Samsung TC190 инструкция обслуживания

SyncMaster TC190, TC240 L C D MONITOR quick start guide[...]

1 Installing the Product 1 -1 Package Contents • Unpack the product and check if all of the following contents have been includ ed. • Store the packaging box in case you need to move the Product at a later stage. Monitor 1 -2 Installing the Stand Before assemb ling the product, pla ce the product down on a flat and stable surface so that th e s[...]

Place a soft cloth over the table to prot ect the product and place the product onto the cloth so that the front of the product is facing downwards. Do not remove the stopper pin before installing the base. Hold the main body of the product with your hand as shown by the figure. Insert the stand base into the stand co nnection part in the di rectio[...]

Disassembly is in the reverse order of assembly. 1 -3 Installing a Wall Mount Before install ation, disasse mble the produc t according to the fol lowing steps. After the installati on of the base, stand the monitor up as shown in the figure. Now you can remove the stopper pin to adjust the stand. - Caution Avoid lifting the pro duct holding only t[...]

This product provides a wall mount of 100 mm x 100 mm(2 00 mm x 100 mm) that complie s with the VESA specifications. 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel an d place the product face do wn. 3. Separate the stand. 4. Align the groove of the Mon [...]

•If you use a screw that is longer than the standard s pecifications, the in side of the product may be d amaged. •For wall mounts that are not compatible with the standard VESA specific ations, the length of the screw may differ depending on the corresponding specifications. •Do not use screws that are incompatible with the standard VESA spe[...]

1 -5 Connecting Power Connect one end of the power cord to the POWER port of the pro duct and connect the other end of the power cord to a 220V or 110V wall outlet. (The input voltage is switched automati cally.)[...]

1 -6 Connecting to a nother Monitor Connect between the [VIDEO OUT] port on the product and the D-Sub port on your monitor using a D-Sub cable. Connect to the [VIDEO OUT ] port to display the same picture on another monitor . (For presentati on purposes)[...]

1 -7 Connecting a SERIAL Cable Devices which support R S-232C connection (inte rface) can be connected.[...]

1 -8 Connecting to your Printer Devices which support D -SUB 25-pin connection (interface) can be connected .[...]

1 -9 Connecting with a PC Connect the [RGB IN] p ort of the product to the [D-Sub] port of your PC with a D-Sub cable. Use the [RGB IN] port to directly connect the monitor to a PC.[...]

1 -10 Connecting a Stereo Cable Connect the [AUDIO IN] port on the rear side of the monitor to the sound ca rd of the PC.[...]

1 -11 Connecting USB The USB port of the monitor sup ports Full-Speed Certified USB 2.0. Connect USB devices such as a mouse, keyboard and external storage devices (DSC (Digi tal Still Camera), MP3, external storage, etc.). You can use a USB device such as a mouse, keyboard, Memory St ick, or external hard disk drive by co nnecting them to the USB [...]

1 -12 Connecting Headphones Connect your headphone s to the Headphone conne ction terminal. You may connect your headphones to the monitor.[...]

1 -13 Connecting MIC Connect the microphone cable to the MIC port on the monitor. You may connect your microphone to the monitor.[...]

1 -14 Kensington Lock A Kensington Lock is an anti-the ft device that enables users to lock the pro duct so that they can safely use it in public locat ions. Since the shape and usag e of the locking device may d iffer depending on the model and the man ufacturer, for more information, refer to the User Manual supplie d with the locking device. You[...]

2 Troubleshooting 2 -1 Monitor Self-Diagnosis • You can check if the pro duct is working pr operly using the Self-Diagnosis function. • If a blank screen is d isplayed and the Power LED blinks even if the prod uct and the PC are prope rly connected, perform the self-diagnosis function accord ing to the procedures below. 1. Turn the product and [...]

The display area suddenly move s to an edge or to the center. Did you change the graphics card or the driver? Pleas e press the [AUTO] button to run the auto ad justment function. Did you change the resolution and frequen cy appropriate to the product? Set the resolution and the frequency to the ap propriate values in the graphics card Refer to the[...]

2 -3 FAQ FAQ! Please try the following! How can I change the frequency of the video signal? You have to change the freque ncy of the graphics card. (For more information , refer t o the User Manual of the com- puter or the graphics card.) How can I change the resolution? Windows XP : Change the resolution by selectin g Control Panel → Appearance [...]