Sanyo DSR-3009P инструкция обслуживания

Digital Video Recorder with Multiplexer Function DSR-3016P DSR-3009P DSR-3016P DSR-3009P Instruction Manual English GB Bedienungsa nleitung Deu tsch D Manuel d’instruct ions Français F Manual de Inst rucciones Espa ñol E Manuale di Istr uzioni Italiano I About this man ual • Before installing and using thi s unit, please read this manual care[...]

PRECAUTION WARNING: TO REDUCE THE RISK OF FIRE OR ELEC TRI C SHOC K, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE. To avoid electric al shock, do not open the cabinet. Refer servicing to qualifi ed personnel only. If the power supply cord (AC power cord) of this appliance is damaged, it must be r eplaced. Return to a SANYO Authoris ed Ser[...]

CONTENTS MAIN FE ATUR ES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PAR T NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 CONN ECTI ONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Basic[...]

MAIN FEATURES This digital video recorder can be used to store images recorded by a monitoring camera onto its built-in hard disk. This digital video recorder can display images that are being recorded by a camera in a spl it-screen (16, 9, 4), and it can also display images that have already been recorded in a split-screen. The DSR-3009P model spl[...]

ACCESSORIES Power cord Fixer power cord tie Ferrite core x 3 Hard disk pr otection If any hard disk format errors are found when the power i s turned on, the whol e hard disk is checked automatically. If any further problems are found with the hard disk, t he POWER indicator flashes. Please contact the place of purchase if you need to reformat the [...]

PART NAMES Front panel 1 POWE R indicat or • Illuminates (red) when the power cord plug is inserted into a wall o utlet . • Flashes when there i s a problem with the internal hard disk or fan. 2 FULL in dicat or Flashes when overwriting i s set to off and the rem aining space in the normal recording area of the hard disk drops to 1%* . In addit[...]

PART NAMES G MENU but ton and in dicat or Used to display the menu screens (setting screens). H ZOO M button and in dicator Used to display the zoom screen in a single screen during image monitoring or playback. The indicator flashes when t he zoom screen is displ ayed. I Automatic camera sw i tching button and indi cator (SEQUENCE) This button is [...]

PART NAMES Rear panel 1 PC card slot Connect a network card or SCSI card (sold separately) here. Note: The PC card slot is for 16-bit 5 V cards onl y. Do not use 32-bit card bus types of card, as they may damage the PC card sl ot of the digital video recorder. 2 AUDIO IN terminal 3 AUDIO OUT terminal 4 MIC IN te rminal 5 VIDEO IN ter minal The DSR-[...]

CONNECTIONS Turn off the power f or all components before connecting them. Be sure to carefully read t he Instruction Manual for all equipment being connected to t he digital video recorder. If the connections are incorrect, smoke or operating m alfunctions may result. Basic connections (DSR-3016P model) Nine cameras can be connect ed to the DSR-30[...]

CONNECTIONS Digital series connections System control connections Use the RS485 connector to connect a system controller (sold separately) to the digital video recorder. After connecting the sy stem controller, you will need to carry out the settings that are given i n the RS-232C/RS-485 SE T menu. (See page 76. ) A When using the RS485 (RJ-11) con[...]

CONNECTIONS Externa l alarm sensor setup In order to make an external alarm sensor operate, an external switch must be connected to an ALARM IN connector. W hen an intruder activates the external switch (such as by opening a door), an al arm signal is received and an alarm can be made to sound. The DSR-3009P model uses the connectors m arked *. Usi[...]

BUILT-IN HARD DISK Hard disk Recording areas The recording areas on the hard disk (normal recordi ng area: 80%, alarm recording area: 19%, archi ve area: 1%) are established automatically when the power for t he digital video recorder is turned on. Images are recorded i n the normal recording area when the REC/STOP button is pressed, and they are r[...]

BUILT-IN HARD DISK Recording speed tables (The recording time may vary depending on the images being recorded. ) These recording speed tables show t he recording times for various pi cture quality and frame/field sett ings when recording in th e normal recording area of the hard di sk (80 GB). T hey do not include audio recordi ng settings. The rec[...]

BUILT-IN HARD DISK When the power for the digital video recorder is turned on, the operating display appears at the top of the monitor screen. Thi s operating display shows information which is essential f or operation, such as t he date, time and picture quality. Oper ating displ ay ☞ Insert the power cord into a wall outlet and turn on the powe[...]

VIEWING CAMERA IMAGES Viewing a si ngle-scre en image Setting the camera image to single-screen display 1 Press a camera select button (example: 2). The camera 2 im age appears as a single-screen. Pausing ima ges 1 Press th e STILL button. The image will be paused. 2 To cancel th e stil l image, press the STILL button once mo re. Pausing will be ca[...]

VIEWING CAMERA IMAGE S 2 To return an enlarged image to normal image display, pr ess the ZO OM butto n once more. The zoom will be cancel ed and norm al images will appear. Example: T o zoom in on the camera 2 image and move the zoom frame You can select the zoom position by means of t he zoom frame which appears on the screen. T he zoom frame is s[...]

VIEWING CAMERA IMAGE S Viewing mult iple-screen imag es Images from the cameras that are connect ed to the digital video recorder can be displayed in several split-screen formats. Furt her mor e, the images from each camera can be displayed in any position withi n the split screen. (See page 81. ) Viewing images as 9-screen or 16-screen displays 1 [...]

VIEWING CAMERA IMAGE S Example: T o display images from camera 2 in the plus screen Record the images on t he hard disk beforehand. (See page 20. ) 1 Press the P LAY/STOP button . All screens will st art playing back. 2 Press the P LUS butto n. The plus screen is displayed. 3 Press the P LUS butto n once mo re. The plus screen continues to show the[...]

VIEWING CAMERA IMAGE S Automatically switching of the 4-screen images 1 Press the Q UAD button. Images appear as a 4-screen display. 2 Press the S EQUENCE b u tton. Camera images will be switched automatically in 4-screen display units (1 – 4, 5 – 8, 9 – 12, 13 – 16). For the DSR-3009P model, images from cam eras 1 – 4, 5 – 8, or 9 – [...]

VIEWING CAMERA IMAGE S Using two monitors for monitoring If you connect a m onitor to the MON2 output terminal on the rear panel, you can display the images f rom each camera as single-screen images or show an automatic switching screen on monitor 2, even while t he main monitor is showing a spl it-screen display. In addition, th e camera images ca[...]

RECORDING IMAGES IN THE NORMAL RECORDING AREA Norm al rec ordin g Images can be recorded i n the normal recording area whi l e they are bei ng monitored. If the time has not been set, the digital video recorder cannot make recordings. Be sure to set the t ime. (See page 44.) 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET[...]

RECORDING IMAGES IN THE NORMAL RE CORDING AREA Timer re cording The monitored images can be recorded automatically by setting start and end times for each day of the week. 1 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and t ime. After the setting has been made, press the EXIT/ OSD button, the da[...]

RECORDING IMAGES IN THE ALARM RECORDING AREA Alarm re cording 1 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and t ime. After the setting has been made, press the EXIT/ OSD button, the date and time appear i n the operating display. (See page 44.) 2 Set alarm reco rding. • Press the MENU button[...]

RECORDING IMAGES IN THE ALARM RECORDING AREA Pre- alarm re cording 1 Setting the time Press the MENU button to display the LANGUAGE/CLOCK SET menu, and set the date and t ime. After the setting has been made, press the EXIT/ OSD button, the date and time appear i n the operating display. (See page 44.) 2 Set pre-alarm recor ding. Press the MENU but[...]

PLAYING BACK RECORDED IMAGES The digital video recorder can play back recorded images in the normal recording area (normal recording, timer recording). Playback operations PLAY/STOP ALARM STILL ZOOM SHUTTLE HOLD SHUTTLE HOLD b Skipping to the previous or next alarm b Still image (See page 26.) b Zooming images (See page 26.) b b b Frame advance (fo[...]

PLAYING BACK RECORDED IMAGES Playba ck in a single scre en 1 Press the P LAY/STOP button . c appears in the operating di splay and the images recorded in t he normal recording area are played back. You can press the camera sel ect buttons to sele ct the camera images to be played back. Note: • Image playback starts from t he point (time) that t h[...]

PLAYING BACK RECORDED IMAGES Zoomi ng the imag e duri ng playb ack 1 Press th e ZOOM bu tton during playback. The images will be enlarged. 2 To return an enlarged image to normal image display, pr ess the ZO OM butto n once more. The zoom will be cancel ed and norm al images will appear. Note: You can also change the zoom position. For details on t[...]

PLAYING BACK RECORDED IMAGES Playing back multi ple-screen displays Recorded images can be pl ayback in several split-screen formats. Furthermore, the images from each camera can be displayed in any position within the split-screen. (S ee page 81.) 1 Press the P LAY/STOP button . Playing back images as 9-screen or 16-screen displays 1 Press th e MU[...]

SEARCHING FOR RECORDED IMAGES Images that have been recorded in the alarm recording area and in the archive area can be played back. Furthermore, images can also be searched for by recording dat e and time, and you can also search for moving objects t hat have been detected by a m otion sensor during image playback. 0101 0102 0103 0104 0105 0106 01[...]

SEARCHING FOR RECORDED IMAGE S Alarm search All alarm recording images in the al arm recording area can be searched for and played back. If pre-alarm images have i s recorded, the images immediately before t he alarms can also be pl ayed back. 1 Press the S EARCH button d u ring reco rding or when the digi tal vid eo reco rder is s topped . The SEA[...]

SEARCHING FOR RECORDED IMAGE S Alarm thumbnail search Alarm images can be searched f or and played back from thumbnails. All alarm i mages recorded in the alarm recording area are displayed as thumbnails. 1 Press the S EARCH button d u ring reco rding or when the digi tal vid eo reco rder is s topped . The SEARCH screen appears. 2 Use the jog dial [...]

SEARCHING FOR RECORDED IMAGE S 2 Use the jog dial to select TIME/DATE SEARCH and then turn the shuttle d ial clockwise. The TIME/DATE S EARCH screen appears. 1 RECORDING TOP: The date and time of the first recorded image is displayed. 2 RECORDING END: The date and time of the latest (m ost recently) recorded image is di spl ayed. 3 CHANNEL: Enter t[...]

SEARCHING FOR RECORDED IMAGE S 2 Use the jog dial to select ARCHIVE AREA SEARCH an d then turn th e shuttle dial clockw i se. The ARCHIVE AREA SEARCH screen appears. 1 NO: The archive number i s displayed. 2 DATE: The date of the recorded image is displayed. 3 TIME: T he start t ime of the recorded image is displayed. 4 CH: The channel (camera numb[...]

SEARCHING FOR RECORDED IMAGE S 4 Use the jog dial to select the area to search (example: NORMAL), and then turn the shu ttle dial clockwise. The cursor moves to CHANNEL. Note: If the sett ing for MULT IPLEXER in the VIDEO INPUT SET menu is set to “ NO USE ” , the c ursor wi ll mov e to S TART PREVIEW. Examples of record ing area selection: • [...]

SEARCHING FOR RECORDED IMAGE S 8 Turn the shuttle dial clockwise. Use the jog dial to set the END date and time (example: 8.00 pm on the current day) for the motion sensor setting, and then turn the shuttle dial clockwise. The cursor moves t o MOTION SENSOR. 9 Turn the shuttle dial clockwise. The motion sensor setting screen appears. Set the motion[...]

SAVING (COPYING) RECORDED IMAGES Important images that have been recorded onto the normal recordi ng area or alarm recording area can be copied to the archive ar ea of the hard disk or to the f ollowing media. A Copying images to the har d disk archive a r ea B Copying images from the archive area to a CompactFlash card or microdrive C Copying imag[...]

SAVING (COPYING) RECORDED IMAGES A Copying images to the hard disk archive area 1 Play back the images in the normal recording area or alarm recording area that is t o be copied, and pause pl ayback at the image that is to be copied. (See page 26.) Note: Images from all cameras (1 t o 16) cannot be copied all at once. Be sure to use the cam era sel[...]

SAVING (COPYING) RECORDED IMAGES B Copying images from the archive area to a CompactFlash ca rd or microdrive Insert a Comp actFlash card or microd rive into the Co mpactFlash slot on the front p anel. When inserting the Com pactFlash card or microdrive, make sure t hat the direction of insertion is correct. 1 Display an image from the archive area[...]

SAVING (COPYING) RECORDED IMAGES 5 Use the jog dial to select the SECONDS setting, and then turn the shuttle d ial clockwise. The cursor moves t o START. • PICTURES: Specify the number of images to be copied. • SECONDS: Specify the number of seconds of images to be copied. • MINUTES: Specify the number of minutes of i mages to be copied. Note[...]

SAVING (COPYING) RECORDED IMAGES C Copying images from the archive area to a DDS (DAT) drive or CD-R drive ☞ Connecting t o a drive Insert a recommended SCS I card for connecting the DDS (DAT) drive into the PC card slot at the rear of the digital video record er. Images from the archive area can be copied to the DDS (DAT) drive, and images recor[...]

SAVING (COPYING) RECORDED IMAGES Reading data from a DDS (DAT) drive into the archive area Note: All of the previously recorded images i n the archive area are deleted when images are transferred i n this way. 1 Press th e COPY b u tton during recordi ng or when the digital video r ecorder is sto p ped. The ARCHIVE SE T screen appears. 2 Use the jo[...]

SAVING (COPYING) RECORDED IMAGES Copying images to a CD-R dr ive 1 While viewing the still image to be copied from the archive area, pr ess the COPY button. The COPY screen appears. Refer to page 31 for det ails on playing back images in the archive area. 2 Use the jog dial to select “ COPY TO ” , and then turn the shuttle dial clockw i se. The[...]

MENU FLOW CHART AND MENU OPERATIONS These menus let you m ake a variety of settings relating t o recording and also relating to the multiplexer functions. Recording and monitoring will not be possible unless the vari ous sett ings have been made, so you should always make the appropr iate setting s for the usage conditions. Menu Flow Char t <COP[...]

MENU FLOW CHART AND MENU OPERATIONS Basic menu scr e en operations 1 Press the M ENU button. The MAIN MENU screen appears. 2 Turn the jog dial clockwise or counter clockwise to move the cursor to the menu items (example: INITIAL SET). The selected item is highlighted. 3 Turn the shuttle dial clockwise. The sub-menu appears. 4 Press th e EXIT/OS D b[...]

INITIAL SET ME NU These menus let you m ake a variety of settings relating i nitial settings. A LANGUAGE/CLOCK SET menu This describes how t o set the menu screen language and the date and time that are norm ally displayed on the screen. I n addition, if more than one device is connect ed to the digital video recorder, you can adjust the time setti[...]

INITIAL SET MENU CLOCK SET settings (default setting : 01-01-2002 TUE 00:00:00) You should always set the dat e and time correctly. This digit al video recorder includes the recording t ime with recorded images, and uses this time for playback and searching. Example: To set the date and time to 8.30 a.m. on 22 May 2002 1 When the cu rsor is at th e[...]

INITIAL SET MENU EXT. CLOCK S ET setting (default setting : 01:00) If more than t wo devices are connected at the same time, the time settings (ADJUST T IME) for the digital video recorder are also applied to these devices. 1 Connect th e other d evices to the input terminal (CLOCK SET IN) and output ter minal (CLOCK SET O UT ) at th e rear of the [...]

INITIAL SET MENU ☞ Operabl e functions during the period set by the timer Each of the followi ng menu settings is required t o operate these timer functions. After you have made t he menu settings, be sure to make the timer settings. • To chang e camera images into automatic switching screens. Set “ SEQUENCE ” on SCREEN SET screen • To hi[...]

INITIAL SET MENU Example 2: S et the timer operation as follows ☞ To set TIME PERIOD A time zones to automatic switching screen and monitor mask. ☞ To set TIME PERIOD B timer zones for the motion sensor. 1 Turn the jog dial to move the cursor to the SEQUE NCE setting in the SELECT TIME PERIOD menu, and then turn the sh uttle dial clockwise. The[...]

INITIAL SET MENU D Automatic camera dete ction This automatically detects the cameras t hat are connected to the digital video recorder and changes all settings for cameras t hat are not connected to “ OFF ”. 1 Press the M ENU button to displ ay the INITIAL SE T menu screen, and then turn the shuttl e dial clockwise. The INITIAL SET sub-menu ap[...]

RECORDING SETTING <ALARM OPERATION SET> MAIN MON. DISPLAY : FULL ALARM PRIORITY : LAST MON.2 DISPLAY : OFF RETRIGGER : OFF MOTION SENSOR -> ALARM DURATION SET -> <ALARM REC MODE SET> PICTURE QUALITY : ENHANCED AUDIO RECORDING : OFF ALARM RECORDING : OFF ALARM INTERLEAVE : ONLY PROGRAM GROUP : OFF REC RATE: @ 25FPS, DURATION: 5SEC [...]

RECORDING SETTING A RECORDING AREA SET menu This describe how t o make the various settings for each recording area. TOTAL CAPACITY di splay This shows the total recordi ng capacity of the hard disk. Thi s display cannot be changed except when t he hard disk capaci ty itself is changed. With the initial hard di sk setting, the normal recording area[...]

RECORDING SETTING AREA FULL RESET setting When the normal recording area and al arm recording area of the hard disk become full, the images in the recording areas will be automatically overwritten, starting from t he oldest images that have been recorded. However, you can change this setting to prevent overwriting of i mages when the recording area[...]

RECORDING SETTING 5 Use the jog dial to change the setting to “ ON ” , an d then turn the shuttle d ial clockwise. The cursor moves to TOTAL NUMBER. 6 Turn the shuttle dial clockwise, use the jog dial to set the total number of digital video reco rders connected (example: 3), and then turn th e shuttle dial clockw i se. The cursor moves t o OVE[...]

RECORDING SETTING Relationship between RECORDING AREA SET and OVERW RITE If the normal recording area and alarm recording area become ful l, select AREA FULL RESET for the normal recording area or alarm recording area in the RECORDING AREA SET menu. (See page 52.) Note: No audio input is provided f rom the digital video input terminals. Audio signa[...]

RECORDING SETTING D PROGRAM REC SET menu Recording for particular cameras only can be carried out by specifying those cameras. Programs from no. 1 to no. 4 can be set. For example, program no. 1 could be set to record im ages from cameras 1 to 4 only, and program no. 2 could be set to record images from cameras 3 to 9. I n addition, these programs [...]

RECORDING SETTING E TIMER SET menu These settings must always be made when carrying out t imer recording. TIMER SET setting This sets the starting t ime and stopping time for each day, and also sets the recording speed. 1 WEEK This selects the day f or the timer setting. While a day is flashing another day can be sele cted. The 7th line (SAT) and 8[...]

RECORDING SETTING 9 Use the jog dial to change the setting to “ OF F ” , and then turn th e shuttle dial clockw i se. “ 25 ” flashes in t he FPS column. 10 Use the jog dial to set the recording cycle to “ 12.50 ” , and then turn the shuttle dial clockwise. “ OFF ” flashes i n the SET column. Note: The image qual ity for timer record[...]

RECORDING SETTING 7 Use the jog dial to change from “– –” to “ 20 ” , and then turn the shuttle d ial clockwise. “ – – ” (minutes) flashes in the STOP column. 8 Use the jog dial to change from “– –” to “ 30 ” , and then turn the shuttle d ial clockwise. The “ OFF ” setting for PROGRAM flashes. 9 Use the jog dial [...]

RECORDING SETTING F ALARM REC MODE SET menu These settings relate to alarm recordi ng. ALARM REC MODE SET setting This lets you set the recordi ng quality, recording method (frame or field), audio recording and recording speed for the alarm recording area. 1 Press the MENU button to select RECORD SET, and then turn the shuttle d ial clockwise. The [...]

RECORDING SETTING 5 Turn the shuttle dial clockwise, use the jog dial to set audio recording (examp l e: “ ON ” ), and then turn the shuttle dial clockwise. The cursor moves to ALARM RECORDING. Note: • Audio recording can be set when the REC RATE setting i s 5 FPS or 10 FPS or more. • When set to “ ON ” , the letter “ A ” (audio rec[...]

RECORDING SETTING A SW1 Recording alternates between images from the cameras where an alarm has occurred and images from all cameras that are connected . If alarms have occurred at more t han one camera, images from t he cameras where an alarm has occurred and images from all cameras a re alternately recorded one image at a time. • Recording patt[...]

RECORDING SETTING Pre- alarm re cording setting 1 Use the jog dial to move the cursor to ALARM RECORDING, and then turn th e shuttle dial clockw i se. “ OFF ” flashes. 2 Use the jog dial to change the “ OF F ” setting to some o ther mode (example: ENABLED), and then turn the shuttle d ial clockwise. The PRE-ALARM RECORDING setting changes f[...]

RECORDING SETTING Alarm trigger setting 1 Use the jog dial to move the cursor to the ALARM TRIGGE R setting. 2 Turn the shuttle dial clockwise, use the jog dial to select the method o f detecting intru ders (example: “ SENSOR ” ), and then turn the shuttle dial clockwise. The cursor moves t o PICTURE QUALITY. Display examples: Alarm r ecording [...]

RECORDING SETTING G ALARM OPERATION SET menu <ALARM OPERATION SET> MAIN MON. DISPLAY : FULL ALARM PRIORITY : LAST MON.2 DISPLAY : OFF RETRIGGER : OFF MOTION SENSOR -> ALARM DURATION SET -> - - - - - - - - - - - - - - - - - - - - - - - - - - - - A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 01 T-1 LEVEL:OFF MODE[...]

RECORDING SETTING There are three types of alarm detection: external alarm, motion sensor al arm and signal loss alarm. Alarm settings include speci fying the period during which t he buzzer will continue to sound and the method of recording images during each al arm. Type of alarm Digital video recorder operation Monitor screen display Test patter[...]

RECORDING SETTING Alar m display se ttings 1 Press the MENU button to select RECORD SET, and then turn the shuttle d ial clockwise. The RECORD S ET sub-menu appears, and t he cursor is positioned at RECORDING A REA S ET. 2 Use the jog dial to move the cursor to ALARM OPERAT I ON SET, and then tur n the shuttle dial clockwise. The ALARM OPERATION S [...]

RECORDING SETTING MOTION SENSOR setting (default setting: OFF) To display motion sensors on each camera image and make settings for intruder detection. The motion sensors work as shown below. 1 Motion sen sor off status When the jog di al is turned, the cursor moves. 2 Sens or setti ng When the shuttle dial is t urned clockwise, the setting changes[...]

RECORDING SETTING 7 Use the jog dial to move the cursor to T-1, and then tur n the shuttle dial clockw i se to set “ T-2 ” . 8 Use the jog dial to move the cursor to the “ OFF ” setting for LEVEL, and th en turn the shut tle dia l clockwi se to set the sensitivity to “2” . 9 Use the jog dial to move the cursor to MODE, and then turn the[...]

RECORDING SETTING 5 Repeat the ab ove proced ure to set the alarm dur ation for other camer as. 6 Press th e EXIT/OS D button . The display returns to t he normal screen. Resetting an al arm ☞ When images from the camera where the alarm was detected are appearing in a single-screen disp lay 1 Press the camera select button for the camera that is [...]

GENERAL SETTING <BUZZER SET> ALARM : ON DISK FULL : ON DISK ERROR : ON LOCK WARNING : ON KEY IN : OFF NON REC : OFF <SECURITY LOCK SET> LEVEL PASSWORD(4-8) USE ADMIN -------- OFF USER -------- OFF REC CONTROL : USER <RS-232C/RS-485 SET> CONTROL : RS-232C DATA SPEED : 19200 STATUS INFO : ¤¤¤ ALARM INFO : ¤¤¤ ADDRESS : ¤¤¤ [...]

GENERAL SETTING A DISPLAY SE T menu This sets which operation displays appear on the monitor. DISPLAY SE T setting The date and time that have been set using the CLO CK SET and other settings can be di splayed on the monitor screen during recording and playback. The def ault setting is for all displays to be “ ON ”, so all setting items in this[...]

GENERAL SETTING 3 Use the jog dial to enter “H” , an d then tu rn the shuttl e dial clockwise. The cursor will move to t he right. Repeat the above procedure to enter the title “ HALL -1F ”. Note: To change the t itle, turn the shuttle dial clockwise so t hat the cursor moves to the character to be changed, and then re-enter the character. [...]

GENERAL SETTING 5 Press th e EXIT/OS D button . The display returns to t he normal screen. C SECURITY LOCK SET setting Passwords for this digital vi deo recorder can be set by t he Administrator or the User or bot h. Setting passwords enables privileges to be set for recording and playback operations. Af ter the security lock has been set , if some[...]

GENERAL SETTING ☞ User password setting Example: T o set the password to “ AB123456 ” 1 Use the jog dial to move the cursor to USER, and then turn the shuttle d ial clockwise. The first password entry bar f lashes. 2 Use the jog dial to display “A” , an d then tu rn the sh uttle dial. The second password entry bar f lashes. • The charac[...]

GENERAL SETTING ☞ Security lock setting 1 At the normal monitor ing screen, press and hold the SHUTTLE HOLD bu tton for approximatel y 3 seconds. The LOCK i ndicator at the front panel illum inates and the buzzer sounds. The security lock i s then set. 2 To check the security lock, press the REC/STOP button or the MENU button. The password entry [...]

GENERAL SETTING RS-485 Select ion Connect the RS-485 control t erminals (A and B ) of the digital video recorder in series with other devices such as a controller, multiplexer or another digital video recorder. (See page 9.) 1 Turn the shuttle dial clockwise, use the jog dial to select RS-485, and then turn the shuttle d i al clockw ise. The cur so[...]

GENERAL SETTING 3 Turn the shuttle dial clockwise. A WARNING screen appears and then “ NO ” flashes. 4 Use the jog dia l to se lect YES, and t hen turn t he shut tle dia l. The “ HDD INITIALIZING! ” screen appear and the hard disk is initialized. Then the display is returned to t he HDD SET screen. 5 Press th e EXIT/OS D button . The displa[...]

GENERAL SETTING NETWORK SET setting 1 Press the M ENU button to select GENERAL SET , and then turn th e shuttle dial clockw i se. The GENE RAL SET sub-menu appears, and the cursor is positioned at DISPLA Y SET. 2 Use the jog dial to move the cursor to NETWO RK SET, and then turn the shuttle dial clockwise. The NETWO RK SET sub-m enu appears, and th[...]

GENERAL SETTING PASSWORD SE T setting For network connection there are t hree access levels, each of whi ch has a password. Each password can consist of a combination of 4 to 8 alphanumeric symbols. Note: The cursor cannot be m oved to ID or PASSWORD (4-8). Example: S et AB123456 as the ID1 password. 1 Use the jog dial to move the cursor to ID1, an[...]

SCREEN SETTING <SCREEN SET> 1.MULTI SCREEN : NORMAL MULTI SCREEN SET -> 2.SEQUENCE : 1S SEQUENCE SET -> 3.MASK : OFF MASK SET -> <MAIN MENU> 1.INITIAL SET -> 2.RECORD SET -> 3.GENERAL SET -> 4.SCREEN SET -> 5.POWER FAILURE/USED TIME -> 6.COPY MENU SETTINGS -> MOVE LINES WITH JOG, SELECT WITH SHUTTLE You can ch[...]

SCREEN SE TTING A MULTI SCREEN setting The order in which camera images are displayed in 4-screen, 9-screen and 16-screen displ ays can be set as desired. Note: The same camera image cannot be displayed m ore than once on the same screen. Example 1: T o display camera 1 image on cameras 06, 11, 16 (in a 4-screen display) The DSR-3009P model can dis[...]

SCREEN SE TTING Example 2: T o display the image from camera 16 at camera 05 position (in a 16-screen display) 1 Use the jog dial to move the cursor to MULT I SCREEN, and then turn the shuttle dial clockwise. “ NORMAL ” flashes. 2 Use the jog dial to change the MULTI SCREEN setting to “ CHANGE ” , and then tur n the shuttle dial clockwise. [...]

SCREEN SE TTING 3 Use the jog dial to set the switching time to “ 05 ” , and then turn th e shuttle dial clockw i se. Automatic switching display is set to i ntervals of 5 seconds. Display examples: • 1 – 30S: Sets the automatic switching t ime to the number of seconds selected. • INDIV. : Select when setting individual switching t imes f[...]

SCREEN SE TTING 9 Press th e EXIT/OS D button . The display returns to t he normal screen. Example 3: T o set a 5-second interval for the automatic switching of main monitor images and to prevent automatic switching from o ccurring when it is not required, such as when using the timer funct ion. 1 Set the timer setting for both TIM ER A and TIMER B[...]

SCREEN SE TTING 12 Use the jog dial to set T-2, and then turn the shuttle dial clockwise. Repeat this procedure to switch between T-1, T-2, T-3 and T-4. 13 Use the jog dial to move the cursor to 09, and then turn the shuttle dial clockw i se. “ ON ” flashes. 14 Use the jog dial to set “ OFF ” , and then tur n the shuttle dial clockwise. Rep[...]

SCREEN SE TTING 2 Use the jog dial to move the cursor to MAS K, and then turn the shuttle d ial clockwise. “ OFF ” flashes. 3 Use the jog dial to set “ ON ” , and then turn the shuttle dial clockwise. The cu rsor moves t o MASK SET. 4 Turn the shuttle dial clockwise. The MASK SET sub-menu wi ll be displayed, and the cursor will be at the T-[...]

POWER FAILURE/USED TIME DISPLAY 1 Press the M ENU button to select POW ER FAILURE/USED TIME, and then turn the shu ttl e dial clockwise. The POWER FAI LURE/USED TIME sub-menu appears. Check details such as the dat e and time of the power failure and the usage time for t he hard disk. 2 Press th e EXIT/OS D button . The display returns to t he norma[...]

SAVING MENU SETTING DETAILS The details of m enu settings can be saved (copied) ont o a CompactFlash card, and settings which have been saved onto a CompactF l ash card can be retrieved (loaded) in to the digital video recorder. This funct ion can be used to ma ke the same settings easily or severa l digital video recorders. 1 Press the MENU button[...]

SAVING MENU SETTING DETAILS Loading saved menu settings This procedure loads m enu sett ing details t hat have been saved onto a CompactFlash card into the digital video recorder. Note: When loading t he settings into the digital video recorder, you can select whether t o load recording area settings also. If you read different menu settings into a[...]

PROGRAM REC RECORDING RATE • Without PRE ALARM 1 2 3 4 5 6 7 8 9 1 01 11 21 31 41 51 6 25.000 12.500 8.333 6.250 5.000 4.167 3.571 3.125 2.778 2.500 2.273 2.083 1.923 1.786 1.667 1.563 12.500 6. 250 4.167 3.125 2.500 2.083 1.786 1.563 1.389 1.250 1.136 1.042 0.962 0.893 0.833 0. 781 8.333 4.167 2.778 2.083 1.667 1.389 1.190 1.042 0.926 0.833 0.75[...]

INTERFACE SPECIFICATIONS RS-232C 9-pin conn ector specifications Pin No. Si gnal Op erati on Sign al dire ction 1 –– – 2 RXD Receive data Computer → Di gital video recorder 3 TXD Transm it data Digital video recorder → Computer 4 –– – 5 GND Ground – 6 –– – 7 RTS Request to send Digital video recorder → Computer 8 –– ?[...]

INTERFACE SPECIFICATIONS Command Table The following table shows al l of the com mands that can be processed by t he digital video recorder. If a command sent does not correspond to a digital video recorder function, the command is received but no operation i s carried out. Uppe r bit 01234567 Lower bit 0 TIMER ON/ OFF 1 2 3 SHIFT ← SHIFT → 4 S[...]

SPECIFICATIONS Hard disk capacity : 80 GB or 160 GB Television System : Based on PAL colour signal standard Picture Reso lution : 720 x 288 (Field) Compression : M-JPEG Picture Q uali ty : 5 Levels (B asic, Normal, Enhanced, Fine, S uper Fine) Record ing Type : Field Record ing Recording S peed : 27 Levels. Recording Area : Normal Recording Area, A[...]

SANYO Electric Co., Ltd. 1AC6P1P2521-A L8HBA/XE, XE2, UK, UK2, L8HBB/ XE, XE2, UK , UK2 (0702KP-CZ) Printed in Japan Prin ted on rec ycle d paper Gedruc kt auf recyc eltem Pa pier Imprimé sur d u papi er rec yclé Impres o en papel recic lado Stam pato su cart a rici clata L8HB A/XE (DSR-3 016, 300 9 GB) 2002 . 7. 31[...]