Samsung NC241T инструкция обслуживания

User manual NC191 NC241 The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance. BN46-00099C-02[...]

Table Of Cont ents 2 Table Of Contents BEFORE USING THE PRODUCT 7 Copyright 7 Icons used in this manual 7 Symbols for safety precautions 8 Cleaning 8 Cleaning 9 Securing the Installation Space 9 Precautions for storage 10 Safety Precautions 10 Electricity and Safety 11 Installation and Safety 13 Operation and Safety 16 Correct posture to use the pr[...]

Table Of Contents Table Of Cont ents 3 29 Connection to Use "PCoIP" 29 LAN Connection 29 Connecting USB Devices 30 Connecting a Microphone 30 Connecting to Headphones or Speakers 30 Connecting a SERIAL cable 31 Connecting to a Secondary Monitor 31 Connecting the Power 32 Connect to the ho st PC using a LAN cable 33 Installing a USB-to-Ser[...]

Table Of Contents Table Of Cont ents 4 72 Contrast 72 Configuring Contrast 73 Sharpness 73 Configuring Sharpness 74 SAMSUNG MAGIC Bright 74 Configuring SAMSUNG MAGIC Bright 75 Coarse 75 Adjusting Coarse 76 Fine 76 Adjusting Fine CONFIGURING TINT 77 SAMSUNG MAGIC Color 77 Configuring SAMSUNG MAGIC Color 78 Red 78 Configuring Red 79 Green 79 Configur[...]

Table Of Contents Table Of Cont ents 5 SETUP AND RESET 85 Reset 85 Initializing Settings ( Reset ) 86 Language 86 Changing the Language 87 Display Time 87 Configuring Display Time 88 Menu Transparency 88 Changing Menu Transparency 89 Power Key 89 Enabling Power Key INFORMATION MENU AND OTHERS 90 INFORMATION 90 Displaying INFORMATION 90 Configuring [...]

Table Of Contents Table Of Cont ents 6 APPENDIX 104 Contac t SAMSUNG WORLD WIDE 110 Responsibility for the Pay Service (Cost to Customers) 110 Not a product defect 110 A Product damage caused by customer's fault 110 Others 111 Correct Disposal 111 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) 111 Correct dispos[...]

7 Before Using the Product Before Using the Product Copyright The content s of this man ual are sub ject to chang e without n otice to im prove qual ity. © 2012 Samsung Electronics Samsung Electro nics owns the copyrigh t for this manual. Use or reproduction of this manual in part s or entirety with out the autho rization of Samsung Electronic s i[...]

8 Before Using the Product Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and e xterior of ad vanced LCDs ar e easily scratche d. Take the following steps when c leaning. 1. Power off the monitor and computer . 2. Disconnect the power c ord from th e monitor. Hold the power cable by the plug and do not touch the[...]

9 Before Using the Product Before Using the Product Securing the Installation Space z Ensure some space aroun d the prod uct for ven tilation. An inte rnal tempe rature rise m ay cause fire and damage the produc t. Be sure t o allow the amount of sp ace as sho wn below o r greater w hen installing the pr oduct. The exterior may differ depending on [...]

10 Before Using the Product Before Using the Product Safety Precautions Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damage d power cor d or plug, o r a loos e power s ocket. z An electric shock or fire may re sult. Do not plug many prod uc[...]

11 Before Using the Product Before Using the Product Caution Installation and Safety Warning Do not unplug the power cor d when the p roduct is in us e. z The product may become damage d by an electric sho ck. Do not use the po wer cord for pr oducts other th an authorized pr oducts supp lied by Samsung. z An electric shock or fire may re sult. Kee[...]

12 Before Using the Product Before Using the Product Caution Do not install t he product on an unst able or vibr ating surfac e (insecure shelf, sloped surfa ce, etc.). z The product m ay fall and brea k or cause a personal injury. z Using the produ ct in an area w ith excess vibr ation may dama ge the prod uct or cause a fire. Do not install th e [...]

13 Before Using the Product Before Using the Product Operation and Safety Warning Put down the p roduct carefully. z The product m ay fall and brea k or cause a personal injury. Installing the product in a n unusual pl ace (a place e xposed to a lot of fine particles, chemical sub stances or extreme tem peratures, or an airpo rt or train station wh[...]

14 Before Using the Product Before Using the Product If there is a thunders torm or lightning str ike, turn off the po wer and disco nnect the power cable. z An electric shock or fire may re sult. Do not drop objects on the pr oduct or apply impact. z An electric shock or fire may re sult. Do not move the pr oduct by pulli ng the powe r cord or any[...]

15 Before Using the Product Before Using the Product Caution Leaving the screen fixed on a stationary im age for an extended per iod of time may cause a fterimage burn-in or defectiv e pixels. z If you are no t going to u se the pro duct for an extended p eriod of t ime, activate power-saving mode or a moving-pi cture screen saver. Disconnect the p[...]

16 Before Using the Product Before Using the Product Correct posture to use the product Exercise caut ion when ad justing the prod uct angle o r stand height. z Otherwis e, children' s fingers or hands may become stuc k and inju red. z Tilting th e produc t excessively ma y cause it to fall and result in p ersonal injury. Do not place heavy ob[...]

17 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging b ox. Be careful not t o damage the prod uct when you open t he packaging with a sharp instrum ent. 2 Remove the sty rofoam fr om the prod uct. 3 Check the compo nents and re move the styrofoam an d plastic bag . z The appearance of actual c[...]

18 Preparations 1 1 Preparations 1.1.2 Checking the Components z Contact the dealer from whom you purch ased the product if any item is missing. z The appearance of the components and items sold separately may differ from the image shown. Components Components may vary depending on the country. Quick setup gu ide Warranty car d (Not available in so[...]

19 Preparations 1 1 Preparations Items sold separately The following items can be purchased at your nearest retailer. LAN cable D-SUB cable USB cable RS232C cable Stereo cabl e DVI cable USB mouse Keyboard Headphone MIC[...]

20 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Icons Description z Open or close the onscreen display (OSD) m enu, or retu rn to the parent menu . z OSD control loc k: Maintain the curren t settings ,[...]

21 Preparations 1 1 Preparations Confirm a menu selection. Pressing the [ ] button when th e OSD menu is not displayed will change the inp ut source ( Cli ent / Analog ). If you power on the prod uct or change the inpu t source by pres sing the [ ] button, a messa ge that shows the changed in put source will appear at th e top left corner of the sc[...]

22 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n Connect to a n audio outp ut device such as headph ones. Connect t o a m icropho ne. Connect t o an audi o-input so urce usin g an audio cable. Conn[...]

23 Preparations 1 1 Preparations Connect to th e power c able. Speakers If the 11th digit of t he model code is M, th e model has inter nal speakers. E.g.) LF19NEBHBN M , LF24NEBHBN M Port Descriptio n ON POWER IN[...]

24 Preparations 1 1 Preparations 1.3 Installation 1.3.1 Attaching the cradle z Disassembly is the reverse order of assembly. z The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Place a protective clo th or cushion on a f lat surfac e. Next, place th e product w ith th[...]

25 Preparations 1 1 Preparations 1.3.2 Adjusting the Prod uct Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z To adjust the height, remove the fixing pin. z The monitor tilt and height can be adjusted. z Hold the top center of the product and adjus[...]

26 Preparations 1 1 Preparations 1.3.4 Installing a Wall-moun t Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Align the grooves and tightly fasten the screws on the b racket on the product with the correspon ding parts on the wall-moun t kit or deskto p stand you w ant to att ach. P[...]

27 Preparations 1 1 Preparations Notes z Using a screw longer than the standard length can damage the internal components of the product. z The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications. z Do not use screws that do not comply with the VESA standards. Do not attac[...]

28 2 Using "PCoIP" 2 Using "PCoIP" 2.1 What is a "PC over IP"? z This monito r can de code and d isplay the screen o f the s erver PC en coded and transmitted through the network ( LAN) as well a s display t he computer screen like a conventiona l monitor. T his monit or shows a far m ore improved p erformance than a n[...]

29 Using "PCoIP" 2 2 Using "PCoIP" 2.2 Connection to Use "PCoIP" z Do not conne ct the power cable bef ore connect ing all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable. 2.2.1 LAN Connection 1 Connect the L AN cable to [LAN] on t he back of th e produc t. z It is not suppo[...]

30 Using "PCoIP" 2 2 Using "PCoIP" 2.2.3 Connecting a Microphone 1 Connect a mi crophone to the [MIC] ja ck at the back of the produc t. 2.2.4 Connecting to H eadphones or Speakers 1 Connect an a udio outpu t device, su ch as head phones or speakers, to [ ] at the back of the product. 2.2.5 Connecting a SERIAL cable 1 Using the [...]

31 Using "PCoIP" 2 2 Using "PCoIP" 2.2.6 Connecting to a Secondary Monitor 1 Connect [DVI OUT] on the prod uct to [DVI IN] or [R GB IN] on anoth er monitor u sing a DVI or DVI to D-SUB cable. z The [DVI OUT] port can be used only to connect to a dual monitor. z Connect to the [DVI OUT] port to display th e same picture on anothe[...]

32 Using "PCoIP" 2 2 Using "PCoIP" 2.3 Connect to the host PC using a LAN cable The host PC must have an IP address. After connecting the LAN and setting the IP address, you can view the host PC screen on the monitor. Use the USB port to connect an external storag e device (DSC, MP3, external storage, etc.). Connecting one Host [...]

33 Using "PCoIP" 2 2 Using "PCoIP" 2.3.1 Installing a USB-to-Serial Driver Install the driver on the server PC. 1 Insert the driver inst allation CD- ROM into the CD-ROM drive. 2 Click on "USB-SERIAL Driver". 3 Click "Next". 4 In the "License Agre ement" window, se lect "I accept the terms of t[...]

34 Using "PCoIP" 2 2 Using "PCoIP" 5 Specify the "Des tination f older" pat h to install the pr ogram and click "Install". If the directory path is not specified, the program will be installed in the default directory path. 6 Click "Fin ish".[...]

35 Using "PCoIP" 2 2 Using "PCoIP" 2.4 "PCoIP" 2.4.1 On Screen Display (OSD) The On Screen D isplay (OSD) local G UI is displaye d to the user wh en the device is powered on and a PCoIP session is not in p rogress. The O SD lets the user connect to a host device throu gh the Connect window. The Co nnect window allows a[...]

36 Using "PCoIP" 2 2 Using "PCoIP" 2.4.3 OSD Options Menu Selecting the Options menu will display a list of selections. The OSD Options menu c ontains: z Configuration This option le ts you configure va rious settings for the device such as network sett ings, session type, language, and other se ttings. z Diagnostics This option[...]

37 Using "PCoIP" 2 2 Using "PCoIP" The OSD configuration options are a subset of the option s available in the Administrative Web Interface . To make changes to the configuration settings, you will need an administrator password. You do not need a password to view the Diagnostic and Information menus. Applicable only when the Pa[...]

38 Using "PCoIP" 2 2 Using "PCoIP" z Gateway The gateway IP address of the devic e. If DHCP is disabled, th is field is required. If DHCP is enabled, you cannot edit this field. z Primary DNS Server The primary D NS IP address of the device. This field is optional. If the DNS server IP ad dress is configured us ing the C onnecti[...]

39 Using "PCoIP" 2 2 Using "PCoIP" z When you make a change to one of the settings on this page, you must reboot your device for the change to take effect. Figure 2-4: IPv6 Configuration z Enable IPv6 Enable this field to enable IPv6 f or your PCoIP devices. z Link Local Addre ss This field is aut omatically po pulated. z Gatewa[...]

40 Using "PCoIP" 2 2 Using "PCoIP" z Enable SLAAC Enable this field to set up stat eless address auto -configuration (SLAAC) fo r your devices. z Enable Manual Address Enable this field to set up a manual (static ) address for the device. z Manual Address Enter the IP ad dress for the de vice. Label Tab The Label page is a vaila[...]

41 Using "PCoIP" 2 2 Using "PCoIP" Discovery Tab Use the sett ings on the Discovery Configuration page t o erase th e discovery o f hosts and c lients in your PCoIP system and dramatically reduce the co nfiguration and maintenance effo rt for complex systems. This discovery mechanism is independent of DNS SRV discovery. For SLP [...]

42 Using "PCoIP" 2 2 Using "PCoIP" Session Tab The Session pag e lets you co nfigure how the host o r client d evice connects to or acc epts connec tions from peer device s. The Session parameters can also be configured using the Administrative Web Interface. Figure 2-7: Sessio n Configur ation z Connection Type When you select [...]

43 Using "PCoIP" 2 2 Using "PCoIP" Language Tab The Language page lets you cha nge the user interface lang uage. z This setting affects the local OSD GUI. It is only available on the client. z The Language parameters can also be configured using the Administrative Web Interface. Figure 2-9: La nguage Configur ation z Language Co[...]

44 Using "PCoIP" 2 2 Using "PCoIP" OSD Tab The OSD pa ge allows the screen saver timeo ut to be s et using the On Screen Displa y parameter . z The OSD parameters can also be configur ed using the Administrative Web Interface. z The OSD page is only available on the client. It is unavailable on the host. Figure 2-10: OSD Configu[...]

45 Using "PCoIP" 2 2 Using "PCoIP" Figure 2-11: Display Configuratio n z Enable disp lay overri de This option is intended for legacy systems. It c onfigures t he client to send defaul t EDID information to the host w hen a mon itor canno t be detecte d or is no t attached to the client. In version s of Windows prior to Windows [...]

46 Using "PCoIP" 2 2 Using "PCoIP" Reset Tab The Reset P arameter s page let s you reset co nfiguration an d permissions to factory defa ult values stored in on board flash me mory. z Reset can also be initiated using the Administrative Web Interface. z Resetting parameters to factory default values do es not revert the firmware[...]

47 Using "PCoIP" 2 2 Using "PCoIP" The Administrat ive Web Int erface allow s you to ch ange the log filter settin g on the device which controls the level of detail o f the messages in the log. When you set the filte r to “terse,” t he device will log short and concise me ssages. The Event Log page allows you to enable an d[...]

48 Using "PCoIP" 2 2 Using "PCoIP" Figure 2-14: Sessio n Statisti cs z PCoIP Packets Statistics  PCoIP Packets Sent The total number of PCoI P packets sent in the curr ent/last session.  PCoIP Packets Received The total num ber of PCoIP packe ts received in t he current/last session.  PCoIP Packets Lost The total num be[...]

49 Using "PCoIP" 2 2 Using "PCoIP" Figure 2-15: PCoIP Processor[...]

50 Using "PCoIP" 2 2 Using "PCoIP" Ping Tab The Ping page allows you t o ping a d evice to see if it is reacha ble across t he IP networ k. This may he lp you determin e if a host is re achable. As a result of firm ware rele ases 3.2.0 an d later f orcing the “do not fragment” fla g in the ping co mmand, you ca n use this fe[...]

51 Using "PCoIP" 2 2 Using "PCoIP" Figure 2-17: Version z VPD Information Vital Product Data (VPD) is informat ion set by th e factory to uniquely iden tify each Portal or Host.  MAC Address Host/client un ique MAC addr ess  Unique Iden tifier Host/client un ique identifier  Serial Number Host/client un ique serial nu m[...]

52 Using "PCoIP" 2 2 Using "PCoIP" z Bootloader Information The Bootloa der informat ion reflect s the current PCoIP bootload er details.  Bootloader Version Version of the cu rrent bootload er  Bootloader Build ID Revision code o f the cu rrent boo tloader  Bootloader Build Date Build date o f the current b ootloader 2[...]

53 Using "PCoIP" 2 2 Using "PCoIP" VMware View Tab The VMwa re View page a llows conf iguratio n for use with a VMwar e View Con nection Se rver. z If VCS Certificate Check Mode Lockout is enabled from the Administrative Web Interface, users will not be able to modify the settings on this page. z The VMware View parameters can a[...]

54 Using "PCoIP" 2 2 Using "PCoIP" Mouse Tab The Mouse pa ge lets you change the m ouse curs or speed sett ings for the OSD sessions. The OSD mouse cursor speed setting does not affect the mouse cursor settings when a PCoIP session is active unless the Local Keyboard Host Driver function is being used. Refer to the "PCoIP H[...]

55 Using "PCoIP" 2 2 Using "PCoIP" Keyboard Tab The Keyboard page lets you ch ange the keyb oard repea t settings fo r the OSD se ssion. z The keyboard settings do not affect the keyboard settings when a PCoIP session is active unless the Local Keyboard Host Driver function is used. Refer to the "PCoIP Host Software for Win[...]

56 Using "PCoIP" 2 2 Using "PCoIP" Image The Image page allows you to m ake changes to the image quality of the PCoIP s ession. This app lies to sessions between PC oIP zero clients and PC oIP host cards in a remote workstation. To configur e the image quali ty settings fo r a VMware View virtual desktop, adjust the PCoIP sessio[...]

57 Using "PCoIP" 2 2 Using "PCoIP" Display Topology The Display Topology page allows users to chan ge the position, r otation, and resolu tion of a displa y for a PCoIP session. To apply the Display Topology feature to a PCoIP se ssion between a zer o client and a Virtual Mach ine (VM), VMware V iew 4.5 or late r is required. To[...]

58 Using "PCoIP" 2 2 Using "PCoIP" A maximum of two displays can be enabled at the same time. z Alignment Select how you wa nt displays A and B aligned wh en they are differ ent sizes. This setting affects which area of the screen to use when you move the cursor from one display to the other. The alignment options that appear in[...]

59 Using "PCoIP" 2 2 Using "PCoIP" Touch Screen The Touch Screen page allows you to co nfigure and c alibrate cer tain settings of an attache d Elo TouchSyste ms touch screen display. The Touch Screen page is only available through the OSD. It is not available in the Administrative Web Interface. Figure 2-23: Touch Screen z Enab[...]

60 Using "PCoIP" 2 2 Using "PCoIP" 2.4.8 Password Window This option is available through the Management console p rogram. The Pass word page lets you update the local administ rative passwo rd for the device . The password can be a maximum of 20 characters . Some PCoIP devices have passwor d protection disa bled by default. The[...]

61 Using "PCoIP" 2 2 Using "PCoIP" Figure 2-25: Authorized Password Reset Details on how to use PCoIP are subject to change wi thout notice. To view the latest information, visit the Teradici website at http://www.teradici.com.[...]

62 Using "PCoIP" 2 2 Using "PCoIP" 2.4.9 Wake On LAN This feature allows you to power on the product by sendin g a pre-determine d command fro m an external system to the product over a network. Make sure the ne twork is capabl e of data com munication wi th the PC that se nds the command to the product. Ensu re you hav e a prog[...]

63 Using "PCoIP" 2 2 Using "PCoIP" 2.4.10 Wake on USB If you turn off the power afte r activating Wake On USB on the product admini strative web pa ge, the system switches to standby mode. The Wake on USB feature switches the system from standby mode to normal mode if a change to the keyboard or mouse in put is detected. Changes[...]

64 Using "PCoIP" 2 2 Using "PCoIP" 2.4.11 OSD Logo Upload Using the OSD Logo Upload page, change the lo go displa yed on the Teradici OSD . Configuring the sett ings 1 Set the product and PC IP addresse s to enable the prod uct to connect to the PC over a network. 2 Enter the IP a ddress set for th e produc t in the URL ad dress[...]

65 3 Connecting and Us ing a Source Device 3 Connecting and Using a Source Device 3.1 Before Connecting 3.1.1 Pre-connection Checkpoints z Before connectin g a source d evice, read th e user manu al provided with it. The number and locations of ports o n source de vices may diffe r from de vice to devic e. z Do not connec t the power cable until al[...]

66 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2 Connecting and Using a PC 3.2.1 Connecting to a PC z Do not conne ct the power cable bef ore connect ing all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable. z Select a connection m ethod suit able for your PC. Connecti[...]

67 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.2 "Windows Driv er" Installation z You can set the optimum resolution and frequency for this product by installing the corresponding drivers. z An installation driver is contained on the CD supplied with the product. 1 Insert the user ma nual CD provided[...]

68 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.3 Setting Optimum Resolution An information message abou t setting optimum resolution will appear if you power on the product for the first time after purchase. Select a langua ge and ch ange the resolution to t he optimum v alue. 1 Press [ ] to move to the la ngu[...]

69 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.2.4 Changing the Re solution Using a PC z Adjust the resolution and refresh rate in Control Panel on you r PC to obtain optimum picture quality. z The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windo[...]

70 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolution an d change t he r esolution . 12 34[...]

71 4 Screen Setup 4 Screen Setup Configure the screen settings such as brightness and color tone. 4.1 Brightness You can adjust the general bright ness of the pic ture. (Range: 0~1 00) A higher value wil l make the pictu re appear brighter. This menu is not available when Bright is set to Dynamic Contrast mode. 4.1.1 Configuring Brightness 1 Press [...]

72 Screen Setup 4 4 Screen Setup 4.2 Contrast Adjust the cont rast between the objects a nd backgro und. (Range: 0~100) A higher va lue will increase t he contr ast to mak e the obje ct appear clearer . z This menu is not available when Bright is in Cinema or Dynamic Contrast mode. z This menu is not available when Color is in Full or Intelligent m[...]

73 Screen Setup 4 4 Screen Setup 4.3 Sharpness Make the ou tline of objec ts more clear or blurry. (R ange: 0~ 100) A higher va lue will m ake the outline of objects cle arer. z This menu is not available when Bright is in Cinema or Dynamic Contrast mode. z This menu is not available when Color is in Full or Intelligent mode. 4.3.1 Configuring Shar[...]

74 Screen Setup 4 4 Screen Setup 4.4 SAMSUNG MAGIC Bright This menu provides an optimum picture qu ality suitable for the enviro nment where the pr oduct will be used. You can customize the brigh tness to suit your preferences. 4.4.1 Configuring SAMSUNG MAGIC Bright 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, [...]

75 Screen Setup 4 4 Screen Setup 4.5 Coarse Adjust the scre en frequenc y. This menu is available in Analog mode only. 4.5.1 Adjusting Coarse 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display the corresp onding menu scre en. 2 Press [ ] to move to Picture and pres s [ ] on the prod uct. 3 Press [...]

76 Screen Setup 4 4 Screen Setup 4.6 Fine Fine-adjust the sc reen to obt ain a vivid p icture. This menu is available in Analog mode only. 4.6.1 Adjusting Fine 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display the corresp onding menu scre en. 2 Press [ ] to move to Picture and pres s [ ] on the [...]

77 5 Configuring Tint 5 Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema or Dynamic Contrast mode. SAMSUNG MAGIC 5.1 SAMSUNG MAGIC Color Color is a new picture-q uality improvem ent technolog y develope d independen tly by Samsun g, which delivers vivid natur al colors witho ut picture quality [...]

78 Configuring Tint 5 5 Configuring Tint 5.2 Red Adjust the valu e of the c olor red in th e picture. (Range: 0~1 00) A higher value wil l increase the in tensity of the c olor. This menu is not available when Color is in Full or Intelligent mode. 5.2.1 Configuring Red 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ex[...]

79 Configuring Tint 5 5 Configuring Tint 5.3 Green Adjust the valu e of the c olor green in the picture . (Range: 0 ~100) A higher value wil l increase the in tensity of the c olor. This menu is not available when Color is in Full or Intelligent mode. 5.3.1 Configuring Green 1 Press any butt on on t he front of the pro duct to display the OSD guide[...]

80 Configuring Tint 5 5 Configuring Tint 5.4 Blue Adjust the valu e of the c olor blue in the picture. ( Range: 0 ~100) A higher value wil l increase the in tensity of the c olor. This menu is not available when Color is in Full or Intelligent mode. 5.4.1 Configuring Blue 1 Press any butt on on t he front of the pro duct to display the OSD guide. N[...]

81 Configuring Tint 5 5 Configuring Tint 5.5 Color Tone Adjust the gen eral color tone of the pictur e. This menu is not available when Color is in Full or Intelligent mode. 5.5.1 Configuring the Color Tone Settings 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display the corresp onding menu scre e[...]

82 Configuring Tint 5 5 Configuring Tint 5.6 Gamma Adjust the mid-ra nge brig htness (Gam ma) of the p icture. 5.6.1 Configuring Gamma 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display the corresp onding menu scre en. 2 Press [ ] to move to COLOR and press [ ] on the product. 3 Press [ ] to move[...]

83 6 Resizing or Relocating the Screen 6 Resizing or Relocating the Screen 6.1 H-Position & V-Position H-Position : Move the scre en to the left or right. V-Positio n : Move the scre en up or down. This menu is available in Analog mode only. 6.1.1 Configuring H-Position & V-Position 1 Press any butt on on t he front of the pro duct to displ[...]

84 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 6.2 Menu H-Position & Menu V-Position Menu H-Position : Move the menu position to th e left or right . Menu V-Position : Move the menu position up o r down. 6.2.1 Configuring Menu H- Position & Menu V-Position 1 Press any butt on on t he front of the pro duct to disp[...]

85 7 Setup and Reset 7 Setup and Reset 7.1 Reset Return all the sett ings for the p roduct to the de fault factory se ttings. 7.1.1 Initializing Settings (Reset) 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display the corresp onding menu scre en. 2 Press [ ] to move to SETUP&RESET and press [ [...]

86 Setup and Reset 7 7 Setup and Reset 7.2 Language Set the menu language. z A change to the language setting will only be applied to the onscreen menu display. z It will not be applied to other functions on your PC. 7.2.1 Changing the Language 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display t[...]

87 Setup and Reset 7 7 Setup and Reset 7.3 Display Time Set the on-screen disp lay (OSD) menu t o automatica lly disappear if the menu is n ot used for a sp ecified period of time. Display Time can be used to spec ify the time afte r which you wa nt the OSD m enu to disa ppear. 7.3.1 Configuring Display Time 1 Press any butt on on t he front of the[...]

88 Setup and Reset 7 7 Setup and Reset 7.4 Menu Transparency Set the transp arency for th e menu w indows: 7.4.1 Changing Menu Transparency 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display the corresp onding menu scre en. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Pr[...]

89 Setup and Reset 7 7 Setup and Reset 7.5 Power Key The power butto n on the product is used to perform two func tions. The default setting is Power Off . 7.5.1 Enabling Power Key 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display the corresp onding menu scre en. 2 Press [ ] to move to SETUP&[...]

90 8 INFORMATION Menu a nd Others 8 INFORMATION Menu and Others 8.1 INFORMATION View the current i nput sour ce, freq uency and r esolutio n. 8.1.1 Displaying INFORMATION 1 Press any butt on on t he front of the pro duct to display the OSD guide. N ext, press [ ] to display the corresp onding menu scre en. 2 Press [ ] to move to INFORMATION . The c[...]

91 9 Installing the Software 9 Installing the Software 9.1 Natural Color 9.1.1 What is Natural Color? One of the p roblems with using a PC is that the colors you see on t he screen ar e different fr om the colo rs of printed p ictures or s ource images input throug h a scanne r or digital camera. N atural Color is a color managemen t system develop[...]

92 Installing the Software 9 9 Installing the Software 9.2 MultiScreen The MultiScreen program can be installed on the VDI server's virtual machine or on a host PC with a compatible Windows-series operating system. Virtual Desktop Infrastructure: a PC equipped with VMware View and Teradici Hostcard MultiScreen ena bles users t o use the m onit[...]

93 Installing the Software 9 9 Installing the Software "Hardware" z At least 32MB of memory z At least 60MB o f free space o n the hard disk drive 9.2.2 Removing the Software Click [ Start ], select [ Settings ]/[ Control Panel ], and then double-clic k [ Add or Remove Programs ]. Select "MultiScre en" from th e program list and[...]

94 10 Troubleshooting Guide 10 Troubleshooting Guide 10.1 Requirements Before Co ntacting Samsung Customer Service Center 10.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is op erating norm ally by using [...]

95 Troubleshooting Guide 10 10 Troubleshooting Guide Not Optimum Mode is displayed. This message ap pears if the sign al from the graphics car d exceeds t he maximum reso lution or frequency fo r the produ ct. Change the maximu m resolution and freque ncy to suit the produ ct performanc e, referring t o Standard Si gnal Mode Table (page 101). The i[...]

96 Troubleshooting Guide 10 10 Troubleshooting Guide 10.2 Q & A Question Answer How can I change the frequency? Set the freque ncy on your grap hics card. z Windows XP: Go to Control Panel Appearance an d Themes Display Settings Advanced Monitor , and adjust Refres h rate under Monito r settings . z Windows ME/2000: Go to Contr ol Panel Display[...]

97 Troubleshooting Guide 10 10 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the resolution? z Windows XP: Go to Control Panel Appearance and Themes Display Settings , and adjust the resolution. z Windows ME/2000: Go to Control Pan el Display Settings , and adjus[...]

98 11 Specifications 11 Specifications 11.1 General Model Name NC191 NC241 Panel Image Size 19 Inches (48 c m) 23.6 Inches (60 cm) Display area 376.32 mm (H) x 301.06 mm (V) 14.8 inches (H) x 11.8 inch es (V) 521.28 mm (H) x 293.22 mm (V) 20.5 inches (H) x 11.5 inches (V) Synchroniz ation Horizontal Frequency 31 ~ 80 kHz Vertical Frequency 56 ~ 75 [...]

99 Specifications 11 11 Specifications The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. Environme ntal considerati ons Operatin g Temperature : 50˚F ~ 104˚F (10 ˚C ~ 40˚C) Humidity : 10 % – 80 %, non-conde nsing Storage Temperature : -4˚F ~ 113˚F (-20 ˚C ~ 45˚C) [...]

100 Specifications 11 11 Specifications 11.2 PowerSaver The power-sa ving funct ion of this p roduct redu ces power c onsumption by switching o ff the scree n and changing the co lor of the pow er LED if the prod uct is not used for a specified period of tim e. The power is not turned off in powe r-saving mode. To swit ch the screen back on , press[...]

101 Specifications 11 11 Specifications 11.3 Standard Signal Mode Table z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you sel[...]

102 Specifications 11 11 Specifications NC241 VESA,1280 x 80 0 49.702 59.810 83 .500 -/+ VESA,1280 x 96 0 60.000 60.000 108.000 +/+ VESA,1280 x 1024 63.981 60.020 108.000 +/+ VESA,1280 x 1024 79.976 75.025 135.000 +/+ Resolution Horizontal Frequen cy (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) IBM,640 x 350 31.469 70.086 25[...]

103 Specifications 11 11 Specifications z Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. z Vertical Frequency Repeating the same picture dozens[...]

104 Appendix Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7 864) http://www.samsun g.com CANADA 1-800-SAMSUNG (726-78 64) http://www.samsung. com/ca (English) http://www.samsung.com/ca _fr (French) MEXI[...]

105 Appendix Appendix GUATEMALA 1-800-299-0013 http://www.samsung .com/latin (Spanish) http://www.samsun g.com/latin_en (English) HONDURAS 800-27919267 http://www. samsung.com /latin (Spanish) http://www.samsun g.com/latin_en (English) JAMAICA 1-800-234-7267 http://www.samsung.com NICARAGUA 00-1800-507726 7 http://www.samsung .com/latin (Spanish) h[...]

106 Appendix Appendix CZECH 800 - SAMSUNG (800-726786) http://www.samsu ng.com DENMARK 70 70 19 70 http://www.s amsung.com EIRE 0818 717100 http://www.s amsung.com ESTONIA 800-7267 http://www.samsung .com FINLAND 09 85635050 http://www. samsung.com FRANCE 0 1 48 63 00 00 http://www.samsung.com GERMANY 0180 5 SAMSUNG bzw. 0180 5 7267 864* (*0,14 €[...]

107 Appendix Appendix SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung .com SWITZERLAND 0848-SAMSUNG (7267864, CHF 0.08 /min) http://www.sam sung.com/ch (German) http://www.samsung.com/ch _fr (French) U.K 0330 SAMSUNG (7267864) http://www.s amsung.com CIS ARMENIA 0-800-05-555 http://www.s amsung.com AZERBAIJAN 088-55-55-55 5 http://www.samsu ng.co[...]

108 Appendix Appendix INDIA 1800 110 0 11 3030 8282 1800 3000 8282 1800 266 828 2 http://www.sam sung.com INDONESIA 0800-112-8888 021-5699- 7777 http://www.sam sung.com JAPAN 0120-327-527 http ://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsun g.com NEW ZEALAND 0800 SAMSUNG (0800 726 786 ) http://www.samsung .com PHILIPPINES 1-800-10- SAMSU[...]

109 Appendix Appendix MOROCCO 080 100 2255 http://www.samsu ng.com OMAN 800-SAMSUNG (726-7864) http://www.samsu ng.com/ae (English) http://www.sam sung.com/ae _ar (Arabic) SAUDI ARABIA 9200 -21230 http://ww w.samsung.com/a e (English) http://www.sam sung.com/ae _ar (Arabic) TURKEY 444 77 11 http://www.s amsung.com U.A.E 800-SAMSUNG (726-7864) http:[...]

110 Appendix Appendix Responsibility for the Pay Se rvice (Cost to Customers) When the service is requested, in spite of in warra nty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustme nt, Explanation, Re-installation and etc . z If a service tech nician gives inst[...]

111 Appendix Appendix Correct Disposal Correct Disposal of This Product (Waste Electri cal & Electronic Equipment) Correct disposal of batteries in this product (Applicable in countries w ith separate c ollection systems) This marking on th e product, ac cessories or literatu re indicates that t he product an d its electronic acce ssories (e.g.[...]

112 Appendix Appendix Terminology OSD (On Screen Display) On screen display (OSD) a llows you to customize on-scr een settings to optimi ze the picture quality a s required. You can chan ge the scree n brightness, t int, size an d many othe r settings using menu s displayed on the screen. Coarse Coarse refers t o the frequenc y of radio wave vibrat[...]

113 Appendix Appendix Vertical Frequency One image is m ade of num erous horizon tal lines. The vertical freq uency is measur ed in Hz an d represents how many images can be crea ted per seco nd by those horizontal lines. A vertical frequency o f 60 means t hat an imag e is transmit ted 60 times per secon d. The vertica l frequency is also called &[...]

Index 114 Index Symbols "PCoIP" 35 B Before Co nnecting 65 Blue 80 Brightness 71 C Checking the C ontents 17 Cleaning 8 Coarse 75 Color Tone 81 Configuring Volume in the Initial Screen 90 Connect to the host PC using a LAN cable 32 Connecting and Using a PC 66 Connection to Us e "PCoIP" 29 Contact SAMSUNG WORLD WIDE 104 Contrast[...]

Index Index 115 T Terminology 112 W What is a "PC o ver IP"? 28[...]