Samsung SP-R4232 инструкция обслуживания

English-1 Once you have unpacked your TV , check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer . Accessories List of Parts BN68-00766E-00 Power Cord (3903-000144) Anynet Cable (BN39-00518A) Owner ’s Instructions Remote Control (BN59-00462A) / AAA Batteries BN68-00766E-00Eng_0214 2/14/05 1[...]

English-2 Connecting VHF and UHF Antennas 1 Plug the antenna lead into the ANT 2 IN (AIR IN) on the TV . Use the antenna cable, an accessory included in the product package. Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. Connecting Cable TV 1 Plug the incoming cable into the ANT 1 IN (CABLE IN) on the T[...]

English-3 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your Cable box. This terminal might be labeled “ANT IN”, “VHF IN” or simply , “IN”. Connect this cable to a two-way splitter . Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way s[...]

English-4 Connecting CableCARD Y ou must obtain a CableCARD from a local cable service provider . 1 Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” is displayed on the screen. If the channel information does not exist, the message “Updating Channel List” is displayed during channel information configu[...]

English-5 Connecting a VCR Connecting a VCR to the Video or S-V ideo/Audio jack V iewing camcorder tapes Connect the Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR. (Note: For better video, use an S-Video cable.) • Please be sure to match the color coded input termina[...]

English-6 • Please be sure to match the color coded input terminals and cable jacks. Connecting a DVD Player (480i, 480p) Playing DVD TV Audio cable Component cable DVD Player Power cord 1 Connect the Y , P B , P R (COMPONENT1, 2) input jacks on the TV to the Y , P B , P R output jacks on the DVD player using a component cable. 2 Connect the AUDI[...]

English-7 • Please be sure to match the color coded input terminals and cable jacks. 1 Connect the cable or antenna to the antenna input jack on the DTV . 2 Connect the Y , P B , P R (COMPONENT1, 2) or HDMI input jack on the TV to the Y , P B , P R or DVI output jacks on the DTV receiver using a component or HDMI/DVI cable. 3 Connect the AUDIO L/[...]

English-8 Connecting to HDMI (High Definition Multimedia Interface) (480p, 720p, 1080i) W atching DTV • Please make sure the HDMI source’s power is on before selecting HDMI from the “Source List” on the TV . 1 Connect the cable or antenna to the antenna input jack on the DTV . 2 Connect the HDMI input jack on the TV with the HDMI output jac[...]

English-9 Connecting a Digital Audio System 1 If your audio system has a coaxial digital audio input, connect to the “COAXIAL” output jack on the TV . 2 If your audio system has a optical digital audio input, connect to the “OPTICAL“ output jack on the TV . Be certain to remove the black cover from the optical output before inserting the ca[...]

English-10 Connecting to an Analog Amplifier 1 The “AUDIO OUT (AUDIO L/R)” terminals cannot be used for external speakers. Y ou must hook them up to an amplifier . When an audio amplifier is connected to the “AUDIO OUT (AUDIO L/R)” terminals: Decrease the gain (volume) of the audio amplifier , and adjust the volume level with the volume con[...]

English-11 Remote Control Buttons Œ POWER button T urns the TV on and of f. ´ GUIDE button Press to display the on-screen Electronic Program Guide (EPG). ˇ ANTENNA button Press to select “Air” or “Cable”. ¨ Number buttons ˆ - button Press to select additional channels (digital and analog) being broadcast by the same station. For exampl[...]

English-12 T urning the TV On and Off Press the POWER button on the remote control. The TV will be turned on and you will be able to use its features. Y ou can also use the Power button on the front of the TV . V iewing the Menus and Displays Y our TV has a simple, easy-to-use menu system that appears on the TV screen. This system makes it convenie[...]

English-13 Memorizing the Channels Y our TV can memorize and store all of the available channels for both “of f-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps f[...]

English-14 • STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory” on page 43 of the instruction manual. When selecting Cable TV system : [...]

English-15 Storing Channels in Memory 4 Press the ▲ or ▼ button to select the antennas to memorize. Press the ENTER button to select “Start”. 5 In Air , press the ENTER button to start the auto program. In Cable or Air + Cable, press the ENTER button to select the cable system. Press the ▲ or ▼ button to select “Digital Channel or Ana[...]

English-16 T roubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply , then call your nearest service center . 3 Press the ▲ or ▼ button to select signal source, then press the ENTER button. 4 Press the MENU button to exit. Problem Poor picture. No pic[...]