Savin SP 3300 Series инструкция обслуживания

Read this manual carefully before you use this machine and keep it handy for future reference. Fo r safe and correct use, please be sure to read the Safety Information in this manual before using the machin e. SP 3300 Series User ’ s Guide[...]

Contents of this manual are subject to change without prior notice . In no even t will the company be liable for direct, indirect , in cidental or consequential damages as a result of handling or o perating the machine. Copyright © 2008 • PCL and PCL 6 are trademarks of Hewlett-Packard company . • Microsoft, Windows and Windows Vista are eithe[...]

Content s 1. Introduction Special features .............. .................... .. .................... ... ................... ... .................... ... ...... .. .................... ................... . 1.1 Printer overview ...................... ... ... ................. ................. ...................... .................... ...... ..[...]

8. Maintenance Cleaning the printer ......... ... ... ................... ... ... ... ................... ... ... ................... ... ... ............. ............... .................... ...... 8.1 Cleaning the outside of the printer . ...................... ...................... ....................... ...................... . ........ ....[...]

i Safety Information When using this machine, the following sa fety precautions should always be followed. Safety During Operation In this manual, the followi ng important symbols are used: W ARNING: W ARNING: Indicates a potentiall y hazardous situation which, if instructions are not followed, could result in death or serious injury . CAUTION: Ind[...]

ii CAUTION: Notes for Users If you continuously print multiple pages, moist or vapor may appear from the paper exit area. However this will not have any imp act on the performance of your printer . Be cautious not to touch the surface, or wait until cooled down, and keep children away from the surface. Power Supply The socket-outlet shall be in sta[...]

iii Laser Safety: Caution: Use of controls or adjustment or performanc e of procedures other than those specified in this manual might result in hazardous radiation exposure. For Users in Europe This machine is considered class 1 laser dev ice, safe for office/ EDP use. The machine contains 1 AlGaAs laser diode, 10 milliw att, 770 - 795 nanometer w[...]

1 .1 < Introduction> 1 Introduction Congratulations on the purchase of your printer! This chapter includes: • Special features • Printer overview • Control panel overview • Understanding the LEDs • Finding more information • Setting up the hardware • Altitude adjustment • Changing the font setting Special features Y our new pr[...]

1 .2 < Introduction> Machine features The table below shows a general overvi ew of features supported by your printer . (I: Installed, NA: Not Available) Features SP 3300D SP 3300DN USB 2.0 (USB 2.0: Hi-S peed USB 2.0) II Network Interface (Ethernet 10/100 Base T X) NA I PCL Emulation II PostScript Emulation II Duplex printing a a. Printing o[...]

1 .3 < Introduction> Rear view Control p anel overview 1 network port a a. SP 3300DN only . 4 duplex uni t 2 USB port 5 power receptacle 3 optional tray 2 cab le connector 6 power switch 1 Alert : Indicates the status of your printer . See page 9.5. 2 Online : Indicates the status of your printer . See page 9.5. 3 Cancel : Prints a demo page [...]

1 .4 < Introduction> Finding more information Y ou can find information for setting up and using your printer fro m the following resources, eithe r printed or onscreen. Quick Install Guide Provides information on setting up your printer , therefore, be sure to follow the instructions in the guid e to get the printer ready . Online User ’ s[...]

1 .5 < Introduction> Place the machine on a flat and stabl e surface for not letting it tilt more than 2 mm (0.08 inc hes). Otherwise, it may affect the printing quality . 2 Unpack the machine and check all the enclosed items. 3 Remove the tape holding the machine tightly . 4 Install the toner cartridge. 5 Load paper . (See "Loadi ng pap[...]

1 .6 < Introduction> Changing the font setting Y our machine has preset the font for your region or country . If you want to change the fo nt or se t the font for special conditions such as DOS environment, you can change the font setting as follows: 1 Ensure that you ha ve installed the printer driver from the provided supplied CD-ROM. 2 For[...]

2 .1 < Basic setup> 2 Basic setup This chapter includes: • Printing a demo p age • Using toner save mode Printing a demo p age After setting up your printer , print a demo page to make sure that the printer is operating correctly . Press and hold the Cancel button for about 2 seconds. A demo page prints out. Using toner save mode T oner s[...]

3 .1 < Software overview> 3 Software overview This chapter gives you an overview of the sof tware that comes with your printer . Further details about installing and using the software are explained in the Software Section. This chapter includes: • Supplied so ftware • Printer driver feature s • System requirements Supplied sof tware Y [...]

3 .2 < Software overview> System requirement s Before you begin, ensure that your system meet s the following requirements: Windows Item Requirements Recommended Operating system Windows 2000/XP/Vista and Windows Server 2003 CPU Windows 2000 Pentium II 400 MHz or higher Pentium III 933 MHz Windows XP/ Vista and Windows Server 2003 Pentium III[...]

4 .1 < Network setup (SP 3300DN only)> 4 Network setup (SP 3300DN only) This chapter gives you basic informatio n for setting up you r printer for network connections. This chapter includes: • Introduction • Supported operating sys tems • Using SetIP program Introduction Once you have connecte d your printer to a network with an RJ-45 E[...]

5 .1 < Loading pri nt media> 5 Loading print media This chapter will help you understand the types of paper you can use with your printer and how to properly load paper in the different paper trays for the best print quality . This chapter includes: • Selecting print media • Loading paper • Knowing a n output location Selecting print me[...]

5 .2 < Loading pri nt media> Supported sizes of p aper Print media for duplex printing Ty p e Siz e Dimensions Weig ht a a. If media weight is over 24 lb (90 g/m 2 ), use the manual feed. Capacity b b. Maximum capacity may differ depending on media weight, thickness, and environmental conditions. Plain paper Letter 216 x 279 mm (8.5 x 1 1 inc[...]

5 .3 < Loading pri nt media> Guidelines for selecting and storing print media When selecting or loadi ng paper , envel opes, or other print media, keep these guidelines in mind: • Always use print media that conform with the spec ifications listed on the next column. • Attempting to print on da mp, curled, wrinkl ed, or torn paper can cau[...]

5 .4 < Loading pri nt media> T ransparencies • T o avoid da maging the printer , use only transparencies designed for use in laser printers. • T ransparencies used in the printer must be able to withstand the machine’s fusing temperature. Check your machine’s specification to view the fusing temperature, see page 1 1.1. • Place them[...]

5 .5 < Loading pri nt media> Using the tray 1 or the optional tray 2 Use the print material you use for the majority of your prin t job s in the tray 1. The tray 1 can hold a maximum of 250 sh eets of 75 g/m 2 (20 lb) paper . Y ou can purchase an optional tray 2 an d attach it below the tray 1 to loa d an additional 250 sheets of paper . T o [...]

5 .6 < Loading pri nt media> Note s • Do not push th e paper width guide far enough to cause the material to warp. • If you do not adjust the paper wid th guide, it may cause p aper jams. Using manual feeder Y ou can manually load a sheet of prin t media in the manual tray if you select Manual Feeder in the Source option from the Paper ta[...]

5 .7 < Loading pri nt media> Knowing an output location The output tray collects paper face down, in the order in which the sheets were printed. Notes • If you continuously print many pa ges, the surface of the output tray may become hot. Be careful not to touch the surface, and especially keep children away from the surface. • The output[...]

6 .1 < Basic printing> 6 Basic printing This chapter explains common printing tasks. This chapter includes: • Printing a do cu men t • Canceling a print job Printing a document This printe r al low s yo u to pri nt fr om va ri ou s Wind o w s an d Ma cin t osh applications. The exact steps for printing a document may vary depending on the[...]

7 .1 < Supplies and accessories> 7 Supplies and accessories This chapter provides information on the toner cartridge and accessory that are available for yo ur printer . This chapter includes: • T oner cartridge • Accessory T oner cartridge When the tone r run s ou t, you can o rde r th e fo llowing type of toner cartridge for your printe[...]

8 .1 < Maintenanc e> 8 Maintenance This chapter provides information fo r maintaining your printer and the toner cartridge. This chapter includes: • Cleaning the printer • Maintaining the toner cartridge • Printing a configuratio n page • Maintenance part s Cleaning the printer During the printing process, paper , toner , and dust par[...]

8 .2 < Maintenanc e> 4 Gently swab the long strip of gl ass (LSU) inside the top of the cartridge and check for dirt or dust. 5 Hold the toner cartridge by th e handle and slowly insert th e cartridge into the o pening in the pri nter . T abs on the sides of the cartridge and correspondin g grooves within the printer will guide the cartridge [...]

8 .3 < Maintenanc e> Redistributing toner cartridge When the toner cartridge is near the end of its life span: • White streaks and light printing occur . • The S tatus Monitor program window appears on th e co mputer . •T h e Alert LED blinks red. If this happens, you ca n temporarily reestablish print quality b y redistributing the rem[...]

8 .4 < Maintenanc e> Replacing the toner cartridge When the toner is completely empty or the toner cartridge reached the end of its life span: • The printer stops printing. • The S tatus Monitor program window appears on th e co mputer . •T h e Alert LED blinks red. At this stage, the toner cartridge needs to be replaced. 1 Open the fro[...]

8 .5 < Maintenanc e> T abs on the sides of the cartridge and correspondin g grooves within the printer will guide the cartridge into th e corre ct position until it locks into place comple tely . 7 Close the front cover . Make sure that the cover is securely cl osed. Printing a configuration p age Y ou can print a configuration page to view c[...]

9 .1 < Troubleshooti ng> 9 Troubleshooting This chapter provides he lpful informat ion for what to do if you e ncounter an error while using your printer . This chapter includes: • Clearing paper jams • T rou bleshooting checklist • Solving gener al printing pro blems • Solving pri n t quality probl ems • Common Wi ndows problems ?[...]

9 .2 < Troubleshooti ng> 4 Pull the paper straight up and out. 5 Insert the trays back into the pr inter . Printing automatically resumes. In the manual tray 1 Remove the jamm ed p aper from the printer . 2 Open and close the front cover . 3 Load a paper into the manual feeder , then the printer resumes. Around the toner cartridge Note The fu[...]

9 .3 < Troubleshooti ng> In the p aper exit area 1 Open and close the front cover . T he jammed paper is automatically ejected from the printer . 2 Gently pull the paper out of the ou tput tray . If you do not see the jamm ed paper or if there is an y resi st ance when you pull, stop and go to the next step. 3 Open the rear cover . 4 Pull the[...]

9 .4 < Troubleshooti ng> Duplex jam 1 1 Open the rear cover . 2 Pull the guide rear on each side down an d re move the paper . Return the gu ide rear to its origina l position. 3 Close the rear cover. Printing auto mati cally resumes. Tip s for avoiding p aper jams By selecting the correct media types, most paper jams can be avoide d. When a [...]

9 .5 < Troubleshooti ng> T roubleshooting checklist If the printer is not working properly , consult the following checklist. If the printer does not pass a step, follow the corresponding suggested solutions. Condition Suggested solutions Make sure that the Online LED on the control panel lights green. • If the Onlin e LED is of f , che ck [...]

9 .6 < Troubleshooti ng> The printer does not print. (Continued) The printer may be configured incorrec tly . Check the printer properties to ensure that all of the print settings are correct. The printer driver may be incorre ctly installed. Reinstall the printer driver; See the Software Section. T ry printing a test page. The printer is mal[...]

9 .7 < Troubleshooti ng> Pages print, but are blank. The toner cartridge is defective or out of toner . Redistribu te the toner cartridge. See page 8.3. If necessary , replace the toner cartridge. See page 8.4. The file may have blank pages. Check the file to ensure that it does not contain blank pages. Some part s, such as the controller or [...]

9 .8 < Troubleshooti ng> V ertic al lines If black vertical streaks appear on the page: • The drum inside the toner cartridge has probably been scratched. Install a new toner cartridge. Se e page 8.4. If white vertical streaks appear on the page: • The surface of the LSU part inside the printer may be dirty . Clean the LSU . See page 8.2.[...]

9 .9 < Troubleshooti ng> Wrinkles or creases • Ensure that the paper is loaded properly . • Check the paper type and quality . See page 5.2. • T urn over the stack of paper in the tray . Also try rotating the paper 180° in the tray . Back of printouts are dirty • The transfer roller may be dirty . See page 8.1. • Check for leaking [...]

9 .10 < Troubleshooti ng> Common PostScript problems The following situations are PostScrip t language specific and may occur when several printer languages are bei ng used . Note • T o receive a printed or screen displayed message when PostScript errors occur , open the Print Options window and click the desired selection next to the PostS[...]

10 .1 < Installing accessories> 10 Installing accessories Y our machine is a full-featured mode l that has b een optimized to me et most of your printing needs. Recognizing that each user may have different requirements, however , manufacturer makes several accessories available to enhance your machi ne’s capabilities. This chapter includes[...]

10 .2 < Installing accessories> Activating the added memo ry in the PS printer properties After installing the memory module, you need to select it in the printer properties of the PostScript prin ter driver in order to use it. 1 Make sure tha t the PostScript printe r driver is installed on yo ur computer . For details about in stalling the [...]

11 .1 < Specifications> 11 Specifications Printer specifications Item Specifications and description Printing speed a Up to 28 ppm in A4 (30 ppm i n Letter) Duplex: 14 ipm in A4 (14.5 ipm in Letter) Resolution Up to 1200 x 1200 dpi ef fective output W arm-up time Less than 15 second s (From sleep mode) First print out time 8.5 seconds (From R[...]

1 Index C cleaning inside 8.1 outside 8.1 component location 1.2 configuration page, print 8.5 control panel LED 9.5 overview 1.3 D demo page, print 2.1 J jam, clear 9.1 L LED, meaning 1.3 loading paper tray 1/optional tray 2 5.5 M Macintosh problems 9.10 maintenance parts 8.5 manual feed mode, use 5.6 memory module installing 10 .1 N network opera[...]

Software section[...]

1 Sof tware section Content s 1. Installing Printer Software in Windows Installing Printer Software .............................. ................ ................ ................ ................ ....................... ................. 3 Installing Software for Local P rinting ............. ................ ................. ................ .[...]

2 Using Overlays ........ ................ ................ ................. ................... ................ ................ .... ...................... ... ... .... ... .. 21 What is an Overlay? ................ ................ ................ ................ ................... ................. ....... ............ ... ... ... . ... ..[...]

Installing Printer Software in Window s 3 1 Installing Printer Software in Windows This chapter includes: • Inst alling Printer Sof tware • Reinst alling Printer Sof tware • Removing Printer Software N OTE : The following procedure is based on Windows XP , for other operating systems, refer to the co rresponding Windows user's guide or o[...]

Installing Printer Software in Window s 4 4 Select T ypical installation for a local printer . Click Ne xt . N OTE : If your printer is not already connected to the comp uter , the following window will appear . • After connecting the printer, click Next . • If you don’t want to connect t he printer at this time, click Next , an d No on the f[...]

Installing Printer Software in Window s 5 3 Click Next . • If necessary , select a lang uag e from the drop-down list. • View User ’ s Guide : Allows you to view the User ’s Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automati cally install Adobe Acrobat Reader for you. 4 Select Custom installation[...]

Installing Printer Software in Window s 6 9 Click Finish . Inst alling Sof tware for Network Printing When you connect your printer to a network, you must first configure the TCP/IP settings for the printer . After you have assigned and verified the TCP/IP settings, you are ready to install the software on each computer on the network. Y ou can ins[...]

Installing Printer Software in Window s 7 • If you do not see your printer on the list, click Up date to refresh the list, or select Add TCP/IP Port to add your printer to the network. T o add the pri nter to the network, enter the port name and the IP a ddress for the printer . T o verify your printer ’s IP address or the MAC address, print a [...]

Installing Printer Software in Window s 8 5 The list of printers availa ble on the network appears. Select th e printer you want to install from the list and then click Next . • If you do not see your printer on the list, click Up date to refresh the list, or select Add TCP/IP Port to add your printer to the network. T o add the pri nter to the n[...]

Installing Printer Software in Window s 9 N OTE : After setup is complete, if your printer drive r doesn’t work properly , reinstall the printer driver . See “Reinstalling Printer Software” on page 9. Reinst alling Printer Sof t ware Y ou can reinstall the sof t ware if installation fails. 1 S tart Windows. 2 From the St a rt menu select Prog[...]

Installing Printer Software in Window s 10 Removing Printer Sof tware 1 S tart Windows. 2 From the St a rt menu select Programs or All Programs → SP 3300 Series → Maintenance . 3 Select Remove and click Next . Y ou will see a component list so that you can remove any item individually . 4 Select the components you want to remove and then click [...]

Basic Printing 11 2 Basic Printing This chapter explains the printi ng options and common printing tasks in Windows. This chapter includes: • Printing a Document • Printing to a file (PRN) • Printer Settin gs - Layout T ab - Paper T ab - Graphics T ab - Extras T ab - About T ab - Printer T ab - Using a Favorite Setting - Using Help Printing a[...]

Basic Printing 12 Printing to a file (PRN) Y ou will sometimes need to save the print dat a as a file for your purpose. T o create a file: 1 Check the Print to file box at the Print window . 2 Select the folder and assign a name of the file and then click OK. Printer Settings Y ou can use the printer properties window , which allows you to access a[...]

Basic Printing 13 Layout T ab The Layout tab provides options to adjust how the document appears on the printed page. The Layout Optio ns includes Multiple Pages per Side , Poster Printing and Booklet Printing . See “Printing a Document” on page 1 1 fo r more information on accessing printer properties. Paper Orient ation Paper Orientation allo[...]

Basic Printing 14 Color : 20 lb to 24 lb (75~90 g/m 2 ) color-backgrounded paper . Archive : If you need to keep print-out for a lon g period time such as archives, select this option. First Page This property allows you to print the first page using a different paper type from the rest of the document. Y ou can select the paper source for the firs[...]

Basic Printing 15 Advanced Options Y ou can set advanced settings by clicking the Advanced Options button. • T rueT ype Options : This op tion determines what the drive r tells the printer about how to image the text in your document. Select the appropriate setting according to the status of your document. - Download as Outlin e : When this opti [...]

Basic Printing 16 About T ab Use the About tab to display the copyright notice and the version number of the driver . See “Printi ng a Document” on page 1 1 for more information about accessing printer properties. Printer T ab If you access printer properties thr ough the Printers folder , you can view the Printer tab. Y ou can set the printer [...]

Advanced Printing 17 3 Advanced Printing This chapter explains printing options and advanced printing tasks. N OTE : • Y our printer driver Proper ties window that appears in this User ’s Guide may differ depending on the printer in use. However the composition of the printer properties wind ow is simi lar . • If you need to know the exa ct n[...]

Advanced Printing 18 Printing Posters This feature allows you to print a single-page document onto 4, 9, or 16 sheets of paper , for the purpose of pa sting the sheets together to form one poster-size document. N OTE : The poster printing option is avail able when 600 dpi is selected in the re solution option on the Graphic ta b. 1 T o change the p[...]

Advanced Printing 19 Printing on Both Sides of Paper Y ou can print on both sides of a sheet of paper . Before printing, decide how you want your document oriented. The options are: • Printer Setting , if you select this option, this feature is determined by the setting you’ve made on the control panel of the printer . • None • Long Edg e ,[...]

Advanced Printing 20 Using W atermarks The W atermark option allows you to pr int text over an existing document. For example, you may want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all p age s of a document. There are several predefined watermarks that come with the printer , a[...]

Advanced Printing 21 Using Overlays What is an Overlay? An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of preprinted forms and letterhead paper . Rather than using preprinted letterhead, you can create an overlay co[...]

Using Windows PostScript Driver 22 4 Using Windows PostScript Driver If you want to use the PostScript driver provided with the supplied CD-ROM to print a document. PPDs, in combination with the Po stScript driver , access printer features and allow the computer to commu nicate with the printer . An installation program for the PPDs is provided on [...]

Sharing the Printer Locally 23 5 Sharing the Printer Locally Y ou can connect the printer directly to a selected computer , which is called “host computer ,” on the network. The following procedure is for Windows XP . For other Windows OS, refer to the corresponding Windows User's Guide or online help. N OTES : • Check the O perating Sys[...]

Using Utility Applications 24 6 Using Utility Applications If an error occurs while printing, the S tatus Monito r window appears, showing the error . N OTES : • T o use this program, you need: - T o check for Operating System(s) that ar e com p at ible wit h your printer , refer to Printer S pecifications in you r Printer User Guide. - MAC OS X [...]

Using Your Printer w ith a Macintos h 25 7 Using Your Printer with a Macintosh Y our machine support s Macint osh systems with a built-in USB interface or a 10/100 Base-TX net work interface card. When you print a file from a Macintosh computer , you can use the PostScript driver by installing the PPD file. This chapter includes: • Inst alling So[...]

Using Your Printer w ith a Macintos h 26 Setting Up the Printer Set up for your printer will be different depending on which cable you use to connect the printer to your computer—the network cable or the USB cable. For a Network-connected Mac OS 8.6 ~ 9.2 1 Follow the instructions on “Ins talling Software” on page 25 to install the PPD file o[...]

Using Your Printer w ith a Macintos h 27 Printing N OTES : • The Macintosh printer ’s properties window that appears in this User ’s Guide may differ depending on the printer in use. However the composition of the printer properti es window is similar . • Y ou can check your printer name in the supplied CD-ROM. Printing a Document When you [...]

Using Your Printer w ith a Macintos h 28 Printer Features This tab provides options for selecting the p aper type and adjusting print quality . Select Printer Features from the Presets ' drop-down list to access the following features: • Reverse Duplex Printing : Allows you to select general print order compare to duplex print order . • Fi[...]

Using Your Printer w ith a Macintos h 29 Duplex Printing Y ou can print on both sides of the paper . Before printing in the duplex mode, decide on which edge you will be binding your finished document. The binding options are: Long-edge binding : Which is the conventional layout used in book binding. Short-edge binding : Which is the type often use[...]

30 Sof tware section Index A advanced printing, use 17 B booklet printing 18 D document, print Macintos h 27 Windows 11 double-sided prin ting 19 E Extras properties, set 15 F favorites settings, use 16 G Graphics properties, set 14 H help, use 16, 22 I image mode, set 14 install printer driver Macintos h 25 Windows 3 L Layout properties, set Windo[...]

31 U uninstall, software Windows 10 W watermark create 20 delete 20 edit 20 print 20[...]

M000-8650A[...]

Network Printer User ’ s Guide (SP 3300DN only)[...]

2 OpenSSL License Copyright (c) 1998-2001 The OpenSSL Project. All right s reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provide d that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditi ons and the following disc[...]

1 Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect , incidental or consequential damages as a result of handling or operating the machine. Copyright© 2008 • Microsoft, Windows, Windows 2000, Windows XP , Windows Vista, and Windows Server 2003 are registered trad emark[...]

2 Content s 1. Getting started Introduction .......... .................. .......... ........... .......... ........... .......... ......... ................ ......... ................ ... .............. ............... ... 1.1 Supported netw ork environments ............. .. .. ............... .. .............. .. ... .............. .. ...........[...]

3 5. EtherTalk environment EtherTalk prin ti ng ................ .. ............... .. .............. .. ............... ............... .. .............. ... ........ ............ ............... ............... ..... 5.1 Configuring EtherTalk .......... .. ............... .. .. ............... .. .. ............... .. .. .. ............... .. .. [...]

Getting started 1. 1 1 Getting started Introduction The Network Printer Card allows you to connect your printer directly to a network to share the printer among mult iple users. The printer functions as a network print server supporting various network environments, such as Windows 2000/XP/Vista, Windows Se rver 2003, and Macintosh 8.6 or higher . [...]

Programs supplied on the CD 2. 1 2 Programs supplied on the CD The CD-ROM supplied with your printer card provides you with: • Set IP : A utility program allowing you to select a network printer card and manually configure the addresse s for use with the TCP/IP protocol. System requirement s T o install SetIP , one of the following operating syst[...]

Programs supplied on the CD 2. 2 IP address setup Before using your network print server in your network, you must s et TCP/IP addresses for the print server . Y ou will need your printer card’s MAC address, IP address, subnet mask, and gateway address. First, check with your network administrator for the TCP/IP addresses. Note : The MAC address [...]

Print Driver Installation for Networked Printers 3. 1 3 Print Driver Installation for Networked Printers This chapter explains how to install the print drivers for networked printers. W orkstation Setup This section includes the setup procedures for the various Windows workstation environments. Windows V ista (TCP/IP) Note : Windows Vist a supports[...]

Print Driver Installation for Networked Printers 3. 2 Enter lp (in lower case) in the Queue Name field. Uncheck the box labelled LPR Byte Counting Enabled . Check the box labelled SNMP St atus Enabled . The Community Name should normally be set to “public” (unless you have configured the device to have a custom SNMP community name) and the SNMP[...]

Print Driver Installation for Networked Printers 3. 3 T est Print T o ensure the printer has been instal led on the network correctly a test print should be submitted from a client workstation. Pe rform the following steps: 1 Open a document on a client workst ation. 2 Select the SP 3300 Series as the printer for sending documents to. 3 Print the d[...]

TCP/IP environment 4. 1 4 TCP/IP environment A TCP/IP network provides you with various protocols for using printing devices and managing various types of networked devices. In this chapter , you will learn whic h management protocols are available in TCP/IP network environments, and how to print via your network print server using TCP/IP protocol.[...]

TCP/IP environment 4. 2 SLP Service Location Protocol (SLP) is an Internet standard network protocol that provides a framework to allo w networking applications to discover the existence, location, and configuration of networked services in enterprise networks, such as printers, Web servers, fax machines, video cameras, file systems, backup devices[...]

TCP/IP environment 4. 3 In the network print server 1 Configure the WINS server address thr ough Web Image Monitor SP 3300 Series. 2 Reboot the print server . The WINS server will update the printer's NetBIOS name in its database. Users can use the printer name instead of its IP address. Bonjour Bonjour allows for a network system to be easily[...]

TCP/IP environment 4. 4 Printing protocols Before setting the network printing ports, you must inst all the printer driver with the local port (LPT) on the system. Refer to your printer user’s guide. St andard TCP/IP port Y ou can print your document s to your network printer by creating a S tandard TCP/IP port. Configuring St andard TCP/IP in Wi[...]

TCP/IP environment 4. 5 6 When the port name displays in the Pr int to the following port list, click OK or Close . IPP port Internet Printing Protocol (IPP) al lows printing across the Internet, meaning that you can send a print job to your printer from a remote place if you are an Internet user , no matter what operating sy stem you use or where [...]

TCP/IP environment 4. 6 Additional functions The following are additional functions you can use through W eb Image Monitor SP 3300 Series. Printer properties sett ings Y ou can check and modify printer and document properties for an installed printer . For properties t hat are not supported by the printer driver , an error message indicating that t[...]

EtherTalk environment 5. 1 5 EtherTalk environment EtherT alk is AppleT alk used in an Et hernet network. This protocol is widely used in Macintosh network environments. Microsoft Windows system also supports this protocol. Li ke TCP/IP , EtherT alk also provides packet transmission and routing functionality . The network printer card works on Ethe[...]

EtherTalk environment 5. 2 TCP/IP printing Apple added TCP/IP printing to all ve rsions including and after OS 8.6. Note : Ensure that the Macintosh has version 8.6 or later . Earlier versions do not support TCP/IP printing as standard. An IP printer is a network printer tha t uses TCP/IP protocols (such as LPD/LPR, IPP , or Socket or Jet Direct) t[...]

Administration Tools 6. 1 6 Administration Tools This chapter explains how to confi gure or use the various administration tools found in SP 3300 Series. The fo llowing information is provided: Maintenance using Internet Services Enabling Internet Services 1 At a client workstati on on the network, launch the Internet Browser . 2 In the URL field, [...]

Appendix 7. 1 7 Appendix S pecifications OpenSSL S t atement s OpenSSL License Copyright © 1998-2000 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provide d that the following conditions are met: 1 Redistributions of source code must retain the above copyrig[...]

1 Index A Administration Tools Internet Services 6.1 B Bonjour 5.2 BOOTP 4.1 D DDNS 4.2 DHCP 4.1 E EtherTalk Bonjour 5.2 configuring EtherTalk 5.1 configuring the printer 5.1 TCP/IP printing 5.2 F Firmware upgrade 4.6 H HTTP 4.1 I Installing software 2.1 Internet Services Printer Status 6.1 Printing Reports 6.1 Upgrading Firmware 6.1 IP address set[...]

M000-8651[...]