Samsung SyncMaster 244T инструкция обслуживания

SyncMaster 244T[...]

Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and unde rstand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of ti me, set your computer to D[...]

Do not use a damaged or loose plug. z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. z An improper ground may cause electr ic shock or equipment damage. Insert the power plug firmly so that[...]

Do not drop the monitor when moving it. z This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. z Dropping the product may cause dam age to the product or personal injury. Do not place the product on an unstable or small surface a[...]

Do not place the monitor face down. z The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. z Installation by unqualified personnel may result in injury. z Always use the mounting device spec ified in the owner's manual. When installing the product, make sure to keep it away from the wall (more[...]

Unplug the power cord from the powe r outlet and wipe the product using a soft, dry cloth. z Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the Service Center or Customer Center for interior cleaning once a year. z Keep the product's interior clean. Du st which has [...]

Do not try to move the monitor by pulling only the wire or the signal cable. z This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or le ft by pulling only the wire or the signal cable. z This may cause a breakdown, electric shock or fire due to damage to the cable. Do not cover the vents on [...]

Adjust the resolution and frequen cy to the levels appropriate for the model. z Inappropriate resolution may c ause undesirable picture quality. 24 inch (60cm) - 1920 X 1200 @ 60 Hz Watching the monitor continuously at a too close angle may result in eyesight damage. To ease eye strain, take at least a fi ve-minute break after every hour of using t[...]

Please make sure the following items are included with your monitor. If any items are missing, contact your dealer . Contact a local dealer to bu y optional items. Unpacking Monitor Stand t y pe A[...]

Stand t y pe B Manual Quick Setup Guide Warranty Card (Not available in all locations) User's Guide, Monitor Driver, Natural Color, MagicTune™, Ma g icRotation software Cable D-sub Cable Power Cord DVI Cable USB Cable ( A-B T y pe cable ) Component Cable Sold separatel y S-Video Cable Video Cable[...]

Screws ( 4EA ) Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. Adjust buttons [ ] These buttons allow you to adjust items in the menu. Analog/Digital(PC) : MagicBright™ button [] MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image [...]

For working with a mixture of images such as text and graphics. 4) Text : Normal brightness For documentations or works involving heavy text. >>Click here to see an animation clip Digital(DVD)/Video /S-Video/Component : Mode button The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie" an[...]

(The configuration at the back of the m onitor may vary from product to product.) Kensington Lock : The Kensington lock is a dev ice used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, co ntact where you purchase it. DVI IN (Source List : Digital) : Conn[...]

VIDEO (Source List : Video) : External device (video) input terminal S-VIDEO (Source List : S-Video) : External device (S-video) input terminal COMPONENT IN (Source List : Component) z Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the Y, P B ,P R input ports using a component video cable ( Y, P B ,P R ). POWER S/W : Switch the monitor [...]

Connecting the Monitor 1. Connect the power cord for your monitor to the POWER IN on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, RGB IN port on the back of your monitor. 2-2. Using the DVI (Digital) connector on [...]

Cable Fix Ring. Connecting to Other devices This monitor allows the user to connect it to such input devices as a DVD player, a VCR or a camcorder without disconnecting the PC. The configuration at the back of the moni tor may vary from product to product. This product does not have speakers. To listen to audio, connect the audi o cable to another [...]

1. Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using the DVI cable. 2. Then, start the DVD with a DVD disc inserted. 3. Select Digital using the SOURCE button . 3. Connecting DVD/DTV Set Top Box Connect to the DVD/DTVSet Top Box input if the device has a DVD/DTV connector. You can watch Component simply by [...]

The USB port of the monitor supports High-Speed Certified USB 2.0. High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1.5 Mbps Power Consumption 2.5W (Max., each port) 2.5W (Max., each port) 2.5W (Max., each port) 1. Connect the UP port of the monitor and the USB port of the computer with the USB cable. 2. Connect the DOWN port of the USB m[...]

z When connecting a device to the DO WN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the corresponding product.) z The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the co[...]

Using (c) , you can adjust the height. You can adjust the tilt within a range of -5 ~ 15 degrees. Using (d) , you can horizontally rotate it within a range of -30 ~ 30 degrees. Stand type B Pivot Stand Using (a) , you can rotate the screen with in a range of 0 ~ 90 degrees. Using (b) , you can use the screen lengthwise. Press the top side of the st[...]

Tilt angle Using (c) , you can adjust the height. You can adjust the tilt withi n a range of 0 ~ 25 degrees. Using (d) , you can horizontally rotate it within a range of -45 ~ 45 degrees. Removin g the base 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect th[...]

A. Monitor B. Mounting interface pad (sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface Pad with the holes in the rear cover mou[...]

4. Click the "Install" button in the "Warning" window. 5. Monitor driver installation is completed. Windows XP/2000 1. Insert CD into the CD-ROM drive. 2. Click "Windows XP/2000 Driver" 3. Choose your monitor model in the model list, then click the "OK" button. 4. If you can see following message window, then[...]

Installing the Monitor Driver (Manual) Windows XP | Windows 2000 | Windows Me | Windows NT | Linux When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you [...]

5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Have disk ". 7. Click the " Browse " button then choose A:(D:Driver) and choose your monitor model in t[...]

10. Monitor driver installation is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not F ound" on your monitor, follow these steps. 1. Choose " OK " button on the " Insert disk " window. 2. Click the " Browse " button on the " File Needed " window. 3. Cho[...]

Microsoft ® Windows ® NT Operating System 1. Click Start , Settings , Control Panel , and then double-click Display icon. 2. In Display Registration Information wi ndow, click Settings Tab and then click All Display Modes . 3. Select a mode that you wish to use (Resoluti on, Number of colors and Vertical frequency) and then click OK . 4. Click Ap[...]

How to install the Natural Color software Insert the CD included with the Samsung monitor into the CD-ROM Drive. Then, the initial screen of the program Natural Color will be exec uted. Click Natural Color on the initial screen to install the Natural Color software. To install the program manually, insert the CD included with the Samsun g monitor i[...]

MENU Use this button for open the on-scr een menu and exits from the menu screen or closes screen adjustment menu. Analog/Digital(PC) : MagicBright™ MagicBright™ is a new feature prov iding the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle thro ugh available preconfigured m[...]

AUTO : Available in Analog mode only Menu Description AUTO When the ' AUTO ' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Press to self-adjust to the inco ming Analog signal. The values of fine,coarse and position are adjusted automatically. (Available in Analog mode only) To make th[...]

Menu Description Play/Stop Locked After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). Even if you use the OSD adjustmen t lock function, you can still adjust MagicBright™/Mode and Bri ghtness and Contrast of the monitor. MENU AUTO/PIP Menu Description Play/Stop Analog/Digital(PC) : MagicBright™ Magi[...]

MagicBright™ / Mode Then push button again to circle through available preconfigured modes. ( Custom → Entertain → Internet → Text ) Digital(DVD)/Video/S-Video/Component : Mode The Monitor has four automatic picture settings that are preset at the factory. Then push button again to circle through available preconfigured modes. ( Dynamic →[...]

Menu Description SOURCE Selects the input signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper left of the sc reen displaying the current mode -- Analog, Digital, Video, S-Video and Component input signal.) Note : Changing the source is allowed only in external devices that are con[...]

Input Menu Description Play/Stop Source List Use to select PC or other external input sources connected to the Monitor. Use to select the screen of your choice. 1) Analog 2) Digital 3) Video 4) S-Video 5) Component Edit Name Name the input device connected to the input jacks to make your input sour ce selection easier. 1) Analog 2) Digital 3) Video[...]

Menu Description Play/Stop MagicBright™ MagicBright™ is a new feat ure providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Text, Internet, Entertain and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four set[...]

2) Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). 3) Sharpness : Adjust the Sharpness. 4) H-Position : Adjusts the screen location horizontally. 5) V-Position : Adjusts the screen location vertically. H-Position V-Position Auto Adjustment The valu[...]

Menu Description Play/Stop Mode The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select "Custom" which automatically recalls your personalized picture set[...]

Picture (Video/S -Video/Component) Menu Description Play/Stop Mode The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select "Custom" which automatically re[...]

Film Mode experience. In Component mode, film mode is only available for 480i and 576i input. MagicColor Pro Menu Description Play/Stop MagicColor Implements the natural color chroma according to the display screen. Automatically adjusts to the display screen. Can improve the skin tones. 1) Off 2) Intelligent Enhance natural color except skin tone.[...]

6-Color - The 6-Color function is only available when the Color Weakness function is turned Off. 1) Saturation Adjusts the color saturation. 2) Hue Adjusts the color tones. 3) Reset Returns to the original screen mode. Saturation Hue Reset Color Weakness Enables those with color weakness to view the screen as easily as those with normal vision. 1) [...]

Position / / / Setup Menu Description Play/Stop Language You can choose one of 11 languages. Transparency Changes the opaqueness of the background of the OSD. 1) High 2) Medium 3) Low 4) Opaque Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces t he noisy picture background. If you wish to co[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Overview What is MagicTune™? Monitor performance can vary due to the graphics card, host computer lighting conditions and other environmental factors. In order to ge t the best image on a monitor requires you to adjust it for your unique setting. Unfortunately, t[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Installation 1. Insert the installation CD into the CD-ROM drive. 2. Click the MagicTune™ installation file. 3. Select installation Language, Click "Next". 4. When the InstallationSh ield Wizard window a ppears, click "Next." 5. Select "I[...]

6. Choose a folder to instal l the MagicTune program. 7. Click "Install." 8. The "Installation Status" window appears.[...]

9. Click "Finish." 10. When the installation is comp lete, the MagicTune executable ic on appears on your desktop. Double-click the icon to start the program. Installation Problems The installation of MagicTune™ can be affected by such factors as the vi deo card, motherboard and the network environment. See "Troubleshooting" i[...]

OS z Windows™ 98 SE z Windows™ Me z Windows™ 2000 z Windows™ XP Home Edition z Windows™ XP Professional Hardware z 32MB Memory above z 25MB Hard disk space above * For more information, visit the MagicTune website . It is recommended using MagicT une in Windows™ 2000 or later.[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting OSD Mode The OSD mode makes the adjustme nt of settings on all monitors easy. When selected , each tab on top of the control window displays the general descriptions of the sub-me nu items for adjustment. When selected, each tab displays a list of menus. For quick [...]

Color Tab Definition Adjusts the "warmth" of the monito r background or image color. 4. Custom: Although the valu es are carefully chosen by our engineers, the pre- confi g ured values may not be comfor table to your eyes dependin g on your taste. If this is the case, adjust the Brightness and Contrast by using the OSD menu. MagicColor an[...]

Image Tab Definition Adjusts the Fine , Coarse and Position values. Option Tab Definition You can configure MagicTune u sing the following options. 6-Color well as pictures taken by a digital camera or scanner through Windows. z Saturation - To ad just the chroma. z Hue - To adjust the color tone. z Reset - To reset the monitor setti ngs to the fac[...]

Support Tab Definition Shows the Asset ID and the version number of the program, and al lows you to use the Help feature. Help Visit the MagicTune website or click to open the Help files (User Manual) if you need any help installing or running MagicTune. The User Manual opens within a basic browser window. Asset ID You can use the server to control[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstal l | Troubleshooting Color Calibration 1. Color Calibration Color Calibration guides you to get opti mal color condition for your monitor. Proceed followin g 5step s for ge tting op timal mon itor col or condit ion . 1. Control "Brightness control bar" for matching t he brig[...]

2. Press "View Uncalibrated" button to see the original image.[...]

Overview | Installation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Uninstall The MagicTune™ program can be removed only by us ing the "Add or Remove Programs " option of the Windows™ Control Panel. Perform the following steps remove MagicTune™. 1. Go to [Task Tray] ' [Start] ' [Settings] and select [Contr[...]

Overview | Inst allation | OSD Mode | Color Calibration | Uninstall | Troubleshooting Troubleshooting The current computing system is no t compatible with MagicTune. Please press OK and cli ck on the "Shortcut to the MagicTun e site" to view our home page for further reference. An error may occur when your video/graphic card is not in the[...]

Visit the video card maker's homepage and dow nload and install the latest driver. For more information about the video card, contact the card manufacturer. To ensure normal operation, please restart your system. An error occurs when the system is not restarted after installing MagicTune. (This is for Win98SE and WinMe only.) Restart the syste[...]

z Visit the MagicTune website for technical support fo r MagicTune, FAQs (questions and answers) and software upgrades. z Visit the MagicTune website and download the installation software for MagicTune MAC. the graphic card, visit ou r website to check the compatible graphic card list provided. http://www.samsung.com/monitor/magictune MagicTune™[...]

Overview | Installation | Interface | Uninstall | Troubleshoo ting Overview What is Magi cRotation? Traditionally, computer displays allowed the user to view only in landscape mode. In today's information age, more users need to view do cuments, web pages, emails, etc. in there day to day life. These types of applications ca n be better viewed[...]

Overview | Installation | Interface | Uninstall | Troubleshooting Installation 1. Insert the install ation CD into the CD-ROM drive. 2. Click th e Magic Rotation installa tion fil e. 3. Select installation Language, Click "Next". 4. When the InstallShiel d Wizard window appears, click "Next." 5. Select "I agree to the term [...]

6. Choose a folder to install the MagicRotation program. 7. Click "Install." 8. The "Installation Status" window appears.[...]

9. Click "Finish." Have to reboot the system in order fo r the MagicRotation to work properly. 10. When th e instal lation is complete, t he Magic Rotat ion executable icon appears on your desktop. Installation Problems The installation of MagicRotation can be affected by the factors such as vide o card, motherboard and the network enviro[...]

{ Close the application. { Select the Orientation (90, 180, 270) you want to view the application. { Relaunch the application. In most cases this should fix the problem. 3. User Applications using OpenGL and DirectDraw (3D drawing) will not function as per the orie ntation mode selected (90, 180, 270 ). e.g. 3D games 4. DOS bas ed appli cations in [...]

Ov ervi ew | Ins t al la t io n | Interfa c e | Un ins ta ll | Troubleshooting z When Rotation is functioning, portion of MagicTune™ pro gram may not op erate nor mally . z Au toRotatio n : Th e sc reens display will automat ically rota te when the moni tor is rotate d. To exec ute Au to Ro tati on, i t s houl d b e done as be low. z P lease ins [...]

Rota te to 90 : Dis p lay will be rot ate d 90 de gr ees fr om th e cu rr en t ang le . Rota te to 180 : Di splay wi ll be rot ated 180 d egrees from the curren t angl e.[...]

Rota te to 270 : Di splay wi ll be rot ated 270 d egrees from the curren t angl e. Hot k ey : H ot Keys are availab le by d efault and c an be ch anged b y user. It can be assigned by user di rectly with k eyboard after chan ging the exi sting HotKey . User can create th e hot key with the comb ination of Shift, Ctrl , Alt and gene ral k eys. I n c[...]

[...]

Overview | Installation | Interface | Uninstall | Troubleshooting Uninstall The MagicRotation program can be removed only by using the "Add/Remove Prog rams" option of the Windows™ Control Panel. Perform the following steps to remove MagicRotation. 1. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the m[...]

Overview | Installation | Interface | Uninstall | Trou bleshoot ing Troubleshooting Before You Call Technical Support z MagicRotatio n Software works wi th the install ed "Display Driver" supplied by your Graphic Card Vendor to provide screen rotation capabilities. If the installed "Display Driver" is working incorrectly or has [...]

Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact y our deale r . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connected properly? Chec[...]

There is no image on the screen. Is the Power indicator on the monitor blinking at 1 second intervals? The monitor is in PowerSaver mode. Press any key on the keyboard to activate the monitor and restore the image on the screen. If there is still no image, press the ' SOURCE ' button. Then press any key on the keyboard again to activate t[...]

DDC) function can be supported. Check when MagicTune™ does not function properly. MagicTune™ feature is found only on PC (VGA) with Window OS that supports Plug and Play. * To check whether your PC is available for MagicTune™ feature, follow the steps below (When Windows is XP); Control Panel -> Performance and Maintenance - > System -&[...]

Do not allow any water to go inside the monitor. Self-Test Feature Check Self-Test Feature Check | Warnin g Messa g es | Environment | Useful Tips Y our monitor provides a self test feature that allows you to check whether your monitor is functioning properly. 1. Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the [...]

then contact the Service C enter or your dealer. z Judging the monitor' s working condition If there is no image on the screen or a "Not Optimum Mode","Recommended Mode : 1920 X 1200 60Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on. { If there is a message coming up on the[...]

General AC 100 ~ 240 VAC(±10%), 60/50 Hz ± 3Hz Signal Cable General Model Name SyncM a st e r 24 4 T LCD Panel Size 24.3" Diagonal (6 1cm) Display are a 518 mm (H) x 324 mm (V) Pixel Pitch 0.270 mm (H) x 0.270 mm (V) Type a-Si / PVA Synchronization Horizontal 30 ~ 94 kHz (Analog) 30 ~ 81 kHz (Digital) Vertical 56 ~ 75 Hz (Analog/Digital) Dis[...]

15pin-to-15pin D-sub c able, detachable, 1.8 m DVI-D to DVI-D connector, detachable, 2.0 m Power Consumption Less than 100 W(Analog/Digital) Dimensions (WxDxH)/ We ight : Stand type A 560.4 x 247.1 x 443.5 mm (22.1 x 9.7 x 17.5 inch ) / 9.45 kg (state of stand installed) Dimensions (WxDxH)/ We ight : Stand type B 560.4 x 255 x 506 mm (22.1 x 10.0 x[...]

Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video ca rd manual and adjust the screen as follows. Table 1. Preset Timing Modes Display Mode Ho[...]

Like a fluorescent lamp, the scr een has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called Vertical Frequency or Refresh Rate. Unit: Hz[...]

Contact SAMSUNG WORLD WIDE If you have any questions or c omments relating to Sams ung products, ple ase contact the SAMSUNG customer care center. North Americ a CANADA 1-800-SAMSUNG (7267864) http: //www.samsung.com/ca MEXIC O 01-800-SAMSUNG (7267864) http://www.samsung.com/mx U.S.A 1-800-SAMSUNG (7267864) htt p://www.samsung.com Latin America ARG[...]

BELGIUM 02 201 2418 http://www.samsung.com/be CZECH REPUBLIC 844 000 844 http: //www.samsung.com/cz DENMARK 38 322 887 http://www.samsung.com/dk FINLAND 09 693 79 554 http://www.samsung.com/fi FRANCE 08 25 08 65 65 (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805 - 121213 ( € 0,12/Min) http://www.samsung.de HUNGARY 06 40 985 985 http://www.[...]

Tel: 01-55-5747 -5100 / 01-800 -726-7864 EXPORTADO POR: Samsung Electronics CO.,LTD. 416, Mae tan-3dong , Yeongtong - gu, Suwon City, G yeonggi-do Korea MÉXICO IMPORTADO POR: SAMSUNG ELECTRON ICS MÉXICO. S.A. de C.V. Vía Lopez Portillo No. 6, Col. San Fco . Chilpan Tultitlán, Estado de México, C.P. 54940[...]

Terms Dot Pitch The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per se cond in order to create and display an image for the user. Th[...]

camcorders and DVD players, separate from a TV broadcast. DVD A type of digital disk technology that takes up only the benefits of CD and LD, to implement a high resolution/quality, which enables the user to enjoy clearer images. For Better Display 1. Adjust computer resolution and screen injecti on rate (refresh rate) oncomputer as described below[...]

PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n when switching from one image to anothe r especially after displaying a statio na ry image for a long time. This guide is to demonstrate correct usag e of LC D products in order to protect them from Image retention. Warrant y Warranty does not cover any dama [...]

Ex) The best way to prote ct yo ur monitor from Ima g e retention is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is operate d un der normal conditions. Normal conditions are defined as con tinuously changing vi deo patterns. When the LCD panel is oper[...]

Correct Disposal of This Product (Waste Electrical & E lectronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection s ystems) This marki ng shown on t he product or its literature, in dicates that i t should not be disposed w ith other hous ehold wastes at the end of it s working li [...]