Samsung LN46A630 инструкция обслуживания

Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center . Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente. Country Customer Care Center Web Site Ad[...]

Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. T o avoid such image retention, reduce the degree of brightness and contrast of the s[...]

General Information List of Features ..................................................................2 Accessories .......................................................................2 Viewing the Control Panel .................................................3 Viewing the Connection Panel ...........................................4 Remote Co[...]

English - 2 List of Features Adjustable picture settings that can be stored in the TV’ s memory . Automatic timer to turn the TV on and of f. A special sleep timer . Excellent Digital Interface & Networking : With a built-in HD digital tuner , non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-T op Box) nee[...]

English - 3 Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’ s basic features, including the on-screen menu. T o use the more advanced features, you must use the remote control. 8 8 1 2 3 4 5 7 6 8 8 4 1 2 3 6 5 1 2 3 4 5 6 7 7 8 7 1 2 3 4 5 6 7 7 8 8 7 6 5 4 3 1 1 2 The [...]

English - 4 Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously , such as DVD players or a VCR. For more information on connecting equipment, see pages 6~1 1. [TV Side Panel] [TV Rear Panel] The product color and shape may vary depending on the model. ➣ 1 AUDIO OUT Connects to [...]

English - 5 Remote Control Y ou can use the remote control up to a distance of about 23 feet from the TV . 1 POWER T urns the TV on and off. 2 TV Selects the TV mode directly . 3 NUMERIC BUTTONS Press to change the channel. 4 Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select channel[...]

English - 6 Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the gure. 2. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Remove the batteries and store them in a cool,[...]

English - 7 Connecting Cable TV T o connect to a cable TV system, follow the instructions below . Cable without a Cable Box 1. Plug the incoming cable into the ANT IN terminal on the back of the TV . Because this TV is cable-ready , you do not need a cable box to view unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channe[...]

English - 8 Connecting a DVD Player or Cable Box/Satellite receiver (Set-T op Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. 1. Connect an HDMI Cable between the HDMI IN (1, 2 or 3) jack on the TV and the HDMI jack on the DVD Player or Cable Box/Satellite receiver (Set-T op Box). What is [...]

English - 9 or TV Side Panel Camcorder S-Video Cable (Not supplied) 1 Audio Cable (Not supplied) 2 Video Cable (Not supplied) 1 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV . They allow you to view the camcorder tapes without using a VCR. 1. Connect a Video Cable (or S-Video Cable) between th[...]

English - 10 Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back of the TV . 2. Connect the cable or [...]

English - 11 Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV . 1. Connect an Optical Cable between the “DIGIT AL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is co[...]

English - 12 T urning the TV On and Off Press the POWER button on the remote control. Y ou can also use the POWER button on the TV . Operation Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently . 1. Press the POWER button on the remote control. The message “Menu Language, Store Demo,[...]

English - 13 6. Press the ENTER button. Press the ▲ or ▼ button to select “Auto”, then Press the ENTER button. The message “Set to daylight saving time.” is displayed. If you select “Manual”, “Set current date and time” is displayed. (See page 46) 7. Press the ▲ or ▼ button to select “Off” or “On”, then press the ENT[...]

English - 14 Adjusting the V olume Using the V olume Button 1. Press the VOL – or VOL + button to increase or decrease the volume. Using the MUTE button At any time, you can cut off the sound using the MUTE button. 1. Press MUTE button and the sound cuts off. “ ” is displayed on the screen. 2. T o turn mute off, press the MUTE button again or[...]

English - 15 Using the TOOLS Button Y ou can use the TOOLS button to select your frequently used functions quickly and easily . The “T ools” menu changes depending on which external input mode you are viewing. 1. Press the TOOLS button. The “T ools” menu will appear . 2. Press the ▲ or ▼ button to select a menu. 3. Press the ▲/▼/◄[...]

English - 16 Storing Channels in Memory (Automatic Method) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button. 3. Press the ▲ or ▼ button to select the antenna connection, then pre[...]

English - 17 T o Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-T op Box) connected to the TV . Use to select the input source of your choice. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Input”, then press the ENTER button. 2. [...]

English - 18 Picture Control Changing the Picture Standard Y ou can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ENTER button to select “Mode”. Press the ▲ or ▼ button to select “Dynamic”, “Stan[...]

English - 19 Adjusting the Detailed Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ENTER button to select “M[...]

English - 20 Adjusting the Gamma Y ou can adjust the Primary Color (Red, Green, Blue) Intensity . (-3 ~ +3) 8. Press the ▲ or ▼ button to select “Gamma”, then press the ENTER button. 9. Press the ◄ or ► button to decrease or increase the value. Press the ENTER button. Setting the Color Space Color space is a color matrix composed of red[...]

English - 21 Adjusting the White Balance Y ou can adjust the color temperature for more natural picture colors. 17. Press the ▲ or ▼ button to select “White Balance”, then press the ENTER button. 18. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 19. Press the ◄ or ► button to decrease or incr[...]

English - 22 Resetting the Picture Settings to the Factory Defaults 1. T o select the desired picture mode, follow the “Changing the Picture Standard” instructions numbers 1 and 2. (see page 18) 2. Press the ▲ or ▼ button to select “Picture Reset”, then press the ENTER button. 3. Press the ◄ or ► button to select “Reset Picture Mo[...]

English - 23 ConguringPictureOptions Activating Picture Options 1. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. 2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. Press the ▲ or ▼ button to select a particular item. Press the ENTER button. When you [...]

English - 24 When Double ( , ) mode has been set in PIP , the Picture Size cannot be set. T emporary image retention may occur when viewing a static image on the set for more than two hours. After selecting “Zoom1”, “Zoom2” or “Wide Fit” : Press the ◄ or ► button to select “Position”, then press the ENTER button. Press the ▲ o[...]

English - 25 Setting the Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 23) 2. Press the ▲ or ▼ butto[...]

English - 26 Setting the Film Mode The TV can be set to automatically sense and process lm signals from all sources and adjust the picture for optimum quality . 1. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 23) 2. Press the ▲ or ▼ button to select “Film Mode”, then press the ENTER button. 3. [...]

English - 27 Viewing Picture-in-Picture Y ou can use the PIP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external video source. (See page 33 to select the PIP picture sound.) This product has one built-in tuner , which does not allow PIP to function in the same mode. Please see ‘PIP Settings’ below for details.[...]

English - 28 Changing the PIP Channel 5. Press the ▲ or ▼ button to select “Air/Cable”, then press the ENTER button. 6. Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER button. 7. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 8. Press the ▲ or ▼ button to select the[...]

English - 29 Sound Control Changing the Sound Standard Y ou can select the sound mode to best suit the programming you’re watching. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2. Press the ENTER button to select “Mode”. Press the ▲ or ▼ button to select “S[...]

English - 30 4. Press the ▲ or ▼ button to select a particular frequency to adjust. Press the ◄ or ► button to increase or decrease the level of the particular frequency . Mode : Selects the sound mode among the predened settings. Balance L/R : Adjusts the balance between the right and left speaker. Bandwidth Adjustment (100Hz, 300Hz, 1k[...]

English - 31 Choosing Preferred Language The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). Select the language you would like to hear the audio track in. 1. Press the MENU button to display the menu. Press the ▲ or ▼ but[...]

English - 32 Automatic V olume Control Reduces the differences in volume level among broadcasters. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Auto V olume”, then press the ENTER button. 3. Press the ▲ or ▼ button to s[...]

English - 33 Listening to the Sound of the Sub (PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Sound Select”, then press th[...]

English - 34 Managing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. Viewing All Channels Show all currently available channels. T o use the Channel List function, rst run “Auto Program” (see page 16). 1. Press the MENU button. Press the ▲ or ▼ button to select “C[...]

English - 35 Erasing and Adding Channels Y ou can delete or add a channel to display the channels you want. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ◄ button to select “Added Chan[...]

English - 36 Setting Y our Favorite Channels Y ou can set channels you watch frequently as favorites. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ◄ button to select “Added Channels?[...]

English - 37 Reserving a Program (Timer V iewing) If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. T o reserve a program, set the current time rst. See pages 46~47. Reserved channels can only be set if they are in the “Chan[...]

English - 38 ConrmingaViewingReservation Y ou can view , modify or delete a reservation. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ◄ button to select “Added Channels”[...]

English - 39 Labeling Channels - Analog Channels can labeled so that their call letters appear whenever the channel is selected. 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ▲ or ▼ bu[...]

English - 40 Selecting and Deselecting All Channels 1. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button. 2. Press the ▲ or ▼ button to select the channel, then press the TOOLS button. 3. Press the ▲ or [...]

English - 41 Clearing Scrambled Channels - Digital The “Clear Scrambled Channel” function is used to lter out scrambled channels after “Auto Program” is completed. This process may take up to 20~30 minutes. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2. P[...]

English - 42 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear , digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot ne tune a digital channel. Y ou can, however , adjust your antenna to i[...]

English - 43 Using Y our TV as a Computer (PC) Display Setting Up Y our PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below . The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However , even if your actual scre[...]

English - 44 Setting up the TV with your PC How to Auto Adjust Use the Auto “Adjust function” to have the TV set automatically adjust the video signals it receives. The function also automatically ne-tunes the settings and adjusts the frequency values and positions. This function does not work in DVI-Digital mode. Preset: Press the SOURCE bu[...]

English - 45 Changing the Screen Position Adjust the PC’s screen positioning if it does not t the TV screen. Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Screen”, th[...]

English - 46 Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV . Also, you can check the time while watching the TV . (Just press the INFO button.) Option 1: Setting the Clock Manually 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the E[...]

English - 47 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. 2. Press the EN[...]

English - 48 Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. [...]

English - 49 Setting the On/Off Timer 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. 2. Three different On/Off Timer Settings can be made. Press the ▲ or ▼ button to select “T imer 1”[...]

English - 50 Selecting a Menu Language 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “Language”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “English”, “Español” or “Français”. Press the E[...]

English - 51 3. The “V -Chip” screen will appear . Press the ▲ or ▼ button to select “Change PIN”, then press the ENTER button. The Change PIN screen will appear . Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the “Conrm New PIN.” screen appears. Re-enter the same 4 digits. When the Conr[...]

English - 52 How to Set up Restrictions Using the TV Parental Guidelines First, set up a personal identication number (PIN) and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating. 1. Press the MENU button to display the menu. Press the ▲ or ▼ butt[...]

English - 53 How to Set up Restrictions Using the MP AA Ratings: G, PG, PG-13, R, NC-17, X, NR The MP AA rating system uses the Motion Picture Association of America (MP AA) system and its main application is for movies. When the V -Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MP AA[...]

English - 54 How to Set up Restrictions Using the Canadian English 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear . Enter your 4 digit PIN number [...]

English - 55 How to Set up Restrictions Using the Canadian French 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear . Enter your 4 digit PIN number .[...]

English - 56 Using the V -Chip for Digital channels Parental restriction information can be used while watching DTV channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message ?[...]

English - 57 Viewing Closed Captions (On-Screen T ext Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV . (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1. Press the MENU button to display the menu.[...]

English - 58 Viewing Closed Captions (On-Screen T ext Messages) - Digital The Digital Captions function operates on digital channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 3. Pr[...]

English - 59 Adjusting the TV On/Off Melody Sound A melody sound can be set to come on when the TV is powered On or Of f. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “External Settings”, then press the ENTER button. 3. Pres[...]

English - 60 Using the Energy Saving Feature This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving “ mode option to “High” to reduce eye fatigue as well as power consumption. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select [...]

English - 61 Self diagnosis Picture T est Please perform the picture test if there is a problem on the screen. Check the color pattern on the screen, and analyze whether the TV is defective. 1. Please press the ‘-’ button for more than 5 seconds. The “Self Diagnostic T est” message is displayed. 2. Press the ▲ or ▼ button to select “P[...]

English - 62 WISELINK Using the WISELINK Function Connecting a USB Device This function enables you to view and listen to photo (JPEG) and audio les (MP3) saved on a USB Mass Storage Class (MSC) device. 1. Press the POWER button on the remote control or front panel. The TV is powered on. 2. Connect a USB device containing JPEG and/or MP3 les [...]

English - 63 Using the WISELINK Menu 1. Press the MENU button. Press the ▲ or ▼ button to select “Application”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER button. The “WISELINK” menu is displayed. Press the W .LINK button on the remote control to display the “WISELINK” [...]

English - 64 Screen Display Photo SUM  Device  Favorites Setting  Select Jump Option image_1.jpg Month : Jan Date : Jan.01.2008 Color : Gray Composition : Folder : P-other Favorite : ★ ★ ★ Preference Monthly Timeline Jan Nov ▲ 1File(s) Selected 2 6 1 3 4 7 5 1 Currently selected photo Shows the currently selected photo. 2 Photo Inf[...]

English - 65 Sorting Photo List Y ou can sort photos in the Photo List by a particular standard. 1. Press the W .LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to select “Photo”, then press the ENTER button. Photo les are displayed. 3. Press the ▲ or ▼ button to select a sorting stand[...]

English - 66 Color Sorts photos by color . Y ou can change the photo color information. 1. Select “Color” as the sorting standard in the Photo List. 2. Press the ◄ or ► button to select from the sublist of les grouped by color . T o move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. Press the ?[...]

English - 67 Folder Sorts photos by folder . If there are many folders in USB, the photos les are shown in order in each folder . The photo le in the Root folder is shown rst and the others are shown in alphabetical order by name. 1. Select “Folder” as the sorting standard in the Photo List. 2. Press the ◄ or ► button to select fro[...]

English - 68 DeletingthePhotole 1. Press the ◄ or ► button to select the desired photo in the Photo list. 2. Press the TOOLS button. 3. Press the ▲ or ▼ button to select “Delete”, then press the ENTER button. The “Delete this le?” message appear . 4. Press the ◄ or ►button to select “OK”, then press the ENTER [...]

English - 69 Viewing a Photo or Slide Show Viewing a Slide Show 1. Press the W .LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. Photo les are displayed. 3. Press the ◄ or ► button to select the desired photo in the Photo list. 4. Press t[...]

English - 70 Viewing a photo 1. Press the W .LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. Photo les are displayed. 3. Press the ◄ or ► button to select the desired photo in the Photo list. Then Press the Y ellow button to select only [...]

English - 71 Zoom Y ou can zoom into images in full screen mode. Press the ▲ or ▼ button to select “Zoom”, then press the ENTER button. Press the ◄ or ► button repeatedly to increase or decrease the Zoom effect. (x1 → x2 → x4) T o move the enlarged photo image, press the ENTER button, then press the ▲/▼/◄/► buttons. Note tha[...]

English - 72 Background Music Setting Y ou can set the background music. Press the ▲ or ▼ button to select “Background Music Setting”, then press the ENTER button. If you turn off the “Background Music”, even if the “Background Music Settings” have been set up, the background music will not be played. Loading music les is needed [...]

English - 73 Using the Music List This menu shows MP3 les from among the les saved on a USB memory device. 1. Press the W .LINK button on the remote control to display the “WISELINK” menu. 2. Press the ◄ or ► button to select “Music”, then press the ENTER button. Music les are displayed. Press the (Play) / ENTER button over a m[...]

English - 74 Sorting Music List Y ou can sort music les in the Music List by a particular standard. 1. Press the W .LINK button on the remote control to display the WISELINK menu. 2. Press the ◄ or ► button to select “Music”, then press the ENTER button. Music les are displayed. 3. Press the ▲ or ▼ button to select a sorting stand[...]

English - 75 Artist Sorts music les by the artist. It sorts the music le by artist in alphabetical order . 1. Select “Artist” as the sorting standard in the Music List. 2. Press the ◄ or ► button to select from the sublist of les grouped in alphabetical order . T o move to the previous / next group, press the (REW) or (FF) button. [...]

English - 76 Genre Sorts music les by the genre. 1. Select “Genre” as the sorting standard in the Music List. 2. Press the ◄ or ► button to select from the sublist of les grouped by Genre. T o move to the previous / next group, press the (REW) or (FF) button. 3. Press the TOOLS button. 4. Press the ▲ or ▼ button to select “Play [...]

English - 77 DeletingtheMusicle 1. Press the ◄ or ► button to select the desired music le in the music list. 2. Press the TOOLS button. 3. Press the ▲ or ▼ button to select “Delete”, then press the ENTER button. The “Delete this le?” message appear . 4. Press the ◄ or ► button to select “OK”, then press the[...]

English - 78 Playing a Music File Playingamusicle 1. Press the W .LINK button on the remote control to display the WISELINK menu. 2. Press the ◄ or ► button to select “Music”, then press the ENTER button. Music les are displayed. 3. Pressing the ◄ or ► button to select a music le to be played, then press the ENTER butt[...]

English - 79 Playingtheselectedmusicles 1. Press the W .LINK button on the remote control to display the WISELINK menu. 2. Press the ◄ or ► button to select “Music”, then press the ENTER button. 3. Press the ◄ or ► button to select the desired music le, then press the yellow button. Repeat the above operation to select[...]

English - 80 Using the Setup Menu Setup displays the user settings of the WISELINK menu. 1. Press the W .LINK button on the remote control to display the WISELINK menu. 2. Press the ◄ or ► button to select “Setup”, then press the ENTER button. 3. Press the ▲ or ▼ button to select the desired option. (Slide Show Speed, Music Repeat Mode,[...]

English - 81 What is Anynet + ? Anynet + is a function that enables you to control all connected Samsung devices that support Anynet + with your Samsung TV’s remote. About Anynet + Connecting Anynet + Devices The Anynet + system can be used only with Samsung devices that have the Anynet + feature. T o be sure your Samsung device has this feature,[...]

English - 82 Setting Up Anynet + The following settings help set the Anynet + functions. T o use the Anynet+ Function, Anynet + (HDMI-CEC) must be set to On 1. Press the MENU button. Press the ▲ or ▼ button to select “Application”, then press the ENTER button. 2. Press the ▲ or ▼ button to select “Anynet + (HDMI-CEC)”, then press th[...]

English - 83 Scanning and Switching between Anynet + Devices 1. Press the TOOLS button. Press the ENTER button to select “Anynet+ (HDMI-CEC)”. 2. Press the ▲ or ▼ button to select “Device List”, then press the ENTER button. Anynet+ devices connected to the TV are listed. If you cannot nd a device you want, press the red button to sca[...]

English - 84 Recording Y ou can make a recording of a TV program using a Samsung recorder . 1. Press the TOOLS button. Press the ENTER button to select “Anynet+ (HDMI-CEC)”. 2. Press the ▲ or ▼ button to select “Recording: (device_name)”, then press the ENTER button. Recording begins. When there is more than one recording device When mu[...]

English - 85 T roubleshooting for Anynet + Symptom Solution Anynet + does not work. Check if the device is an Anynet+ device. The Anynet + system supports Anynet + devices only . Connect only one receiver (home theater). Check if the Anynet + device power cord is properly connected. Check the Anynet + device’s V ideo/Audio/HDMI 1.3 cable connecti[...]

English - 86 T roubleshooting If the TV seems to have a problem, rst try this list of possible problems and solutions. If none of these troubleshooting tips apply , call Samsung customer service at 1-800-SAMSUNG. Problem Possible Solution Poor picture. T ry another channel. Adjust the antenna. Check all wire connections. Poor sound quality . T r[...]

English - 87 Problem Possible Solution Screen is black and power indicator light blinks steadily . On your computer check: Power , Signal Cable. The TV is using its power management system. Move the computer's mouse or press any key on the keyboard. Image is not stable and may appear to vibrate when you have a computer connected to the PC inpu[...]

English - 88 Installing the Stand 1. Attach your LCD TV to the stand. T wo or more people should carry the TV . Make sure to distinguish between the front and back of the stand when attaching it. T o make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV . 2. Fa[...]

English - 89 Auto W all-Mount Adjustment (Sold separately) Once the auto wall mount is installed, your TV’ s position can be easily adjusted. TV Rear Panel Auto Wall-Mount EX-LINK Cable (Not supplied) Entering the menu 1. Press the ▲, ▼, ◄ or ► button on your remote control. The W all Mount Adjustment screen is displayed. If the W all Mou[...]

English - 90 W allMountKitSpecications(VESA) Install your wall mount on a solid wall perpendicular to the oor . When attaching to other building materials, please contact your nearest dealer . If installed on a ceiling or slanted wall, it may fall and result in severe personal injury . Product Family inches VESA Spec. (A * B) Stan[...]

English - 91 Using the Anti-Theft Kensington Lock The Kensington Lock is a device used to physically x the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer . Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be pu[...]

English - 92 Securing the TV to the W all Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular , ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over , causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer . For added s[...]

English - 93 Specications Model Name LN40A630M1F LN46A630M1F LN52A630M1F Screen Size (Diagonal) 40 inches (39.9 inches measured diagonally) 46 inches (45.9 inches measured diagonally) 52 inches (52 inches measured diagonally) PC Resolution 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz Sound Output 10W x 2 10W x 2 10W x 2 Dimensions[...]

English - 94 Dimensions LN40A630M1F TOP VIEW JACK P ANEL DET AIL 3.7"H X 9.1"W 24.0 26.4 22.8 34.9 19.6 9.4 3.3 38.9 FRONT VIEW / SIDE VIEW 7.9 (200 mm) 7.9 (200 mm) REAR VIEW NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installatio[...]

English - 95 Dimensions LN46A630M1F TOP VIEW JACK P ANEL DET AIL 3.7"H X 9.1"W 27.0 29.3 24.4 40.1 22.6 10.2 3.7 44.0 FRONT VIEW / SIDE VIEW 23.6 (600 mm) 15.7 (400 mm) REAR VIEW NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installa[...]

English - 96 Dimensions LN52A630M1F TOP VIEW JACK P ANEL DET AIL 3.7"H X 9.1"W 30.7 33.0 24.4 45.5 25.7 1 1.5 4.1 50.0 FRONT VIEW / SIDE VIEW 23.6 (600 mm) 15.7 (400 mm) REAR VIEW NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing install[...]

The GNU General Public License (GPL) V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 T emple Place, Suite 330, Boston, MA 021 1 1-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to tak[...]

These requirements apply to the modied work as a whole. If identiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the sa[...]

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number . If the Program species a version number [...]

GNU Lesser General Public License (LGPL) V ersion 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 T emple Place, Suite 330, Boston, MA 021 1 1-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the rst released version of the Lesse[...]

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICA TION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each license[...]

5. A program that contains no derivative of any portion of the Library , but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library , and therefore falls outside the scope of this License. However , linking a “work t[...]

10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy , distribute, link with or modify the Library subject to these terms and conditions. Y ou may not impose any further restrictions on the recipients’ exercise of the rights granted herein.[...]

END OF TERMS AND CONDITIONS How to Apply These T erms to Y our New Libraries If you develop a new library , and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. Y ou can do so by permitting redistribution under these terms (or , alternatively , under the te[...]

T h i s p a g e i s i n t e n t i o n a l l y l e f t b l a n k . 3_BN68-01669A-Eng (81~).indd 105 2008-06-13 ¿ÀÈÄ 7:20:11[...]