Servis-Rhino 2407TL инструкция обслуживания

© 201 1 Alamo Group Inc. $0.00 2407TL Published 01/1 1 Part No. F-4003C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com LOADER This Operator' s Manual is an integral p art of th e safe operation of this machine an d must be maintaine d with the un it at all times. READ, U[...]

T o the Owner/Operator/Dealer All implement s with moving part s are potentially ha zardous . There is no substit ute for a c autious , safe-minded operator who recognizes the potential hazards and follows reason able safety practices. The manufa cturer has designed this impleme nt to be used with all its safety equipment proper ly attach ed to min[...]

T ABLE OF CONTENTS SAFETY SECTION ........ ................................................. .......................................... ........... 1- 1 General Safety Instructions and Practic es ................... ................ ................. ................ ................ . ........ ............ 1-2 Operator Safety I nstructions and Pra[...]

MAINTENANCE SECTION ................. ...................................................................... ........... 5-1 Lubrication Schedule ............................. ............. ............ ................. ............. ............ .......... ................... ............ 5-4 Daily Maintenance ............. ............. ........[...]

Safety Section 1-1 SAFETY SECTION[...]

SAFETY 2407TL 01/11 Safety Section 1-2 © 201 1 Alamo Group Inc. SAFETY General Safety Instr uctions and Practices A careful operator is the best opera tor . Safety is of primary import ance to the manu facturer and should be to the owner/operator . Most accidents ca n be avoided by being aware of yo ur equipment, your surrounding s, and observing [...]

SAFETY 2407TL 01/11 Safety Section 1-3 © 201 1 Alamo G roup Inc. SAFETY Never allow children to operate, ride on, or co me close to the T ractor or Implement. Usually , 16-17 ye ar-old children who a re mature and responsible can operate the implement with adult supe rvision, if they have read and underst and the Opera tor ’s Manuals, be en trai[...]

SAFETY 2407TL 01/11 Safety Section 1-4 © 201 1 Alamo Group Inc. SAFETY Operator Safety Instru ctions and Practices Never operate the T r actor or Implement until you h ave read and completely underst and th is Manual, the T ractor Operator ’s Manual, and each of the Safety Messages found in the Manual or on the T ractor and Implement. Learn ho w[...]

SAFETY 2407TL 01/11 Safety Section 1-5 © 201 1 Alamo G roup Inc. SAFETY Equipment Operation Safety Instructions and Practices Prolonged operation may cause operato r bor edom and fa tigue af fecting safe operation. T ake scheduled work breaks to help prev ent these p otentially impaire d operating conditions. Never operate the Implement and T ra c[...]

SAFETY 2407TL 01/11 Safety Section 1-6 © 201 1 Alam o Group Inc. SAFETY The Boom is designed only to position and ope rat e the Bucket which is att ached to it. Never attempt to lift, pull, or push ot her solid object s with the boom or bucket. Serious injury could result from a structural failu re when the Boom is used fo r purposes other than th[...]

SAFETY 2407TL 01/11 Safety Section 1-7 © 201 1 Alamo G roup Inc. SAFETY Keep bysta nders 10 feet away from the tractor and loader while operating. The byst anders could enter the p ath of the tractor or items could fall from the loader resultin g in serious injury to the byst ander . (SL-01) For added safety when lif ting loads above the height of[...]

SAFETY 2407TL 01/11 Safety Section 1-8 © 201 1 Alam o Group Inc. SAFETY Only mount the load er on a tractor that is listed on the mounting in structions. Never mount on a tricycle stee ring front axle . Move the tractor front and re ar wheels to the widest sp acing and add the recommen ded rear tractor ballast to prevent tractor tip over . Keep th[...]

SAFETY 2407TL 01/11 Safety Section 1-9 © 201 1 Alamo G roup Inc. SAFETY Use extreme care when loading, transp orting or dumping loads that imp a ir or partia lly block the operator’s line of sight. Know whe re you are travelin g. Make sure no byst anders are in the area of travel. If a byst ander assists in pr oviding guidance, make sure they ar[...]

SAFETY 2407TL 01/11 Safety Section 1- 10 © 201 1 Alam o Group Inc. SAFETY Connecting or Disconnecting Impl ement Safety Instructions and Practices The center of gravity of a Po wer Unit equipped with a front -mounted Im plement is shifted to the front and remo ves weight from the rear wheels. The Power Unit should main tain at least 25% total weig[...]

SAFETY 2407TL 01/11 Safety Section 1-11 © 201 1 Alamo G roup Inc. SAFETY T ransporting Safety Instructions and Practices Make sure the loader is p roperly attache d to the tractor and the retain ing pins securely lock the loader into po sition. Improper mounting of the loader onto the tr actor can result in the loader falling causing serious injur[...]

SAFETY 2407TL 01/11 Safety Section 1- 12 © 201 1 Alam o Group Inc. SAFETY Before transp orting the tractor and Loader engage the loa der valve travel lock to prevent inadverten t contact with the joystick controller causing sudden dropping o f the loader and attachmen t. If the loader att achment, such as a bucket, were to drop suddenly and hit th[...]

SAFETY 2407TL 01/11 Safety Section 1-13 © 201 1 Alamo G roup Inc. SAFETY Maintenance and Service Safet y Instructions and Practices READ, UNDERST AND, and FOLLOW the following Safety Messag es. Serious injury or death may occur unless care is t aken to follow the warnings and instructions st ated in the Safety Messages. Always use good common sens[...]

SAFETY 2407TL 01/11 Safety Section 1- 14 © 201 1 Alam o Group Inc. SAFETY Periodically inspect all moving part s for wear and replace whe n necessary with au thorized servic e part s. Look for loose fasteners, worn or broken p arts, and leaky or loose fittings. Make su re all pins have cotter pins and washers. Serious in jury may occur from not ma[...]

SAFETY 2407TL 01/11 Safety Section 1-15 © 201 1 Alamo G roup Inc. SAFETY S torage and Parking Safety Instructions and Practices Never crawl under or allow childr en to play ar ound or on a loader that is discon nected from the tractor . The loader could fall crushing a pe rson resulting in seri ous injury or death. (SL-13) Do not remove the att ac[...]

SAFETY 2407TL 01/11 Safety Section 1- 16 © 201 1 Alam o Group Inc. SAFETY Decal Location NOTE: Rhino supplies safe ty decals on this product to promote safe operat ion. Damage to the decals may occur while in shipping, use, or reconditioning. Rhino cares about the safety of its customers, operator s, and bystanders, and will replace the safety de [...]

SAFETY 2407TL 01/11 Safety Section 1-17 © 201 1 Alamo G roup Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 49696 1 LOGO Rhino, Left 2. 51448 1 LOGO Rhino, Right 3. 52605 2 MODEL 2407TL 4. 52740 2 W ARNING Oil Leaks 5. 52203 1 W ARN ING Lock V alve in Transport 6. 52204 1 INSTRUCT Loader Positions 7. D469 1 W ARNING Loader Safety 8. D468 2 DA[...]

SAFETY 2407TL 01/11 Safety Section 1- 18 © 201 1 Alam o Group Inc. SAFETY Decal Description Rhino, Le ft P/N 49696 Rhino, Right P/N 51448 MODEL NAME: 2407TL P/N 52605[...]

SAFETY 2407TL 01/11 Safety Section 1-19 © 201 1 Alamo G roup Inc. SAFETY W A RNING! - DO NOT operate with oil leaks. -Inspect hoses regularly . Failure to inspect and replace worn hoses may allow th em to rupture suddenly and violently , resulting in serious bodily inju ry or death from scalding, fire burn injury , or oil penetration. -Frayed, tor[...]

SAFETY 2407TL 01/11 Safety Section 1- 20 © 201 1 Alam o Group Inc. SAFETY Loader Safety -Read, understand and follow the operation, wa rning, and safety instruction s in the Operator ’s Manual. -Equip tractor with ROPS (Ro ll Over Protection System) before installing or operati ng the loader . -Operate Loader only from opera tor ’s seat with t[...]

SAFETY 2407TL 01/11 Safety Section 1-21 © 201 1 Alamo G roup Inc. SAFETY DANGER! - Use ROPS and seatbelt at all times. Add recommende d rear ballast. Operate tr actor at low speeds. Failure to comp ly may result in serious injury or death. D470 Slow Moving V ehicle Decal. Keep SMV reflector clean and visible. DO NOT transpo rt or operate without t[...]

SAFETY 2407TL 01/11 Safety Section 1- 22 © 201 1 Alam o Group Inc. SAFETY Federal Laws and Regulations This section is intend ed to explain in br oad terms the co ncept and effect of federal la ws and regulations concerning employe r and employee equ ipment operat ors. This section is not intended as a legal interpretation of the law an d should n[...]

Introduction Section 2-1 INTRODUCTION SECTION[...]

INTRODUCTION 2407TL 01/11 Introduction Section 2-2 © 201 1 Alam o Group Inc. INTRODUCTION This 2407TL Loader is designed with care and built with quality materials by skille d workers. Proper assembly , maintenance, and ope rating practices, as described in this manual, will help t he owner/operator get years of satisfactory service from the machi[...]

INTRODUCTION 2407TL 01/11 Introduction Section 2-3 © 201 1 Alamo Group Inc. INTRODUCTION DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement. Drugs and alcohol w ill affect an operator ’s alertness and coordination and theref ore af fect the operator ’s ability to operate the eq uipment safely . Befor[...]

INTRODUCTION 2407TL 01/11 Introduction Section 2-4 © 201 1 Alam o Group Inc. INTRODUCTION The RHINO 2407TL Loader is designed for four-wheel dr ive tractors. They are intended to lift only loos e materials that will fit in the bucket. All cylinders are dou ble-acting. Parking stands su pport loader so tractor can be “driven in” for quick att a[...]

INTRODUCTION 2407TL 01/11 Introduction Section 2-5 © 201 1 Alamo Group Inc. INTRODUCTION Attention Owner/Operator BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, com pletely underst and the Safety Messages and instructions, and know how to operate correctly both the tractor and implement. 2. Fill out the Warranty Card in[...]

[...]

Assembly Section 3-1 ASSEMBL Y AND CONNECTING THE LOADER SECTION[...]

ASSEMBLY 2407TL 01/11 Assembly Section 3- 2 © 201 1 Alam o Group Inc. ASSEMBL Y Assembly Instructions T o avoid injury during installation of the load er attachment, do not allow b ystanders within 1 0 feet of load er or attachment. Always wear safety glasses when removing or installing buckets. Always use a drif t and hammer made of no n-sparking[...]

ASSEMBLY 2407TL 01/11 Assembly Section 3- 3 © 201 1 Alam o Group Inc. ASSEMBL Y Proper Ballasting and Wheel Sp acing S pread fro nt wheels to maximu m distance. S pread rea r wheels to maximum dis tance. Add rear wheel weight, rea r ballast box or implement. Ma ke sure ther e is 20% of total weigh t on rear ax le.[...]

ASSEMBLY 2407TL 01/11 Assembly Section 3- 4 © 201 1 Alam o Group Inc. ASSEMBL Y Dismounting Loader and Mo unting Loader to T ractor Dismounting Loader T o av oid injury during installation of loader: • Place loader bucket again st barrier to restrict forwar d movement of loader . • Do not permit byst anders within 15 feet of loader . Loader mu[...]

ASSEMBLY 2407TL 01/11 Assembly Section 3- 5 © 201 1 Alam o Group Inc. ASSEMBL Y 6. Remove linch pins and 1” hitch pins from loader uprig ht. 7. S tart tractor engine and r elease brakes. Retract bucke t cylinders to allow p arking stands to contact gr ound. 8. Extend lift cylinder s 6” to 8” to ro tate top of loader upright s forward out of [...]

ASSEMBLY 2407TL 01/11 Assembly Section 3- 6 © 201 1 Alam o Group Inc. ASSEMBL Y Mounting Loader T o avoid injury during installation of the load er attachment, do not allow b ystanders within 1 0 feet of load er or attachment. Mounting is basically reve rse of dis mounting. 1. Slowly drive tractor into loader appr oximately 6” from loader mount [...]

ASSEMBLY 2407TL 01/11 Assembly Section 3- 7 © 201 1 Alam o Group Inc. ASSEMBL Y Att aching Pin on Bucket Always wear safety glasses when removing or installing buckets. Always use a drift and hammer made of non-sp arking mate rial (a shot-filled mallet is recommended) to install or remove pins. A stee l hammer to drif t could generate flying mater[...]

[...]

Operation Section 4-1 OPERA TION SECTION[...]

OPERATION 2407TL 01/11 Operation Section 4-2 © 201 1 Alamo Group Inc. OPERA TION RHINO 2407TL LOADER OPERA TION INSTRUCTIONS Y our 2407TL Lo ader should now be assembled and inspected for any eviden ce of defective or damaged pa rts before use. Any evidence of damag e should be reported to your dealer imme diately . This section of the Operator ?[...]

OPERATION 2407TL 01/11 Operation Section 4-3 © 201 1 Alam o Group Inc. OPERA TION 1. S t andard Equipment and Specifications S pecifications will vary w ith tire si ze, hydraulic system and bucket used. S pecificat ions are given for a loader equipped with a 60” bucket, ext ernal hydrau lic syste m of 8.0 GPM with engine operating at 2900 RPM an[...]

OPERATION 2407TL 01/11 Operation Section 4-4 © 201 1 Alamo Group Inc. OPERA TION 2. Operator Requirement s DO NOT use drugs or alc ohol immediately befo re or while operating the T ractor and Implement. Drugs and alcohol w ill affect an operator ’s alertness and coordination and theref ore af fect the operator ’s ability to operate the eq uipm[...]

OPERATION 2407TL 01/11 Operation Section 4-5 © 201 1 Alam o Group Inc. OPERA TION Never run the T ractor engine in a closed building or with out adequate ventilation. T he exhaust fumes can be hazardou s to your health. (SG-23) Battery posts, ter minals and related accesso ries contain le ad and lead compounds, chemicals known to the state of Cali[...]

OPERATION 2407TL 01/11 Operation Section 4-6 © 201 1 Alamo Group Inc. OPERA TION 3. T ractor Requirement s Safe operation of the unit is the responsibility of a qualifi ed operator . A qualified operator ha s read and understands th e implement and tractor Operator’s Ma nuals an d is experienced in implement and tractor operation and all associa[...]

OPERATION 2407TL 01/11 Operation Section 4-7 © 201 1 Alam o Group Inc. OPERA TION T ractor Requirement s and Cap abilities • ASABE approved Roll-Over Protective S tru cture (ROP S) or RO PS cab and seat belt • T ractor Safety Devices ....... .......... Slow Moving V ehicle (SMV) emblem, lighting • T ractor Ballast............... ....... As r[...]

OPERATION 2407TL 01/11 Operation Section 4-8 © 201 1 Alamo Group Inc. OPERA TION 4. Getting On an d Off the T ractor T o ens ure tractor stab ility when operating add wheel ballast or rear weights to rear tra ctor tires. For better stability , use tractor with wide front axle rather than tricycle fron t wheels. Move wheels to the tractor m anufact[...]

OPERATION 2407TL 01/11 Operation Section 4-9 © 201 1 Alam o Group Inc. OPERA TION 4.1 Boarding the T ractor 4.2 Dismounting the T ractor Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death. (SG-1 0) Never grasp control levers wh en mounting the machine. (SBH-4) Use both hand[...]

OPERATION 2407TL 01/11 Operation Section 4-10 © 201 1 Alamo Group Inc. OPERA TION 5. St arting the T ractor Never run the T ractor engine in a closed building or with out adequate ventilation. T he exhaust fumes can be hazardou s to your health. (SG-23) S tart tractor only when pr operly seated in the T ractor seat. S tarting a tractor in gear can[...]

OPERATION 2407TL 01/11 Operation Section 4-11 © 201 1 Alam o Group Inc. OPERA TION 6. Pre-Operation Inspection and Service Periodically inspect all moving part s for wear and replace whe n necessary with au thorized servic e part s. Look for loose fasteners, worn or broken p arts, and leaky or loose fittings. Make su re all pins have cotter pins a[...]

OPERATION 2407TL 01/11 Operation Section 4-12 © 201 1 Alamo Group Inc. OPERA TION 6.2 Loader Pre-Operation Inspection and Service 6.1 T ractor Pre-Operation Inspection/Service Refer to the tr actor operator’s manual to ensure a complete pre-operation inspection and scheduled service is performed accordi ng to the manufacturers recommenda tions. [...]

OPERATION 2407TL 01/11 Operation Section 4-13 © 201 1 Alam o Group Inc. OPERA TION Before operatio n, a complete inspection and service is required to e nsure the loader is in a good and safe working condition. Damaged and/or br oken part s should be repa ired and/or replaced imme diately . T o ensure the loader is ready for operation, cond uct th[...]

OPERATION 2407TL 01/11 Operation Section 4-14 © 201 1 Alamo Group Inc. OPERA TION LOADER BOOM ASSEMBL Y • Inspect condition of each arm section weldment • Ensure all pins ar e in place. • Ensure all bol ts and screws are proper ly installed. • Check condition o f bushings at boom pivot points. • Ensure each hydraulic c ylinder is install[...]

OPERATION 2407TL 01/11 Operation Section 4-15 © 201 1 Alam o Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection T ractor ID#______________________ Make____________________ Date___________________________ Shift_____________________ Before conducting the inspection, make sur e the tractor engine is off, all rotation has stopped and the tractor[...]

OPERATION 2407TL 01/11 Operation Section 4-16 © 201 1 Alamo Group Inc. OPERA TION FRONT END LOADER PRE- OPERA TION Inspection Front End Loader ID#_______________Make____________________ Date_____________________________Shift____________________ Before conducting the inspection, make sure the tractor en gine is off, all rotation has stopped and the[...]

OPERATION 2407TL 01/11 Operation Section 4-17 © 201 1 Alam o Group Inc. OPERA TION 7. Driving the T ractor and Loader This Implemen t may be wider than the Tractor . Be ca reful when op erating or tran sporting this equipment to pr event the Impleme nt from runni ng into or striking sign pos ts, guard rails, concrete abutments o r other solid obje[...]

OPERATION 2407TL 01/11 Operation Section 4-18 © 201 1 Alamo Group Inc. OPERA TION Safe tractor transport requ ires the operator p ossess a thorough knowledg e of the model be ing operated and precautions to t ake while driving with a n attached impl em ent. Ensure the tractor has the cap acity to handle the weight of the implement and the tracto r[...]

OPERATION 2407TL 01/11 Operation Section 4-19 © 201 1 Alam o Group Inc. OPERA TION Do not raise the loader on a hillside. Do not transport across a slope with a raised loader . When the loader is raised, the center of gravity of the tractor and loader is ra ised increasing the pote ntial for the tractor to tip over . Tractor whe el contact with an[...]

OPERATION 2407TL 01/11 Operation Section 4-20 © 201 1 Alamo Group Inc. OPERA TION Use extra care when turn ing or stopping. Allow for in creased length and weight of ad ded loader . The loader adds five to six feet of lengt h in front of the tr actor and significant weight. Allow extra dist ance when stopping or turning. Do not allow loader o r at[...]

OPERATION 2407TL 01/11 Operation Section 4-21 © 201 1 Alam o Group Inc. OPERA TION Do not use loader a s a jack to raise the tractor tires off the gr ound. The loader co uld fail causing the tractor and loader to fall to the ground resulting in serious inju ry . (SL-25) Use extreme care when loading, transp orting or dumping loads that imp a ir or[...]

OPERATION 2407TL 01/11 Operation Section 4-22 © 201 1 Alamo Group Inc. OPERA TION Always have a heavy att achment, such as a bu cket mounted on loader when it is removed from tractor . It is important not to put excessive weight on parking st ands with lift cylinder retr action. Damage may result. If the loader valve controls fail to functions pro[...]

OPERATION 2407TL 01/11 Operation Section 4-23 © 201 1 Alam o Group Inc. OPERA TION 8.1 Operating the Loader The following text and illustrati ons offer suggested loader an d tractor operating techniques. FILLING THE BUCKET Approach and enter th e pile with a level bucket. Loaders with 1-lever contro l, ease lever back toward you to lift and roll b[...]

OPERATION 2407TL 01/11 Operation Section 4-24 © 201 1 Alamo Group Inc. OPERA TION Lift and roll back of bucket will increase efficiency because... A level bucket throughout the lif ting cycle resists bucket lift and increa ses breakaway ef f ort. NOTE: Do not be concerned if the bucket is not completely fille d during each pass. Ma ximum productiv[...]

OPERATION 2407TL 01/11 Operation Section 4-25 © 201 1 Alam o Group Inc. OPERA TION LIFTING THE LOAD When lifting th e load, keep the bucket positioned to avoid spillage. Loader has mechanical self leveling of attachment in both raise and lowe r cycle. Attachment can be adjusted by using bucket cylinders. CARR YING TH E LOAD Position bucket just be[...]

OPERATION 2407TL 01/11 Operation Section 4-26 © 201 1 Alamo Group Inc. OPERA TION Use extreme care when ope rating loader on a slope, keep bucket as low as possible. This keep s center of gravity low and will provide maximum stability . When transpor ting the load , keep bucket as low as possible, to avoid tipping, in ca se a wheel drop s in a rut[...]

OPERATION 2407TL 01/11 Operation Section 4-27 © 201 1 Alam o Group Inc. OPERA TION LOWERING THE BUCKET After bucke t is dumped, back away fro m vehicle while lowering and rolling back bucket.[...]

OPERATION 2407TL 01/11 Operation Section 4-28 © 201 1 Alamo Group Inc. OPERA TION OPERA TING WITH FLOA T CONTROL During hard sur face operation, keep bucket level and put lift control in flo at position to permit bucket to float on workin g surface. If hy draulic down pressure is exerted on bucket, it will wear faster than normal. Float will also [...]

OPERATION 2407TL 01/11 Operation Section 4-29 © 201 1 Alam o Group Inc. OPERA TION LOADING FROM A BANK Choose a forward gear that pr ovides sufficient ground speed for loading. Exercise caution when un dercutting high ba nks. Dirt slides can be dangerous. Load from as low as possible for maximum efficien cy . Loader lift an d breakaway capacity di[...]

OPERATION 2407TL 01/11 Operation Section 4-30 © 201 1 Alamo Group Inc. OPERA TION Another method for large dirt piles is to bu ild a ramp approach to the pile. It is important to keep the bucket level when approaching a bank or pile. This will help prevent gouging the work ar ea.[...]

OPERATION 2407TL 01/11 Operation Section 4-31 © 201 1 Alam o Group Inc. OPERA TION PEELING AND SCRAPING Use a slight bucket angle, travel forward and hold lift control forward to st art the cut. Make a short 5 to 8 foot angle cut and break out cleanly . With bucket level, st art a cut at notch approximately 2 inches deep. Hold dep th by feathering[...]

OPERATION 2407TL 01/11 Operation Section 4-32 © 201 1 Alamo Group Inc. OPERA TION LOADING LOW TRUCKS OR SPREADE RS FROM A PILE For faster load ing, minimize angle of turn a nd length of run between pile and spreader . Back grade occasionally with a loaded bucket to keep working surface free of rut s and holes. Also, hold lift control forward so fu[...]

OPERATION 2407TL 01/11 Operation Section 4-33 © 201 1 Alam o Group Inc. OPERA TION BACKFILLING Approach pile wit h a level bucket. Poor methods actually move no more dirt and make it more diff icult to hold a level grade. Do not use bucket in dumped position for bulldozing. This method , shown above, will impose severe shock loadings on dump linka[...]

OPERATION 2407TL 01/11 Operation Section 4-34 © 201 1 Alamo Group Inc. OPERA TION Leave dirt in bucket. Dumping o n each pass wastes time. Operate tractor at righ t angles to ditch. T ake as big a bite as tractor can ha ndle without lugging down.[...]

OPERATION 2407TL 01/11 Operation Section 4-35 © 201 1 Alam o Group Inc. OPERA TION Leave dirt which drif ts over side of bucket for final cleanup. Pile dirt on high side for easier backfilling on a slope. HANDLING LARGE HEA VY OBJE CTS 1. Using front end loaders for handling large hea vy objects such as la rge round or re ctangular bales, logs and[...]

OPERATION 2407TL 01/11 Operation Section 4-36 © 201 1 Alamo Group Inc. OPERA TION 8.2 Operating Bale Spear (Optional Att achment) Operate the bale spear using extreme caution . Sharp point s on bale spear can cause serious injur y or death. Because of size and we ight of large bales, e xtreme care must be t aken in handling them. Be aware of fo rc[...]

OPERATION 2407TL 01/11 Operation Section 4-37 © 201 1 Alam o Group Inc. OPERA TION Carry bales as low to th e ground as possible to allow maximum visibility and avoid tipping. 9. Loader Storage Properly prep aring and storing the loader at the end of t he season is critical to ma in taining it s appearance and to help ensure years of depend able s[...]

OPERATION 2407TL 01/11 Operation Section 4-38 © 201 1 Alamo Group Inc. OPERA TION T ransport only at speeds where you can maint ain control of the equipment. Seriou s accident s and injuries ca n result from operating this equipment at high sp eeds. Unders t and the T ractor and Implement and how it handles before transporting on street s and high[...]

OPERATION 2407TL 01/11 Operation Section 4-39 © 201 1 Alam o Group Inc. OPERA TION 10.1 T ransporting on Public Roadways Inherent hazards of operating the tr actor and implement and the possibilit y of accidents are not left behind when you finish working in an area. Therefore, the op erator must empl oy good judgement an d safe operation practice[...]

OPERATION 2407TL 01/11 Operation Section 4-40 © 201 1 Alamo Group Inc. OPERA TION Extreme caution should be used wh en transporting the tractor an d implement on public roadways. The tractor must be eq uipped with all required safety warn ing featur es includin g a SMV emb lem and fla shing warnin g lights to a lert drivers of the tractor’s pres[...]

OPERATION 2407TL 01/11 Operation Section 4-41 © 201 1 Alam o Group Inc. OPERA TION 10.2 Hauling the T racto r and Implement Before transporting a loade d tractor and imple ment, measure the height and width dimension s and gross weight of the complete loaded unit. Ensure that the load will be in compliance wit h the legal limits set for the areas [...]

OPERATION 2407TL 01/11 Operation Section 4-42 © 201 1 Alamo Group Inc. OPERA TION 1 1. T roubleshooting Guide TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Loader slow or will not lif t Hydraulic oil too heav y . Change to proper oil. and/or dump Oil filter plugged. Clean or replace filter . Hydraulic pump worn. Repai r or replace pump. Oil line restrict[...]

OPERATION 2407TL 01/11 Operation Section 4-43 © 201 1 Alam o Group Inc. OPERA TION PROBLEM POSSIBLE CAUSE REMEDY Insufficie nt lift cap acity Load is greater than boom Check loader specifications. lif t cap acity . Improper hydraulic pump Repair or replace pump. operation. Internal lift cylinder l eakage. Replace any worn part s and install a seal[...]

[...]

Maintenanc e Section 5-1 MAINTENANCE SECTION[...]

MAINTENANCE 2407TL 0 1/11 Maintenance Section 5-2 © 201 1 Alam o Group Inc. MAINTENANCE READ, UNDERST AND, and FOLLOW the following Safety Messag es. Serious injury or death may occur unless care is t aken to follow the warnings and instructions st ated in the Safety Messages. Always use good common sense to avoid hazards. (SG-2) Never interfere w[...]

MAINTENANCE 2407TL 0 1/11 Maintenance Section 5-3 © 201 1 Alam o Group Inc. MAINTENANCE NEVER perform maintenance benea th a raised loader unless lo ader is properly supported to prevent accident al lowering. Do Not fill fuel tank while engine is running. Refuel only after engi ne has cooled down. If fuel is spilled, move machine away from the are[...]

MAINTENANCE 2407TL 0 1/11 Maintenance Section 5-4 © 201 1 Alam o Group Inc. MAINTENANCE Lubrication Schedule Before operating your Loader , take the time to inspect a nd re pair any da mage to the machine or tracto r . Only a minimum of time and ef fort is required to regula rly main tain this machine to pr ovide long life and trouble fre e operat[...]

MAINTENANCE 2407TL 0 1/11 Maintenance Section 5-5 © 201 1 Alam o Group Inc. MAINTENANCE Daily Maintenance Regular maintenance of your loader and hydraulic system will insure maximum load er efficiency and long life. 1. Ch eck fluid level of tracto r hydraulic syste m before starting each day’s operation. If necessa ry , add hydraulic oil as reco[...]

MAINTENANCE 2407TL 0 1/11 Maintenance Section 5-6 © 201 1 Alam o Group Inc. MAINTENANCE Cylinder Service Loader cylinders are designed to be re liable and easy to service. If a cylinder sh ould malfunctio n during warranty perio d, return co mplete cylinde r assemb ly , without disassembling, to your authorized service depar tment or cont act your[...]

MAINTENANCE 2407TL 0 1/11 Maintenance Section 5-7 © 201 1 Alam o Group Inc. MAINTENANCE Lif t and Bucket Cylinder Reassembly Note: Be careful not to dama ge seals and o-rings o n edges or holes in cylinder tube. Inspect and remove burrs and sharp edges if necessary befo re reassembly . 1. Plac e rod se al (3) into g roove inside cylinder he ad. No[...]

MAINTENANCE 2407TL 0 1/11 Maintenance Section 5-8 © 201 1 Alam o Group Inc. MAINTENANCE St o r a g e NOTE: When loader hydraulics are d isconnected from tractor , the tractor hydraulic circuit must be complete d. Failure to do so will result in tractor hy draulic pump damage. 1. S tore loader with attachment securely attached . 2. Place dust caps [...]

MAINTENANCE 2407TL 0 1/11 Maintenance Section 5-9 © 201 1 Alam o Group Inc. MAINTENANCE 3. Do not remove attachment from store d loader . 4. Do not allow c hildren to play on or aroun d loader .[...]

MAINTENANCE 2407TL 01/11 Maintenance Section 5-10 © 201 1 Alam o Group Inc. MAINTENANCE Proper T orque for Fasteners The chart lists the cor rect tightening torque fo r fastener s. When bolt s are to be tightened or re placed, refer to this chart to determine the grade of bolts and the prop e r torque except when specific torque valu es are assign[...]

MAINTENANCE 2407TL 01/11 Maintenance Section 5-11 © 201 1 Alam o Group Inc. MAINTENANCE[...]

MAINTENANCE 2407TL 01/11 Maintenance Section 5-12 © 201 1 Alam o Group Inc. MAINTENANCE[...]

[...]

RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser ( “Purchaser”) that the goods purchased are free from defects in material or[...]

T O THE OWNER/OPERA T OR/DEALER T o keep your implement running ef ficiently and safely , read your manua l thoroughly and follow these d irections and the Safety Messages in this Manua l. The T able of Contents clearly id entifies each section wher e you can easily find the informa tion you need. The OCCUP A TIONAL SAFETY AND HEAL TH ACT (1928.5 1[...]

2407TL -SOM-01/ 1 1 P/N F-4003C Printed U.S.A 2407TL LOADER[...]