Sears 32L4200U инструкция обслуживания

GMA300009010 1/12 Note: T o display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Defin ition TV broadcast, a High Definition digit al cable program, or a High Definition digital satellite program). For d etails, contact you r TV antenna installer , cable provider , or satellite provider[...]

2 5.375 x 8.375 ver 2.3 Dear Customer , Thank you for purchasing this T oshiba LED TV . This manual will help you use the many exciting features of your new LED TV . Before operating your LED TV , carefully read this manual completely . WARN ING T o prevent injury , this apparatus must be securely attach ed to the floor/wall in accordance with t he[...]

3 5.375 x 8.375 ver 2.3 Im p orta n t Safety I n structio n s 1) Read these instructions . 2) Keep these instructions . 3) Heed all war nings . 4) Follow all instru ctions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth . 7) Do not block any ventilation openings . Install in accordance with the manufacture r ’s instructio[...]

4 5.375 x 8.375 ver 2.3 24) When selecting a location for the TV , • NEVER allow any part of th e TV to hang over the edge of the suppor ting furniture, • NEVER place the TV on tall fu rniture (for example, ente rtainment cen ters or bookca ses) without anchoring both the fu rniture and the TV to a suitabl e support, • Never place cloth or ot[...]

5 5.375 x 8.375 ver 2.3 38) W ARNING: RISK OF ELE CTRIC SHOCK ! Never spill liquids or push objects of any kind into the TV cabinet slot s. 39) During a lightening storm, do not touch the connecting cabl es or prod uct. 40) For added protecti on of your TV from lightning and power surges, always unplug the power cord and disconnect the antenn a fro[...]

6 5.375 x 8.375 ver 2.3 Removing the Pedest al St and 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand prot ruding over the edge of the surface. Note : Extreme care sh ould always be used when removing the pedest al stand to avoid damage to the LCD panel. 2) Remove the scr ews[...]

7 5.375 x 8.375 ver 2.3 FCC Declaration of Conformity Compliance Statement (Part 15): T oshiba 19L4200U, 24L4200U, 32L4200U, 40L5200U, 46L5200U, 50L52 00U T elevision models comply with Part 15 of the FCC Rules. Operation is subject to the following two conditio ns: (1) This device may not cause harmful interference, and (2) This device must accept[...]

8 5.375 x 8.375 ver 2.3 T rademark Information • ClearFrame, C ableClear , ColorStream, DynaLight, GameTimer , SurfLock are trademarks or registere d trademarks of T oshiba Am erica Information Systems, Inc. and/or T oshiba C orporation. • Audyssey EQ ® provides clear , accurate, and natural sound right out of the box. This technology ensures [...]

9 5.375 x 8.3 75 ver 2.3 Contents Chapter 1: Introduction ... ......................... ..................... ............. 15 Features ..................................................................16 Overview of installation, setup, and use ..................17 TV front and side panel controls and connections ..................................[...]

10 Con t en t s 5.375 x 8.3 75 ver 2.3 Connecting a VCR, antenna, cable TV, or camcorder .........................................................24 Connecting a DVD player with Color S tream ® (component video), and a satellite receiver ....... 25 Connecting an HDMI ® or DVI device to the HDMI ® input............................................[...]

11 Con t en t s 5.375 x 8.3 75 ver 2.3 Chapter 6: Using the TV’ s features .............. ............................. 59 S electing the video input source ............................. 59 Labeling the video input sources ............................61 Tuning channels using the Channel Browser ..........64 Favorites browser .....................[...]

12 Con t en t s 5.375 x 8.3 75 ver 2.3 CC S elector .......................................................82 Adjusting the audio ................................................. 83 Muting the sound ..............................................83 Using the digital audio selector ......................... 83 S electing stereo/ S AP broadcasts ....[...]

13 Con t en t s 5.375 x 8.3 75 ver 2.3 S orting photo or music files ...........................106 S etting the sleep timer .......................................... 107 Automatic Power Down ........................................ 108 No S ignal Power Down .........................................108 Using HDMI ® -CEC...........................[...]

14 Con t en t s 5.375 x 8.3 75 ver 2.3 Appendix A: S pecifications ...................................................... 126 Television system .................................................126 Channel coverage ..................................................126 Power source ........................................................127 Power max[...]

15 Chap t e r 1 Introduction Safe t y icons This manual contains safety instructions that must be observed to a void potential hazards that could result in personal injuri es, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight th ese instructions as fol[...]

16 In tr oduc t ion Fe a t u r e s Fea t u r es The follo wing are just a fe w of th e many e x citing features of your new T o shiba wide screen, in tegrated HD, LED TV : ❖ Integrated digital tu ning (8VSB A TSC and QAM) — Eliminates the n eed for a separate d igital conv er ter set-top box (in most cases). ❖ 1366 x 768 output resolution 19L[...]

17 In tr oduc t ion Overview of installation, setup, and use Ove r view of ins t alla t ion, se t up, and use Follo w these steps to set up your TV and begin using its many exciting features. 1 Carefully read the importan t safety , installation, care, and service information. Keep this manual for future reference. 2 T o choose a location for the T[...]

18 In tr oduc t ion TV fr ont and side panel contr ols and conn ections 10 Program channels into the TV’ s channel memory , see “A u t o T uning” on page 51 . 11 For details on using the TV’ s features, see chapters 6 and 7. 12 For hel p, refer to “T rou bleshooting” on page 120 . 13 For technical specif ications, see “Sp ecifications[...]

19 In tr oduc t ion TV bac k panel connections 3 PO WER —T urns the TV On/Off . If the TV stops responding to the buttons on the remote control or TV control pan el and you cannot turn off the TV , press and hold the PO WER button on the TV control panel for a few seconds to reset the TV . 4 ARRO WS // / —When a menu is onscreen, these buttons [...]

20 In tr oduc t ion TV bac k panel connections (Sample Illustration) L5200 U Series back panel conn ections 1 PC IN —Connects a personal computer . 2 HDMI ® IN —High-Definition Multi media Interface input recei ves digital audio and uncomp ressed digital vi deo from an HDMI ® device or uncompressed digital video from a DVI device. HDMI ® con[...]

21 Chap t e r 2 Connecting Y our TV Ove r view of cable t ypes Before purchasing cables, know the connector types your de vices require. Y ou can purchase cables from most st ores that sell audio/video devices. Coaxial (F- t ype) cable (Sample Illustration) Coaxial cable Coaxial (F-type) cable connects you r antenna, cable TV service, and/or cable [...]

22 Connec t ing Y ou r TV Overview of cable types S t anda r d A/V cables ( r ed/whi t e/y ellow) (Sample Illustration) Standard A V cables Standard A/V cables (composite video) usually come in sets of three, and connects to video de vices with analog audio and composite video outpu t. These cables (and th e related inputs on your TV) are typically[...]

23 Connec t ing Y ou r TV Overview of cable types HDMI ® cables provide the best audio and picture quality . Op t ical audio cable (Sample Illustration) Optical audio cable Optical audio cable connects receiv ers with Dolby ® Digital or PCM (pulse-code modulation ) optical audio input to the TV’ s Digital Au d i o O u t terminal, see “Connect[...]

24 Connec t ing Y ou r TV Connecting a VCR, antenna, cable TV , or camcorder Connec t ing a VCR, an t enna, cable TV , o r camco r de r (Sample Illustration) L4200 U Series—Connecting to a VCR, antenna, or cable TV or camcor der (Sample Illustration) L5200 U Series—Connecting to a VCR, antenna, or cable TV or camcor der Items needed: ❖ Coaxia[...]

25 Connec t ing Y ou r TV Connecting a D VD player with ColorStream ® (component When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV . When you use ColorStream ® HD or Video, switch A V input mode appropriately . T o view the antenna or cable signal: Select ANT/CABLE video input [...]

26 Connec t ing Y ou r TV Connecting a D VD pla yer with ColorStr eam ® (component ColorStream ® and composite video cables cannot be connected simultaneously . (Sample Illustration) L5200U S e ries—Satellite r eceiver with component video or D V D player with component video Items needed: ❖ Coaxial cables ❖ Standard A V cables If you hav e[...]

27 Connec t ing Y ou r TV Connecting a D VD player with ColorStream ® (component ❖ If your D VD player or sate llite receiv er does not have component video, connect a standard A/V cable to the A UDIO/VIDEO terminal. If your DVD player has HDMI ® video, see “Connecting an HDMI® or DVI de vice to the HDMI® input” on page 28 . When you use [...]

28 Connec t ing Y ou r TV Connecting an HDMI® or DVI de vice to the HDMI® input Connec t ing an HDMI ® o r DVI device t o t he HDMI ® inpu t The HDMI ® input on your TV receives digital audio and uncompressed digital video from an HDMI ® source device, or uncompressed digital video from a D VI (Digital V isual Interface) source de vice. This [...]

29 Connec t ing Y ou r TV Connecting an HDMI® or D VI device to the HDMI® input (Sample Illustration) L5200 U Series—HDMI ® connections T o view the HDMI ® device video: Select HDMI 1 , HDMI 2 , or HDMI 3 (for L5200U Series) video input source on the TV . (Press the INPUT button on the remote control. For more information, see “Selecting th[...]

30 Connec t ing Y ou r TV Connecting an HDMI® or DVI de vice to the HDMI® input For more in formation, see “Setting the HDMI® audio mode” on page 55 (Sample Illustration) L4200 U Series—D VI connections (Sample Illustration) L5200 U Series—D VI connections TV back panel Playback device TV back pan el Playback device[...]

31 Connec t ing Y ou r TV HDMI®-CEC connection T o ensure that the HDMI ® or DVI device is reset properly: ❖ When turning on your electronic components, turn on the TV first, and then the HDMI ® or DVI device. ❖ When turning off your electronic components, turn off the HDMI ® or DVI device first, and then the TV . EIA/CEA-861-D compliance c[...]

32 Connec t ing Y ou r TV HDMI®-CEC connection (Sample Illustration) L5200 U Series—HDMI ® -CEC compatible audio r eceiver and playback device connections T o connect an HDMI ® device, you will need one HDMI ® cable (type A connector) per HDMI ® device (see “Overvie w of cable types” on page 21 ). ❖ If several devices are connected, HD[...]

33 Connec t ing Y ou r TV Connecting a digital audio system Connec t ing a digi t al audio sys t em The TV’ s DIGIT AL A UDIO OUT terminal outputs a Dolby ® Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby Digital decoder or other external audio system with optical audio input. Y ou will need an O[...]

34 Connec t ing Y ou r TV Connecting a digital audio system 4 Press the ( / arro w) buttons to select Digi tal Output Fo r m a t . 5 Press the ( / arro w) buttons to select either Dolby Digital or PCM , depending on y our de vice, see “ Audyssey ABX™” on page 86 . (Sample Image) Audio Setup scr een - Done 6 T o sav e the new settings, highlig[...]

35 Connec t ing Y ou r TV Connecting an analog audio system Connec t ing an analog audio sys t em This connection allows you to use ex ternal speaker with an external analog audio amplifier to adjust the le vel. Y ou will need standard audio cables. (Sample Illustration) L4200/L5200 U Series—Connecting an analog audio system Connec t ing a compu [...]

36 Connec t ing Y ou r TV Connecting a computer (Sample Illustration) L4200 U Series Comput er connections (Sample Illustration) L5200 U Series Comput er connections Computer PC audio output PC audio cabl e TV back panel Conversion adaptor (if necessar y) TV back panel PC audio cable PC audio output Computer Conversion adaptor (if necessa ry)[...]

37 Connec t ing Y ou r TV Connecting a computer T o use a computer, set the monitor output resoluti on on the computer before connect ing it to the TV . The supported signal formats are VGA, SVGA, XGA, WXGA and SXGA. For detailed signal specifications, see “ Acceptable signal formats for PC IN, HDMI®” on page 130 . Other formats or non-stand a[...]

38 Connec t ing Y ou r TV Connecting a computer (Sample Illustration) L4200 U Series Connecti ons to HDMI ® terminal (Sample Illustration) L5200 U Series Connecti ons to HDMI ® terminal TV back panel PC audio c able PC audio o utput HDMI ® to DVI adapter cable Computer TV back panel PC audio cable PC audio output HDMI ® to DVI adapter cable Com[...]

39 Connec t ing Y ou r TV Connecting a computer The supported signal fo rmats are VGA, SV GA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60H z), 720p (60Hz), 1080i (60H z), and 1080p (24Hz/60Hz). For signal specifications, see “ Acceptable signal formats for PC IN, HDMI®” on page 13 0 . ❖ The edges of the picture may be hidden. ❖ If receiving a 4[...]

40 Chap t e r 3 Using the Remote Control Ins t alling ba tt e r ies T o install batteries: 1 Remov e the battery cover from th e back of the remote control. (Sample Illustration) Removing the r emote back cover 2 Insert two AAA batteries, corresponding to the (+) and (-) markings on the battery compartm ent. (Sample Illustration) Installing th e ba[...]

41 Using t he Remo t e Con tr ol Remote contr ol effective r ange ❖ Be sure to use AAA size batteries. ❖ Dispose of batteries in a designated disposal area. ❖ Always consider the environment when disposing of batteries. Always follow applicable laws and regulations. ❖ If the remote does not operate co rrectly , or if the operating range is [...]

42 Using t he Rem o t e Con tr ol Learning about the r emote contr ol Lea r ning abou t t he r emo t e con tr ol The buttons used for operating the TV are described below . For the HDMI ® -CEC remote control fu nctions, see “HDMI®-CEC playback device (D VD player , etc.) control” on page 109 . (Sample Illustration) Re mote contr ol overview T[...]

43 Using t he Remo t e Con tr ol Learning about the remote contr ol 1 The PO WER button turns the TV On/Off . When the TV is on, the power LED indicator on the TV front glows green. 2 The PIC SIZE b u tton cycles through the picture sizes, see “Selecting the picture size” on page 70 . 3 The PIC MODE bu tton selects the picture mode, see “Sele[...]

44 Using t he Rem o t e Con tr ol Learning about the r emote contr ol 18 The Arrow buttons ( / / / ) select or adjust programming menus when a menu is on-screen. 19 The Arrow buttons ( / ) open the Channel Browser and tune to the previous/next channel in the channel history when TV programming is on-screen. See “T uning channels using the Channel[...]

45 Chap t e r 4 Menu Layout and Navigation Main menu layou t The tables below and on the ne xt pages provide a quick overvie w of your TV’ s menu system . T o open the Installation menu s (illustrated below), press MENU on the remote control or TV control panel. Icon Item Option Picture Mode Dynamic/Standard/Movie/PC/Preference Picture Settings O[...]

46 Menu Layou t and Naviga t ion Main menu layout Preferences CC Selector Launches the temporary CC Selector Base CC Mode Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4 Digital CC Settings Opens the Digital CC Setup menu Input Labeling Opens the Input Labeling menu A V Input Selects ColorStream HD/Video input Menu Language English/Français/Español Channel Brows[...]

47 Menu Layou t and Naviga t io n Setup/Installation me nu layout Se t up /Ins t alla t ion menu layou t The Installation menu contains th e T errestrial and System Status menus. T o open the Installat ion menu, press the MENU button on the remote control or TV control panel, open the Setup menu, select Installation , and then press the ENTER b utt[...]

48 Menu Layou t and Naviga t ion Navigating th e menu system 3 Press the ENTER b utton t o sav e your menu settin gs or select a highlighted item. A highlighted menu item appears in a different color in the menu. 4 All menus close automatically if you do not make a selection within approximately 60 seco nds, except the signal meter menu, which clos[...]

49 Chap t e r 5 S etting up your TV Ini t ial Se t up When you f irst turn on or reset the TV , the Initial Setup win dow will appear . 1 In the M enu Langua ge field, pres s the ( / arro w) buttons to select your preferred language. 2 Press the ( / arro w) buttons to select Tim e Z o ne S et u p . Then set your desired time zone, using the ( / arr[...]

50 Se tt ing up you r TV Initial Setup Menu language Y ou can choose from three dif ferent menu language settings (English, Français, and Español) fo r the on-screen display of menus and messages. T o select the me nu language: 1 Press t h e MENU button and open the Prefer ences menu, and highlight Menu La nguage . 2 Press the ( / arro w) bu tton[...]

51 Se tt ing up you r TV Storing channels in memory (optional) 3 Open the T errestrial me nu, highl ight Inpu t Conf iguration , and then press the ENTER button. (Sample Image) T err estrial menu - Input C onfigur ation selection 4 Highlight ANT/CABLE In and press the ( / arrow) b u ttons to select the input source ( Cable or Antenna ). (Sample Ima[...]

52 Se tt ing up you r TV Storing channels in memory (optional) ❖ Y ou must set up the ANT/CABLE input source before programming channels. See “ANT/CABLE IN” on page 50 . ❖ The automatic channel progr amming process will erase channels that were previously programmed into the TV’ s memory . ❖ T o tune the TV to a channel not programmed i[...]

53 Se tt ing up you r TV Storing channels in memory (optional) A new set of Installation menu icons appears. 4 Open the T errestrial me nu, highl ight Channel Pr ogra m to open the Start Scan window , and then press the ENTER button to begin channel programming. (Sample Image) T errestrial menu - Channel Pr ogram selection (Sample Image) Auto tunin[...]

54 Se tt ing up you r TV Setting channel skip Se tt ing channel skip T o prev ent a channel from being viewed, you can set it to be skipped. 1 From the Set up menu, highlight Installation , and then press the ENTER button. 2 Press the ( / arrow) b uttons to select Channel O ptions , and then press t h e ENTER butt o n. The list of channels appears.[...]

55 Se tt ing up you r TV Setting the A V input mode Skipped channels cannot be selected with the CH arrow buttons; however , they can be accessed using the number keys on the remote control. If an encrypted channel is accident ally added to the channel list while programming channels, y ou can remove the unw anted encrypted (non-vie wable) channel [...]

56 Se tt ing up you r TV V iewing the digital signal meter mode.) See “Connecting an HDMI® or D VI device to the HDMI® input” on page 28 . (Sample Image) HDMI ® A udio mode selection 4 T o sav e the setting, highlight Done , and then press the ENTER button. Because the PC and HDMI 1 inputs share the same set of anal og audio inputs, the PC A[...]

57 Se tt ing up you r TV Setting the time zone 2 Highlight Installation , and then press the ENTER button. A new set of Installation menu icon s appears. 3 Open the T errestrial me nu, highl ight Signal Meter , and then press the ENTER button. 4 Press the ( / / / arrow) buttons to select the antenna input and digital channel signal you wish to chec[...]

58 Se tt ing up you r TV V iewing the system status 3 Open the System Status menu, highlight System Information , and then press the ENTER b utton. 4 Press the ( / arrow) buttons to scroll through the menu bar to select Fac t o r y D e f a u lt s or Support Inf ormation . The related information appears. T o close the screen and retu rn to the Inst[...]

59 Chap t e r 6 Using the TV’ s f e a t u r e s Selec t ing t he video inpu t sou r ce T o select the video input source to view: 1 Press t h e INPUT button on the remote control or TV control panel. 2 Do one of the following: ❖ Press 0-4 (L4200U Series) or 0-5 (L5200U Series). ❖ Repeatedly press the ( / arrow) b uttons on the remote control,[...]

60 Using t he TV ’ s fe a t u r es Selecting the video input sour ce ❖ Repeatedly press the INPUT b utton on the remote con trol or TV control panel to change the input setti ng. The current signal source displays in the top right corner of th e Input Selection screen. (Sample Image) L4200U Series Input Selection scr een (Sample Image) L5200U S[...]

61 Using t he TV’ s fea t u r es Labeling the video input sour ces If a HDMI ® -CEC device with HDMI ® switchin g capability (e.g. Audio Recei ver) is connected to the HDMI ® input, press the INPUT button on the remote control or TV control panel repeatedly to high light HDMI 1 or HDMI 2 . If the connected CEC de vice has any connected de vice[...]

62 Using t he TV ’ s fe a t u r es Labeling the video input sources ❖ V ideo Recorder ❖ Hide (to hide an unu sed input in the Inpu t Selection screen and in the Channel Browser Inputs list) If you select PC in the Input Selection screen, you can choose only “– –”, “Game Console”, or “Hide” as the label. T o label the video inp[...]

63 Using the TV’ s features Labeling the video input sour ces (Sample Image) L5200U Series Input Labeling screen 5 T o sav e the new input labels, highligh t Done , and then press the ENTER button. T o rev ert to the factory default labels, highl ight Reset and press the ENTER button. Input labeling example: The screen belo w left shows the def a[...]

64 Using t he TV ’ s fe a t u r es T unin g channels using the Channel Br owser (Sample Image) L5200U - Input selection scr eens T o clear the input labels: 1 Press t h e MENU button and open the Pr eferences menu. 2 Highlight Inpu t Labeling , and then press the ENTER button. 3 Highlight Reset , and then press the ENTER button. T uning channels [...]

65 Using t he TV’ s fea t u r es T u ning channels using the Channel Br owser Favo r i t es b r owse r The Fa vorites Bro wser allows you to quickly set up a fa vorite channels/inputs list that is integrated into the Chan nel Browser . T o add a fav orite channel/input: 1 T une to the channel or input . 2 Press and hold the FA V button for a fe w[...]

66 Using t he TV ’ s fe a t u r es T unin g channels using the Channel Br owser 5 Press the ( arrow) b utton to highlig ht Inputs List , and then press the ( / arrow) b uttons to select On or Off . 6 Press the ( arrow) b utton to highlig ht Fa vorites List , and then press the ( / arrow) b uttons to select On or Off . 7 Press the ( arrow) b utton[...]

67 Using t he TV’ s fea t u r es T u ning channels using the Channel Br owser 3 Channel or input currently bei ng viewed. 4 Channel or input that is currentl y highlighted in the browser . 5 Channels stored in the History List. T o toggle among t he av ailable lists: After opening the Channel Browser , press the ( / arrow) b uttons to toggle thro[...]

68 Using t he TV ’ s fe a t u r es T unin g channels using the Channel Br owser Adding and clea r ing channels and inpu t s in t he His t o r y Lis t As a channel or input is tuned, the Channel Browser adds it to the History Li st and disp lays it on the right si de of the Chan nel Browser . Previously tuned channels/inputs are shi fted to the le[...]

69 Using t he TV’ s fea t u r es T u ning channels using the Channel Br owser T uning t o a specific channel (p r og r ammed o r unp r og r ammed) T o tune analog channels: Press the Channel Number (0–9) on the remot e control. F or example, to select ch annel 125, press 1, 2, 5, and then press the ENTER button. T uning d igital channels: Press[...]

70 Using t he TV ’ s fe a t u r es Selecting the pictur e size 2 Press and hold the CH R TN button for a few seconds until the message “Memorized” appears on the screen. The channel has been programmed to the CH R TN button. 3 Y ou can then change channels repeatedly , and when you press the CH R TN button, the memorized channel will be tuned[...]

71 Using t he TV’ s fea t u r es Selecting the picture size T o select the picture size using the menus: 1 Select Picture Size in the Theater Settings menu. 2 Press the ( / arrow) buttons to select the desired picture size setting. 3 Highlight Done , and then press the ENTER button. Some of the picture sizes may not be available depending on the [...]

72 Using t he TV ’ s fe a t u r es Selecting the pictur e size The Full setting is for v iewing in 1080i, 1080p, and 720p prog ram source. (Sample Illustration) Picture size - Full The edges of the picture may be hidden. Thea t e r Wide 1 This setting is for viewing in 4:3 format programs. (Sample Illustration) Pict ure size - TheaterW ide 1 The [...]

73 Using t he TV’ s fea t u r es Selecting the picture size Thea t e r Wide 3 This setting is for viewing letter box programs with subtitles. (Sample Illustration) Pictur e size - TheaterW ide 3 , letter box with subtitles The picture’ s top and bot tom edges are hidden*. * T o view the hidden areas (suc h as subtitles or captions), see “Scro[...]

74 Using t he TV ’ s fe a t u r es Selecting the pictur e size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display wi th sidebars and/or bars at the top and bottom . No r mal This setting is for viewing VGA, SV GA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size - Normal This size is a non-stretched disp[...]

75 Using t he TV’ s fea t u r es Scr olling the TheaterW ide® pictur e (TheaterW ide 2 and 3 only) Sc r olling t he Thea t e r Wide ® pic t u r e (Thea t e r Wide 2 and 3 only) Y ou can set separate scroll settings for the TheaterW ide 2 and TheaterW ide 3 modes for each input. T o set the scroll settings: 1 Press the MENU button and open the P[...]

76 Using t he TV ’ s fe a t u r es Using the A uto Aspect featur e Using t he Au t o Aspec t fea t u r e When this feature is set to On, th e TV will automatically select the picture size when one of the following input sources is recei ved: ❖ A 480i, 480p, 720p, 1080i digit al signal from the ANT/CABLE input ❖ A 480i signal from the ColorStr[...]

77 Using t he TV’ s fea t u r es Selecting the cinema mode Selec t ing t he cinema mode When you view a D V D (3:2 pulldown processed) from a D VD player connected to the VIDEO , ColorStr eam ® HD (component video), or HDMI ® inputs on the TV , smoother motion can be obtained by setting the Cinema Mode to Film . T o set the Cinema Mode to Fil m[...]

78 Using t he TV ’ s fe a t u r es Adjusting the pictur e Adjus t ing t he pic t u r e Selec t ing t he pic t u r e mode Y ou can select your desir ed picture settings from the modes described below . PC mode is available for HDMI ® and PC inputs only (grayed out for other input sources). T o select the picture mode using the menu system: 1 Pres[...]

79 Using t he TV’ s fea t u r es Adjusting the pictur e 3 Press the ( / arrow) b uttons to sel ect the picture mode you prefer , and then press the ENTER button. (Sample Image) Mode selections scr een Adjus t ing t he pic t u r e quali t y Y ou can adjust the picture quality (Contrast, Backlight, DynaLight™, Brightness, Color, T int, and Sharpn[...]

80 Using t he TV ’ s fe a t u r es Using closed captions 3 Press the ( / arrow) buttons to select the picture quality you wish to adjust (C ontrast, Backlight, DynaLig ht, Brightness, Color , Tint, or Sharpness), and then press the ( / arrow) buttons to adjust the setting. 4 T o sav e the new settings, highlight Done , and then press the ENTER bu[...]

81 Using t he TV’ s fea t u r es Using closed captions If the program or video you selected is not closed captione d, no captions will display onscreen. T o view text, highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Captions - text If text is not available in your area, a black rectangle may a ppear on screen. If this happens, set the Base[...]

82 Using t he TV ’ s fe a t u r es Using closed captions 3 Press the ( / arrow) b uttons to highl ight the characteristic you wish to change, and then press the ( / arrow) buttons to select the format for that characteristic. 4 T o sav e the new settings, highlight Done , and then press the ENTER button. T o rev ert to th e factory defaults, high[...]

83 Using t he TV’ s fea t u r es Adjusting the audio 4 T o sav e the new settings, highlight Done , and then press the ENTER button. 5 Press the EXIT button. Adjus t ing t he audio Mu t ing t he sound Press the MUTE button to partially reduce (1/2 Mute) or turn of f (Mute) the sound. E ach time you press the MUTE button, the mute mode changes in [...]

84 Using t he TV ’ s fe a t u r es Adjusting the audio 2 Highlight Digital A udio Selector , and then press the ENTER button. (Sample Image) Sound menu - Digital Audio Selector selection 3 Press the ( / arrow) b uttons to select Au d i o , and then press the ( / arrow) b uttons to select the desired service. 4 Press the EXIT button. Selec t ing s[...]

85 Using t he TV’ s fea t u r es Adjusting the audio T o listen to an alternate language on an A T SC digital station (if av ailable), h ighlight the Language field in step 3 above, and then press the ( / arrow) b utt ons to select the language you prefer . T o listen to a second audio program on an analog station, if av ailable, select SAP in st[...]

86 Using t he TV ’ s fe a t u r es Adjusting the audio Audyssey ABX™ Audyssey ABX™ technology uses sophisticated driv er analysis and low frequenc y monitoring to extend the range and bass of small speakers. T o turn on Audyssey ABX™: 1 Press the MENU bu tton and open the Sound menu. 2 Highlight A udio Settings , and the press the ENTER but[...]

87 Using t he TV’ s fea t u r es Using the Locks menu 4 T o sav e the new settings, highlight Done , and then press the ENTER button. T o reset the settings to the factory defaults, highlight Reset , and then press the ENTER button. Using t he Dolby ® Digi t al Dynamic Range Con tr ol fea t u r e Y ou can furth er compress Dolby Digital dynamic [...]

88 Using t he TV ’ s fe a t u r es Using the Loc ks menu En t e r ing t he PIN code 1 Press t h e MENU button and highlight the Locks menu icon. (Sample Image) Loc ks menu scr een 2 Press the ( arro w ) button to display the PIN code entry screen. The Lock System screen appear s if a PIN code has not been stored. (Sample Image) Loc k system - sto[...]

89 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r egion) The PIN code cannot be set to “ 0000. ” Fo r go tt en PIN code While the PIN code entering screen is displayed, press the INFO button four times within fi ve seco nds. The PIN code will be cleared and you can enter a new PIN code. Changing o r dele t ing you r PIN co[...]

90 Using t he TV ’ s fe a t u r es Using par ental contr ols (for USA re gion) 5 Press the ( arro w ) button to select On , a nd then press the ENTER button. (Sample Image) Loc ks menu - Enab le Rating Blocking selection 6 Press the ( arro w) button to highlight Edit Rating Limits , and then press the ENTER button. The Edit Rating Limits screen a[...]

91 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r egion) T o download the additional rating system, if av ailabl e: 1 Press t h e MENU button and highlight the Locks menu icon. 2 Press the ( arro w ) button to display the PIN code entering screen. 3 Enter your four -digit PIN code, and then press the ENTER button. 4 Press the [...]

92 Using t he TV ’ s fe a t u r es Using par ental contr ols (for USA re gion) ❖ The additional rating system can only be downloaded one time. Y ou will not be able to download any updates to the rating system should such updates become available. ❖ The additional rating system is not designed, transmitted or controlled by the TV or T oshiba,[...]

93 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r egion) Independent rating system for movies: Indication other than rating system: If you place an “X” in the box next to “None” Rated, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked. [...]

94 Using t he TV ’ s fe a t u r es Using par ental contr ols (for USA re gion) 3 Enter your four -digit PIN code, and then press the ENTER button. 4 Press the ( arro w) button to highlight Enable Rating Blocking . 5 Press the ( arro w ) button to select On . 6 Press the ( arro w) button to highlight Edit Rating Limits , and then press the ENTER b[...]

95 Using t he TV’ s fea t u r es Using the input lock featur e Unlocking p r og r ams t empo r a r ily If you try to tune to a program that exceeds the rating lim its you hav e set, the TV w ill enter pr ogram lock mode and a warning message appears on the screen. (Sample Illustrati on) W arning - exceeded r ating limit Y ou can either tem porari[...]

96 Using t he TV ’ s fe a t u r es Locking c ha nnels Locking channels W ith the Lock feature, you can lock specific channels. Lock ed channels can only be accessed b y entering the PIN code, see “Entering the PIN code” o n page 88 . T o lock channels: 1 From the Set up menu, highlight Installation , and then press the ENTER button. 2 Press t[...]

97 Using t he TV’ s fea t u r es Locking c ha nnels Using t he GameTime r ® Y ou can use the GameT imer ® to set a ti me limit for playing a video game (30–120 minutes). When the GameTimer ® e xpires, the TV enters Input Lock mode and locks out the inpu t source for the video game de vice. T o set the GameTimer ® : 1 From the Locks m enu, p[...]

98 Using t he TV ’ s fe a t u r es Using the PC settings featur e 5 Press the ( arro w ) button to select On . When the control panel is locked and any b utton on the control panel (except PO WER) is pressed, the message “NOT A V AILABLE” appears. (Sample Illustration) Locks menu - P anel Lock selection T o unlock the control panel, select Of[...]

99 Using t he TV’ s fea t u r es Using the PC settings featur e If a computer is not connected or there is no PC input signal, this feature will be grayed out in the Setup menu. 4 Press the ( / arrow) b uttons to select an item. 5 Press the ( / arrow) b uttons to make the appropriate adjustments. (Sample Image) PC Settings - adjustments screen Th[...]

100 Using t he TV ’ s fe a t u r es Using the Media Player 2 Highlight A udio Setup , and then press the ENTER button. 3 Press the ( / arrow) b uttons to select PC A udio , and then press the ( / arrow) b uttons to select No or Ye s . ❖ Ye s : When vie w ing the PC input, the audio from th e PC Audio input can be heard. ❖ No: When viewing the[...]

101 Using t he TV’ s fea t u r es Using the Media Player ❖ Gently insert the USB device into the port and do not remove while viewing Media Player . ❖ USB device: USB Mass Storage Class devic e (MSC) ❖ Connectivity is not guara nteed for all devices. ❖ Connect the USB device to the TV directly . ❖ Do not use a USB Hub. ❖ Y ou must obt[...]

102 Using t he TV ’ s fe a t u r es Using the Media Player If you repeatedly insert and remove the USB conne ctor , the prompt may not appear . 2 Press the ( / arro w) buttons to select Ye s , and then pres s the ENTER button. The Media Player menu appears. (If you select No, n othing happens.) (Sample Image) Media Player - open scr een ❖ The p[...]

103 Using t he TV’ s fea t u r es Using the Media Player Viewing pho t o files There are three types of vie w mo des, multi view , single view , and slide show . Mul t i View This view allo ws you to search fo r photos in a grid format. These pictures are displayed using thum bnail data in each image file. (Sample Image) Media Play - photos scr e[...]

104 Using t he TV ’ s fe a t u r es Using the Media Player ❖ Press to ro tate the image 90° counterclockwi se. Press to rotate the image 90° clockwise. Slide show This view allo ws you to watch a slide show of the photos. In this mode, only files located in the se lected directory will be played. T o use slide show: 1 Press the ENTER b utton [...]

105 Using t he TV’ s fea t u r es Using the Media Player 2 Select the desired folder and press the ENTER button to mov e to the next layer . Press the CH R TN button to move back to the previous layer . 3 W ith th e desired file selected, press the ENTER button or the PLA Y button to start playback. 4 Press the ST OP button to stop playback ❖ I[...]

106 Using t he TV ’ s fe a t u r es Using the Media Player 3 Select a music file and press the ENTER button to start playback. 4 Press CH RETURN twice to move back to photo view mode. The music is no w playing in the background. So rt ing pho t o o r music files From the photos Multi V iew or from the music list, you can sort your photo or music [...]

107 Using t he TV’ s fea t u r es Setting the sleep timer During playback, you can adjust the SOUND menu functions from the Quick Menu. Sorting, T otal Time display may not be available in all c ases. Se tt ing t he sleep t ime r Y ou can set the sleep timer to turn off the TV after a set length of time (maximum of 12 hours). T o set the sleep ti[...]

108 Using t he TV ’ s fe a t u r es Automatic P ower Down T o display th e time remaining until the TV turns off, press the SLEEP button. T o cancel the sleep timer , repeatedly press SLEEP until it is set to 0 minutes. Au t oma t ic Powe r Down The TV can be configured to auto matically turn itself off after 4 hours if you do not operate the TV [...]

109 Using t he TV’ s fea t u r es Using HDMI®-CEC 3 Press the ( / arrow) buttons to highlight the item you want to change, and press the ( / arrow) b uttons to select On or Off . ❖ Default setting for this feature is On. ❖ A warning message will appear 1 minute before the TV turns off. Using HDMI ® -CEC This is a ne w feature that uses CEC [...]

110 Using t he TV ’ s fe a t u r es Using HDMI®-CEC HDMI ® -CEC Playe r Con tr ol menu func t ions T o control the HDMI ® -CEC player from the menu: 1 Press MENU and open the Preferences menu. 2 Highlight HDMI ® -CEC Player Control and press the ENTER button. (Sample Image) Pr efer ences menu - HDMI ® -CEC Player Contr ol 3 Press the ( / arr[...]

111 Using t he TV’ s fea t u r es Using HDMI®-CEC HDMI ® -CEC inpu t sou r ce selec t ion If a HDMI ® -CEC device wi th HDMI ® switching capability (e.g. Audio Recei ver) is connected to the HDMI ® input, you can select another HDMI ® -CEC device that is connec ted to the master HDMI ® device using the TV’ s INPUT button, see “Selectin[...]

112 Using t he TV ’ s fe a t u r es Displaying TV status information When you turn on the Audio Receiver , change its input sourc e or adjust the sound volume, the sound will be output from the audio receiver’ s speakers even if TV Speakers has been selected. T urn the TV off and on again to output the sound from the TV speakers. Se tt ing up H[...]

113 Using t he TV’ s fea t u r es Understanding the last mode memory featur e ❖ Digital signal strength indicat or (bar graph in lower right corner of box; for A TSC signals only) ❖ Stereo, Mono, or SAP audio status (when in HDMI ® input mode, Dolby Digital, or PCM) ❖ V ideo resolution ❖ Aspect rati o of incomi ng video si gnal (4:3 o r [...]

114 Chap t e r 7 Using the TV’ s Advanced Features Using t he advanced pic t u r e se tt ings Dynamic Con tr as t Dynamic Contrast detects changes in picture quality that af fect the appearance of your contrast settings and then automatically adjusts the video. T o select Dynamic Contrast preference: 1 From the Pi cture menu, hig hlight Picture S[...]

115 Using t he TV’ s Advanced Fea t u r es Using the advanced pictur e settings 4 Press the ( / arrow) b uttons to select High , Middle , Low or Off . S t a t ic Gamma The static gamma feature lets you ad just the lev els of black in the picture. T o adjust the static gamma settings: 1 Press t h e MENU button and open the Pictur e menu. 2 Highlig[...]

116 Using t he TV’s Advanced Fea t u r es Using the advanced picture settings T o select the color temperature: 1 Press t h e MENU button and open the Pictur e menu. 2 Highlight Picture Settings , and then press the ENTER b utton. 3 Highlight Advanced Picture Settings , and then press the ENTER button. 4 Highlight Color T emperature , and then pr[...]

117 Using t he TV’ s Advanced Fea t u r es Using the advanced pictur e settings 3 Highlight Advanced Pictur e Settings and press the ENTER button. 4 In the ClearFrame field, select On . 5 T o sav e the new settings, highlight Done and press the ENTER button. T o rev ert to th e factory defaults, highlight Reset and press the ENTER button. ❖ If [...]

118 Using t he TV’s Advanced Fea t u r es Using the advanced picture settings CableClea r ® digi t al Noise Reduc t ion The CableClear ® digital Noise Reduction feature allows you to reduce visible interference in your TV picture. This may be useful when recei ving a broadcast with a weak signal (especially a Cable channel) or playing a noisy v[...]

119 Using t he TV’ s Advanced Fea t u r es Using the advanced pictur e settings Game Mode Y ou can use the Game Mode feature for shorter frame delays when you need split-second timing betw een the on-screen display and input fro m the contro ller (such as music creation and high-action game s). This feature is more ef fective for 480i and 1080i i[...]

120 Chap t e r 8 T roubleshooting Gene r al tr oubleshoo t ing Before calling a service technician, re vie w this chapter or visit the T oshiba technical support W eb site at support.toshiba.co m for possible causes/solutions for the probl em you are experiencing. Before you begin to troubleshoot any problem, f irst unplug the TV from the AC wall o[...]

121 T r oubleshoo t ing Pictur e pr oblems Other pr oblems. If your TV’ s problem is not addresse d in this T roubleshooting section or the recommended solution has not worked, use the Reset F actory Defaults procedure, see “Resetting Factory Defaults” on page 58 . TV will not turn on. Ensure the power cord is plugged in properly , and then p[...]

122 T r oubleshoo t ing Pictur e pr oblems V ideo Input Selection problems If the Input Selection window does not appear when you press INPUT on the remote control or TV , press INPUT a second time. This will cause a change to the next video input source and display the Input Selection window . Cannot view exter nal signals or channel 3 or 4 If you[...]

123 T r oubleshoo t ing Sound pr oblems Scrolling text pr oblem When slo w motion video is present the units will treat any scrolling text as f i lm and may cause a slight jitter of the scrolling text. T urning off the Film Stabil ization f eature will correct this issue, see “Film Stabilization (L5200 U Series)” on page 117 . (L5200U Series on[...]

124 T r oubleshoo t ing Channel tuning pr ob lems Channel t uning p r oblems Ensure that the remote control is set to the correct device mode, see “Learning about the remote control” on page 42 . The Auto T uning feature may ha ve erased the channel from memory . Add the channel to the channel memory , see “Storing channels in memory (optiona[...]

125 T r oubleshoo t ing No HDMI®-CEC operation No HDMI ® -CEC ope r a t ion The HDMI ® -CEC feature is a vailable for T oshiba HDMI ® -CEC compatible devices . Ensure that HDMI ® cables with the ( ) Logo are used. When the connected HDMI ® -CEC device does not w ork correctly after you have changed settings of the de vice, turn off your TV an[...]

126 5.375 x 8.375 ver 2.3 Appendix A S pecifications ❖ These models comply with the specifications listed below . ❖ Designs and specifications are subject to change without notice. ❖ These models may not be compa tible with features and/or specifications that may be added in the future. T elevision sys t em Channel cove r age NTSC standard A [...]

127 Specifica t ions P ower sour ce 5.375 x 8.375 ver 2.3 Powe r sou r ce 120V A C, 60 Hz Powe r maximum cu rr en t Powe r consump t ion Audio powe r 19L4200U 0.9 A 24L4200U 1.0 A 32L4200U 1.0 A 40L5200U 0.9 A 46L5200U 1.1 A 50L5200U 1.3 A 19L4200U 0.6 W in Standb y mode 24L4200U 0.6 W in Standb y mode 32L4200U 0.6 W in Standb y mode 40L5200U 0.6 W[...]

128 Specifica t ions Speaker type 5.375 x 8.375 ver 2.3 Speake r t ype Video/audio t e r minals Video/audio inpu t Colo r S tr eam ® (componen t video) HD inpu t HDMI ® inpu t Digi t al audio ou t pu t Optical type PC inpu t 15-Pin D-sub Analog RGB 19L4200U T wo 3.7 x 1.06 x 0.8” 24L4200U T wo 3.58 x 0.98 x 0.9” 32L4200U T wo 3.93 x 1.18 x 0.[...]

129 Specifica t ions Dimensions 5.375 x 8.375 ver 2.3 Dimensions Mass (weigh t ) Ope r a t ing condi t ions 19L4200U W idt h 1'-5 1/2” (445.8mm ) Height 1'-3/4” (324.5mm) Depth 7 ” (445.8mm) 24L4200U W idt h 1'-10 3/8” (567.52m m) Height 1'-2 1/4” (362.54m m) Depth 7 ” (177.52mm) 32L4200U W idt h 2'-5 3/8” (74[...]

130 Specifica t ions Supplied accessories 5.375 x 8.375 ver 2.3 Supplied accesso r ies ❖ Remote control with two size “ AAA” batt eries ❖ Resource Guide ❖ Quick Start Guide ❖ Pedestal and hardware Accep t able signal fo r ma t s fo r PC IN, HDMI ® PC IN signal fo r ma t s Depending on the connected PC, the following conditions may occu[...]

131 Specifica t ions Acceptable signal format s for PC IN, HDMI® 5.375 x 8.375 ver 2.3 ❖ Some illustrations in this User's Guide are for explanation purposes and may differ from the actual unit. ❖ Designs and specifications are subject to change without notice. ❖ These models may not be compa tible with features and/or specifications th[...]

132 5.375 x 8.375 ver 2.3 Appendix B License Agreement License Info r ma t ion on t he sof t wa r e used in t he TOSHIBA Digi t al TV The software pre-installed in the T OSHIBA Digital T elevisions consists of multiple, independent software components. Each software component is cop yrighted by T OSHIB A or a third party . The TOSHIB A Digital T el[...]

133 5.375 x 8.375 ver 2.3 License Ag r eemen t implied. "W arranty" here includes, but not l imited to, an implied warranty for marketability or fitness for specif ic uses. All risks associat ed wi th the quality or performance of these software components are assumed by the user . TOSHIB A shall not be liable whatsoever for any cost of r[...]

134 5.375 x 8.375 ver 2.3 License Ag r eemen t (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the auth ors accept NO LIABILITY for damages of any kind. These conditions apply to any software deri ved fr om or based on the IJG code, not just to the unmodified library [...]

135 5.375 x 8.375 ver 2.3 License Ag r eemen t This license was inspired by the BSD, Artis tic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion an d use of free software in commercial and fr eew are products alike. As a consequence, its main points are that: ❖ W e don't promise that this software works. Ho wev er , w[...]

136 Index Nume r ics 22605 h3-Heading 3 HDMI®-CEC input source selection 111 A advanced picture settings CableClear® digital Noise Reduction 118 Color temperatu re 115 Dynamic Contrast 114 MPEG Noise Reduction 118 Static Gamma 115 using 114 audio adjusting quality 85 Audyssey ABX™ 86 Dolby® Digital Dynamic Range Control 87 muting sound 83 opti[...]

137 Index switching between two channels 69 tuning to the next 68 Channel Browser elements 66 tuning channels 64 Channel Return switching between two channels 69 channels auto tuning 51 locking channels 96 skipping 54 specific channel 69 storing in memo ry 51 cinema mode selecting 77 closed captions CC selector 82 Digital CC settings 81 using 80 co[...]

138 Index menu layout 47 navigation 47 setup 47 N no signal power down set 108 O overv iew installation 17 setup 17 use 17 P panel lock feature using 97 parental controls blocking programs/mo vies by rating (V -Chip ) 89 using 89 PC Audio setting 99 PC settings feature using 98 picture adjusting 78 adjusting q uality 79 picture mode selecting 78 pi[...]

139 Index switching between two channels 69 system status viewing 57 T time zone setting 57 timer sleep timer 107 troubleshooting 120 channel tuning problems 12 4 closed caption problems 124 contact T oshiba 125 HDMI® 125 media player problems 125 No HDMI®-CEC operation 125 picture problems 121 Rating blocking problem s 124 remote control problem[...]