settings. Sound Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note • A TV tuner box (sold separately) must be connected to use the TV. [...]

Selects Music when watching music videos or concerts. 3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialog (i.e., news). 5. Custom Selects Custom if you want to adjust the settings according to your personal preferen- ces. Custom The sound settings can be adjusted to suit your personal pref[...]

SRS TS XT SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround XT delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1. Off 2. On So[...]

2. External Sound is only output from the external speakers, and the volume can only be controlled for them as well. Sound Reset Reset the sound settings. Setup Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note • A TV tuner box (sold separately) must be connected to use the TV. (US Only) • For an[...]

Clock Set Current Time Setting. Sleep Timer Turns the LCD Display off automatically at certain times. 1. Off 2. 30 3. 60 4. 90 5. 120 6. 150 7. 180 Timer1 / Timer2 / Timer3 You can set the LCD display to automatically turn on or off at a specified time. Note • Hoilday : select Apply to disable the timer on holidays and Don't apply to enable [...]

• The Manual option allows you to select a day of the week. Holiday Management • Add You can register holidays. • Delete Selected You can delete selected holidays. Note • Only enabled when registered holidays are selected. • More than one holiday can be selected and deleted. • Delete All You can delete all the registered holidays. Adjus[...]

Menu Transparency Change the transparency of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PIN The password can be changed. The preset password for the LCD Display is "0000". Note If you forgot your password, press the remote buttons INFO → EXIT → MUTE to reset the password to "0000." Lock [...]

Energy Saving This feature adjusts the power consumption of the unit in order to save energy. 1. Off 2. On Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. When the Video Wall is on, you can adjust the Video Wall screen s[...]

The Format can be selected to see a divided screen. • Full Provides a full screen without any margins. • Natural Displays a natural image with the original aspect ratio intact. Horizontal Sets how many parts the screen should be divided horizontally. Fifteen adjustment levels: 1~15. Note If Vertical is set to 15 , the maximum value for Horizont[...]

The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. • Select a mode in Screen Position . • Select a display in Display Selection. • The selection will be set up by pressing a number in the selected mode. • The screen can be split into a maximum of 100 sub-screens. Note Wh[...]

Vertical Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for t[...]

You can change the Safety Screen Type. • Bar • Eraser • Pixel Period Use this function to set the execution period for each mode set in the timer. Time Within the set period of time specify a time for execution. • Mode - Bar , Eraser , Pixel : 10~50 sec Bar This function prevents after-images on the screen by moving long black and white ver[...]

This function prevents after-images on the screen by moving a rectangular pattern. Pixel This function prevents after-images by moving many pixels on the screen. Side Gray Select the brightness of the grey for the screen background. • OFF • Light • Dark Resolution Select When the picture is not displayed properly on the screen when setting th[...]

4. 1360 x 768 5. 1366 X 768 Note Selecting the menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768 @ 60Hz or 1366 x 768 @ 60Hz. Power On Adjustment Adjusts the Power On time for the screen. Caution: Set the Power On time to be longer to avoid overvoltage. OSD Rotation OSD Rotate 1. Landscape [...]

Temperature Control Detects the product's internal temperature and specifies the desired temperature. The product is set to 77°C by default. Note • The picture will be dimmed if the temperature exceeds the specified temperature, and the product will automatically power off to prevent overheating if the temperature keeps rising. • It is be[...]

Button Lock Locks or unlocks the monitor control buttons on the product. • Off • On User Auto Color 1. Auto Color Automatically adjusts the colors. 2. Reset Resets the color settings. Note Enabled only in PC mode. Standby Control Sets the standby mode, which will be activated when no input signal is detected. • Off A message will read < No[...]

Power-saving mode will be activated if no input signal is detected. • Auto When no input signal is detected, - Power-saving mode will be activated if an external device is connected. - A message will read < No Signal > if no external device is connected. Note • Enabled only in PC , DVI , HDMI , or DP ( DisplayPort ) mode. • Auto will be[...]

• Off • On No Signal OSD • Off • On MDC OSD • Off • On Software Upgrade Performs a software upgrade. 1. Connect the product to a computer via a digital signal such as DVI or HDMI . Click the BMP image file converted from an SW code. The image below will appear on the screen of the product. 2. While a BMP image onto which the software co[...]

• It is recommended that the playback interval between two BMP images in the slide- show should be one second. The image extraction probability will decrease with other playback intervals. • A BMP image might not be extracted if it is covered by another image (for example, the mouse pointer). 3. If a more recent version than the current softwar[...]

• MagicInfo • TV Note • A TV tuner box (sold separately) must be connected to use the TV. (US Only) • For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is connected. Multi Control Assigns an individual ID to the SET. • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter fun[...]

• Component • HDMI • MagicInfo For an 400UX-3, 460UX-3 model, MagicInfo can only be enabled when a network box is connected. Note • The remote control can be used to select MagicInfo . However, it is recommended to use a separate USB keyboard to utilize MagicInfo fully. • For MagicInfo in Device mode, moving external devices while booting[...]

1. Select Application - step 1 You can select an Application to be executed in your computer when Windows starts. 2. Select TCP/IP - step 2 In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop to make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation. 3. Select Language - step 3 [...]

When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 You can select which rotation type will be applied to your device. 5. Setup Information Adjusting the LCD Display English is set as the default language. You do not need to select a language if you will be using English as the menu d[...]

Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear. Adjusting the LCD Display[...]

Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the LCD Display. The f[...]

• Do not use benzene, thinner or other flammable sub- stances. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). • Never use acetone, benzene or thinner. ( They may cause flaws or deformation of the screen surface.) • The user is responsible for any damage caused by using these substances. Symptoms and Re[...]

A: Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off. A: Ensure that the power cord is firmly connected and th[...]

Q: The screen color is inconsistent. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color image is distorted by dark shadows. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color white is poor. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The Power Indicator blinks. A: The LCD Display [...]

A: Check if a special fluorescent or neon lamp is on in the vicinity. Q & A Q: How can I change the frequency? A: The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) Q: How can I adjust the [...]

Specifications General General Model Name SyncMaster 400UXN-3, 400UX-3 / 460UXN-3, 460UX-3 LCD Panel Size 400UXN-3, 400UX-3 40 inch (101 cm) 460UXN-3, 460UX-3 46 inch (116 cm) Display area 400UXN-3, 400UX-3 885.6 mm (H) x 498.15 mm (V) 460UXN-3, 460UX-3 1018.08 mm (H) x 572.67 mm (V) Synchronization Horizontal 30~81 kHz Vertical 56~85 Hz Display Co[...]

Dimensions (WxHxD) 460UX-3 41.3 X 26.3 X 12.2 inches Without Stand 460UXN-3 460UX-3 1049.4 X 602.6 X 118.0 mm 41.3 X 23.7 X 4.6 inches Weight 400UXN-3 19.0 Kg / 41.9 lbs 400UX-3 17.5 Kg / 38.6 lbs 460UXN-3 26.0 kg / 57.3 lbs 460UX-3 24.5 kg / 54.0 lbs VESA Mounting Interface 600.0 mm X 400.0 mm Environmental considerations Operating (With Network B[...]

Class A (Information Communication equipment for industrial use) : 400UXN-3, 460UXN-3 Attention dealers and users. This device is registered for EMC requirements for industrial use (Class A) and can be used in areas other than general households. Class B(Information Communication equipment for residential use) : 400UX-3, 460UX-3 This device is regi[...]

Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjusts the screen as follows. Display Mode Horizontal Vertical Fre- Pixel [...]

called the Vertical Frequency or Refresh Rate. Unit: Hz Specifications Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inverse number of the Hor- izontal Cycle is called the Horizontal Frequency. Unit: kHz Vertical Frequency Like a fluorescen[...]

Information For a Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT- LCD. • Resolution: 1920 x 1080 • Vertical frequency (refresh rate): 6[...]

Power Off, Screen Saver, or Power Save Mode • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one color or a moving image is recommended. • The Image Retention Free function applied to the product is recommende[...]

Change the characters color periodically • Use Bright colors with little difference in luminance. - Cycle : Change the characters color and background color every 30 minutes • Every 30 minutes, change the characters with movement. • Have the images and logo cycle periodically. - Cycle: Display moving image together with Logo for 60 seconds af[...]

• Apply the Screen Erasing function - Symptom: 2 Vertical blocks move while erasing the display Information[...]

Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca http://www.samsung.com/ ca_fr (French) MEXICO 01-800-SAMSUNG http:/[...]

Appendix Europe http://www.samsung.com/ be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 http://www.samsung.com 7864) CZECH 800 - SAMSUNG http://www.samsung.com (800-726786) DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE[...]

Appendix Europe SWITZERLAND 0848 - SAMSUNG (7267864, http://www.samsung.com/ch CHF 0.08/min) http://www.samsung.com/ ch_fr/(French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com EIRE 0818 717100 http://www.samsung.com LITHUANIA 8-800-77777 http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com TUR[...]

Appendix Asia Pacific JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG http://www.samsung.com (726-7864) for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com THAILAND 1800-29-3232 htt[...]

Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The dis- tance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user. T[...]

Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) ( Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should n[...]

Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this ma- terial. Samsung is the registered trademark of Samsung Electronics Co., Ltd.; Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation[...]