Samsung SSA-S1000 инструкция обслуживания

Standalone RFID Access Controller user manual SSA-S1000 imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please visit our website. www.samsungsecurity.com[...]

2_ Safety information safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this u[...]

PRODUCT INTRODUCTION English 3 SAFETY INFORMATION Keep out of direct sunlight and heat radiation sources. It may cause fi re. Install it in a place with good ventilation. Avoid aiming the controller directly towards extremely bright objects such as sun. Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, s[...]

contents PRODUCT INTRODUCTION 5 5 Feature 6 What’s included 7 At a Glance 8 Cable Color Scheme 8 Cable Selection INSTALLATION AND EXTERNAL CONNECTION 9 9 Installation 9 Bypass Diode Connection 10 I/O Connection SYSTEM INITIALIZATION & BASIC OPERATIONS 12 12 Initializing the system by short-circuiting 12 Basic Operations 13 To register /delete[...]

English 5 PRODUCT INTRODUCTION FEATURE This product is designed for use with one-door access control for security applications. With its compact design, you can install this product on the wall or a doorframe; Its epoxy molding guarantees stable operation in a challenging environment. This product enables you to control the door using the user card[...]

6_ Product Introduction product introduction WHAT’S INCLUDED Check if the following items are included in the product package. tGj Main Module Bezel Master Card (x1) Keytag (x5) xGn 3.5 x 40mm Screws (x2) 3.5 x 25mm Screws (x2) 6 x 30mm Plastic Anchors (x2) Diode (X 2) (UF4004, 1N4001~4007) Quick Gu[...]

English 7 PRODUCT INTRODUCTION AT A GLANCE Front/Rear 1 LED Displays the system operation status using red and green indicators. 2 Fixing Hole Fixing hole for wall-mounting. 3 Connection Cable Used to connect to the power or I/O cable. 4 Program Port Port used to upgrade the fi rmware. 5 Buzzer Piezo buzzer. 5 4 3[...]

8_ Product Introduction product introduction CABLE COLOR SCHEME Item Cable Color Signal Line Description Power Red DC+12V +12V supplied Black GND Earth-Grounding for Power Input Yellow AUX INPUT#1 Select a Lock Type Blue Door Contact Sensor Door Sensor Connection Port Green Exit Button Exit Button Connection Port Output Purple Alarm Out Alarm Devic[...]

English 9 INSTALLATION AND EXTERNAL CONNECTION installation and external connection INSTALLATION - On a doorframe or the wall Drill a 1/2-inch (12.7 mm) hole onto the center of the doorframe or the wall where SSA-S1000 is installed, which makes room for the cable of the reader module. Drill two 0.3-inch (7.62 mm) holes: one on the point of 0.39 inc[...]

10_ Installation and External Connection installation and external connection I/O CONNECTION Input Connection - To connect the power supply unit Connect the DC+12V to the red line. Connect GND to the black line. - To connect the Door Contact Sensor Connect the COM port of the sensor to the blue line. Connect the NO port of the sensor with the GND l[...]

English 11 INSTALLATION AND EXTERNAL CONNECTION Output Connection - To connect the power supply unit Connect the DC+12V to the red line. Connect GND to the black line. - To connect the door lock device Connect the plus(+) line of the lock device to DC+12V. Connect the minus(-) line of the lock device to the white line. - To connect the alarm device[...]

12_ System Initialization & Basic Operations system initialization & basic operations INITIALIZING THE SYSTEM BY SHORT-CIRCUITING Turn off the product and short-circuit three lines: white line of the door lock device, green line of the Exit button, and yellow line of the lock type. When you turn the product back on, all of the LED indicator[...]

English 13 SYSTEM INITIALIZATION & BASIC OPERATIONS TO REGISTER /DELETE MASTER ID First turn off the product, and short-circuit two lines: purple line of Alarm Out and blue line of the Door Contact Sensor. When you turn the product back on, you will hear the beep twice while all of the LED indicators turn red, and repeat turning on/off twice be[...]

14_ troubleshooting troubleshooting TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. If the trouble persists, please contact the SAMSUNG Customer Service near you. PROBLEM SOLUTION The user card is not deleted. 1) Check if the product works properly. - If the product works properly and you have t[...]

English 15 PRODUCT SPECIFICATION product specifi cations PRODUCT SPECIFICATIONS Item SSA-S1000 Users 512 Users Power / Current DC 12V / Max.110mA Reading Time (Card) 30ms Door Open Time 5sec. (Fixed) Input Port 3ea: Exit Button, Door Sensor, Lock Type Select [Power fail Safe / Power Fail Secure] Output Port 2ea : TR Output / DC 12V. Rating Max. 30[...]

AB82-02558A Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where mar[...]