Sanyo PLC-XF47 инструкция обслуживания

Multimedia Pr oject or MODEL PLC-XF47 Owner ’ s Manual ✽ Projection lens is optional. PLC-XF47K[...]

2 This Multimedia Projector is designed with most advanced tec hnology for port ability , durability , and ease of use. This projector utilizes built-in multimedia feat ures, a palette of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology . ◆ Functionally Ric h ◆ Simple Computer S ystem Set ting The projector has the Mul[...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Cont ents Feat ur es and Design . . . . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . . . . . . . . . . 3 T o T h e O w n e r ..................... 4 Saf ety Instr uctions . . . [...]

4 C A U T I O N : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SERVICING TO QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS VO L TAGE C O N S T I T UT IN G A R I S K O F E L E C T R I C SHOCK IS PRESENT WI THIN THIS UNIT . THIS S YM[...]

5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C pow er supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollo w all warnings and instr uctions mark ed on the p[...]

6 Openings in the cabinet are provided f or v entilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. CA UTION Hot air is exhausted from the e xhaust v ent. When using or installing the projector , the follo wing precautions should be taken. – Do not put any fl[...]

7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. Installing the Projector in Proper Directions A void positioning the projector as described belo w when installing . Positioning Precautions Do not roll the projector more than 1 0 degrees from side to s[...]

8 Moving the Projector CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suitable carr ying case. – Do not transport the projector by courier or an y other transport ser vice in an unsuitable transport case. This may [...]

9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug . Should the fuse need to be replaced, an A S T A approv ed BS 1 362 fuse must be used of the same rating , marked thus AS A . If the fuse cover is det ac hable, never use the[...]

1 0 u e r t Front o q w y i Bottom Back q Infr ar ed Remote Receiv er (F r ont) w Lens Cap (Option) e Projection Lens (Option) r Lev el and Pitch Adjust Handle !2 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !0 Exhaust V ent !1 Infr ar ed Remote Receiv er (Rear) !2 Lamp Cover ![...]

1 1 Input / Output T erminals and Jacks e  R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). r USB CONNECT OR (Series B) Use this connector when controlling a computer with the remote control of the projector . Connect the USB terminal of your computer to [...]

12 y FOCUS but t ons A djust the f ocus. (p.27) q ZOOM but t ons Zoom in and out the images. (p.27) t ON/ST AND-B Y butt on T urn the projector on or of f . (p.24) i INPUT 1/2 but t on Select an input source either INPU T 1 or INPU T 2. (pp.30-32) r A UT O PC ADJ . butt on A utomatically adjusts the computer image to its optimum set [...]

13 Indicators READ Y LAMP LAMP REPLA CE W ARNING TEMP . W ARNING TEMP . READ Y LAMP REPLA CE LAMP READ Y LAMP LAMP REPLA CE W ARNING TEMP . W ARNING TEMP . READ Y LAMP REPLA CE LAMP Fr ont Indicators Rear Indicators q w e r q w e r e W ARNING TEMP . indicat or T his indicator flashes red when internal projector temperat ure is too high. (pp.61, [...]

Remote Control P art Names and F unctions q t e !0 i !4 r !5 !3 !1 w y u o !7 !2 !8 !6 !9 @0 e LIGHT but t on Light the but tons on the remote control for about 1 0 seconds. r MENU butt on Open or close the On-Screen MENU . (pp.25-26) t POINT ed 7 8 butt ons – Select an item or adjust the value in The ON-SCREEN MENU . –P an the image in DIGI[...]

Remote Control Battery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size bat ter ies F or correct polarity (+ and –), be sure bat tery terminals are in contact with pins in the compartment. T o ensure saf e operation, please obser ve the f ollo wing precau[...]

16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . S witc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time. Change the remote control code for the projector first bef ore c hangi[...]

1 7 Installation Lens Installation Bef ore set ting up a projector , install Projection Lens on a P rojector . 1 . Bef ore installation, c hec k where a projector is used and prepare a suit able lens. F or the specifications of Projection L ens, ref er to the manual at tac hed separately or contact sales dealer where you purc hased the projector . [...]

1 8 Picture Level and Pitch Adjustment Installation Picture tilt and projection angle can be adjusted with handles on both sides of a projector . P rojection angle can be adjusted to 5.7 degrees upward. 1 2 3 LEVEL AND PI TCH AD JUST HANDLE AD JUST ABLE FEET Height of front f eet can be adjusted by t urning handles. Press the knob on the handle. Th[...]

1 9 T erminals of Projector This projector applies v arious input/output terminals and 4 terminal slots f or e xpansion to tune to div ersit y of signals from computers and video equipment. 4-built-in T erminal Slots enable you to arrange desired combinations of input sources just by c hanging T erminal Boards. F or T erminal Boards, contact sales [...]

20 Installation ANALOG vG B R H/HV V DIGITAL （ DVI-D) INPUT 1 R/C JACK USB RESET INPUT 2 INPUT 3 INPUT 4 SERIAL PORT IN SERIAL PORT OUT S-VIDEO VIDEO/Y Pb/Cb Pr/Cr Connecting to Computer V GA Cable Monitor Output Desktop type Laptop type T er minals of a Project or Monitor Output D VI Cable BNC Cable ✽ Monitor Output U n p lu g t h e p o we r c[...]

21 Installation Connecting to V ideo Equipment ANALOG G B R H/HV V DIGITAL(DVI-D) INPUT 1 R/C JACK USB RESET INPUT 2 INPUT 3 INPUT 4 SERIAL PORT IN SERIAL PORT OUT R S-VIDEO VIDEO/Y Pb/Cb Pr/Cr Video Source (e xample) Video Casset te Recorder Video Disc Pla y er RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment[...]

22 NOTE ON THE POWER COR D A C power cord must meet the requirements of the country where you use the projector . Confirm the A C plug type with the c hart below and proper A C pow er cord must be used. If the supplied A C pow er cord does not matc h your A C outlet, cont act your sales dealer . Pr oject or side A C Outlet side T o POWER CORD CONNE[...]

23 T urning On the Projector Connect the projector’ s A C pow er cord into an A C outlet and t urn the MAIN ON/OFF S witc h to ON. The LAMP indicator lights red and the READ Y indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control. The LAMP indicator dims red and the cooling fans start to operate. Th[...]

24 Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P o wer of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . The LAMP indicator lights bright and the READ Y indicator turns of f . Af ter the projector is turned of f [...]

25 MENU AUTO PC ADJ. IMAGE SEL. SELECT ZOOM FOCUS LENS SHIFT ON/STAND-BY INPUT 1/2 INPUT 3/4 Side Contr ol SELECT butt on How to Operate the On-Screen Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sect[...]

26 Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 33). Used to select an image lev el among Standard, Real, and Image 1–1 0(p. 37). Used to adjust the size of the image. [Normal/T rue/Wide/ F ull screen/Custom/Key stone/Ceiling/R ear/Reset/Digital zoom +/–] (pp.38-3[...]

27 Operating with Projector Control Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired point without having pict ure distortion. The screen can be mo v ed up or do wn to 50 percent, or sidew a y s up to 1 0 percent from the central axis of the lens shif t. Lens Shif t Adjustment ✔ Note: ?[...]

28 Operating with Remote Control Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen. T o cancel the FREEZE function,[...]

29 Press the NO SH O W but ton on the remote control to blac k out the image. T o restore to normal, press the NO SHO W but ton again or press any other but ton. NO SHOW but ton KEY ST ONE but t on Reduce the upper width with P oint e button. Reduce the low er width with P oint d button. Reduce the lef t part with P oint 7 button. Reduce the right [...]

30 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPUT 3 or INPU T 4 but tons on the remote control. It switc hes to INPU T 1, INPU T 2, INPU T 3 or INPUT 4 as y ou press the INPUT but ton. Bef ore using the INPU T but ton on the remote control, y ou must select a correct input source b y On-Screen Menu and the latest input sou[...]

31 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton. The Source Select Menu appears. 1 2 Use the P oint ed but tons to select the desired source an[...]

32 When the video input signal is connected to the S-VIDEO jac k, select S-Video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When connecting to video equipment, select the type of Video source in the Source Select Menu. [...]

33 Computer System Selection This projector automatically t unes to various types of computers based on V G A, S V GA, XG A, SXGA, SXG A+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 70–71). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to project a [...]

34 Auto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint ed but tons [...]

35 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned b y Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust se veral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It al[...]

36 Exit the PC A djust Menu. T o store the adjusted dat a, select Store and then press the SELECT but ton. Move the red arro w pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select R eset and press the SELECT but ton. A confirmation box appears and then select [Y es][...]

37 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Normal picture le v el preset on the projector . Standard Pi[...]

38 ✔ Note: • T rue, F ull screen, and Digital zoom +/– cannot be selected when no signal is detected in the PC System Menu. (p.33) • The projector cannot display and resolution higher than 160 0 x 1200. If your computer ’ s sc r ee n re so l ut i on is h ig h er th a n 16 0 0 x 12 0 0 , lower the resolution before connecting the projector[...]

39 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. Press the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digit al zoom + mode b y pressing the D .ZOOM but ton on t[...]

40 A V SY STEM MENU (VIDEO OR S-VIDEO) A V SY STEM MENU (COMPONENT VIDEO) V ideo System Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V S ystem Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired system and then press the SELECT bu[...]

41 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Image Level Selection Mov e the red frame pointer to the des[...]

42 Screen Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 1 2 ✔ Note: • Wide cannot be operated when “720p, ” “1 035i[...]

43 Ke ystone This function is used to store or reset the k e ystone cor rection when the A C pow er cord is unplugged. Use the P oint 7 8 but tons to switch between eac h option. Store . . . Keep the k e ystone cor rection ev en when the A C pow er cord is unplugged. Reset . . Release the ke y stone correction when the A C pow er cord is unplugged.[...]

44 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint 7 8 but tons to adjust the setti[...]

45 A uto pictur e contr ol Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position. Clear the c heck mark if y ou do not w ant to apply the adjusted col[...]

46 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 15). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressiv e mode. Pres[...]

47 Pictur e Image Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a v ailable in English, German, F renc h, Italian, Spanish, P ort uguese, Dutc h, Sw edish, R ussian, Chinese, Korean, or J apanese. Use[...]

48 This function allo ws y ou to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Before capturing an image, select “ Standard ” in the Image Select Menu to capture a proper image. (pp. 37 , 41) • A signal from a computer can be captured up to XGA (1 024 X 7 68). • Certain signals [...]

49 Change the Log o PIN code loc k setting Af ter a correct L ogo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 but tons to switch On/Of f, This function pre v ents an unauthorized person from c hanging the screen logo. Of f . . . . The screen logo can be c hanged freely from the Logo Menu. On . . . . The screen logo ca[...]

50 Lamp control Choose the running speed of cooling f ans from the f ollowing options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an contr ol Remote contr ol Remote contr ol When pressing the SELECT but ton at Remote control, the R emote control code menu appears. The eight dif f erent remote control codes (Code 1?[...]

51 On start When this function is set to “ On, ” the projector will be automatically turned on just b y connecting the A C pow er cord to the wall outlet. ✔ Note: • Make sure that the main switc h is ON, otherwise the On start function does not work. • Be sure to turn of f the projector properly (see “T urning Off the Projector” on pa[...]

52 Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint ed but tons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation b y unauthorized persons. . . . . . Unloc ked. . . . . . Loc k the side control but to[...]

53 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 75, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE ST AR TED . The PIN code can be c hanged to your desired f our -digit number . Press the P oint d[...]

54 F act ory def ault This function ret urns all set ting values e xcept f or the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F act ory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the next box appears. T est[...]

55 Maint enance and Car e Air Filter Care and Cleaning T urn of f the projector , and unplug the A C power cord from the A C outlet. 1 2 3 4 Pull out the air filter from the projector . Clean the filter with brush out dust and particles. Replace the air filter in a projector . AIR FIL TER CA UTION Do not operate the projector with the Air Filter(s)[...]

56 Lamp Management This P rojector is equipped with 4 P rojection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. The Lamp Management F unction detects the status of all lamps and sho ws the status on screen or on the LAMP REPLA CE indicator . This function also automatically controls the Lamp Mode w[...]

57 Maint enance and Car e Chec k the number of lamp to be replaced on the Lamp Status Display . Remo v e the two scre ws on the Lamp Cov er and press the but ton to open the Lamp Cover . (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle. 4 T urn of f the projector and unplug the A C P ower Cord. [...]

58 Maint enance and Car e ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through y our dealer . When ordering a Projection Lamp, give the follo wing inf ormation to the dealer . ● Model No. of y our pr oject or : PLC-XF47/PLC-XF47K ● Replacement Lamp T ype No. : PO A -LMP1 09 (Service Parts No. 61 0 334 6267) Resetting the Lamp Counter [...]

59 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may dif f er from lamp to lamp and according to the environment of use. T here is no guarantee of the same lifetime for eac h lamp. Some lamps may fail or termina[...]

60 Unplug the A C pow er cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blo w er to clean the lens. A void using an e xcessiv e amount of cleaner . Abrasive cleaners, solvents, or other harsh c [...]

61 Maint enance and Car e The WARNING indicators sho w the st ate of the function whic h protects the projector . Chec k the state of the W ARNING indicators and the READ Y indicator to take proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector [...]

62 T roubleshooting Bef ore calling y our dealer or ser vice center for assistance, c hec k the items belo w once again. 1 . Make sure you ha v e properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and po w er cords are properly conne[...]

63 Pictur e is not bright enough. – Chec k if “Contrast” or “Brightness” are adjusted properly . (See page 44) – Chec k if “Image level” is selected properly . (See pages 37 , 41) – Chec k the Lamp control function. ( See “SETTING” section on page 50) – Chec k the Lamp replace indicator . If it lights, the end of lamp lif e [...]

64 W ARNING: High voltag es are used t o oper ate this pr ojector . Do not at tempt t o open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about the problem. W e will advise you ho w to obtain se[...]

65 Menu T ree Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Network RGB Go to S ystem (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq. V -sync freq. PIN code loc k Infor mation Ke y loc k Screen Language Lamp m[...]

66 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal T rue Wide F ull screen Digital zoom + Digital zoom - PC Adjust Auto PC adj. Fine sync. T otal dots P osition H P osition V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 Quit ✽ Sy[...]

67 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1 2 languages provided. Menu Logo Lamp control Both/F ront/Bac k Normal/Max P ow er management Bac kground On/Of f Logo PIN code c hange Quit RC sensor Ready Of f Shut down 1–30 Min. [...]

68 Indicators and Projector Condition Chec k the indicators for the projector condition. Indicat ors Pr oject or Condition LAMP red READ Y green W ARNING TEMP . red LAMP REPLA CE orang e The projector is of f . (The main switc h is OFF position or the A C pow er cord is unplugged.) The projector is in stand-by mode. P ress the ON/S T AND-B Y but to[...]

69 Indicat ors Pr oject or Condition LAMP red READ Y green W ARNING TEMP . red LAMP REPLA CE orang e The temperat ure inside the projector is elevated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The projector cannot be t urned on. When the projector is cooled do wn enough and the temperat ure retur[...]

70 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. PC A djustment is limited when selecting these modes. Appendix ✽ T r ue cannot be selected when UXGA2, UXG A3, UXG A4 and UXG A5 are selected (p.38) ON-SCREEN DI[...]

71 When an input signal is digital from the DVI terminal, ref er to the c hart below . Appendix ✔ Note: • Depending on the condition of signals and the type and length of cables, these signals may not be properly viewed. • Specifications are subject to c hange without notice. ON-SCREEN DISPLA Y RESOLUTION H-Freq.(kHz) V -F r eq.(Hz) D-V GA 64[...]

72 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 22.87” x 9.902” x 32.1 1” (581 mm x 251 .5 mm x 815.5 mm) (Not including adjustable f eet) Net Weight 80.3 lbs (36.5 kg) F eet Adjustment 0˚ to 5.7˚ P anel Resolution LCD Panel S ystem 1 .8” TFT Activ e Matrix type, 3 panels [...]

73 Optional Parts Model No. Wired Remote Cable(30m) : PO A-CA-RC30 Option Slot Board (DVI) : PO A-MD1 8D VI Option Slot Board (5-BNC) : PO A-MD1 6D VI Option Slot Board (D-sub 15) : PO A-MD04V GA Option Slot Board (Dual-SDI) : PO A-MD1 7SDID Option Slot Board (Network board) : PO A-MD1 3NET2 The parts listed belo w are optionally a v ailable. When [...]

7 4 Configurations of T erminals ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert. sync.) DDC Data Sense 0 V ert. sync. DDC Cloc k 9 13 1 0 12 1 1 14 15 CONTROL POR T CONNECT O[...]

75 W rite do wn the PIN code number in the column belo w and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the ser vice st ation. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factor y set number will be inv alid[...]

7 6 Dimensions Unit: inc h (mm) Appendix 161 ° 14.74 (374.5) 1.38 (35) 10.61 (269.5) 7.01 (178) 7.01 (178) 8.27 (210) 1.57 (40) 8.27 (210) 3.66 (93) 22.93 (582.5) 17.56 (446) 3.26 (82.8) 9.72 (247) 9.9 (251.5) 2.36 (60) 5.7 ° 9.90 (251.5) 20.58 (522.7) 1.28 (32.5) 9.90 (251.5) 5.18 (131.5) 22.87 (581) 32.1 1 (815.5) 6.81 (173) Appendix[...]

77 Serial Control Interface This projector pro vides a function to control and monitor the projector's operations b y using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC. (See p.1 1) Launc h a communication sof tware pro vided with PC and setup the communication cond[...]

78 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (ref er to the command table below . The projector decodes the command and ret urns the 'Charactor string' with the format belo w; For mat Command F unction Projector Ret urn [...]

KE3A SANY O Electr ic Co., Ltd.[...]