Samsung SCC-B5352SN инструкция обслуживания

User’ s Guide SCC-B535x(S) Digital Color Dome Camera ENG FRE SP A JAP AB68-00648C(01)Eng.indd 1 2007-03-22 ｿﾀﾈﾄ 3:02:16[...]

2 3 This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product. T o prevent damage which may result in fire or electric shock hazard, do not expose th[...]

2 ENG 3 8. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center . Contin ued use in such a condition may cause fire or electric shock. 9. If this product fails to operate normally , contact the nearest s ervice center . Never disassemble or m[...]

4 5 IMPORT ANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should be ad[...]

4 ENG 5 IMPORT ANT SAFETY INSTRUCTIONS 1. Read Instructions – All the safety and operating instructions should be read before the product is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the product and in the operating instructions should b[...]

6 7 17) Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with [...]

6 ENG 7 Overview ....................................................................................... 8 About this guide ............................................................................ 8 Product overview ........................................................................... 8 Main features ......................................[...]

8 9 ❚ About this guide This user guide includes basic instructions for the product. It is recommended that all users read this guide before use. This guide is divided as follows:  Chapter 1, “Overview ,” introduces the user guide and product related information. (This chapter)  Chapter 2, “Installation,” explains how to set and inst[...]

8 ENG 9 Components of your camera Y our camera has the following components: 1. Cover dome : Covers the inner cover , lens, and main body to protect them. 2. Inner cover : Covers the main body to protect it. 3. Wing locker : Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover . 4. Main body[...]

10 1 1 ❚ Setting switches Setting function switches T o set the available functions on your camera, adjust eight switches as shown below: Installation No Name Brief description 1 LL Line lock ON/OFF 2 LSS Sens-up or Low speed shutter ON/OFF 3 H-REV Horizontal reverse ON/OFF 4 V -REV V ertical reverse ON/OFF 5 BLC Backlight compensation ON/OFF 6 F[...]

10 ENG 1 1 2. Switch 2 (LSS) : This sens-up mode accumulates the image fields in memory to reduce noise but increase the brightness and contrast rate. When this switch is set to ON , the camera automatically switches to a maximum of 128 times of image acquisition speed to implement a clear picture for darker image. 3. Switch 3 (H -REV) : When this[...]

12 13 ❚ Connecting cables and changing the settings Before installing your camera, you have to adjust the lens focus, zoom, and switch settings. T o connect cables 1. Connect the BNC cable to the Video connector attached on your camera. 2. Connect the BNC cable to the Video Input on a monitor . 3. Connect the power adapter to the Power connector [...]

12 ENG 13 ❚ Installing camera Before installation Before installing your camera, you have to read the following cautions:  Y ou have to check whether the location (ceiling or wall) can bear five times the weight of your camera.  Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may [...]

14 15 5. When you install the Mount bracket on the ceiling, remove the Ceiling mount opener by pressing it hard to connect the line attached on your camera through the hole in the ceiling. Otherwise, you can use the empty space opposite to the CAMERA FRONT sign for line connection. 6. Now attach the Main body to the Mount bracket by rotating it in [...]

14 ENG 15 Appendix A: Specifications for NTSC Standard Item Details Product type CCTV color dome camera Power input AC 24V ± 10% (60Hz ± 0.3 Hz), DC 12V +10%/-5% Broadcast type NTSC Standard System (525 Lines, 60 Fields) Power consumption Approx. 1.7W Image device 1/3 inch IT T ype Super-HAD CCD Pixels T otal : 81 1(H) x 508(V), 410,000 pixels E[...]

16 Appendix B: Specifications for P AL Standar d Item Details Product type CCTV color dome camera Power input AC 24V ± 10% (50Hz ± 0.3 Hz), DC 12V +10%/-5% Broadcast type P AL Standard System (625 Lines, 50 Fields) Power consumption Approx. 1.7W Image device 1/3 inch IT T ype Super-HAD CCD Pixels T otal : 795(H) x 596(V), 470,000 pixels Effectiv[...]

16 AB68-00648C(01)Eng.indd 17 2007-03-19 ¿ÀÀü 10:35:07[...]

AB68-00648C(01)Eng.indd 18 2007-03-19 ¿ÀÀü 10:35:07[...]