Samsung SNF-7010 инструкция обслуживания

NETWORK CAMERA User Manual SNF-7010/SNF-7010V[...]

Copyright ©2013 Samsung T echwin Co., Ltd. All rights reserved. T rademark is the r egis tere d log o of Sa msung Tech win C o., Ltd . The n ame of t his pr oduc t is th e regi ster ed tra dema rk of S ams ung Techw in Co., L td. Oth er tr adem ark s ment ione d in thi s manu al are t he regi ster ed tr adem ark of t heir r espe cti ve co mpany. R[...]

English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions. 8. Do not i[...]

over view 4_ overview W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be pl[...]

English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the ap[...]

over view 6_ overview Please read the following recommended safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to dir ect sunlight, near heating equipment or heavy cold area. y Do not place this apparatus near conductive material. y Do not attempt to service this appar[...]

English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Featur es 10 Recommended PC Specifications 10 Recommended Micro SD/SDHC/ SDXC Memory Card Specifications 11 What’ s Included 13 At a Glance INST ALLA TION & CONNECTION 16 16 Installation 19 Inserting/Removing a Micro SD Memory Card 20 Memory Card Information[...]

over view 8_ overview SETUP SCREEN 54 54 Setup 54 Video & Audio Setup 67 Network Setup 78 Event Setup 88 System Setup APPENDIX 95 95 Specification 100 Product Overview 102 T roubleshooting 104 Open Source Announcement WEB VIEWER 37 37 Connecting to the Camera 39 Login 40 Installing Silverlight Runtime 43 Installing STW W ebViewer Plugin 45 Usin[...]

English _9 ● OVERVIEW PRODUCT FEA TURES • Fisheye lens This lens has 180˚ vision and it can recor d video panoramically . If you use Smart Viewer on your PC, you can view corrected video in r eal time. • Dustpr oof/Waterpr oof (IP66) (SNF-7010V) The dustproof and waterpr oof design makes you feel at ease when installing the product outdoors [...]

over view 10_ overview RECOMMENDED PC SPECIFICA TIONS • CPU : Intel Core 2 Duo 2.4 GHz or higher Intel Core i7 2.8 GHz or higher ` Web Plug-in is optimized to SSE 4.1 Instruction Set. • Resolution : 2048X1536 pixels or higher (32 bit color) • RAM : 2GB or higher • Supported OS : Windows XP / VIST A / 7 / 8, MAC OS X 10.8, 10.7 • Supported[...]

English _11 ● OVERVIEW WHA T’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name Camera 1 SNF-7010 or SNF-7010V 1 Instruction book, Installer S/W CD, CMS S/W DVD 2 SNF-7010/ SNF-7010V Quick Guide (Optional) 1 SNF-7010/ SNF-7010V Warranty card (Optio[...]

over view 12_ overview Appearance Item Name Quantity Description Model Name 132 128 (절단선) Template 1 Product installation guide SNF-7010/ SNF-7010V Tapping Screw 3 Used for installation on the wall or ceiling SNF-7010/ SNF-7010V Plastic Anchor 3 For fixing a screw, Inserted in a hole (reinforced anchoring force) SNF-7010/ SNF-7010V Machine Sc[...]

English _13 ● OVERVIEW A T A GLANCE Appearance a b c d e f a c d e f[...]

over view 14_ overview Item Description a Cover top SNF-7010 Case cover used to protect the main unit. SNF-7010V Case cover used to protect the lens and the main unit. b Microphone hole A microphone is embedded. ` It is applicable only to the SNF-7010 model. c Power Port Used to plug the power cable. d Network Port Used to connect the PoE or Ethern[...]

English _15 ● OVERVIEW Inside Item Description a Camera fixing hole Hole used for securing the camera onto a ceiling. b MIC The MIC is built into the camera. ` It is applicable only to the SNF-7010 model. c Fisheye lens This lens has 180˚ vision and it can record video panoramically. d Micro SD Memory Card Compartment Compartment for the Micro S[...]

16_ installation & connection installation & connection INST ALLA TION J ` This camera(SNF-7010V) is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed. Precautions befor e[...]

English _17 ● INST ALLA TION & CONNECTION Installing the camera on the ceiling or a wall 1. Select a location where you want to install the camera. 2. Insert the provided scr ew into the camera hole and turn it clockwise. 3. Close the cover top and turn it clockwise using the L-wrench. J ` When you fix the cover , if you do not align it with [...]

installation & connection 18_ installation & connection Outdoor installation (SNF-7010V) When you install the camera outdoors, it should be waterproofed with waterproof butyl rubber tape (which can be purchased in stores) so that water does not leak from the gap of the cable connected in the outdoor area. 1. Connect the power , audio I/O an[...]

English _19 ● INST ALLA TION & CONNECTION INSERTING/REMOVING A MICRO SD MEMOR Y CARD J ` Disconnect the power cable from the camera before inserting the Micro SD memory card. ` Do not insert the Micro SD memory card while it’ s upside down by force. Otherwise, it may damage the Micro SD memor y card. Inserting a Micro SD Memory Car d Push t[...]

installation & connection 20_ installation & connection J ` Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released. ` Before removing your Micro SD memory card, turn off the camera or go to < Storage >, turn the device off, and press the [ Apply ( ) ] button. (Page 79) [...]

English _21 ● INST ALLA TION & CONNECTION CONNECTING WITH OTHER DEVICE Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. J ` If both PoE and DC12V are applied simultaneously , t[...]

installation & connection 22_ installation & connection Power Cable Specification for Each Model In case of DC 12V Input: Wire Type (AWG) #22 #20 #18 Cable Length (Max.) 24m 38m 60m Network Cable Specification Item Contents Remark Connector RJ45 Ethernet 10/100Base-T 10/100 Mbps Cable UTP Category 5e Max Distance 100M PoE Support IEEE 802.3[...]

English _23 ● INST ALLA TION & CONNECTION Connecting to Audio Input/Output 1. Connect the AUDIO IN port of the camera with the microphone or LINE OUT port of the amplifier that the microphone is connected to. M ` As a microphone is built in, you can use the built-in microphone instead of an external one. (It is applicable only to the SNF-7010[...]

24_ network connection and setup network connection and setup Y ou can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTL Y TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the addr ess[...]

English _25 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTL Y TO A DHCP BASED DSL/CABLE MODEM 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect t[...]

26_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTL Y TO A PPPoE MODEM 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to connect[...]

English _27 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband[...]

28_ network connection and setup network connection and setup BUTTONS USED IN IP INST ALLER Item Description a Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not currently implemented. c Mode Displays either < [...]

English _29 ● NETWORK CONNECTION AND SETUP Item Description g URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed. h IPv4 Scans for cameras with the IPv4 setting. i IPv6 Scans for cameras with the IPv6 setting. Activated in an I[...]

30_ network connection and setup network connection and setup 3. In the < Address > pane, pr ovide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requir es no user setting. M ` IP related parameters can be set only when DHCP is not checked. If not using a Br[...]

English _31 ● NETWORK CONNECTION AND SETUP If using a Broadband Router • IP Addr ess : Enter an address falling in the IP range provided by the Br oadband Router . ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The < Subnet Mask > of the Broadband Router will be the < Subnet Mask > of the camera. • Gatew[...]

32_ network connection and setup network connection and setup Auto Network Setup Run < IP Installer_v2.XX.exe > to display the camera search list. At the initial startup, both [ Auto Set ] and [ Manual Set ] will be grayed out. M ` For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this fun[...]

English _33 ● NETWORK CONNECTION AND SETUP DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP envir onment - If a Broadband Router , with cameras connected, is assigned an IP addr ess by the DHCP server - If connecting the camera directly to modem using the DHCP pr otocols - If IPs are assigned by the internal DHCP server[...]

34_ network connection and setup network connection and setup PORT RANGE FOR W ARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1. From the Setup men u of the Broadban[...]

English _35 ● NETWORK CONNECTION AND SETUP Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J ` If you don't set properly the TCP 943 port of the router , you cannot [...]

36_ network connection and setup network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer . It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M ` Access to the camera can also be gained by typing the c[...]

English _37 ● WEB VIEWER web viewer CONNECTING TO THE CAMERA Normally , you would 1. Launch the Internet browser . 2. T ype the IP addr ess of the camera in the address bar . ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear . • IP address (IPv6) : 2001:230:abcd: ff ff:0000:0000:ff ff:1111  h[...]

38_ web viewer web viewer Connecting via UPnP 1. Run the client or operating system in support of the UPnP protocol. 2. Click the camera name for search. In the Windows operating system, click the camera name searched fr om the network menu. - The login window is displayed. Connecting via Bonjour 1. Run the client or operating system in support of [...]

English _39 ● WEB VIEWER LOGIN Whenever you access the camera, the login window appears. Enter the User ID and password to access the camera. 1. Enter “ admin ” in the < User name > input box. The administrator ID, “ admin ”, is fixed and can not be changed. 2. Enter “ 4321 ” in the < Password > input box. If the password [...]

40_ web viewer web viewer INST ALLING SIL VERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. T o install on Windows OS 1. Click < Click Here >. 2. When the file download [...]

English _41 ● WEB VIEWER T o install on MAC OS 1. Run the file trailing with “.dmg”. 2. Run the install package file automatically created, ending with “.pkg”. 3. Click < Continue >. 4. Select your language on the language selection screen, and click < Continue >.[...]

42_ web viewer web viewer 5. Click < Agree >. 6. Click < Install >. 7. Enter the password of the account currently logged in, and click < Install Software > and continue. 8. Once completed, click < Close >.[...]

English _43 ● WEB VIEWER INST ALLING STW WebViewer PLUGIN If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1. When the monitoring page is accessed for the very first time, the installation page is displa[...]

44_ web viewer web viewer 5. Click [ OK ]. The old version of Web Viewer Plug-in is deleted. 6. Click [ Install ] to begin installation of the Web Viewer Plug-in. 7. Click [ Finish ]. STW Web Viewer Plug-in installation is completed.[...]

English _45 ● WEB VIEWER USING THE LIVE SCREEN Item Description a Monitoring Move to the monitoring screen. b Playback Switch to the monitoring screen that plays recording data in the Micro SD memory. c Setup Move to the Setup screen. d Viewer Screen Displays the Live video on the screen. ` Y ou can use the mouse wheel to activate the digital zoo[...]

46_ web viewer web viewer Item Description h Full Screen Switch the current video to the maximum size of the monitor. i Capture Saves the snapshot as an image file in the .bmp or .jpg format. j Audio/Microphone Control Enable Audio and Microphone are control the Audio volume. ` Only the Audio volume can be controlled. k Hide the context menu The le[...]

English _47 ● WEB VIEWER T o fit the full screen 1. Click the [ Full Screen ( ) ] button. 2. This will fit the Viewer to the full screen. 3. T o exit the full scr een mode, press [ Esc ] on the keyboard. M ` For the Internet Explorer and Google Chrome browser , you can switch to the full screen. T o Use Audio 1. Click [ Audio ( ) ] icon to activa[...]

48_ web viewer web viewer PLA YING THE RECORDED VIDEO M ` Before you can play the video, you must configure the record settings. For details on record settings, refer to “ Storage ”. (page 79) Name of event search scr een and its function Item Description a Search range setting Set the search date and time from the data saved in the Micro SD me[...]

English _49 ● WEB VIEWER T o play the content after searching by event 1. Click the [ Playback ( ) ] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4. Click the [ Event search ] button. The search r esults will be displayed in the list. M ` If more than 800 event[...]

50_ web viewer web viewer Name of time search scr een and its function Item Description a Time bar The section in the specific period is played by moving the time bar. b Search date setting Set the search date using the calendar. ` Dates for which there is video in the Micro SD memory card are displayed within the boxes on the calendar . c Speaker [...]

English _51 ● WEB VIEWER Item Description h Video information Time data of the replayed video is displayed on the screen. i Backup Time zone is set to back up the video saved in the Micro SD memory card. ` Can be set as up to 5 minutes. T o play after searching by time 1. Click [ Time Search ( ) ]. 2. Click a desired date in the calendar . The vi[...]

52_ web viewer web viewer T o back up the searched video 1. During playback, click [ ] on the scene to back up. The scheduling window for backup start and end time appears. 2. Click [ ] button. The Save As window appears. 3. Confirm the save path and click [ Save ] button. The screenshot will be backed up to the specified path. T o play the backup [...]

English _53 ● WEB VIEWER T o Play an A VI File M ` If you used the AVI codec to record your video, you can insert a memory card in the PC to check the video. If you used STW codec to record your video you need to go to [ Playback ] and make an AVI backup file, so that you can play the A VI video file. For more on how to set the type of video reco[...]

setup screen SETUP You can configure the video & audio, network, event and system settings of the camera in the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. J ` Microsoft Silverlight 5.0 or higher is required to be installed on the PC for setup pages that provide preview video. If not installed already , au[...]

• E-mail/FTP pr ofile : Video profile to be transferred to the specified email or FTP site. ` Only the MJPEG codec can be set as the E-mail/FTP profile. • Recor d profile : This is the profile that is applied to video r ecording. • Audio-In : Sets whether to use audio for video r ecordings. 6. According to your situation, set A TC (Auto T ran[...]

setup screen T o Add/Change the Video Profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions. 1. Select one from the < Video profile > options. 2. Provide the name and select a codec. 3. Specify the conditions under which the codec will be applied. 4. Specify the details of the[...]

• Multicast(SVNP) : Specify the use of the SVNP pr otocol. - IP address : Enter an IPv4 addr ess with which you can connect to the IPv4 network. - Port : Specify the video communication port. - TTL : Set the TTL for the SVNP packet. • Multicast(RTP) : Specify the use of the RTP protocol. - IP address : Enter an IPv4 addr ess with which you can [...]

setup screen 4. Select the camera location type. In order to pr ovide the user program with location information, the camera installation location is set. • W all : Select this if you’ve installed the camera on the wall. • Ceiling : Select this if you’ve installed the camera on the ceiling. • Gr ound : Select this if you’ve installed th[...]

Audio setup You can configure the I/O settings of the audio source from the camera. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Audio setup >. 3. Set the audio input value. • Sour ce : Sets the audio input. - Line : Connect the cable to the audio device. - Internal microphone : Microphone that is built[...]

setup screen Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the < Video & Audio ( ) > tab. 2. Click < Camera setup >. 3. Configure the settings as necessary of : SSDR, White balance, Back light, Exposure, Day/Night, Special, OSD 4. When done, c[...]

T o Set White Balance You can correct the image colors based on white under any lighting conditions. 1. Select < White balance >. 2. Select < Mode >. • A TW : Corrects the colors of the camera video automatically . • Manual : Y ou can adjust the r ed and blue gains of the camera video manually . • AWC : Corr ects the colors of the[...]

setup screen T o Set BLC You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select < Back light >. 2. Set < Mode > to < BLC >. 3. Set < BLC level >. Y ou can change the level to adjust the brightness of the monitoring area. 4. Set the < T op, Bottom, Left, Right > lev[...]

T o Set Exposur e You can adjust the exposure level of the camera. 1. Select < Exposure >. 2. Select each item and set it properly . • Brightness : Adjust the scr een brightness. • Minimum shutter : The limit of the longest exposure time. ` Shutter is the mode to set up the range of the sensor exposure time which will specify the upper an[...]

setup screen T o Set Day/Night 1. Select < Day/Night >. 2. Select each item and set it properly . • Mode: Mode is used to adjust the color of Color or Black and White. - Color : The video is always output in color. - B/W : The video is always output in black and white. - Auto : Normally, it is set to Color but to B&W under low luminance[...]

T o Setup Special 1. Select < Special >. 2. Select each item and set it properly . • Sharpness mode : Adjust the overall sharpness of the image. If selecting < On >, you can adjust the sharpness of the image. • Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes. • Gamma : Adjust the[...]

setup screen T o Set OSD 1. Select < OSD >. 2. Select each item and set it properly . • Title overlay : It specifies if the camera name shall be displayed on the screen. • Camera title : It specifies the name of the camera to be displayed on the screen. • Title position X, Y : It specifies the position of the camera name on the screen. [...]

NETWORK SETUP Interface 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Interface >. 3. Set the < Interface > and < IPv6 setup > as necessary . • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway , DNS1, and DNS2. - DHCP : IP address, gateway and subnet mask [...]

setup screen Port 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Port >. 3. T ype in each item in the Port menu as necessary . ` When setting your ports, you cannot use port numbers such as 0~1023, 3702 or 49152. • HTTP port : HTTP port used to access the camera via the web browser . The default is 80(TCP). ` Setti[...]

DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < DDNS >. 3. Select the < DDNS > connection type. 4. T ype in the DDNS items accor ding to the selec[...]

setup screen Registering with DDNS T o r egister your product with the Samsung DDNS 1. Visit the iPOLiS web site (www .samsungipolis.com) and sign in with a register ed account. 2. From the top menu bar , select < DDNS SERVICE > - < MY DDNS >. 3. Click [ PRODUCT REGISTRA TION ]. 4. Enter the product ID. ` Y ou must perform the duplicate[...]

T o connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set < DDNS > to < Samsung DDNS >. 2. Provide the < Pr oduct ID > that you register ed product ID with the DDNS site. 3. Click [ Apply ( ) ]. When the connection is successfully made, you will see the message of < (Success) > on the screen. Configuri[...]

setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < IP filtering >. 3. Select < Filtering type >. • Deny : If selecting this, access fr om those IPs that are added to the filtering will be restricted. • Allow : [...]

SSL You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < SSL >. 3. Select a secure connection system. ` T o access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP[...]

setup screen 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < 802.1x >. 3. Set the < IEEE 802.1x setting(EAPOL using EAP-TLS) >. • Enable IEEE 802.1x : Specify the use of the 802.1x protocol. • EA[...]

QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < QoS >. 3. Click the [ Add ( ) ] button. The IP list will be created. 4. Enter an IP address to which you will apply QoS. M ` The default prefix for IPv4 is 32; For DSCP , the default is [...]

setup screen • Enable SNMP T rap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generated when the community information i[...]

UPnP discovery Cameras can be automatically searched in the client and operating system in support of the UPnP protocol. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < UPnP discovery >. 3. Set the < UPnP discovery >. • UPnP discovery : It specifies Able or Disable for UPnP Discovery . • Friendly name : Disp[...]

setup screen EVENT SETUP FTP / E-mail When an event occurs, you can set the FTP/email server to send an image recorded by your camera. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < FTP / E-mail >. 3. Select < FTP configuration > or < E-mail configuration > and enter / select a desired value. • FTP config[...]

• E-mail configuration - Server address : Enter the IP addr ess of the e-mail server to send an event image. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server . - Password : Enter the user account passwor d for logging into the email server . [...]

setup screen T o make r ecording on the Micro SD memory 1. Check the memory card’ s < Free > size and < T otal > size. 2. If there ar e sufficient free space, set the device to < On >. Otherwise, check the stored data and if you find them not important, then click < Format > to format the Micro SD memory . ` Some frames ma[...]

Time schedule You can set to save the video data at a certain interval as scheduled regardless of the actual occurrence of the event. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Time schedule > from < Event action setup >. 4. Set whether or not to < Enable >. 5. Specify t[...]

setup screen T ampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < T ampering detection > fro[...]

Motion detection Events of motion detection can be set to trigger event signal output. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Motion detection > from < Event action setup >. 4. Set whether or not to < Enable >. 5. Set < Sensitivity >, < Size > and < Ar[...]

setup screen J ` Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. ` Detected size of an object may have difference with the actual size according to its shape. ` Up to 16 objects from the top side of the screen can be displayed. ` In the following cases, effective functioning of motion detection ma[...]

T o use Motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select a motion detection mode. 2. Select < Sensitivity > tab to set the sensitivity level. Y ou can set the sensor’ s sensitivity to detect a motion out of the background fr om the monitoring video. J ` In a situation that def[...]

setup screen 4. Select < Area > tab. Y ou can specify an area on the scr een to include or exclude the area to/fr om detection. Y ou can specify up to 4 areas. • Detection ar ea : Sets the entire screen as excluded fr om detection, and adds specified area as motion detection area. Select 4 vertices in the image with your mouse to specify th[...]

Audio detection You can set to detect sound over the specified level and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Event setup >. 3. Select < Audio detection > from < Event action setup >. 4. Set whether or not to < Enable > . 5. Set the audio detection’ s sound le[...]

setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Product information >. 3. Check the camera information, or provide details accor ding to your network environment. • Model : Model name of the pr oduct. • Serial number : Pr oduct serial number . • Device name : Pr ovide[...]

Date & Time 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Date & Time >. 3. Specify the time and date that will be applied to the camera. • Curr ent system time : Displays the current time settings of your system. • Timezone : Specify the local time zone based on the GMT . • Use daylight saving time : I[...]

setup screen User 1. From the Setup menu, select the < System ( ) > tab. 2. Click < User >. 3. Provide the necessary user information. • Administrator passwor d change : Change the password for the administrator . ` The default password (4321) can be exposed to a hacking threat so it is recommended to change the password shortly after[...]

Upgrade / Reboot 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Upgrade / Reboot >. 3. Select a desired item and set it appropriately . • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default. - Except network parameter : Initialize all setup parameters except for ne[...]

setup screen M ` Depending on network condition, the upgrade can take from as little as 3 minutes to a maximum of 20 minutes. If you forcibly terminate the upgrade process, upgrade will not be completed properly . ` During restarting the system, accessing with web viewer will not be made. ` Y ou can download the latest version from the Samsung web [...]

Log You can check the system log or event log. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Log >. 3. Select a log type. • System : Y ou can check the system logs where any system changes are r ecorded including the time information. • Event : Y ou can check the event logs including the time information. 4. From[...]

setup screen Profile access You can check the video profile of the camera being connected now. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Profile access >. • Pr ofile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec. - Bitrate(kbps) : Show both t[...]

appendix SPECIFICA TION Items Description SNF-7010 SNF-7010V Video Imaging Device 1/2.8” 3M PS CMOS Total Pixels 3megapixel Scanning System Progressive Min. Illumination 1.3Lux Video Out - Lens Focal Length (Zoom Ratio) 1.05mm Max. Aperture Ratio F2.8 Angular Field of View H : 170°, V : 180°, D : 178° Min. Object Distance 0.3M Lens Type Fixed [...]

appendix Items Description SNF-7010 SNF-7010V Operational Digital Image Stabilization - Defog Auto/Manual/Off Motion Detection Off / On (4ea 4 Points Polygonal zones) Audio Detection Off / On Privacy Masking Off / On (32 Zones with 4 Points of Polygonal ) Gain Control Off / Low / Middle / High White Balance ATW / AWC / Manual / Indoor / Outdoor Ele[...]

Items Description SNF-7010 SNF-7010V Network Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264, MJPEG Resolution 2048x1536 / 1600x1200 / 1280x960 / 1024x768 / 800x600 / 640x480 / 320x240 Max. Framerate 3M 20fps Dewarping Client : Smart Viewer Viewing Composition ========Camera======= 360° Fisheye ========Client======== Single Panorama D[...]

appendix Items Description SNF-7010 SNF-7010V Network Bitrate Control Method H.264 : CBR or VBR MJPEG : VBR Streaming Capability Multiple Streaming (Up to 6 Profiles) Audio Compression Format G.711 µ-law G.726 : 16Kbps, 24Kbps, 32Kbps, 40Kbps Audio Communication Bi-directional IP IPv4, IPv6 Protocol TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP, RTSP, [...]

Items Description SNF-7010 SNF-7010V Network Webpage Language English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Polish, Turkish, Rumanian, Serbian, Dutch, Croatian, Hungarian, Greek, Norway, Finland Web Viewer Supported OS : Windows XP / VISTA / 7 / 8, MAC OS X 10.8, 10.7 Supported Br[...]

appendix PRODUCT OVERVIEW SNF-7010 Unit : mm (inch) Ø 128.8 (32.7") 45 (11.4") 24 (6.1") 3 8 (9.7") 120° 120° 40° 3- Ø 4.8 (1.2") HOLE Ø 113 (28.7") 100_ appendix[...]

SNF-7010V Unit : mm (inch) 128.8 (32.7") 58.8 (2.31") 24 (6.1") 40.4 (1.59) 3 8 (9.7") 3- Ø 4.8 (1.2") 120° 120° 40° English _101 ● APPENDIX[...]

appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any problem.[...]

PROBLEM SOLUTION <Motion detection> of <Event setup> is set to <Enable>, but no notification e-mail reaches me even when a motion event had occurred. y Verify the settings in the following sequence: A. Check <Data & Time> settings. B. The <Motion detection> should be set to <Enable>. C. Check if the <E-mai[...]

OPEN SOURCE ANNOUNCEMENT GPL/LGPL software license The software included in this product contains copyrighted softwar e that is licensed under the GPL/LGPL. Y ou may obtain the complete Corresponding Source code fr om us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com. If you want to obt[...]

GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C)1989, 1991 Free Software Foundation, Inc. 51 Franklin Street,Fifth Floor , Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away y[...]

3. Y ou may copy and distribute the Program (or a work based on it, under Section 2)in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following : a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 a[...]

NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW . EXCEPT WHEN OTHERWISE ST A TED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER P ARTIES PROVIDE THE PROGRAM “ASIS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED T[...]

Finally , every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose omputers, but in those that do, we wish to avoid the special anger that patents applied to a free program could make it ffectively proprietary . T o prevent this, the GPL assures that a[...]

5. Conveying Modified Source V ersions. Y ou may convey a work based on the Program, or the modifications to produce it from the Pr ogram, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b)[...]

7. Additional T erms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be tr eated as though they were included in this License, to the extent that they are valid under applicable law . If a[...]

In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). T o “grant” such a patent license to a party means to make such an agreement or commitment not to enfo[...]

OpenSSL Combined License The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core[...]

BSD License Some software components of this product incorporate sour ce code covered under the BSD license as follows. Component Name License URL net-snmp-5.7.1 pcre-8.20 openssh-5.9p1 libcap-1.2.1 lighttpd-1.4.31 Game-ws MiniUPnP Project Client pppd-2.4.5 BSD BSD BSD BSD 2.0 BSD 2.0 BSD 2.0 BSD 2.0 BSD 3.0 http://www .net-snmp.org/about/license.h[...]

3. Neither the name of the Regents of the University of California nor the names of its contributors may be used to endorse or promote products derived fr om this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTA[...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTA[...]

The MIT License Some software components of this product incorporate sour ce code covered under the MIT license as follows MIT License 2.0 - Acewidget, bettermeans, jquery-ui, libxml, libxml2, Mesa3D-MesaLib,mwEmbed,OpenGL Samples Pack, Wide Studio, xorg-server , dropbear-2012.55, ncurses-5.7 Copyright (c) 2011, The Dojo Foundation Copyright 2010, [...]

1.11. ‘’Source Code’ ’ means the preferred form of the Cover ed Code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an Executable, or source code differ ential comparisons against either the Original Code or another we[...]

3.5. Required Notices. Y ou must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then Y ou must include such notice in a location (such as a relevant directory) wher e a user would be likely to look for such a notice. If Y ou created o[...]

8.3. If Y ou assert a patent infringement claim against Participant alleging that such Participant’ s Contributor Version dir ectly or indirectly infringes any patent where such claim is r esolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such[...]

The Independent JPEG Group’ s JPEG Software The software included in this product contains copyrighted softwar e that is licensed under the JPEG license. • JPEG license - Code project – Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Independent JPEG Group’ s free JPEG software. Y ou are welcome[...]

T -Ker nel License - This Product uses the Source Code of T -Kernel under T -License granted by the T -Engine Forum(www .t-engine.org) T -License [License Agreement for Source Code of T -Kernel] established by T -Engine Forum on January 23, 2004 revised on June 17, 2004 revised on December 21, 2006 revised on March 24, 2009 Article 1. Scope of Lice[...]

Article 4. License of Source Code 1. As provided for in this Article, T -Engine Forum shall provide, and grant a license to use, the Source Code fr ee of charge to any person who has taken the necessary procedure for r egistration as prescribed by T -Engine Forum and agreed to the T -License. 2. The Source Code shall be distributed exclusively by T[...]

T -Kernel. Provided, however , that the Ported Source Code may be treated in the same way as the Modified Source Code until the time of registration hereunder . 5. The provision set forth in Article 3 shall apply to the Ported Source Code register ed in accordance with this Article. Article 7. Use for Other Purpose 1. Any use of the Source Code, th[...]

authorized to submit on behalf of the copyright owner . For the purposes of this definition, "submitted" means any form of electronic, verbal, or written communication sent to the Licensor or its representatives, including but not limited to communication on electronic mailing lists, source code contr ol systems, and issue tracking system[...]

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer . 2. The origin of this software must not be misrepr esented; you must not claim[...]

PHP 3.01 License The PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved. Component Name License URL php-5.2.17 PHP 3.01 http://www.php.net/distributions Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met: 1. Redistributions [...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has[...]

[...]

SALES NETWORK SAMSUNG TECHWIN CO ., L TD. Samsungtechwin R&D Center , 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 F AX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 T oll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-3[...]