Samsung SNB-6010P/EX инструкция обслуживания

NETWORK CAMERA User Manual SNB-6010[...]

Copyright ©201 4 Samsung T echwin Co., Ltd. All rights reserved. T rademark is the r egis tere d log o of Sa msung Tech win C o., Ltd . The n ame of t his pr oduc t is th e regi ster ed tra dema rk of S ams ung Techw in Co., L td. Oth er tr adem ark s ment ione d in thi s manu al are t he regi ster ed tr adem ark of t heir r espe cti ve co mpany. [...]

English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions. 8. Do not i[...]

over view 4_ overview W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be pl[...]

English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the ap[...]

over view 6_ overview Please read the following recommended safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to dir ect sunlight, near heating equipment or heavy cold area. y Do not place this apparatus near conductive material. y Do not attempt to service this appar[...]

English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Featur es 10 Recommended PC Specifications 10 Recommended Micro SD/ SDHC/SDXC Memory Card Specifications 11 NAS recommended specs 11 What’ s Included 13 At a Glance INST ALLA TION & CONNECTION 16 16 Installation 19 Inserting/Removing a Micro SD Memory Card 2[...]

over view 8_ overview SETUP SCREEN 52 52 Setup 52 Basic Setup 63 Video Setup 75 Network Setup 84 Event Setup 89 NAS (Network Attached Storage) guide 106 System Setup 112 Viewing pr ofile information APPENDIX 113 113 Specification 118 Product Overview 120 T roubleshooting 122 Open Source Announcement WEB VIEWER 37 37 Connecting to the Camera 39 Pass[...]

English _9 ● OVERVIEW PRODUCT FEA TURES • Full HD Video Quality • Multi-Str eaming This network camera can display videos in differ ent resolutions and qualities simultaneously using differ ent CODECs. • W eb Browser -based Monitoring Using the Internet web browser to display the image in a local network environment. • Alarm When an event[...]

over view 10_ overview RECOMMENDED PC SPECIFICA TIONS • CPU : Intel Core 2 Duo 2.4 GHz or higher (for using 1920x1080 30 fps) ` Web Plug-in is optimized to SSE 4.1 Instruction Set. • Resolution : 1280X1024 pixels or higher (32 bit color) • RAM : 2GB or higher • Supported OS : Windows XP / VIST A / 7 / 8 / 8.1, MAC OS X 10.7 • Supported Br[...]

English _11 ● OVERVIEW NAS RECOMMENDED SPECS • Recommended capacity : 200GB or higher is r ecommended. • Simultaneous access : One unit of NAS can accept a maximum of sixteen camera accesses. • For this camera, you ar e recommended to use a NAS with the following manufactur er’ s specs. Recommended products Available sizes Netgear NAS A m[...]

over view 12_ overview Appearance Item Name Quantity Description Warranty card (Optional) 1 Camera header installation bracket 1 Used to fix the camera header on the ceiling/wall. Main unit installation bracket 1 Used to install the main unit on the wall/ ceiling. Power terminal block 1 Used by inserting it into the power terminal. Alarm terminal b[...]

English _13 ● OVERVIEW A T A GLANCE Front of the main unit Item Description a Camera unit connection terminal Using the RJ-12 cable, the terminal connects to the camera unit. b Micro SD Memory Card Compartment Compartment for the Micro SD memory card. CAM micro SD a b[...]

over view 14_ overview Rear of the main unit Item Description a Power supply terminal Terminal used to connect to the DC12V power adaptor. b Network connection terminal Terminal used to connect to PoE or LAN via the RJ-45 cable. c In/out terminal GND Ground terminal. ALARM OUT Terminal to connect the alarm output signal. ALARM IN Terminal to connec[...]

English _15 ● OVERVIEW Exterior of the camera unit Item Description a Camera header Camera header used to record an image. b RJ-12 Jack Connect the main unit to the camera unit. a b[...]

16_ installation & connection installation & connection INST ALLA TION Precautions befor e installation Ensure you read out the following instructions before installing the camera: • Select an installation site that can hold at least 5 times the camera’ s weight. • Stuck-in or peeled-of f cables can cause damage to the product or a fi[...]

English _17 ● INST ALLA TION & CONNECTION Installing the camera unit 1. Using the two screws pr ovided or removing the double sided tape protector below the camera header bracket, install the header bracket. 2. Make sure that [ TOP ] shown in the lens head is faced upward, and then push the bracket in. 3. Considering the direction of monitori[...]

installation & connection 18_ installation & connection Installing the camera unit in the main unit Connect the [ CAM ] terminal in the front of the main unit to the camera unit cable. CAM micro SD[...]

English _19 ● INST ALLA TION & CONNECTION INSERTING/REMOVING A MICRO SD MEMOR Y CARD J ` Disconnect the power cable from the camera before inserting the Micro SD memory card. ` Do not insert the Micro SD memory card while it’ s upside down by force. Otherwise, it may damage the Micro SD memory card. Inserting a Micro SD Memory Car d Push th[...]

installation & connection 20_ installation & connection J ` Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released. ` Before removing your Micro SD memory card, turn off the camera or go to < Storage >, turn the device off, and press the [ Apply ( ) ] button. (Page 85 )[...]

English _21 ● INST ALLA TION & CONNECTION CONNECTING WITH OTHER DEVICE Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. J ` If both PoE and DC12V are applied simultaneously , t[...]

installation & connection 22_ installation & connection Power Cable Specification In case of DC 12V Input: Wire Type (AWG) #22 #20 #18 Cable Length (Max.) 24m 38m 60m Network Cable Specification Item Contents Remark Connector RJ45 Ethernet 10/100Base-T 10/100 Mbps Cable UTP Category 5e Max Distance 100M PoE Support IEEE 802.3af T o connect [...]

English _23 ● INST ALLA TION & CONNECTION T o connect the alarm out If devices (e.g., flashing light and siren) that exceed the voltage and current specifications are connected by using the open collector method, it may cause malfunction. Refer to the alarm out connection diagram below when connecting devices that exceed the voltage and curre[...]

24_ network connection and setup network connection and setup Y ou can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTL Y TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the addr ess[...]

English _25 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTL Y TO A DHCP BASED DSL/CABLE MODEM 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect t[...]

26_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTL Y TO A PPPoE MODEM 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect[...]

English _27 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband[...]

28_ network connection and setup network connection and setup BUTTONS USED IN IP INST ALLER Item Description a Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not currently implemented. c Mode Displays either < [...]

English _29 ● NETWORK CONNECTION AND SETUP Item Description g URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed. h IPv4 Scans for cameras with the IPv4 setting. i IPv6 Scans for cameras with the IPv6 setting. Activated in an I[...]

30_ network connection and setup network connection and setup 3. In the < Address > pane, pr ovide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requir es no user setting. M ` IP related parameters can be set only when DHCP is not checked. If not using a Br[...]

English _31 ● NETWORK CONNECTION AND SETUP If using a Broadband Router • IP Addr ess : Enter an address falling in the IP range provided by the Br oadband Router . ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The < Subnet Mask > of the Broadband Router will be the < Subnet Mask > of the camera. • Gatew[...]

32_ network connection and setup network connection and setup Auto Network Setup Run < IP Installer_v2.XX.exe > to display the camera search list. At the initial startup, both [ Auto Set ] and [ Manual Set ] will be grayed out. M ` For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this fun[...]

English _33 ● NETWORK CONNECTION AND SETUP DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP envir onment - If a Broadband Router , with cameras connected, is assigned an IP addr ess by the DHCP server - If connecting the camera directly to modem using the DHCP pr otocols - If IPs are assigned by the internal DHCP server[...]

34_ network connection and setup network connection and setup PORT RANGE FOR W ARD (POR T MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1. From the Setup men u of the Broadba[...]

English _35 ● NETWORK CONNECTION AND SETUP Setting up Port Range Forward for several network cameras • Yo u can set a rule of Port Forwarding on the Broadband Router device through its configuration web page. • A user can change each port using the camera setting scr een. When Camera1 and Camera2 are connected to a router : M ` Port forwardin[...]

36_ network connection and setup network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer . It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M ` Access to the camera can also be gained by typing the c[...]

English _37 ● WEB VIEWER web viewer CONNECTING TO THE CAMERA Normally , you would 1. Launch the Internet browser . 2. T ype the IP addr ess of the camera in the address bar . ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear . • IP address (IPv6) : 2001:230:abcd: ff ff:0000:0000:ff ff:1111  h[...]

38_ web viewer web viewer Connecting via UPnP 1. Run the client or operating system in support of the UPnP protocol. 2. Click the camera name for search. In the Windows operating system, click the camera name searched fr om the network menu. - The login window is displayed. Connecting via Bonjour 1. Run the client or operating system in support of [...]

English _39 ● WEB VIEWER P ASSWORD SETTING When you access the product for the first time, you must register the login password. When the “ Password change ” window appears, enter the new password. J ` For a new password with 8 to 9 digits, you must use at least 3 of the following: uppercase/lowercase letters, numbers and special characters. [...]

40_ web viewer web viewer INST ALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1. When the monitoring page is accessed for the very first time, the installation page is display[...]

English _41 ● WEB VIEWER 5. Click [ OK ]. The old version of Web Viewer Plug-in is deleted. 6. Click [ Install ] to begin installation of the Web Viewer Plug-in. 7. Click [ Finish ]. STW Web Viewer Plug-in installation is completed. J ` In your internet explorer , if you need to move to the installation screen after installing the STW webviewer p[...]

42_ web viewer web viewer USING THE LIVE SCREEN Item Description a Monitoring Move to the monitoring screen. b Playback Move to the screen where you can search for the video recording saved in your Micro SD memory card or NAS. c Setup Move to the Setup screen. d Profile access information You can read the profile information. e Viewer Screen Displa[...]

English _43 ● WEB VIEWER Item Description h Fix the resolution Regardless of the resolution setup configured in the camera, it sets the resolution to 640x480. Press it again to switch back to the default resolution. i Full Screen Switch the current video to the maximum size of the monitor. j Capture Saves the snapshot as an image file in the .jpg[...]

44_ web viewer web viewer T o capture the snapshot 1. Click [ Capture ( ) ] on the scene to capture. 2. When a captured video is saved, a notification message appears. When using Internet Explorer , the captured video is saved in My Computer / My Documents / Pictures. In Mac OS, it is saved in “~/Pictures” or “/Users/{user account}/Pictur es/[...]

English _45 ● WEB VIEWER PLA YING THE RECORDED VIDEO M ` Before you can play the video, you must configure the record settings. For details on record settings, refer to “ Storage ”. (page 85) Name of event search scr een and its function Item Description a Search range setting Set the search date and time range for data saved in your Micro SD[...]

46_ web viewer web viewer T o play the content after searching by event 1. Click the [ Playback ( ) ] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [ Event search ] button. The search r esults will be displayed in the list. M ` If more than 800 events[...]

English _47 ● WEB VIEWER Name of time search scr een and its function Item Description a Time bar The section in the specific period is played by moving the time bar. b Search date setting Set the search date using the calendar. ` If there is data saved in your Micro SD memory card or NAS on the day , it is marked as a box on the calendar . c Scr[...]

48_ web viewer web viewer Item Description g Video information Time data of the replayed video is displayed on the screen. h Backup Set the desired date to make a backup copy of video data saved in your Micro SD memory card or NAS. ` Can be set as up to 5 minutes. T o play after searching by time 1. Click [ Time Search ( ) ]. 2. Click a desired dat[...]

English _49 ● WEB VIEWER 6. Move [ Time bar ( ) ] to a desired time point of the video befor e playing it. The time containing a normal recoding file will be highlighted in blue; the time with the event recor ding will be highlighted in red. T o back up the searched video 1. During playback, click [ ] on the scene to back up. The scheduling windo[...]

50_ web viewer web viewer T o Play an A VI File (1) Micro SD memory car d 1. Separate the Micro SD memory car d from the camera. J ` Before separating the Micro SD memory card, set the < Device > to < Off > in the “ Setup  Event  Storage ” menu. 2. Insert the Micro SD memory car d into the PC. 3. Play the A VI file in the “ [...]

English _51 ● WEB VIEWER (2) NAS (Network-Attached Storage) 1. In Windows browser , use <ip address> to access. ex)192.168.20.31defaultfolderch01 img2013_07_02A VI 2. Go to < Computer >  < Network drive connection >  Enter 1. 3. Connected to the NAS. The directory structur e is same as the directory structur e fo[...]

52_ setup screen SETUP On the network, you can set up basic information on the camera, video, network, events and system. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. J ` The setting page for preview video requires the STW web viewer plug-in to be installed on the PC. If it is not intalled properly , the installation pa[...]

English _53 ● SETUP SCREEN 4. Select each profile pr operties. For more details, r efer to “ T o Add/Change the Video Profile ”. (Page 55) 5. Click the input box of each item and enter / select a desired value. ` The context menu may differ depending on the selected codec type. • Default pr ofile : If no profile is selected when using the W[...]

setup screen 54_ setup screen • A TC sensitivity : Affect the transfer rate accor ding to the variance in the network bandwidth. The transfer rate will be adjusted to the fastest if the bandwidth is < V ery high >, and adjusted to the latest if the bandwidth is < V ery low >. • A TC limit : If the quality or frame rate is adjusted, [...]

English _55 ● SETUP SCREEN T o Add/Change the Video Profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions. 1. Select one from the < Video profile > options. 2. Provide the name and select a codec. 3. Specify the conditions under which the codec will be applied. 4. Specify th[...]

setup screen 56_ setup screen • Encoding priority : Y ou can set the priority of video transmission to frame rate or compression. • GOV length : It specifies the distance (in terms of number of frames) between two consecutive I-Frames in a video sequence when H.264 codec was selected. (One I-Frame + 0~Several P-Frames) • Pr ofile : Y ou can s[...]

English _57 ● SETUP SCREEN T o Use Cr op Encoding 1. Select < Use >. 2. Click < Set area >. The Crop Encoding Ar ea Setup window will pop up. 3. Select < Ratio >. • Ratio: It sets up the aspect ratio of the user specified area. - 16:9 : The aspect ratio shall be set to 16:9 as close as to the user specified area. The supportin[...]

User 1. From the Setup menu, select the < Basic ( ) > tab. 2. Click < User >. 3. Provide the necessary user information. • Administrator passwor d change : Change the password for the administrator . J ` For the security purposes, you are recommended to use a combination of numbers, alphabets uppercase and lowercase and special charac[...]

- If the existing password is not matched, when you change the admin password, you cannot change the password. - After changing your password, if there is a camera connected to a CMS or NVR client, then you need to re-register it with the newly changed password. If the camera is still connected with the same password, then the account may be locked[...]

Date & Time 1. From the Setup menu, select the < Basic ( ) > tab. 2. Click < Date & Time >. 3. Specify the time and date that will be applied to the camera. • Curr ent system time : Displays the current time settings of your system. • Timezone : Specify the local time zone based on the GM T. • System time setup : Specify t[...]

IP & Port 1. From the Setup menu, select the < Basic ( ) > tab. 2. Click < IP & Port >. 3. Set the < IPv4 setup >. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway , DNS1, and DNS2. - DHCP : Specify the DNS1 and DNS2. - PPPoE : Specify the DNS1, DNS2, ID and Password. ` If[...]

5. T ype in each item in the Port menu as necessary . ` Neither the port range between 0 and 1023 nor port 3702 is available. • HTTP : HTTP port used to access the camera via the web br owser . The default is 80(TCP). ` Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security policy . • HTTPS : In this ver[...]

English _63 ● SETUP SCREEN VIDEO SETUP Video setup 1. From the Setup menu, select the < Video ( ) > tab. 2. Click < Video setup >. 3. Select a < Video source > mode. • Flip mode : T urn upside down the image that is captured by the camera. • Mirr or mode : Flip horizontal the image that is captured by the camera. 4. Specify [...]

setup screen 64_ setup screen Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the < Video ( ) > tab. 2. Click < Camera setup >. 3. Configure the settings as necessary of : Image preset, Sensor , SSDR, White balance, Back light, Exposure, Day/ Night,[...]

English _65 ● SETUP SCREEN • Reduced noise : Select this when you need a video with low noise in the low illumination environment. • Bright video : This makes the dark ar ea in a full video brighter . J ` Video contracts effects are reduced. • Motion focus&Reduced noise : Use this when ther e are many moving objects, such as on a road o[...]

setup screen 66_ setup screen Initial setting for each image preset mode Image preset Minimum shutter Maximum shutter AGC SSDR SSNR3 Definition focus (Default) When you change the profile Default (1/5) 1/12000 Default (High) Default (12) Default (12) Motion focus 1/30 1/12000 Default (High) Default (12) 4 Reduced noise 1/15 1/12000 Middle Default ([...]

English _67 ● SETUP SCREEN T o Set the Sensor It specifies how many frames the camera CMOS sensor will capture per second. 1. Select < Sensor >. 2. Select < Mode >. M ` Refer to “ Video profile ” for the framerate setup range of the < Video profile > according to mode setup. (Page 52 ) T o Set SSDR (Samsung Super Dynamic Ran[...]

setup screen 68_ setup screen T o Set White Balance You can correct the image colors based on white under any lighting conditions. 1. Select < White balance >. 2. Select < Mode >. • A TW : Corrects the colors of the camera video automatically . • Manual : Y ou can adjust the r ed and blue gains of the camera video manually . • AWC[...]

English _69 ● SETUP SCREEN T o Set BLC You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select < Back light >. 2. Set < Mode > to < BLC >. 3. Set < BLC level >. Y ou can change the level to adjust the brightness of the monitoring area. 4. Set the < T op, Bottom, Left[...]

setup screen 70_ setup screen T o Set Exposur e You can adjust the exposure level of the camera. 1. Select < Exposure >. 2. Select each item and set it properly . • Brightness : Adjust the scr een brightness. • Minimum shutter : The limit of the longest exposure time. ` Shutter is the mode to set up the range of the sensor exposure time w[...]

English _71 ● SETUP SCREEN T o Set Day/Night 1. Select < Day/Night >. 2. Select each item and set it properly . • Mode: Mode is used to adjust the color of Color or Black and White. - Color : The video is always output in color. - B/W : The video is always output in black and white. - Auto : Normally, it is set to Color but to B&W und[...]

setup screen 72_ setup screen T o Setup Special 1. Select < Special >. 2. Select each item and set it properly . • DIS : Compensates the image automatically when it is seen to shake for stable image output. • Sharpness mode : Adjust the overall sharpness of the image. If selecting < On >, you can adjust the sharpness of the image. ?[...]

English _73 ● SETUP SCREEN T o Set OSD 1. Select < OSD >. 2. Select each item and set it properly . • Camera title : It specifies the name of the camera to be displayed on the screen. • Camera title X, Y : It specifies the position of the camera name on the screen. • Date & time : Set the time display and date formats on the scr e[...]

setup screen 74_ setup screen Smart codec Set a desired area of the video incoming from the camera as ROI area and specify the detection sensitivity for the area. 1. From the Setup menu, select the < Video ( ) > tab. 2. Click < Smart codec >. 3. Select ROI Area. • Face detection : Active if a face is recognized on the monitoring scr e[...]

NETWORK SETUP DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. J ` Y ou can use the DDNS service only if the internet is connected. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < DDNS >. 3. Select the[...]

Registering with DDNS T o r egister your product with the Samsung DDNS 1. Visit the iPOLiS web site (www .samsungipolis.com) and sign in with a register ed account. 2. From the top menu bar , select < DDNS SERVICE > - < MY DDNS >. 3. Click [ PRODUCT REGISTRA TION ]. 4. Enter the product ID. ` Y ou must perform the duplicate check for th[...]

T o connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set < DDNS > to < Samsung DDNS >. 2. Provide the < Pr oduct ID > that you register ed product ID with the DDNS site. 3. Click [ Apply ( ) ]. When the connection is successfully made, you will see the message of < (Success) > on the screen. Configuri[...]

IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < IP filtering >. 3. Select < Filtering type >. • Deny : If selecting this, access fr om those IPs that are added to the filtering will be restricted. • Allow : If selecting [...]

SSL You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < SSL >. 3. Select a secure connection system. ` T o access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP[...]

802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < 802.1x >. 3. Set the < IEEE 802.1x setting >. • IEEE 802.1x : Specify the use of the 802.1x protocol. • EAP type : Select EAP-TLS or LEAP . • EAP[...]

QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < QoS >. 3. Click the [ Add ( ) ] button. The IP list will be created. 4. Enter an IP address to which you will apply QoS. M ` The default prefix for IPv4 is 32; For DSCP , the default is [...]

• Enable SNMP T rap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generated when the community information is invalid. - [...]

Auto IP configure You can set the IP available for access and camera searching automatically. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Auto IP configure >. 3. Set the < Link-Local IPv4 address >. An additional IP address may be assigned to assess the camera from the Link-Local network. • Auto configur e[...]

EVENT SETUP FTP / E-mail You can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC if an event occurs. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < FTP / E-mail >. 3. Select < FTP configuration > or < E-mail configuration > and enter / select a desir[...]

• E-mail configuration - Server address : Enter the IP addr ess of the e-mail server to send an event image. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server . - Password : Enter the user account passwor d for logging into the email server . [...]

T o make r ecording on the Micr o SD memory 1. Check the memory card’ s < Free size > and < T otal size >. 2. If there ar e sufficient free space, set the device to < On >. Otherwise, check the stored data and if you find them not important, then click < Format > to format the Micro SD memory . ` Some frames may be skipped[...]

4. Specify the < Normal recor d setup >. • Always : Always save r ecorded video in the Micr o SD memory card. ` If set to Always, the activation time cannot be changed. • Only scheduled time : Records only on the specified time of the specified day of week. • [Clear ( )] : Reset all settings. 5. When done, click [ Apply ( ) ]. If you wa[...]

- Confirm that the NAS IP address and the camera IP address are in the same format. ex) The NAS & camera subnet mask initial value is 255.255.255.0. If the IP address is 192.168.20.32 then the NAS IP address should be in the range of 192.168.20.1~192.168.20.255. - Check whether you tried to access as another user without formatting the default [...]

NAS (Network Attached Storage) guide J ` Since data may not be saved after a temporary network interruption when using NAS, it is recommended that you use SD at the same time to prevent loss of recorded images. ` If the setting allows a Micro SD memory card and the NAS to be simultaneously connected for use, the higher priority for recording goes t[...]

2. If you access it as an admin, the following screen will be displayed. Click the [ Control Panel ]. 3. Click the < Shared Folder > in the file sharing and privilege menu. 4. Click the [ Create ] button. 5. After entering the shared folder name(ID), click the [ OK ] button to create a shar ed folder . In this example, the shared folder name [...]

8. After clicking the [ Create ] button, enter name(ID) and password. In this example, name(ID) is set to [ testID ] and password is also set to [ testID ]. J ` According to the NAS recommendations, when you use Netgear’ s NAS equipment, do not allocate the capacity for use. 9. In Windows, set the privilege for NAS access. For the shared folder c[...]

Alarm output 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Alarm output >. 3. Set the camera’ s type of alarm output. ` If you change the alarm output type, the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly . • T ype - Normal open : Consider[...]

Alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Alarm input >. 3. Set whether or not to < Enable >. 4. Select the type. • Normal open : It is normally open, but if it is closed, an alarm will be triggered. • Normal close : It is[...]

6. Specify an operation that will perform if an alarm occurs. • FTP : Specify the use of FTP transfer in the alarm input setup. ` Refer to “ FTP / E-mail ” for more details. (page 84) • E-mail : Specify the use of email transfer in the alarm input setup. ` Refer to “ FTP / E-mail ” for more details. (page 84) • Recor d : Specify the u[...]

Time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Time schedule >. 3. Set whether or not to < Enable >. 4. Specify the < T ransfer interval >. 5. Specify the < Activation tim[...]

T ampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < T ampering detection >. 3. Set whether or not to < Enable >. 4. Se[...]

MD / V A Events of motion detection and video analysis can be set to trigger event signal output. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < MD / V A >. 3. Set whether or not to < Enable >. 4. According to your purpose, select fr om motion detection and intelligent video analysis. 5. Set < Sensitivity >[...]

J ` Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. ` Detected size of an object may have difference with the actual size according to its shape. ` Up to 16 objects from the top side of the screen can be displayed. ` If camera is capturing a close object, the video analysis capability may degrade.[...]

T o use Motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select a motion detection mode. 2. Select < Sensitivity > tab to set the sensitivity level. Y ou can set the sensor’ s sensitivity to detect a motion out of the background fr om the monitoring video. J ` In a situation that def[...]

4. Select < Area > tab. Y ou can specify an area on the scr een to include or exclude the area to/fr om detection. Y ou can specify up to 4 areas. • Detection ar ea : Sets the entire screen as excluded fr om detection, and adds specified area as motion detection area. Select 4 vertices in the image with your mouse to specify the detection a[...]

T o use Video analytics It detects event that meets all conditions specified by sensitivity, size and area and the event condition rules. 1. Select the video analysis mode. 2. Set < Sensitivity >, < Size > and < Area >. For further details on settings, refer to “ T o use Motion detection ”. (Page 99~100) 3. Select < Analyti[...]

T o set the video analysis rules ` Passing 1. Set the type to < Passing >. 2. On the screen, click on pr eferred starting and ending point of the virtual line, then a popup window appears. 3. Select the desired rule: • Right: Detects motions of moving from the left to the right, over the virtual line. • Left: Detects motions of moving fr [...]

` Appearing (Disappearing) 1. Set the analysis type to < Appearing (Disappearing) >. 2. Select the desired event rule: • Defined ar ea based rules : It detects event of appearing object that appears in the area and r emaining for a certain time period while not passing through the ar ea borders, and opposite case of disappearing of objects [...]

Face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Face detection >. 3. Set whether or not to < Enable >. 4. Select < Sensitivity > tab to set the sensitivity level. ` As the sensitivity grows, face detection becomes more clo[...]

Network disconnection When the network is physically disconnected, it is considered as an event to be saved. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Network disconnection >. 3. Set whether or not to < Enable > . 4. Specify the activation time and activation condition. ` For more information about < Acti[...]

SYSTEM SETUP Product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Product information >. 3. Check the camera information, or provide details accor ding to your network environment. • Model : Model name of the pr oduct. • Serial number : Pr oduct serial number . • Device name : Pr ovide a device nam[...]

Upgrade / Reboot 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Upgrade / Reboot >. 3. Select a desired item and set it appropriately . • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default. - Except network parameter & Open SDK : Initialize all except for the [...]

T o perform the upgrade 1. Click [ Upgrade ]. 2. Click [ Browse ] and specify a file to upgrade. 3. Click [ Send ]. 4. The “ Upgrade ” dialog appears where the progr ession will be shown in the bottom. 5. Once completed upgrading, the browser exits and the camera r estarts. M ` It may take a max of 10 minutes for the upgrade process. If you for[...]

T o back up the curr ent settings 1. Click [ Backup ]. The Save As dialog should appear . 2. Specify the backup path with a proper file name, and click [ Save ]. The backup file will be saved to the specified path in the format of “ .bin ”. T o r estore the backup settings 1. T o r estore the backup settings, click [ Restore ]. 2. Select a back[...]

Log You can check the system log or event log. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Log >. 3. Select a log type. • System : Y ou can check the system logs where any system changes are r ecorded including the time information. • Event : Y ou can check the event logs including the time information. 4. From[...]

Open SDK A user can install an application on their camera to execute additional functions. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Open SDK >. 3. Click the [ Browse ( ) ] button to select the *.cap file from the user folder . 4. Click the [ Install ( ) ] button to install your application. 5. The information o[...]

VIEWING PROFILE INFORMA TION Profile access You can check the profile information. 1. Click [ Status ( ) ] on the live screen. 2. The profile information scr een is displayed. • Pr ofile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec. - Bitrate(kbps) : Show both the actual bit r[...]

English _113 ● APPENDIX appendix SPECIFICA TION Items Description Video Imaging Device 1/2.8” PS 2.83M CMOS Total Pixels 1952(H) x 1116(V) Effective Pixels 1944(H) x 1104(V) Scanning System Progressive Min. Illumination Color : 0.5 Lux (1/30sec, F2.5, 50IRE ) S / N Ratio - Lens Focal Length (Zoom Ratio) 4.6mm pinhole Max. Aperture Ratio 2.5 Ang[...]

appendix 114_ appendix Items Description Operational Digital Noise Reduction SSNRIII (2D+3D Noise Filter) (Off / On) Digital Image Stabilization Off / On Defog Off / Auto / Manual Motion Detection Off / On (4ea 4 Points Polygonal zones) Privacy Masking Off / On (32 Zones with 4 Points of Polygonal ) Gain Control Off / Low / Middle / High White Bala[...]

English _115 ● APPENDIX Items Description Network Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264(MPEG-4 Part 10/AVC), Motion JPEG Resolution 1920x1080 / 1280x1024 /1280x960 / 1280x720 / 1024x768 / 800x600 / 800x450 / 640x480 / 640x360 / 320x240 / 320x180 Max. Framerate H.264 : Max 30fps at all resolutions MJPEG : 1920x1080 / 1280x10[...]

appendix 116_ appendix Items Description Network Security HTTPS(SSL) Login Authentication Digest Login Authentication IP Address Filtering User access Log 802.1x Authentication Streaming Method Unicast / Multicast Max. User Access 15 users at Unicast Mode Memory Slot Micro SD/SDHC/SDXC - Recorded data in the SD/SDHC/SDXC memory card can be download[...]

English _117 ● APPENDIX Items Description Environmental Operating Temperature / Humidity -10°C ~ +55°C (+14°F ~ +131°F) / Less than 90% RH Storage Temperature / Humidity -30°C ~ +60°C (-22°F ~ +140°F) / Less than 90% RH Electrical Input Voltage / Current DC12V, PoE(IEEE802.3af) Power Consumption PoE : 7.5W , DC12V : 6.5W Mechanical Color [...]

appendix 118_ appendix PRODUCT OVERVIEW Camera Unit Unit : mm (inch) Ø 4.5 (0.18") 30° 25° 45° 25° Ø 65 (2.56") Ø 52 (2.05") 44 (1.73”)[...]

English _119 ● APPENDIX Main Unit Unit : mm (inch) Ø 5 (0.20") 40 (1.57") 55.4 (2.18") 65.8 (2.59") 121.2 (4.77") 76 (2.99") 28 (1.10")[...]

appendix 120_ appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses withou[...]

English _121 ● APPENDIX PROBLEM SOLUTION Can I define event rules even when I don’t use <MD / VA>? y Yes, it can be. You can set rules for events despite of the intelligent video analysis setting. Cannot record into the Micro SD memory card. y Check if the memory card is defective. Micro SD memory card is inserted but the camera does not [...]

OPEN SOURCE ANNOUNCEMENT GPL/LGPL software license The software included in this product contains copyrighted softwar e that is licensed under the GPL/LGPL. Y ou may obtain the complete Corresponding Source code fr om us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obta[...]

GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C)1989, 1991 Free Software Foundation, Inc. 51 Franklin Street,Fifth Floor , Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away y[...]

3. Y ou may copy and distribute the Program (or a work based on it, under Section 2)in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following : a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 a[...]

NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW . EXCEPT WHEN OTHERWISE ST A TED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER P ARTIES PROVIDE THE PROGRAM “ASIS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED T[...]

Finally , every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose omputers, but in those that do, we wish to avoid the special anger that patents applied to a free program could make it ffectively proprietary . T o prevent this, the GPL assures that a[...]

5. Conveying Modified Source V ersions. Y ou may convey a work based on the Program, or the modifications to produce it from the Pr ogram, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b)[...]

7. Additional T erms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be tr eated as though they were included in this License, to the extent that they are valid under applicable law . If a[...]

In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). T o “grant” such a patent license to a party means to make such an agreement or commitment not to enfo[...]

OpenSSL Combined License The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core[...]

BSD License Some software components of this product incorporate sour ce code covered under the BSD license as follows. Component Name License URL net-snmp-5.7.1 pcre-8.20 openssh-5.9p1 libcap-1.2.1 lighttpd-1.4.35 Game-ws MiniUPnP Project Client pppd-2.4.5 BSD BSD BSD BSD 2.0 BSD 2.0 BSD 2.0 BSD 2.0 BSD 2.0 http://www .net-snmp.org/about/license.h[...]

3. Neither the name of the Regents of the University of California nor the names of its contributors may be used to endorse or promote products derived fr om this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT N[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTA[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTA[...]

The MIT License Some software components of this product incorporate sour ce code covered under the MIT license as follows MIT License 2.0 - Acewidget, bettermeans, jquery-ui, libxml, libxml2, Mesa3D-MesaLib,mwEmbed,OpenGL Samples Pack, Wide Studio, xorg-server , dropbear-2012.55, ncurses-5.7 Copyright (c) 2011, The Dojo Foundation Copyright 2010, [...]

1.11. “Source Code” means the preferr ed form of the Covered Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differ ential comparisons against either the Original Code or another well know[...]

3.5. Required Notices. Y ou must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then Y ou must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If Y ou created on[...]

8.3. If Y ou assert a patent infringement claim against Participant alleging that such Participant’ s Contributor Version dir ectly or indirectly infringes any patent where such claim is r esolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such[...]

The Independent JPEG Group’ s JPEG Software The software included in this product contains copyrighted softwar e that is licensed under the JPEG license. • JPEG license - Code project . Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Independent JPEG Group’ s free JPEG software. Y ou are welcome t[...]

T -Kernel License - This Product uses the Source Code of T -Kernel under T -License granted by the T -Engine Forum(www .t-engine.org) T -License [License Agreement for Source Code of T -Kernel] established by T -Engine Forum on January 23, 2004 revised on June 17, 2004 revised on December 21, 2006 revised on March 24, 2009 Article 1. Scope of Licen[...]

Article 4. License of Source Code 1. As provided for in this Article, T -Engine Forum shall provide, and grant a license to use, the Source Code fr ee of charge to any person who has taken the necessary procedure for r egistration as prescribed by T -Engine Forum and agreed to the T -License. 2. The Source Code shall be distributed exclusively by T[...]

distribute the Ported Source Code as the Source Code for T -Kernel. Provided, however , that the Ported Source Code may be treated in the same way as the Modified Source Code until the time of registration hereunder . 5. The provision set forth in Article 3 shall apply to the Ported Source Code register ed in accordance with this Article. Article 7[...]

any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code control systems, and issue tracking systems that are managed by , or on behalf of, the Licensor for the purpose of discussing and improving the Work, but excluding [...]

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer . 2. The origin of this software must not be misrepr esented; you must not claim[...]

PHP 3.01 License The PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved. Component Name License URL php-5.2.17 PHP 3.01 http://www.php.net/distributions Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met: 1. Redistributions [...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has[...]

MEMO[...]

SALES NETWORK SAMSUNG TECHWIN CO ., L TD. 6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, SEOUL 463-400 Rep. of KOREA T el : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740 www.samsungsecurity .com SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 T oll Free : +1-877-213-1222 Direct : +1-201-325-6920 [...]