Samsung SNP-6200RH инструкция обслуживания

NETWORK CAMERA User Manual SNP-6200RH[...]

Copyright ©2013 Samsung T echwin Co., Ltd. All rights reserved. T rademark is the r egis tere d log o of Sa msung Tech win C o., Ltd . The n ame of t his pr oduc t is th e regi ster ed tra dema rk of S ams ung Techw in Co., L td. Oth er tr adem ark s ment ione d in thi s manu al are t he regi ster ed tr adem ark of t heir r espe cti ve co mpany. R[...]

English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufactur er’ s instructions. 8. Do not i[...]

over view 4_ overview W ARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be pl[...]

English _5 ● OVERVIEW Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. These servicing instructions are for use by qualified service person[...]

over view 6_ overview Please read the following recommend safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not place this apparatus near conductive material. y Do not attempt to service this apparatus yourself. y Do not install near any magnetic sources. y Do not block any ventilation openings. y Do not place h[...]

English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Featur es 10 Recommended PC Specifications 10 Recommended SD/SDHC Memory Card Specifications 11 What’ s Included 12 At a Glance INST ALLA TION & CONNECTION 16 18 Connecting with other Device 20 Installation 28 Inserting/Removing a SD Memory Card 30 Memory Ca[...]

over view 8_ overview SETUP SCREEN 58 58 Setup 58 Audio & Video Setup 79 Network Setup 88 Event Setup 102 System Setup APPENDIX 108 108 DIP Switch Setting 118 Camera Wiring 119 Specification 123 Product Overview 124 T roubleshooting 126 Open source license notification on the product WEB VIEWER 44 44 Connecting to the Camera 45 Login 46 Install[...]

English _9 ● OVERVIEW PRODUCT FEA TURES • Full HD Video Quality • Multi-Str eaming This network camera can display videos in differ ent resolutions and qualities simultaneously using differ ent CODECs. • W eb Browser -based Monitoring Using the Internet web browser to display the image in a local network environment. • Alarm If an event o[...]

over view 10_ overview RECOMMENDED PC SPECIFICA TIONS • CPU : Intel Cor e 2 Duo 2.6GHz or higher • Operating System : Microsoft Windows 7/VIST A/XP SP3, Apple MAC OS X • Resolution : 1280X1024 pixels or higher • RAM : 2GB or higher • W eb Browser : Internet Explorer 10.0(32bit)/9.0(32bit)/8.0(32bit)/7.0(32bit) or Higher , Firefox 9.0 or H[...]

English _11 ● OVERVIEW WHA T’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Main Body 1 Instruction book, Installer S/W CD, CMS S/W DVD 2 Quick Guide (Optional) 1 Warranty card (Optional) 1 Cable for the testing monitor 1 Used to test the camera connectio[...]

over view 12_ overview A T A GLANCE Appearance Item Description a Main unit Protects the internal PTZ mechanism from the direct sunlight, rain or external impact. b Shield cover Shield cover for the lens and unit protection. c Safety Cable The cable prevents the product from dropping during installation. c a b[...]

English _13 ● OVERVIEW Inside Item Description a SD Memory Card Compartment Compartment for the SD memory card. M Refer to < Inserting/Removing a SD Memory Card > for the SD memory card insertion position. (page 28) b Initialization Switch The camera is reset to factory initialization condition. M ` For details, refer to < Upgrade / Rebo[...]

over view 14_ overview Bottom View of Installation Base Item Description a Communications Setup Switch Set the transfer rate and protocols. b ID Setup Switch Specify the camera ID. c Communications and AUX Ports Used for RS-485/422 communications. d Audio Input Port Used to connect the audio input cable. e Audio Output Port Used to connect the audi[...]

English _15 ● OVERVIEW Item Description f Network Connections Used to connect the LAN cable. (10/100Mbps supported) g Video Out Port Analog video output port. (for installation) h Power Port Used to connect the power. i Alarm I/O Port Used to connect the alarm I/O cable.[...]

16_ installation & connection installation & connection ` Camera Wiring Interface Board For the camera wiring, please refer to the picture below. 2N.C 2N.0 COM2 1N.C 1N.0 COM1 GND IN4 IN3 GND IN2 IN1 Alarm IN1 IN2 GND IN3 IN4 GND 1C0M 1.N0 1.NC 2C0M 2.N0 2.NC AXICOM IMO3 5VDC AXICOM IMO3 5VDC AXICOM IMO3 5VDC Video Out AUDIO_OUT AUDIO_IN Po[...]

English _17 ● INST ALLA TION & CONNECTION J ` The maximum power capacity of the alarm and AUX outputs is 30VDC/2A, 125VAC/0.5A, and 250V AC/0.25A. ` When connecting alarm input and output cables, be sure to connect one cable to each terminal respectively . ` T o connect products over the camera’ s capacity , please use an additional relay d[...]

installation & connection 18_ installation & connection CONNECTING WITH OTHER DEVICE Preparing Adapter and Cable J ` Connect the camera to the power adaptor . Then, plug the power cord of the adaptor to the wall outlet. Check out the rated voltage and current before making connections. Rated Power Allowable Input Voltage Current Consumption[...]

English _19 ● INST ALLA TION & CONNECTION Electrical Resistance of Copper Wire at [20°C (68°F)] Copper Wire Gauge (AWG) #24(0.22mm 2 ) #22(0.33mm 2 ) #20(0.52mm 2 ) #18(0.83mm 2 ) Resistance (Ω/m) 0.078 0.050 0.030 0.018 Drop Voltage (V/m) 0.028 0.018 0.011 0.006 Recommended Distance (m) Less than 20 Less than 30 Less than 30 Less than 30 [...]

installation & connection 20_ installation & connection J ` This product is a network camera that transfers video over a network; the video output terminal is used to set the imaging range of the camera at installation. ` Using the terminal for monitoring purposes may cause problems such as degradation in video quality . ` It is not suitabl[...]

English _21 ● INST ALLA TION & CONNECTION Installing by wall mount ` Fix the installation base with the bracket 1. Fix the base with the bracket by turning it clockwise. 2. As shown in the picture below , gently press and lift up the handle of the hinged door on the bottom of the installation base. Please refer to the “ Camera Wiring Interf[...]

installation & connection 22_ installation & connection 4. Assemble Camera and Installation Base Assemble the installation base and camera by matching the installation direction guides. 5. Attach Camera T urn the camera frame counterclockwise until the protrusions on the camera frame and installation base become matched perfectly . 6. Secur[...]

English _23 ● INST ALLA TION & CONNECTION Notes for W aterproofing This model is an integrated housing product for outdoor installation. ` When combining the main body and the wall mount for installation on the wall 1. Install the wall mount on the vertical wall. When it is installed on an inclined wall, moisture may permeate into the main bo[...]

installation & connection 24_ installation & connection ` When combining the main body and the ceiling mounting adaptor for installation on the wall 1. Wrap the scr ew part of the housing with a sufficient amount of T eflon tape for assembly . 2. Please make sure that the gasket is not disassembled from the shield cover when the shield cove[...]

English _25 ● INST ALLA TION & CONNECTION • W all mount (SBP-300WM) 2. If installing the camera on the ceiling • Ceiling Mount (SBP-300CM) 3. If installing the wall mount (SBP-300WM/SBP-300WM1) on an at least 80mm-long cylinder • Pole Mount (SBP-300PM)[...]

installation & connection 26_ installation & connection 4. If installing the wall mount (SBP-300WM/SBP-300WM1) on a corner of the wall • Corner Mount (SBP-300KM) 5. If installing on a building rooftop • Parapet Mount (SBP-300LM)[...]

English _27 ● INST ALLA TION & CONNECTION Wall mount (SBP-300WM1) Ceiling Mount (SBP-300CM) Wall mount (SBP-300WM) Parapet Mount (SBP-300LM) ` Mount Joint[...]

installation & connection 28_ installation & connection INSERTING/REMOVING A SD MEMOR Y CARD J ` Disconnect the power cable from the camera before inserting the SD memory card. ` Tighten the screws when assembling the camera body , shield cover and SD holder bracket to prevent moisture penetration. ` When mounting or dismounting an SD memor[...]

English _29 ● INST ALLA TION & CONNECTION 4. Pull up the SD holder bracket and push the SD memory card to the arr ow direction as shown in the figure. J ` Do not insert the SD memory card while it’ s upside down by force. Otherwise, it may damage the SD memory card. 5. Assemble the camera in the reverse or der of disassembly after the SD me[...]

installation & connection 30_ installation & connection MEMOR Y CARD INFORMA TION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’ s suitable for [...]

English _31 ● NETWORK CONNECTION AND SETUP Y ou can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTL Y TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN 1. Launch an Internet browser on the local PC. 2. Enter the IP address of the camera in the addr ess bar of the brows[...]

32_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTL Y TO A DHCP BASED DSL/CABLE MODEM 1. Use the cross LAN cable to connect the network cable dir ectly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3.[...]

English _33 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTL Y TO A PPPoE MODEM 1. Use the cross LAN cable to connect the network cable dir ectly to your PC. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. 3. Use the Internet browser to con[...]

34_ network connection and setup network connection and setup CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connect[...]

English _35 ● NETWORK CONNECTION AND SETUP BUTTONS USED IN IP INST ALLER Item Description a Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Alias This function is not currently implemented. c Mode Displays either < Static >, <[...]

36_ network connection and setup network connection and setup Item Description g URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed. h IPv4 Scans for cameras with the IPv4 setting. i IPv6 Scans for cameras with the IPv6 setting. [...]

English _37 ● NETWORK CONNECTION AND SETUP 3. In the < Address > pane, pr ovide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requir es no user setting. M ` Y ou can configure the static IP settings only if the DHCP checkbox is unchecked. If not using a B[...]

38_ network connection and setup network connection and setup If using a Broadband Router • IP Addr ess : Enter an address falling in the IP range provided by the Br oadband Router . ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The < Subnet Mask > of the Broadband Router will be the < Subnet Mask > of the [...]

English _39 ● NETWORK CONNECTION AND SETUP Auto Network Setup Run < IP Installer_v2.XX.exe > to display the camera search list. At the initial startup, both [ Auto Set ] and [ Manual Set ] will be grayed out. M ` For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function. 1. Select [...]

40_ network connection and setup network connection and setup DYNAMIC IP SETUP Dynamic IP Environment Setup • Example of the Dynamic IP envir onment - If a Br oadband Router , with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera dir ectly to modem using the DHCP protocols - If IPs ar e assigned by the in[...]

English _41 ● NETWORK CONNECTION AND SETUP PORT RANGE FOR W ARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding 1. From the Setup men u of the Broadband Router , select[...]

42_ network connection and setup network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. J ` If you don’t set properly the TCP 943 port of the router[...]

English _43 ● NETWORK CONNECTION AND SETUP CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC 1. Run the IP Installer . It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera. M ` Access to the camera can also be gained by typing the camera’ s IP add[...]

44_ web viewer web viewer CONNECTING TO THE CAMERA Normally , you would 1. Launch the Internet browser . 2. T ype the IP addr ess of the camera in the address bar . ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear . • IP address (IPv6) : 2001:230:abcd: ff ff:0000:0000:ff ff:1111  http://[2001:[...]

English _45 ● WEB VIEWER T o check the DDNS address If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server. If this is the case, you will not be informed of the IP address changed by DDNS. Once[...]

46_ web viewer web viewer INST ALLING ACTIVEX If connecting to a camera for the first time, you will see the installation message. Then, install the required ActiveX to access the camera and control the video from it in real time. 1. Click [ Install ] in the yellow security warning display box at the bottom of the page after initial monitoring page[...]

English _47 ● WEB VIEWER INST ALLING SIL VERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. 1. Click < Click Here >. 2. When the file download dialog pops up, click <[...]

48_ web viewer web viewer 5. When done, click < Close >. 6. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen. J ` For normal installation, set the Block Popup setting as follows: ex) Internet Explorer  T ools  Block Popup  T ur n Off Pop-[...]

English _49 ● WEB VIEWER USING THE LIVE SCREEN Item Description a Monitoring Move to the monitoring screen. b Playback Switch to the monitoring screen that plays recording data in the SD memory. c Setup Move to the Setup screen. d Viewer Screen Displays the Live video on the screen. e Auto Focus Fit the focus automatically. f AUX Turn on or off t[...]

50_ web viewer web viewer Item Description h Audio/Microphone Control Activate the audio and microphone and control the audio’s volume. i Hide the alarm indicator Hides the alarm indicator near the border of the viewer screen. ` In the following cases, the alarm message will pop up on the border of the viewer . - If an event (alarm, motion detect[...]

English _51 ● WEB VIEWER T o enable the Area Zoom mode From the viewer screen, right-click to display the context menu below: Menu items and descriptions • Ar eaZoom : Zoom the area selected with the mouse. • Goto 1X : Change the curr ent zoom factor to x1. • Pr ev : Return to the previous area and settings. • Next : If navigated with Pr [...]

52_ web viewer web viewer T o toggle the audio sound 1. Click the [ Audio ( ) ] button. The corresponding button will be displayed in the Viewer . 2. Click the button to listen to / mute the sound as you wish. This button operates as a toggle button. T o toggle the microphone sound 1. Click the [ Mic ( ) ] button. The corresponding button will be d[...]

English _53 ● WEB VIEWER T o control the PTZ 1. Press the [ PTZ ( ) ] button. 2. When the PTZ button bar appears on the screen, use the dir ection buttons to adjust the camera angle, zoom factor or focus to your prefer ence. M ` For further details on PTZ use, refer to “ PTZ setup ”. (page 63 ) PLA YING THE RECORDED VIDEO M ` Before you can p[...]

54_ web viewer web viewer Item Description a Search range setting Set the search date and time from the data saved in the SD memory card. b Search event setting Set the event type to search within the search period. c Event search Run the event search. 1. Click the [ Playback ( ) ] button. 2. Specify the start time and end time of your search. 3. S[...]

English _55 ● WEB VIEWER T o play after searching by time Item Description a Time bar The section in the specific period is played by moving the time bar. b Search date setting Set the search date using the calendar. ` Dates for which there is video in the SD memory card are displayed within the boxes on the calendar . c Full screen The current i[...]

56_ web viewer web viewer Item Description g Video information Time data of the replayed video is displayed on the screen. h Backup Time zone is set to back up the video saved in the SD memory card. ` Can be set as up to 5 minutes. J ` The time search is not available with other web browsers than Internet Explorer . 1. Click [ Search by Time ( ) ].[...]

English _57 ● WEB VIEWER T o back up the searched video 1. Click [ ] on the scene to back up. Save as window appears. 2. Confirm the save path and click [ Save ] button. The selected data will be backed up to the specified path in .avi format. T o play the backup video You can play the video stored (for the backup purpose) with Windows Media Play[...]

58_ setup screen SETUP You can configure the audio & video, network, event and system settings of the camera via the network. 1. In the Live screen, click [ Setup ( ) ]. 2. The Setup screen appears. AUDIO & VIDEO SETUP Video profile 1. From the Setup menu, select the < Audio & Video ( ) > tab. 2. Click < Video profile >. 3. [...]

English _59 ● SETUP SCREEN T o add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. 1. Select a profile number . 2. Provide the name and select a codec. 3. Specify the conditions under which the codec will be applied. 4. Specify the details of the selected c[...]

setup screen 60_ setup screen • Pr ofile : Y ou can select the H.264 profiling method. • Entr opy coding : Reduce the possible compression loss due to encoding. • Smart codec : Specify the use of Smart codec. J ` The Smart Codec will be active only if the codec is of H.264 and the compression system is CBR. • Multicast(SVNP) : Specify the u[...]

English _61 ● SETUP SCREEN Video setup 1. From the Setup menu, select the < Audio & Video ( ) > tab. 2. Click < Video setup >. 3. Select a < Video source > mode. • Flip/Mirr or mode : Displays the video from the camera upside down or reversely . • Digital Flip : This limits the vertical screen navigation range of the cam[...]

setup screen 62_ setup screen Audio setup You can configure the I/O settings of the audio source from the camera. 1. From the Setup menu, select the < Audio & Video ( ) > tab. 2. Click < Audio setup >. 3. Set the audio input value. • Enable : This sets the option to use the audio input. • Apply power to Ext. Mic. : If the extern[...]

English _63 ● SETUP SCREEN PTZ setup You can change the direction of lens and activate the zoom. 1. From the Setup menu, select the < Audio & Video ( ) > tab. 2. Click < PTZ setup >. 3. Click [ Direction Adjustment ( ) ]. • [ Change dir ection to ( )/( )/ ( )/( ) ] : Change the direction of camera lens. • [ Moving speed contro[...]

setup screen 64_ setup screen T o add a pr eset 1. Select the preset number to add. 2. Set the name for the preset. 3. Press the [ ] button. T o delete a pr eset 1. Select the preset number to delete. 2. Press the [ ] button. T o move to a desir ed preset 1. Select a preset number that you want to move. 2. Press the [ ] button. T o configur e the d[...]

English _65 ● SETUP SCREEN T o set the home position 1. Move to a desired start scr een point and press [ ]. The point will be set to the home position. 2. Click [ ] in the home position. Y ou will move to the predetermined home position. T o configur e the swing settings Swing is a monitoring function that moves between two preset points and ena[...]

setup screen 66_ setup screen T o set a gr oup The group function enables you to group various presets before calling them in sequence. Each group can contain up to 128 presets. 1. Set < Mode > in < Sequence setup > to < Group >. The menu screen will switch to the group setting scr een. 2. Select a group setting mode. • Gr oup N[...]

English _67 ● SETUP SCREEN 3. Press the [ ] button. Y our settings will be entered in the right list. 4. Press the [ ] button. Set data on the right list will be saved. 5. Press the [ ] button. It performs the tour operation. 6. Press the [ ] button. The running tour will be stop. 7. Press the [ ] button. Selected tour data will be deleted. T o s[...]

setup screen 68_ setup screen T o set the auto run This feature will activate the predefined sequence function if the user does not manipulate anything on the product for a certain time. 1. Set < Mode > in < Sequence setup > to < T race & Auto Run >. The menu screen will switch to the PTZ tracking and Auto execution menu scree[...]

English _69 ● SETUP SCREEN • Action : PT limiting operation is set. - [ ] : Start limit setting. - [ ] : Provide the start and end points. - [ ] : If you want to change the point setting, click this to return to the input dialog. Smart codec setup Set a desired area of the video incoming from the camera as ROI area and specify the detection sen[...]

setup screen 70_ setup screen Camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the < Audio & Video ( ) > tab. 2. Click < Camera setup >. 3. Configure the settings as necessary of : Sensor , SSDR, White balance, Backlight, Exposure, Special, Focus[...]

English _71 ● SETUP SCREEN White balance Setup You can correct the image colors based on white under any lighting conditions. 1. Select < White balance >. 2. Select < Mode >. • A TW : Corrects the colors of the camera video automatically . • Manual : Y ou can adjust the r ed and blue gains of the camera video manually . • AWC : [...]

setup screen 72_ setup screen BLC Setup You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select < Backlight >. 2. Set < Mode > to < BLC >. 3. Select each item and set it properly . • BLC level : Y ou can change the level to adjust the brightness of the monitoring area. • BL[...]

English _73 ● SETUP SCREEN WDR Setup You can set to display a sharp image of the objects in a scene where both bright and dark areas exist. 1. Select < Backlight >. 2. Set < Mode > to < WDR >. 3. Select each item and set it properly . • WDR Level : Specify the WDR sensitivity level. M ` If WDR mode is active, the shutter mode [...]

setup screen 74_ setup screen ` For the best WDR performance, it is recommended to set the Iris mode to < Auto >. ` Since the auto focus operation can be repeated depending on the lighting condition if user backlight compensation is used, it is recommended to use the focusing mode of < One Shot AF > or < Manual >. ` SSDR and shutt[...]

English _75 ● SETUP SCREEN • Sens-up limit : Set the work condition to Auto mode in a low contrast scene. • Iris : Y ou can set the camera iris to Auto or Manual to your pr eference. - Auto : Automatically sets the iris adaptively to the ambient lighting and shutter speed. - Manual : Iris F-No is set manually . • Iris F-No : If the iris mod[...]

setup screen 76_ setup screen • Dwell time : This is the time while each applicable lighting condition is kept in order to enable the switch between day and night modes. • Duration : Specify the time interval of lighting at which the sequence operation is triggered. • Sharpness mode : Adjust the overall sharpness of the image. If selecting &l[...]

English _77 ● SETUP SCREEN OSD Setup 1. Select < OSD >. 2. Select each item and set it properly . • Camera title : Specify whether or not to display the camera title on the screen. ` Y ou can enter up to 15 characters for the title. • Camera title position X, Y : Specify the coor dinates where the camera title is displayed on the screen[...]

setup screen 78_ setup screen IR Setup 1. Select < IR >. 2. Select each item and set it properly . • IR Mode: - Of f : T urns off IR LED. - On : T ur ns on IR LED. When using, the daytime/nighttime mode of the special is set to B/W . - Day & night : T ur ns on/off IR according to the day & night mode. When the mode is set, the day &[...]

English _79 ● SETUP SCREEN NETWORK SETUP Interface 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Interface >. 3. Set the < Interface > and < IPv6 setup > as necessary . • IP type : Select an IP connection type. - Manual : Specify the IP addr ess, Subnet mask, Gateway , DNS1, and DNS2. - DHCP : Specif[...]

setup screen 80_ setup screen Port 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < Port >. 3. T ype in each item in the Port menu as necessary . ` Neither the port range between 0 and 1023 nor port 3702 is available. • HTTP port : HTTP port used to access the camera via the web browser . The default is 80(TCP). ` Se[...]

English _81 ● SETUP SCREEN DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < DDNS >. 3. Select the < DDNS > connection type. 4. T ype in the DDNS [...]

setup screen 82_ setup screen Registering with DDNS T o r egister your product with the Samsung DDNS 1. Visit the iPOLiS web site(www . samsungipolis.com) and sign in with a register ed account. 2. From the top menu bar , select < DDNS SERVICE > - < MY DDNS >. 3. Click [ PRODUCT REGISTRA TION ]. 4. Enter the product ID. ` Y ou must perf[...]

English _83 ● SETUP SCREEN T o connect to the Samsung DDNS in camera setup 1. From the DDNS setup page, set < DDNS > to < Samsung DDNS >. 2. Provide the < Pr oduct ID > that you register ed product ID with the DDNS site. 3. Click [ Apply ( ) ]. When the connection is successfully made, you will see the message of < (Success) [...]

setup screen 84_ setup screen IP filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < IP filtering >. 3. Select < Filtering type >. • Deny : If selecting this, access fr om those IPs that are added to the filtering will be restric[...]

English _85 ● SETUP SCREEN SSL You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < SSL >. 3. Select a secure connection system. ` T o access the camera using HTTPS mode, you have to type the IP address for the camera in the for[...]

setup screen 86_ setup screen 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < 802.1x >. 3. Set the < IEEE 802.1x Setting(EAPOL using EAP-TLS) >. • Enable IEEE 802.1x : Specify the use of the 802.1x[...]

English _87 ● SETUP SCREEN QoS You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the < Network ( ) > tab. 2. Click < QoS >. 3. Enter an IP address to which you will apply QoS. M ` The default prefix for IPv4 is 32; For DSCP , the default is set to 63. 4. Select an IP addres[...]

setup screen 88_ setup screen • Enable SNMP v3 : SNMP version 3 will be active. - Password : Specify the default password for SNMP version 3. The default password is < admin4321 >. ` The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. Note that the security and ot[...]

English _89 ● SETUP SCREEN - Port : The default port of the FTP server is 21; however , you can use a different port number according to the FTP server settings. - Passive mode : Select < On > if you need to connect in passive mode due to the firewall or the FTP server settings. • E-mail configuration - Use SSL : Specify the use of SSL. -[...]

setup screen 90_ setup screen T o make r ecording on the SD memory 1. Check the < T otal size > and the < Fr ee size >. 2. If the SD memory has a sufficient fr ee space, set < Record > to < On >. Otherwise, check the stored data and if you find them not important, then click < Format > to format the SD memory . ` If yo[...]

English _91 ● SETUP SCREEN Alarm input 1 ~ 4 You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Alarm input >. 3. Specify an input device. • T ype - Normal Open : It is normally open, but if it is closed, an alarm will be triggered. - Normal Close :[...]

setup screen 92_ setup screen V A / MD This can be set to generate an event signal when a motion or intelligent video analysis event is detected. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < V A / MD >. J ` DIS cannot be used if VA/MD is used. ` To use Motion detection (MD) 1. Select a motion detection mode. 2. Set &[...]

English _93 ● SETUP SCREEN ` To use Intelligent Video Analysis (VA) 1. Select an Intelligent Video Analysis mode. 2. Set < IV analysis function > to < Enable >. 3. Select a type. • Line/Ar ea : This detects the change as an object passes across the line or zone set up by the user . • Appearing/Disappearing : This detects an object[...]

setup screen 94_ setup screen J ` Motion Detection and Intelligent Video Analysis cannot be used simultaneously . ` Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. ` Detected size of an object may have difference with the actual size according to its shape. ` Up to 16 objects from the top side of [...]

English _95 ● SETUP SCREEN ` To set the video analysis rules (VA) Line / Area • Minimum Object Size 1. Set < IV analysis function > to < Enable >. 2. Set the type to < Line/Area >. 3. Set the event rule to < Minimum Object Size >. 4. Drag and drop to a desir ed point of the video. The minimum object size will be applied [...]

setup screen 96_ setup screen • Virtual line based rules 1. Set < IV analysis function > to < Enable >. 2. Set the type to < Line/Area >. ` The virtual line based rules can be specified only if the intelligence video analysis type is set to < Line/Area >. 3. Set the event rule to < Virtual line based rules >. 4. Clic[...]

English _97 ● SETUP SCREEN Appearing/Disappearing • Minimum Object Size 1. Set < IV analysis function > to < Enable >. 2. Set the type to < Appearing/ Disappearing >. 3. Set the event rule to < Minimum Object Size >. 4. Drag and drop to a desir ed point of the video. The minimum object size will be applied to the blue ar[...]

setup screen 98_ setup screen • Defined area based rules 1. Set < IV analysis function > to < Enable >. 2. Set the type to < Appearing/ Disappearing >. 3. Set the event rule to < Defined area based rules >. 4. Drag and drop to a desir ed point of the video. The selected area by the drag-and-dr op method will be set as spec[...]

English _99 ● SETUP SCREEN Network disconnect This can be set to generate an event signal when the physical network connection is cut off. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Network disconnect >. 3. Specify the use of “Network disconnect”. 4. Specify the activation time and activation condition. ` For[...]

setup screen 100_ setup screen Face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < Face detection >. 3. Set whether or not to < Enable >. 4. Set the sensitivity level. ` As the sensitivity grows, face detection becomes more close an[...]

English _101 ● SETUP SCREEN T ampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the < Event ( ) > tab. 2. Click < T ampering detection >. 3. Set whether or [...]

setup screen 102_ setup screen SYSTEM SETUP Product information 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Product information >. 3. Check the camera information, or provide details accor ding to your network environment. • Model : Model name of the pr oduct. • Serial number : Pr oduct serial number . • Devi[...]

English _103 ● SETUP SCREEN Date & Time 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Date & Time >. 3. Specify the time and date that will be applied to the camera. • Curr ent system time : Displays the current time settings of your system. • Timezone : Specify the local time zone based on the GMT . ?[...]

setup screen 104_ setup screen User 1. From the Setup menu, select the < System ( ) > tab. 2. Click < User >. 3. Provide the necessary user information. • Administrator Passwor d Change : Change the password for the administrator . J ` The default password can be exposed to a hacking thread so it is recommended to change the password [...]

English _105 ● SETUP SCREEN Upgrade / Reboot 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Upgrade / Reboot >. 3. Select a desired item and set it appropriately . • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default. - Except network parameter : Reset the other[...]

setup screen 106_ setup screen T o back up the curr ent settings 1. Click [ Backup ]. The Save As dialog should appear . 2. Specify the backup path with a proper file name, and click [ Save ]. The backup file will be saved to the specified path in the format of “ .bin ”. T o r estore the backup settings 1. T o r estore the backup settings, clic[...]

English _107 ● SETUP SCREEN Log You can check the system log or event log. 1. From the Setup menu, select the < System ( ) > tab. 2. Click < Log >. 3. Select a log type. • Syslog : Y ou can check the system logs where any system changes are r ecorded including the time information. • Evtlog : Y ou can check the event logs includin[...]

108_ appendix appendix DIP SWITCH SETTING How to set up Protocols and ID DIP Switches You can control various settings of the camera system using the Communication and ID DIP switches. Before installing the product, please set up the DIP switches according to the installation environment. 1. Set the switches according to your installation envir onm[...]

English _109 ● APPENDIX SW2 Pin No. Purpose 1~4 Protocol Settings 5~6 Baud Rate Settings 7 Transfer Method (RS-485/422) Settings 8 Response Mode Settings 9 RESERVED 10~11 Termination Settings 12 RESERVED • Pr otocol Settings Select a communication protocol for the camera. No. Protocol SW2-#1 SW2-#2 SW2-#3 SW2-#4 1 SAMSUNG-T OFF OFF OFF OFF 2 Pe[...]

appendix 110_ appendix • Baud Rate Settings Select the transfer speed of a selected communication protocol. No. Baud Rate (BPS) SW2-#5 SW2-#6 1 2400 ON ON 2 4800 ON OFF 3 9600 (Default) OFF OFF 4 19200 OFF ON • Communication Method Settings Select a communication method for the camera. Function ON OFF SW2-#7 Transfer Mode Switch RS-422(4Wire) R[...]

English _111 ● APPENDIX Camera ID DIP Switch Settings (SW1) To set up camera IDs, refer to the “ Camera ID Chart ” next. • Camera ID Chart ID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 1 ON/OFF OFF OFF OFF OFF OFF OFF OFF 2 OFF ON OFF OFF OFF OFF OFF OFF 3 ON ON OFF OFF OFF OFF OFF OFF 4 OFF OFF ON OFF OFF OFF OFF OFF 5 ON OFF [...]

appendix 112_ appendix ID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 29 ON OFF ON ON ON OFF OFF OFF 30 OFF ON ON ON ON OFF OFF OFF 31 ON ON ON ON ON OFF OFF OFF 32 OFF OFF OFF OFF OFF ON OFF OFF 33 ON OFF OFF OFF OFF ON OFF OFF 34 OFF ON OFF OFF OFF ON OFF OFF 35 ON ON OFF OFF OFF ON OFF OFF 36 OFF OFF ON OFF OFF ON OFF OFF 37 ON OFF O[...]

English _113 ● APPENDIX ID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 68 OFF OFF ON OFF OFF OFF ON OFF 69 ON OFF ON OFF OFF OFF ON OFF 70 OFF ON ON OFF OFF OFF ON OFF 71 ON ON ON OFF OFF OFF ON OFF 72 OFF OFF OFF ON OFF OFF ON OFF 73 ON OFF OFF ON OFF OFF ON OFF 74 OFF ON OFF ON OFF OFF ON OFF 75 ON ON OFF ON OFF OFF ON OFF 76 OFF OF[...]

appendix 114_ appendix ID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 107 ON ON OFF ON OFF ON ON OFF 108 OFF OFF ON ON OFF ON ON OFF 109 ON OFF ON ON OFF ON ON OFF 110 OFF ON ON ON OFF ON ON OFF 111 ON ON ON ON OFF ON ON OFF 112 OFF OFF OFF OFF ON ON ON OFF 113 ON OFF OFF OFF ON ON ON OFF 114 OFF ON OFF OFF ON ON ON OFF 115 ON ON OFF OF[...]

English _115 ● APPENDIX ID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 146 OFF ON OFF OFF ON OFF OFF ON 147 ON ON OFF OFF ON OFF OFF ON 148 OFF OFF ON OFF ON OFF OFF ON 149 ON OFF ON OFF ON OFF OFF ON 150 OFF ON ON OFF ON OFF OFF ON 151 ON ON ON OFF ON OFF OFF ON 152 OFF OFF OFF ON ON OFF OFF ON 153 ON OFF OFF ON ON OFF OFF ON 154 OFF[...]

appendix 116_ appendix ID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 185 ON OFF OFF ON ON ON OFF ON 186 OFF ON OFF ON ON ON OFF ON 187 ON ON OFF ON ON ON OFF ON 188 OFF OFF ON ON ON ON OFF ON 189 ON OFF ON ON ON ON OFF ON 190 OFF ON ON ON ON ON OFF ON 191 ON ON ON ON ON ON OFF ON 192 OFF OFF OFF OFF OFF OFF ON ON 193 ON OFF OFF OFF OFF[...]

English _117 ● APPENDIX ID SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 223 ON ON ON ON ON OFF ON ON 224 OFF OFF OFF OFF OFF ON ON ON 225 ON OFF OFF OFF OFF ON ON ON 226 OFF ON OFF OFF OFF ON ON ON 227 ON ON OFF OFF OFF ON ON ON 228 OFF OFF ON OFF OFF ON ON ON 229 ON OFF ON OFF OFF ON ON ON 230 OFF ON ON OFF OFF ON ON ON 231 ON ON ON O[...]

appendix 118_ appendix CAMERA WIRING Control Signal Connection • RS-485 Communications D+ D- TXD+ TXD- Camera Controller • RS-422 Communications D+ D- TXD+ TXD- TX+ TX- RXD+ RXD- Camera Controller Communications Cable For the camera to communicate with the controller, a RS-485/422 communications line is required. J ` A 30m or shorter leng[...]

English _119 ● APPENDIX SPECIFICA TION Items Description SNP-6200RHN SNP-6200RHP Video Imaging Device 1/3-type PS CMOS (Panasonic MN34041) Total Pixels 2010 (H) x 1108(V) Effective Pixels 1944 (H) x 1092(V) Scanning System Progressive Scan Min. Illumination Color : 1.5 Lux/F1.6(50IRE), B/W : 0 Lux (IR LED On) S / N Ratio 50dB Video Out CVBS : 1.0[...]

appendix 120_ appendix Items Description SNP-6200RHN SNP-6200RHP Operational Camera Title Off / On (Displayed up to 15 characters) Day & Night Auto (ICR) / Color / B/W Backlight Compensation Off / BLC / WDR / HLC Wide Dynamic Range 128X (60dB) Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise Reduction SSNRIII (2D[...]

English _121 ● APPENDIX Items Description SNP-6200RHN SNP-6200RHP Operational Alarm events y File upload via FTP, E-Mail y Notification via E-Mail, TCP y Local storage(SD/SDHC) recording at Network disconnected y External output y PTZ preset Network Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264 (MPEG-4 Part 10/AVC), Motion JPEG Res[...]

appendix 122_ appendix Items Description SNP-6200RHN SNP-6200RHP Network Security HTTPS(SSL) Login Authentication Digest Login Authentication IP Address Filtering User access Log 802.1x Authentication Streaming Method Unicast / Multicast Max. User Access 10 users at Unicast Mode Memory Slot SD/SDHC Memory Slot ONVIF Conformance Yes Webpage Language[...]

English _123 ● APPENDIX PRODUCT OVERVIEW Unit : mm (inch) 1-1/2inch PF T AP 20.0 (0.79") R85.0 (3.45") 202.5 (7.97") 177.0 (6.97") 399.5 (15.73") Ø 248.0 (9.75")[...]

appendix 124_ appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. y If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses withou[...]

English _125 ● APPENDIX PROBLEM SOLUTION No file is transferred via e-mail on occurrence of intelligent video analysis event of camera even when the <IV analysis function> is set to <Enable>. y Verify the settings in the following sequence: A. Check <Data & Time> settings. B. The <IV analysis function> should be set to[...]

OPEN SOURCE LICENSE NOTIFICA TION ON THE PRODUCT The software included in this product contains copyrighted softwar e that is licensed under the GPL/LGPL. Y ou may obtain the complete Corresponding Source code fr om us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain[...]

Y ou may charge a fee for the physical act of transferring a copy , and you may at your option offer warranty protection in exchange for a fee. 2. Y ou may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Pr ogram, and copy and distribute such modifications or work under the terms of Section 1 above, [...]

application of that system ; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is [...]

Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions o[...]

2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irr evocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is cover ed by this License only if the output,[...]

favor of coverage. For a particular product received by a particular user , “normally used” refers to a typical or common use of that class of product, regar dless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer pr oduct regardl[...]

10. Automatic Licensing of Downstream Recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. Y ou are not responsible for enforcing compliance by third parties with this License. An “entity transaction” is a tra[...]

15. Disclaimer of Warranty . THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW . EXCEPT WHEN OTHERWISE ST A TED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER P ARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCH[...]

Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library . The precise terms and conditions for copying, distribution and modification follow . Pay cl[...]

Library (because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore cover ed by this License. Section 6 states terms for distribution of such executables. When a “work that uses the Library” uses material from a header file that is part of the Library , the object code for the work [...]

If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply , and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity[...]

Computer Science Department at University College London 4. Neither the name of the University nor of the Department may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING[...]

and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANT ABILITY , FITNESS FOR A P ARTICULAR PURPOSE AND NONINFRINGEMENT . I[...]

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ‘ ‘AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENTAL, SPECIAL, EXEMPLARY , OR CONSEQUENTI[...]

PHP License The PHP License, version 3.01 Copyright (c) 1999 - 2012 The PHP Group. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and th[...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has[...]

SALES NETWORK SAMSUNG TECHWIN CO ., L TD. Samsungtechwin R&D Center , 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 T oll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-37[...]