Samsung SCC-B531xBN инструкция обслуживания

User’ s Guide SCC-B531x(B) Digital Color Dome Camera ENG FRE SP A JAP AB68-00647C(01)Eng.indd 1 2007-05-14 ｿﾀﾈﾄ 4:22:41[...]

2 3 This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. T o prevent damage which may result in fire or electric shock hazard, do not expose th[...]

2 ENG 3 9. If this product fails to operate normally , contact the nearest s ervice center . Never disassemble or modify this product in any way . (SAMSUNG is not liable for problems caused by unauthorized modifications or attempted repair .) 10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or elec[...]

4 5 IMPORT ANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should be ad[...]

4 ENG 5 IMPORT ANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should b[...]

6 7 17) Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with [...]

6 ENG 7 Overview ...................................................................................... 8 About this guide ............................................................................ 8 Product overview ........................................................................... 8 Main features .......................................[...]

8 9 ❚ About this guide This user guide includes basic instructions for the product. It is recommended that all users read this guide before use. This guide is divided as follows:  Chapter 1, “Overview ,” introduces the user guide and product related information. (This chapter)  Chapter 2, “Installation,” explains how to set and inst[...]

8 ENG 9 Components of your camera Y our camera has the following components: 1. Cover dome : Covers the lens and main body to protect them. 2. Main body : Includes a lens, a switch board, a PCB board, screws, and such. 3. Locker : Used to open or close the Cover dome. T o open the cover dome, press the locker . 4. Tilt fixing screw : Using this sc[...]

10 1 1 ❚ Setting switches Setting function switches T o set the available functions on your camera, adjust eight switches as shown below: Installation No Name Brief description 1 LL Line lock ON/OFF 2 LSS Sens-up or Low speed shutter ON/OFF 3 H-REV Horizontal reverse ON/OFF 4 V -REV V ertical reverse ON/OFF 5 BLC Backlight compensation ON/OFF 6 A[...]

10 ENG 1 1 2. Switch 2 (LSS) : This sens-up mode accumulates the image fields in memory to reduce noise but increase the brightness and contrast rate. When this switch is set to ON , the camera automatically switches to a maximum of 128 times of image acquisition speed to implement a clear picture for darker image. 3. Switch 3 (H -REV) : When this[...]

12 13 ❚ Connecting cables and setting switches T o connect cables 1. Connect the BNC cable to the Video connector attached on your camera. 2. Connect the BNC cable to the Video Input on a monitor . 3. Connect the power adapter to the Power connector attached on your camera. When the monitor is turned on, the camera image appears. T o check the ca[...]

12 ENG 13 ❚ Installing camera Before installation Before installing your camera, you have to read the following cautions:  Y ou have to check whether the location (ceiling or wall) can bear five times the weight of your camera.  Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may [...]

14 15 4. When you install the Mount bracket on the ceiling, remove the Ceiling mount opener by pressing it hard to connect the line attached on your camera through the hole in the ceiling. Otherwise, you can use the empty space opposite to the CAMERA FRONT sign for line connection. 5. Now attach the Main body to the Mount bracket by rotating it in [...]

14 ENG 15 SCC-B531X AB68-00647C(01)Eng.indd 15 2007-05-14 ｿﾀﾈﾄ 4:23:15[...]

16 17 Appendix A: Specifications for NTSC Standard Item Details Product type CCTV color dome camera Power input AC 24V ± 10% (60Hz ± 0.3 Hz), DC 12V +10%/-5% Broadcast type NTSC Standard color system (525 Lines, 60 Fields) Power consumption Approx. 1.6W Image device 1/3 inch IT T ype Super-HAD CCD Pixels SCC-B531 1N, B5313N, B5315N SCC-B5310N T [...]

16 ENG 17 Item Details Controls Line Lock (LL) Sens-up; Low Speed Shutter(LSS) Horizontal Reverse (H-REV) V ertical Reverse (V-REV) Backlight compensation (BLC) Auto gain control (AGC) Switching between color and B&W by day and night change (D/N) Automatic white balancing (AWB) Digital noise reduction (DNR) Dynamic CCD defect compensation Produ[...]

18 19 Appendix B: Specifications for P AL Standar d Item Details Product type CCTV color dome camera Power input AC 24V ± 10% (50Hz ± 0.3 Hz), DC 12V +10%/-5% Broadcast type P AL Standard color system (625 Lines, 50 Fields) Power consumption Approx. 1.6W Image device 1/3 inch IT T ype Super-HAD CCD Pixels SCC-B531 1P , B5313P , B5315P SCC-B5310P[...]

18 ENG 19 Item Details Controls Line Lock (LL) Sens-up; Low Speed Shutter(LSS) Horizontal Reverse (H-REV) V ertical Reverse (V-REV) Backlight compensation (BLC) Auto gain control (AGC) Switching between color and B&W by day and night change (D/N) Automatic white balancing (AWB) Digital noise reduction (DNR) Dynamic CCD defect compensation Produ[...]

AB68-00647C(01)Eng.indd 20 2007-05-14 ｿﾀﾈﾄ 4:23:16[...]