Sears 315.10186 инструкция обслуживания

Operator's Manual 3/8 in. (10 mm) CORDLESS DRILL-DRIVER Vadable Speed / Reversible Model No. 315.101860 - 14.4 Volt Save this manual for future reference ,_ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 33[...]

• Warranty ........................................................................................................................................................................... 2 I Introduction ....................................................................................................................................................[...]

_i WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS, Failure to follow all instruCtions listed below, may result in electric shock, fire and/or seriouspersonal iniury. SAVE THESE INSTRUCTIONS WORKAREA • Keep your work area clean and well lit. Cluttered benches and dark areas Invite accidents. • Do not operate power tools in explcelve atmo- spheres[...]

SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenancepedormed by unqualifiedpersonnel couldresult in e risk of injury. • When servlclng s tool, use only identical replace- ment parts. Follow Instructions In the Maintenance section of this manuel. Use of unauthorized parts or failure to follow Malnle[...]

,A WARNINGI READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to followall Instructions listed below, may re.suit in etect_ shock, fire and/or serious personal injury. • Before using battery charger, read all instructions and nautlonary markings In this manual, on battery charger, battery, and product using batteryto prevent misuse of the products an[...]

i Important: Some of the following symbols may be used on this tool. Please studythem and learn their meaning. Proper Interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cyctesper second) W Watt Power mln Minutes Time Alternati[...]

PRODUCT SPECIFICATIONS Chuck ........................................... 3/8 in. (10 ram) Keyless Motor .............................................................. 14.4 Volt DC Switch ....................................................... Vadab[e Speed Gear Train ............................................................. 1 Speed No Load Spee[...]

TORQUE ADJUSTMENT RING KEYLES8 CHUCK BIT STORAGE CHARQER ASSEMBLY TRIGOER ROTATION SELECTOR (FORWARD/REVERSE) BAI-r ERY Fig. 1 INSTRUCTIONS When unpacking the tool: • Carefully remove the tool and accassodes from the box. • Make sure that all items listed in the packing list are in- cluded. • Inspect the tool carefully to make sure no breakag[...]

WARNING: Do not allow familiarity with your drill- df',ver to make you careless. Remember that a careless fraction of a second is sufficient to _nffict severe Injury. CHARGING YOUR DRILL-DRIVER The battery pack for this tool has been shipped In e low charge condition to prevent passible problems. Therefore, you should charge It at least 6 hour[...]

BATrERT PACK BATrlERY PORT To stop, release switchtrigger and allow the chuck to come to a complete stop. _1= WARNING: Battery tools ere always in operating cond_on. Therefore, switch should always be locked when not In use or when cerwIng at your side. DIRECTION OF ROTAllON SELECTOR (FORWARD / REVERSE) REVERSE ! FORWARD CENTER POSITION (lOCK) SWIT[...]

SCREW'DRIVING TORQUE ADJUSTMENT (Driving power of your drill-driver) When using your drill-driver for varlous driving applica- tions, it becomes necessary to increase or decrease the torque in order to help prevent the possibility of damaging screw heads, threads, workplace, etc. In general, torque should correspond to the intensity of the scr[...]

INSTALLING BITS • Place the direction of rotation celector in center position. See Figure 5. This will turn off the power to your drill. • Open or close the chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from falling out of the chuck ja[...]

_1= WARNING: Always wear safety goggles or safety glasses with side shields when operatingtool, Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury, DRILLING See Figure 11. When drillinghard, smooth surfaces, usa a canter punch to mark the desired hole Iocallon. This wff!prevent the ddl[ bit fr[...]

CHUCK REMOVAL See Figures 12 - 14. • Lockthe swiLch trigger by plscing the direction of retation selector in center position. See Figure 5. • Insert a 5/15 inch or larger hex kay Into the chuck of your ddtt and [_ghten the chuck jews sscumly. • Tap the hax key sharply with a mallet in a clockwise direction. See Figure 12. This will loosen the[...]

_lb WARNING: When servicing, use only identical Craftsman replacement perts. Use of any other pert may create a hazard or cause product damage. Do not abuse power tools. Abusive practices can damage tool as wall as workplace. ,_, WARNING: Always remove the battery pack from the tool when assembling parts, making adiustments, cleaning or when not In[...]

16[...]

COMPANION 14.4 VOLT CORDLESS DRILL MODEL NO, 315.101860 I The model number will be found on a plate attached to the motor housing. Always mention the model ] number in all correspondenceregarding your CORDLESS DRILL-DRIVER or when ordering repair parts, SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 1 4 Key PaR No, Number 1 660120O01 2 690033022 3[...]

COMPANION 3/8 In. 14.4VOLT CORDLESS DRILL-DRIVER - MODEL NUMBER 315.101860 14 %, : 9 15 13 10 11 P 12 _ 14 6 8 7 5 3 4 2 1[...]

COMPANION 3/8 In. 14.4 VOLT CORDLESS DRILL-DRIVER - MODEL NUMBER 315.101860 The model number will be found on a plate attached to re motor housing. Always mention the model number In all correspondenceregarding your | | CORDLESS DRILL-DRIVER or when ordering repair parts. J KEY PART NO. NUMBER 1 6620501 2 6320801 3 6722101 4 5267710 5 6759001 6 365[...]

COMPANION 3/8 In. 14.4 VOLT CORDLESS DRILL-DRIVER - MODEL NUMBER 315.101860 BLUE LEAD RED LEAD BLACK LEAD RED BLACK LEAD BLACK LEAD HEAT SINK WIRING DIAGRAM[...]

Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it] For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door o[...]