Samsung SCB-6000 инструкция обслуживания

HD-SDI CAMERA User Manual SCB-6000[...]

Copyright ©2011 Samsung T echwin Co., Ltd. All rights reserved. T rademark is the registered logo of Samsung T echwin Co., Ltd. The name of this product is the registered trademark of Samsung T echwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company . Restriction Samsung T echwin Co., Ltd[...]

English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions. 8. Do not i[...]

over view 4_ overview W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be pl[...]

English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the ap[...]

over view 6_ overview Please read the following recommend safety precautions carefully.  Do not place this apparatus on an uneven surface.  Do not install on a surface where it is exposed to dir ect sunlight, near heating equipment or heavy cold area.  Do not place this apparatus near conductive material.  Do not attempt to service this[...]

English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 8 Product Features 9 What’ s Included 10 At a Glance INST ALLA TION & CONNECTION 13 13 Mounting the Lens 15 Connecting with other Device OPERA TING YOUR CAMERA 18 18 Menu Configuration 19 Menu Setup APPENDIX 32 32 Specification 34 Product Overview 35 T roubleshooting[...]

over view 8_ overview PRODUCT FEA TURES • Supports Full HD-SDI Video By adopting a diagonal 6mm (1/3”) 2M pixel CMOS, the camera produces clear picture quality . • Excellent low-illumination image quality By adopting high-sensitive colour CMOS, the camera provides clear image quality under a severe low illumination condition of 0.017 Lux (wit[...]

English _9 ● OVERVIEW WHA T’S INCLUDED Check if the main unit and all the following accessories are included in the product package. Appearance Item Name Quantity Description Camera 1 User Manual 1 Quick Guide 1 C Mount Adapter Auto Iris Lens Connector 1 Used to install the camera lens Cable for the testing monitor 1 Used to test the camera con[...]

over view 10_ overview A T A GLANCE Front Side Item Description  Camera Holder (Mount) Holes Used when you mount the camera onto the bracket by fixing the camera holder (mount) adaptor with the bracket. b Auto Iris Lens (Optional) Installed on the lens adaptor. c Auto Iris Lens Connector Used to supply power and output signal to control the iris[...]

English _11 ● OVERVIEW Rear Side Item Description  HD-SDI Video Out terminal BNC terminal for HD-SDI video signal output. b Power LED This lamp turns green when the proper power is applied to the camera. c C-VIDEO Analogue video output terminal of C-Video. Use a monitor cable for testing the camera with a portable display. (for installation) ?[...]

over view 12_ overview Item Description  Power Port Used to plug the power cable.  GND Used for earth-grounding.  I/O Port 1:GND Earth-grounding port for external signal. 2:EXT_D/N External signal input port for Day/Night mode setup. 3:MD_OUT Output port that signals when a motion is detected. 4:RS-485+ Signal port for RS-485 communication[...]

English _13 ● INST ALLA TION & CONNECTION installation & connection MOUNTING THE LENS Disconnect the power before proceeding. M  The C lens and CS lens are not included in the product package. J  If using a normal commercial lens, you may encounter out of focus when switching to BW mode . T o prevent this, it is recommended to use t[...]

installation & connection 14_ installation & connection Connecting the Auto Iris Lens connector Insert the lens connector into the corresponding hole of the camera. Focusing Turn the lens left or right to control the zoom and focus the lens so that you can view a clear, sharp object.[...]

English _15 ● INST ALLA TION & CONNECTION CONNECTING WITH OTHER DEVICE Connecting to the monitor Connect the video out port of the camera to the video input port of the monitor. M  In the initial installation of the camera, you can connect the camera to the monitor for checking the connection status.  When connecting a general monitor d[...]

installation & connection 16_ installation & connection External Day/Night Switching Input Day/Night mode of the camera can be switched by signal from an external device. M  T o use this function, < DA Y/NIGHT > setting of the camera should be set to the < EXTERN >. (Page 27) Motion Detection Signal Out Upon a motion detectio[...]

English _17 ● INST ALLA TION & CONNECTION Resistance of copper wire [at 20°C (68°F)] Wire specification (AWG) #24(0.22mm 2 ) #22(0.33mm 2 ) #20(0.52mm 2 ) #18(0.83mm 2 ) Resistance (Ω/m) 0.078 0.050 0.030 0.018 Voltage Drop (V/m) 0.028 0.018 0.011 0.006 Recommended Distance (m) Less than 20 Less than 30 Less than 30 Less than 30 • As sho[...]

18_ Operating Y our Camera MENU CONFIGURA TION MAIN SETUP LENS • DC • MANUAL EXPOSURE • BRIGHTNESS • SHUTTER • AGC • SENS-UP • RETURN WHITE BAL • ATW • OUTDOOR • INDOOR • MANUAL • AWC ➝ SET SSDR • OFF • ON BACKLIGHT • OFF • BLC • HLC SSNR3 • ON • OFF DAY/NIGHT • AUTO • EXTERN • COLOR • B/W SPECIAL •[...]

English _19 ● OPERA TING YOUR CAMERA MENU SETUP To configure the camera’s function settings, use the button on the rear side of the product. • ▲▼ : Moves up/down in menu. • ◄► : Moves right/left in menu. • SET : Press the switch to set the function in camera menu. T o move to a sub-menu item in the menu, pr ess this switch. 1. Pre[...]

Operating Y our Camera 20_ Operating Y our Camera 3. Use the Up/Down buttons to select a desired function. • Move the button right or left to display available values or settings. Set the desired setting value using the button. 4. T o finish, select < EXIT > and pr ess the SET button. M  An item with the icon also has sub menus. T o sele[...]

English _21 ● OPERA TING YOUR CAMERA EXPOSURE 1. When the SETUP menu screen is displayed, select < EXPOSURE > by using the Function Setup switch so that the arrow indicates < EXPOSURE > . 2. Select a desired mode using the Function Setup switch. • BRIGHTNESS : Adjust the scr een brightness. • SHUTTER : Y ou can select the shutter [...]

Operating Y our Camera 22_ Operating Y our Camera • AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the scr een - but the greater the noise. - OFF : Not being used - Low : Allows automatic gain control from 5.3dB to 20dB. - Medium : Allows automatic gain control from 5.3dB to 26dB. - High : Allows automatic gain control from 5.3d[...]

English _23 ● OPERA TING YOUR CAMERA WHITE BAL (WHITE BALANCE) Use the White Balance function to adjust the screen color. 1. When the SETUP menu screen is displayed, select < WHITE BAL >. by using the Function Setup switch so that the arrow indicates < WHITE BAL >. 2. Select a desired mode using the Function Setup switch. Select one o[...]

Operating Y our Camera 24_ Operating Y our Camera SSDR (SAMSUNG SUPER DYNAMIC RANGE) SSDR illuminates darker areas of an image while retaining the same light level for brighter areas to even out the overall brightness of images with high contrast between bright and dark areas. 1. When the SETUP menu screen is displayed, select < SSDR > by usi[...]

English _25 ● OPERA TING YOUR CAMERA BACKLIGHT This camera is designed so that it delivers a distinctive subject and background at the same time, even when the subject is in backlight, by adopting a function of the proprietary WN2 DSP chip. 1. When the SETUP menu screen is displayed, select < BACKLIGHT > by using the Function Setup switch s[...]

Operating Y our Camera 26_ Operating Y our Camera SSNR3 This function reduces the background noise in a low luminance environment. 1. When the SETUP menu screen is displayed, select < SSNR3 > by using the Function Setup switch so that the arrow indicates < SSNR3 >. 2. Select a desired mode using the Function Setup switch. •O N : Activ[...]

English _27 ● OPERA TING YOUR CAMERA • AUTO : The mode is switched to < COLOR > in a normal environment, but switches to < B/W > mode when ambient illumination is low . T o set up the switching time for AUTO mode, press the Function Setup switch. - DWELL TIME : You can select day/night switching delay time from. ➝ 5s, 7s, 10s, 15s[...]

Operating Y our Camera 28_ Operating Y our Camera • CAM TITLE : If you enter a title, the title will appear on the monitor . 1) If the SPECIAL menu screen is displayed, use the Function Setup switch so that the arrow indicates < CAM TITLE >. 2) Set it to < ON > by using the Function Setup switch. 3) Press the Function Setup switch. 4)[...]

English _29 ● OPERA TING YOUR CAMERA • IMAGE ADJ : 1) When the SPECIAL menu screen is displayed, select < IMAGE ADJ > by using the Function Setup switch so that the arrow indicates < IMAGE ADJ >. 2) Select a desired mode using the Function Setup switch. - MONITOR : Please change the settings value of video appropriate to your monito[...]

Operating Y our Camera 30_ Operating Y our Camera • MOTION DET : This pr oduct has a feature that allows you to observe movement of objects in 4 differ ent areas on the screen, and the wor ds < MOTION DET > appear on the screen when movement is detected. Y ou can monitor activity more efficient. 1) When the SPECIAL menu screen is displayed,[...]

English _31 ● OPERA TING YOUR CAMERA • COMM ADJ (Communication Adjustment) : This function sets up the camera communication status when controlling the camera through an external control device. 1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow indicates < COMM ADJ >. 2) Set up the mode using [...]

32_ appendix SPECIFICA TION Items Description Video Video 1/3" Progressive Scan CMOS Total Pixels 2,010(H) x 1,108(V), 2.2M Pixels Effective Pixels 1,944(H) x 1,092(V), 2.1M Pixels Scanning System Progressiv Scan Min. Illumination Color : 1Lux @ F1.2, 0.017 Lux (Sens-up, 60x) B/W : 0.1 Lux @ F1.2, 0.0017 Lux ( Sens-up, 60x) S / N Ratio 50dB (A[...]

English _33 ● APPENDIX Items Description Operational Privacy Masking Off / On (16 Rect-angle zones) Sens-up (Frame Integration) 2x ~ 60x Gain Control Off / Low / Middle / High White Balance ATW / Outdoor / Indoor / Manual / AWC (1,700K° ~ 11,000K°) Electronic Shutter Speed Esc / A.FLK / Manual / Fixed Digital Zoom Off / On (1x ~ 16x) Reverse Of[...]

appendix 34_ appendix PRODUCT OVERVIEW Unit : mm (inch) 72(2.83") 60(2.36") 138.6 (5.45") 136.8 (5.38")[...]

English _35 ● APPENDIX TROUBLESHOOTING PROBLEM SOLUTION Nothing appears on the screen.  Check that the power cord and line connection between the camera and monitor are properly connected.  When the camera’s HD-SDI BNC output is directly connected to the monitor’s BNC terminal: Make sure the monitor supports HD-SDI signal input.  Whe[...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has[...]

[...]

[...]

[...]

SALES NETWORK SAMSUNG TECHWIN CO ., L TD. Samsungtechwin R&D Center , 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 F AX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 T oll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-3[...]