Sharp AR-M620N инструкция обслуживания

PART 1: GENERAL INFORMATION • BEFORE USING THE PRODUCT • MANAGING THE MACHINE • PERIPHERAL DEVICES PART 2: COPIER OPERATION • MAKING COPIES • CONVENIENT COPY FUNCTIONS • MACHINE MAINTENANCE (FOR COPYING) • DOCUMENT FILING FUNCTION • SPECIFICATIONS 1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 Page OPERATION MANUAL (for general information and cop[...]

Note: This eq uipmen t has been tested an d found to c omply w ith the limits fo r a Class B digital device, pursuan t to P art 15 of the FCC Rules. Thes e limits ar e desig ned to p rovide reasona ble prot ection again st harmf ul int erference in a residenti al in stallati on. T his equi pment gen erates, uses and can radiat e radio frequenc y en[...]

Part 1: General Information[...]

[...]

0-1 PRODUCT CONFIGURATIONS The table below shows the produ ct models cov ered by this manu al. (As of F ebruary 2 004) OPERATION MANUALS The fol lowing operation manual s are provi ded for the machine . Pleas e read the ap propri ate manua ls as need ed for the featu res you wish to l earn abou t. ● Operation m anual (for gen eral in formation an[...]

0-2 Imprope r instal latio n may damage thi s produc t. Pleas e note the fol lowing duri ng init ial ins tallat ion and whe never th e mach ine is m oved. 1.The m achine should be i nstalled near an access ible power outlet fo r easy c onnect ion. 2.Be sur e to conne ct the po wer cord onl y to a power outle t that meets the specif ied voltag e and[...]

0-3 CAUTIONS 1.Do n ot touc h the pho toconduc tive dru m. Scrat ches or sm udges on the drum wil l ca use dir ty prints . 2.The fusin g unit is extremely hot. Exe rcise ca re in thi s area. 3.Do not loo k direc tly at th e ligh t source. D oing s o may dam age y our eyes. 4. Four a djuste rs are pr ovide d on all opt ional s tand/p aper dra wer un[...]

CAUTIONS 0-4 Laser Information Wave length 785 nm +10 nm -15 nm Pulse ti mes North Am erica: 55 cpm / 62 cp m model: (3.1 µs ± 3 .1 ns)/7 m m 70 cpm m odel: (2.7 µs ± 2 .7 ns)/ 7 mm Europe: 55 cpm / 62 cp m model: (3.7 µs ± 3 .7 ns)/7 m m 70 cpm m odel: (3.2 µs ± 3 .2 ns)/ 7 mm Output power Max 0. 8 mW At the productio n line, the outp ut p[...]

0-5 CONTENTS Page PRODUCT CONFIGURATIONS .......................... ........ 0-1 OPERATION MANUALS..................... ................. ........ 0-1 INSTALLATION REQ UIREMENTS...................... ........ 0-2 CAUTIONS .............. ............ ................ ................. ........ 0-3 ● Laser Inform ation ............. ...............[...]

CONTENTS 0-6 CHAPTER 5 CONVENIENT CO PY FUNCTIONS SPECIAL MODES ...................... ........... ................. ...... 5-2 ● General p rocedure fo r using s pecial f unctions ..... 5-2 ● Margin sh ift ... ................. ................ ............ ........... 5-3 ● Erase ...... ................. ........... ................. .......[...]

1-1 CHAPTER 1 BEFORE USING THE PRODUCT This ch apter con tains b asic inf ormation that shou ld be read b efore us ing the product. Page INTRODUCTION ....................... ........... ................. ................. ........... ..... 1-2 MAIN FEATURES ...................... ................. ........... ................. ................ 1-3 [...]

1-2 INTRODUCTION Than k you f or pur chasi ng a SH ARP di gital mul tifun ctio n copie r. Please read thi s manual before u sing the machi ne. In particu lar, be s ure to r ead "INS TALLATIO N REQU IREMENT S" before using the mac hine. Please keep thi s manu al clos e at han d for re ference whenever necess ary. This ma nual provide s gen[...]

1-3 1 MAIN FEATURES The di gital mul tifunc tion copi er is c apable of p erformi ng a var iety o f functions . This page shows features related to the cop y functio n. ● Sort mo de See pa ge 1-3 ● Group mod e See page 1-3 ● 2-sided Co py See p age 1-3 ● Expo sure Ad jus tment s See p age 1- 3 ● Reductio n/Enlar gement Se e page 1 -4 ● [...]

MAIN FEATURES 1-4 Reduction / Enlargement See page 4-15 Copies can be enlarged or reduc ed to the d esired size . XY Zoom See page 4-18 Separat e ratio setti ngs ca n be sele cted for the length and width of a co py. Margin Shift See page 5-3 Margins can be a dded to copie s. Erase See page 5-4 Shadows that appear around the edges of copies of book[...]

MAIN FEATURES 1-5 1 Job Build See page 5-8 When y ou ha ve a v ery lar ge nu mber of or igina ls, the pages can be scann ed in s ets. Tandem Copy See page 5-9 Two mac hines c an be used to run a large c opy job in para llel. Covers/ inserts See page 5-11 Front co vers , back co ve rs, and insert s can be added . These can also be co pied o n. Trans[...]

MAIN FEATURES 1-6 Tab Copy See page 5-26 Copying is possib le on the ta bs of t abbed paper . Card Shot See page 5-28 The front an d back of a card can be copied onto one sheet of pape r. This func tion is con venient for m aking c opies fo r certifi catio n purpos es and he lps s ave pape r. Job programs See page 5-31 Variou s step s of a copy ope[...]

MAIN FEATURES 1-7 1 Offset mode See page 3-4 Each s et of out put can be offset sl ightly from oth er sets for e asy separ ation. Staple sort mode See page 3-4 Sets of copie s can be automat ically stapl ed. Saddle stitch See page 3-5 When a saddl e sti tch fini sher i s insta lled, copies can be automat ically folde d in h alf and s taple d at the[...]

MAIN FEATURES 1-8 Energy saving featu res This pro duct has t he foll owing tw o power reduc ing m odes th at confor m to the Energy Star guid elines to help conserv e natural reso urces an d reduc e environme ntal po llution. Preh eat mo de The p reheat m ode i s the fi rst le vel of p ower reduction. The po wer is reduc ed to the fuser un it a p [...]

1-9 1 PART NAMES AND FUNCTIONS Exterior Saddle stitc h finisher (AR-F1 6) *1 / Finisher (AR-F15) *1 (See page 3-2) Punch module (AR-PN4A) *1 (See page 3-2) Inserter (AR-CF 2) *1 ( See page 3 -14) Automatic do cumen t feeder (See page 4 -2) This au tomati cally fee ds and s cans m ultiple sheet origin als. Both s ides of two- sided or iginals can be[...]

PART NAMES AND FUN CTIONS 1-10 Interior Duplex unit Open thi s co ver to r emove a misf eed fr om the fusing u nit area. Fusing unit Toner ima ges are fused here. Cover of the duplex unit Open when a misf eed has occurre d in dup lex un it. Toner cartridg e *2 This ho lds t oner for pr inting . The tone r cartrid ge must be r eplaced when i ndicate[...]

PART NAMES AND FUN CTIONS 1-1 1 1 ■ ■ ■ ■ Other optional equipm ent ● ● ● ● Printer expansio n kit (AR-P1 9) This is requ ired to add the prin ter fun ction to models that do not includ e the printer function as a standar d featu re. The kit in clude s a ne twork interfa ce that al lows the machi ne to b e use d as a network printer[...]

PART NAMES AND FUN CTIONS 1-12 Operati on pa nel Touch panel The mac hine st atus, mess ages and to uch k eys are display ed on the panel. The docum ent filing, copy, network sc anner* 1 , and fax* 2 functi ons are used by switchi ng to the sc reen for the desired func tion. See th e followin g page. Mode sele ct key s and indic ators Use to c hang[...]

PART NAMES AND FUN CTIONS 1-1 3 1 Touc h pa nel The tou ch panel scre ens sho wn in this man ual a re printed images, and may app ear differ ent from the actual sc reens. ■ ■ ■ ■ Using the touch panel [Examp le 1] Items on the touch pa nel are easi ly se lecta ble by touch ing t he key as soci - ated with th e item with a finger. S electio [...]

PART NAMES AND FUN CTIONS 1-14 ■ ■ ■ ■ Job status screen (com mon to print, copy , fax, network sc an and Internet fa x) This sc reen is di splayed when the [JOB S TATUS] k ey on the operation panel is pres sed. This sc reen can be u sed t o displa y the "JOB QUEU E" (sh owing stored j obs and the c urrent job) or the "COMPL [...]

PART NAMES AND FUN CTIONS 1-1 5 1 [PRINT JOB] key This dis plays the print j ob list of print mode (copyin g, printing , fax recept ion, Interne t fax recept ion, an d self printin g). [E-MAIL/FTP] k ey This di splay s the transmi ssion s tatus and finished jobs of sca n mode (Sc an to e-mai l, Scan to FTP , and Sc an to Sha rpDes k) when the ne tw[...]

1-16 TURNING THE POWER ON AND OFF The mac hine has two pow er switc hes. Th e main power swi tch can be found at the uppe r right after the front cov er is open ed. The p ower swit ch is loca ted at th e upper l eft of th e right s ide of the machi ne. The two switches are nor mally u sed as follows : Main power switch: Nor mally kept in the ON pos[...]

1-1 7 1 AUDITING MODE Auditi ng mod e ca n be ena bled to kee p track of the numb er of pages printe d and transm itted ( scann ed) by each accou nt (up to 500 a ccounts can be establ ished ). The page co unts c an be viewed a nd tot aled as n eeded . <This mode is e nabl ed in the ke y ope rator progr ams s eparat ely f or th e cop y, p rinter [...]

[...]

2-1 CHAPTER 2 MANAGING THE MACHINE This ch apter explai ns how to loa d paper, repla ce the tone r cartridg e, and remo ve pap er misfe eds. It also co ntains informa tion ab out su pplies . Page LOADING PAPE R ........................... ............ ................ ................. ........... 2-2 ● Identifyi ng the trays ................. ..[...]

2-2 LOADING PAPER If the paper runs o ut dur ing prin ting, a message will appear i n the disp lay. Follow t he proce dure bel ow to lo ad paper. Identifying the trays The tra ys are ide ntifie d usin g numb ers as shown b elow. For the ty pes an d sizes of paper that can be used in each t ray, see page 2 -8. Loading paper in paper tray 1 - tray 2 [...]

LOADING PAPER 2-3 2 3 Gently push tray 1-tray 2 into the ma chine. Push t he tr ay f irml y all the way i nto the machi ne. 4 Set the paper type. If the pape r siz e was changed from an inch s ize to an AB size, o r from an AB size to an inch size, or if the paper ty pe was cha nged, b e sure to cha nge the appropr iate setting s as exp lained in &[...]

LOADIN G PA PER 2-4 ■ ■ ■ ■ Loading tabbed pap er When usi ng tabbed paper, follo w the steps below to attach t he special guide to the divi der plate at the bo ttom edge of t he tabbe d paper . (Tabbed paper cannot b e used in tray 4.) 1 Take out the tabbed paper guide. The gu ide i s store d inside the left s ide of the machi ne as sho wn[...]

LOADING PAPER 2-5 2 Loading paper in paper tray 5 (op tional large capacity tray) The large capac ity tray ca n hold up to 3 ,500 shee ts of 8 -1/2" x 11" s ize (A4) SHAR P stan dard pap er (20 l bs. (80 g /m 2 )). If you wish to change the paper s ize, ple ase co nsult yo ur dealer ( the pape r size m ust be cha nged by a service technic[...]

LOADIN G PA PER 2-6 Loading paper in the bypass tray The by pass tr ay can be used to print on pl ain pa per, pos tcards, label she ets, ta bbed p aper, and other speci al paper s. When us ing S HARP stan dard paper, up to 100 shee ts can be load ed (up to 20 pos tcards ) for con tinuou s pr inting simila r to the other trays . For the pa per types[...]

LOADING PAPER 2-7 2 ■ ■ ■ ■ Important points when us ing the bypass tray ● Be sure to load 5- 1/2" x 8-1/2 " paper, A5 pa per, and p ostcards as shown ( 1) ho rizont al load ing i n the diagr am below. (1):Hori zontal loading (2):Ve rtical loadi ng ● When loa ding pl ain paper other tha n SHARP standar d paper, s pecial m edia[...]

LOADIN G PA PER 2-8 Specifications of paper tra ys (Types and sizes of paper tha t can be used in the trays) The spe cificat ions for the types and siz es of pape r that can be loaded i n the pa per trays are sho wn belo w. Tray No. (tray nam e) Applica ble pa per types Appl icab le paper siz es Paper weig ht Tray 1 Plain paper (Refer to the nex t [...]

LOADING PAPER 2-9 2 ■ ■ ■ ■ More information on plain paper Incor rect fee ding m ay result in poo r toner fusing ( the toner does n ot adhe re to the paper well and can b e rubbed off), s kewed feed ing, m isfeeds, or oth er failu res. ■ ■ ■ ■ More information on special media that can be used Incor rect fee ding m ay result in poo[...]

LOADIN G PA PER 2-10 Setting the paper type and paper size Follow th ese steps to change the paper type settin g when the p aper type has been change d in a pap er tray. For the paper ty pes that c an be use d in ea ch tray, s ee page 2-8. 1 Press the [CUSTOM SETTINGS] key. The cust om sett ing menu screen will appear . 2 Touch the [PAPER TRAY SETT[...]

LOADING PAPER 2-11 2 8 Select output functions that can be used with the selected tray. Touch the checkboxes under the desired i tems to select them. ■ ■ ■ ■ User type Selec t a "Use r type" wh en the name of the paper type do es not a ppear in the sel ectio ns or when you wish to sele ct the tra y attrib utes yours elf. Touc h th[...]

LOADIN G PA PER 2-12 Setting the paper size when a special size is loaded 1 Perform step s 1 through 5 of "Setti ng the paper type and paper siz e" (see page 2-10) . 2 Touch the [SIZE INPUT] key and then touch the [INCH] tab. The si ze entry palet te appe ars. 3 Touch the key or the key to enter the X (width) and Y (length) di mensions of[...]

2-13 2 CUSTOM SETTINGS The item s that can be se t with th e custom setti ngs are shown b elow. ● Total cou nt . . . . . . . . . . . . . . . . . . The num ber of pages process ed by the machine and optio nal equipmen t can be d isplaye d. (See p age 2- 15) ● Default s ettings . . . . . . . . . . . . . . Used to config ure the s creen con trast,[...]

CUSTOM SETTINGS 2-14 5 Touch the [DATE FORM AT] key. The fol lowing s creen ap pears. 6 If you wish to chang e the format of the date and time, touch the desired format keys. Touch ed keys are high lighted. The sel ected format is appli ed to lists printed out in "LIST PRINT". 7 Touch the [OK] key. You wil l return to the date and tim e s[...]

CUSTOM SETTINGS 2-15 2 About the settings ■ ■ ■ ■ Total count This displ ays the followi ng s heet cou nts (the counts that can be displa yed v ary de pendin g on the o ptions ins talled ): Number of pages output b y the mac hine. Number o f origin al pa ges tra nsmit ted by th e mach ine. Number o f tim es the automa tic d ocument feeder w[...]

2-16 REPLACING THE TONER CARTRIDGES When tone r runs low, a m essage wi ll appea r to infor m yo u that the to ner car tridge m ust be re place d. Follow t he steps below t o replac e the toner cartrid ge. 1 Open the front cover. 2 Remove the toner cartridge gently. Hold the ton er cart ridge with b oth hands as show n in th e illu stratio n, and p[...]

2-17 2 STORAGE OF SUPPLIES Standa rd supp lies for this pr oduct tha t can replace d by the use r incl ude pap er, toner cartrid ges, a nd sta ple car tridges for the fi nisher. ■ ■ ■ ■ Proper storage 1. Store th e supp lies in a locati on that i s: ● clean an d dry, ● at a stabl e temp erature, ● not expos ed to dir ect sun light. 2.[...]

2-18 MISFEED REMOVAL When a mi sfeed has oc curred during p rinting, the message " A MISFEE D HAS OCCURRED". wi ll appear i n the touch panel dis play of t he oper ation panel a nd print ing in cluding copying and fac simile output will stop. The appr oximate mis feed locati ons ar e indica ted w ith " " sh own in the illu stra [...]

MISFEED REMOV AL 2-19 2 Misfeed in the transport area , fusing area, and exit area 1 Remove the duplex unit. Grasp th e finge r hold and gently open the uni t. 2 Remove the misfe d paper as sh ow n in the illustrat ions below. Misfed in the tra nsport ar ea Turn roller rotating knob A in t he direc tion of th e arrow to remove the misfed paper. Mis[...]

MISFEED REMOV AL 2-20 Misfeed in the duplex unit 1 Remove the duplex unit. Grasp th e finge r hold and gently open the uni t. 2 Open the cover of the duplex uni t. 3 Remove the misfed paper. Misfeed in upper part of unit Be car eful not to t ear the misfed paper during removal. Misfeed in lower part of unit Be car eful not to t ear the misfed paper[...]

MISFEED REMOV AL 2-21 2 Misfeed in the paper feed ar ea ■ ■ ■ ■ Misfeed in paper tr ay 1 - tray 2 1 Remove the duplex unit. Grasp th e finge r hold and gently open the uni t. 2 Remove the misfed paper. Turn roller rotating knob A in t he direc tion of th e arrow to remove the misfed paper. 3 If misfed paper is not found i n step 2, pull out[...]

MISFEED REMOV AL 2-22 ■ ■ ■ ■ Misfeed in paper tr ay 3 1 Remove the duplex unit. Grasp th e finge r hold and gently open the uni t. 2 Remove the misfed paper. Turn roller rotating knob A in t he direc tion of th e arrow to remove the misfed paper. 3 Open the lower cover on the left side of the machine. Grasp th e finge r hold and gently ope[...]

MISFEED REMOV AL 2-23 2 ■ ■ ■ ■ Misfeed in the bypass tray 1 Remove the misfed paper from the bypass tray. Be car eful not to t ear the misfed paper during removal. 2 If you did not find a misfeed in step 1, open the side cover and remove the misf eed. 3 Gently close the side cover. 4 Remove tray 1 - tray 2. Grasp th e finge r hold and gent[...]

MISFEED REMOV AL 2-24 ■ ■ ■ ■ Misfeed in the tray 5 1 Open the side cover. 2 Remove the misfed paper. Be car eful not to t ear the misfed paper during removal. 3 Gently close the side cover. 4 Close the bypass t ray. 5 Open the top cover of tray 5. 6 Open the top cover and remove the misfed paper. After re moving the misfed pap er, close th[...]

2-25 2 REMOVING AN ORIGINAL MI SFEED Removing a misfed original from the automatic document feeder If an ori ginal m isfeed o ccurs in th e autom atic doc ument feeder, f ollow the steps belo w to rem ove th e misf ed ori ginal. Check l ocations A and B in the d iagram at l eft to remov e the ori ginal . 1 Removing misfeeds from each location. ● [...]

2-26 TROUBLESHOOTING Check the follow ing troub lesh ooting li st befo re reque sting ser vice as ma ny probl ems c an be f ixed by the user . If you are unab le to sol ve the problem by che cking th e list, t urn off th e main power switch and the power sw itch, unplug the power co rd. Problem s relat ed to ge neral us e of the machine are d escri[...]

TROUBLESHOOTING 2-27 2 Paper fr om the bypa ss tra y misfee ds The pa per si ze and pa per type have not been set. Be su re to se t the pap er siz e and pa per type when usin g spec ial siz e or spe cial type pa pers. (Page 2-1 0) The nu mber of s heets placed on t he bypass tray ex ceeds the max imum nu mber. Do not pla ce mo re than th e max imum[...]

TROUBLESHOOTING 2-28 Print ed paper is wrin kled o r t he image r ubs off easily . Is paper other than SHA RP- recom mended pap er be ing used? Use SHARP -reco mmended pa per. (P age 2-17 ) Is paper size or weight out of the allo wabl e rang e? Use paper in the al lowable r ange. Paper damp? Be sure to st ore pa per in t he wrappe r in a dry locati[...]

3-1 CHAPTER 3 PERIPHERAL DEVICES This cha pter e xplains proced ures fo r using the op tional fi nishe r, saddl e stitch fi nish er, and i nserter . Page FINISHER AND SADDLE STITCH FI NISHER........................ ................ 3-2 ● Part names .............. ................ ....................... ................. ................ 3-2 ● [...]

3-2 FINISHER AND SADDLE STITCH FINISHER The finish er and th e saddle st itch fi nisher i nclude the offset fun ction, whic h offsets ea ch set o f copies fr om the preced ing se t for eas y separ ation . Each set of sorted c opie s can al so be s taple d. The s addle stitch finish er can automati cally s taple a s et of copi es at t he center line[...]

FINISHER AND SADDLE STITCH FINISHER 3-3 3 *For in dex pa per, equi vale nt to 140 -lbs. * For in dex p aper, equi valent to 140- lbs. Specifi cations are subjec t to ch ange fo r improve ment withou t notic e. ■ ■ ■ ■ Supplies The fin isher a nd sad dle stitc h fini sher requ ire t he followi ng sta ple c artridg e: ● Staple cartri dge fo[...]

FINISHER AND SADDLE STITCH FINISHER 3-4 Finishing meth ods ■ ■ ■ ■ Sort mode Sorted s ets will be deliv ered. ■ ■ ■ ■ Group mode Groups of co pies of th e same pag e will be delivered . ■ ■ ■ ■ Offset mode Each se t of cop ies is o ffset from the precedi ng set to allow easy se paration. (The offset func tion opera tes in th[...]

FINISHER AND SADDLE STITCH FINISHER 3-5 3 ■ ■ ■ ■ Original orientation w hen using the stap le sort or punch fu nction When us ing the staple sort or punch function, the origi nal mu st be plac ed in th e followin g orienta tions to enabl e staplin g or punc hing in the des ired pos ition on the pap er. ■ ■ ■ ■ Saddle stitch functio[...]

FINISHER AND SADDLE STITCH FINISHER 3-6 Finishing modes and finish er functions Touch the [OUTPU T] key on th e main s creen o f copy mod e to dis play the s creen t hat allows select ion of so rt, st aple sort, g roup func tion, cen terline stapl ing, and the output tray. [GROUP] ke y (See pag e 3-4.) When Gr oup is select ed, copi es will be gro [...]

FINISHER AND SADDLE STITCH FINISHER 3-7 3 Staple cartridge replac ement and staple jam removal When a fin isher i s inst alled, a mes sage will appear when the stapl e cartr idge runs out of staple s or a s taple jam occur s. Foll ow the proc edure be low to replace the st aple car tridge o r remov e jammed stapl es. ■ ■ ■ ■ Replacing the c[...]

FINISHER AND SADDLE STITCH FINISHER 3-8 ■ ■ ■ ■ Replacing the cartridge in the saddle stit ch finisher Only wh en the s addle stitch f inisher (AR-F16 ) is in stall ed. 1 Open the lower cover of the saddle stitch finisher. When a n option al inse rter is in stall ed, open the fr ont cov er of the i nserter before openin g the lower co ver o[...]

FINISHER AND SADDLE STITCH FINISHER 3-9 3 ■ ■ ■ ■ Removing a staple ja m in the finisher 1 Perform steps 1 to 2 of the procedure for "Replacing the cartridge in the finisher" on page 3-7. 2 Hol ding the knob , lowe r par t (A). 3 Remove any jammed staples. 4 Holding the knob, return part ( A) to its orig inal p osition . 5 Return [...]

FINISHER AND SADDLE STITCH FINISHER 3-10 ■ ■ ■ ■ Removing a staple jam in the saddle sti tch finisher 1 Perform steps 1 to 3 of the procedure for "Replacing the cartridge in the saddle stitch finisher" on page 3-8. 2 Remove the em pty staple case. 3 While pushing down on lever (A) , pull up knob (B) . 4 Remove any jammed staples, [...]

FINISHER AND SADDLE STITCH FINISHER 3-11 3 Removing a misfeed When a misfee d occur s, remo ve the misfed pa per a s explaine d below . ■ ■ ■ ■ General procedure fo r the finisher and saddle stitch fini sher 1 Gently move the finisher/saddle stit ch finisher away from the machine while pressing the button. When an inser ter is inst alled , [...]

FINISHER AND SADDLE STITCH FINISHER 3-12 11 Remove the misfed paper. Be car eful not to tear the misfed pa per du ring remo val . 12 Close the entrance cover of the saddle stitch unit . 13 Turn the right-hand k nob counter clockwise. Then, push the left-hand knob and turn it clockwise. 14 Remove any paper misfed on the exit side of the saddle stitc[...]

FINISHER AND SADDLE STITCH FINISHER 3-13 3 Troubleshootin g finisher/saddle stitch finisher problems Check the list b elow befor e calling for ser vice. * When a hole punch module is ins talled Problem Check Soluti on or cau se Staplin g posit ion is not corre ct (includi ng sadd le stitch ). Stapling posi tion no t set p roperly ? Ch eck the st ap[...]

3-14 INSERTER The inser ter enab les blank sheets or printed s heets to be added to c opy and prin t output a s covers or ins erts withou t printin g. The in sert er also allows fe eding of heavy paper that canno t be fed from t he other tr ays. Printed output can a lso be fed o ne set a t a time from the inserter for stap ling or pu nching wi thou[...]

INSERTE R 3-15 3 Loading paper When loading pa per in the inse rter, lo ad the pap er face up. If the paper has a top edge and bot tom edge, lo ad in the same top -bott om orientat ion as the ori ginal. A djust the paper gui de on the pape r tray to the width o f the paper . When us ing tab bed pap er, place t he pape r as foll ows: Load th e pape [...]

INSERT ER 3-16 ■ ■ ■ ■ Alarm display If the [START] key ind icator on the inserter op eration panel is blin king and the [PUNCH] k ey or [STAPLE] key indi cator is al so blinking or solidl y lit, oper a tion will not st art when t he [STA RT] key is pr essed. Re solve t he problem as indi cated b elow, depe nding h ow the indi cators are li[...]

INSERTE R 3-17 3 Misfeed removal When a misfee d occur s in the inserte r, remov e the m isfed pap er follo wing th e proced ure belo w. ■ ■ ■ ■ Misfeed in the inserte r 1 Gently move the inserter away from t he machine while pressing the butt on. 2 Remove the mis fed paper from the m ain unit. Be carefu l not t o tear the misfed p aper dur[...]

INSERT ER 3-18 Troubleshooting i nserter problems Check th e list be low bef ore cal ling for service. Problem Check Solutio n or cau se Stapling positi on is not co rrect (includi ng saddle stitc h). The des ired sta ple mo de is not selec ted. Select the d esired stapl e mod e at the operati on pane l of the inse rter (page 3-15). The paper i s n[...]

Part 2: Copier Operation[...]

[...]

4-1 CHAPTER 4 MAKING COPIES This c hapter e xplai ns the ba sic procedu res f or maki ng cop ies, inc ludi ng selecti on of th e copy rati o and o ther cop y setting s. Page AUTOMATIC DOCUMENT FEEDER............... ................. ................. ..... 4-2 ● Acceptab le originals ................ ............................ .................[...]

4-2 AUTOMATIC DOCUMENT FEEDER The aut omatic docu ment fee ding f unction autom aticall y feed s origi nals in to the m achin e, mak ing conti nuous copyin g possib le. In a dditio n, both s ides of t wo-si ded sh eet origi nals can be simu ltaneo usly sc anned. This fu nction is conven ient whe n you hav e a la rge numb er of ori ginal pa ges to s[...]

4-3 4 PLACING ORIGINALS ■ ■ ■ ■ Using the automatic document feeder 1 Open the document cover, make sure t hat an original has not been left on the document glass, and t hen gently close the document co ver. 2 Adjust the original guides to the size of the originals. 3 Place the originals face up in t he document feeder tray. Place the orig [...]

PLACING ORIGINALS 4-4 ■ ■ ■ ■ Standard original place ment orientations Place o riginal s in th e document feeder tray or on the document glass s o that the top and bott om of the origin al is pos ition ed as shown in th e illustr ation . If not, staples will be incor rectly positio ned and s ome sp ecial features may n ot gi ve th e expect[...]

4-5 4 CHECKING THE SIZE OF A PLACED ORIGINAL If the placed o riginal i s a stand ard siz e, the size wi ll be automatic ally detecte d (aut omatic origin al det ection fun ction ) and di splay ed in the touch panel. M ake sur e that t he correc t size has been de tected. (A) : The origi nal size i s displ ayed. (B) : [AUTO] appears when the automa [...]

4-6 STORING, DELETING, AND USING ORIGINAL SIZES Up to 9 sp ecial or iginal s izes ca n be stored . Store d sizes c an be eas ily calle d up and ar e not eras ed if the po wer is turned of f. Stor ing a frequ ently use d ori ginal si ze saves you th e trouble o f manual ly setti ng the siz e each time yo u copy th at size o f docu ment. ● To cance[...]

4-7 4 NORMAL COPYING This sect ion desc ribe s the nor mal copy ing p rocedur e. Making copies with the autom atic document feeding function ■ ■ ■ ■ 1-sided copies of 1-s ided originals 1 Place the originals in the document feeder tray. (pages 4-3 t o 4-6) 2 Ensure that the 1-sided to 1-sided copy mode is selected. The one-s ided to one- si[...]

NORMAL COPYING 4-8 7 Select the desired output mod e (page 4-9). The sort mod e is the default mo de. To s elect the gr oup mode, touch the [OUTPUT] key, then touch the [GROUP] key on the output s etting screen, and t hen tou ch th e [OK] key on the setting screen . 8 Use the numeric keys to set the desired number of copies. Up to 999 c an be set. [...]

NORM AL COPY ING 4-9 4 ■ ■ ■ ■ Copy output (sort and gr oup) Exampl e: Makin g five se ts or five copies e ach o f three orig inals ● ● ● ● Sorting copies into sets ● ● ● ● Grouping copies by page ■ ■ ■ ■ Selecting the o utput tray (w hen an optio nal finisher or saddle stitch finisher is installed) When the [FINI SH[...]

NORMAL COPYING 4-10 Automatic two-sided copying using the automatic document feeding function The ma chine can automa tically copy t wo-si ded ori ginal s, sa ving yo u the troubl e of m anually turn ing over each origin al page. 1. Automatic two-sided copying fr om one-sided originals 2. Automatic two-sided copy ing from two-sided originals 3. Aut[...]

NORM AL COPY ING 4-1 1 4 Copying from t he document glass When co pying original s which cann ot be fed fr om the auto matic doc ument fe eder such as thick ori ginals , open the docume nt cove r and c opy the or iginal s fro m the do cument glass. ■ ■ ■ ■ 1-sided copies of 1-s ided originals 1 Place the original on the document glass. (pag[...]

NORMAL COPYING 4-12 4 Select the desired output mode. (page 4- 9.) Group m ode is the default mo de. To sele ct so rt mo de, touch the [OUTPUT] key, touch the [SORT] key in the scree n that appears , and then touc h the [OK] key. 5 Use the numeric keys to set the desired number of copies. Up to 999 c an be set. If you are o nly maki ng a single cop[...]

NORM AL COPY ING 4-1 3 4 Automatic two-sided copying from th e docu ment glass The fo llowing two-sid ed co pying functio n is possib le. T he copy pape r is t urned over automati cally, a llowin g eas y two- sided co pying . 1 Place an original on the document glass. (pages 4-3 to 4-6) ● Align the cor ner of the original with the tip of the arro[...]

4-14 ADJUSTING THE EXPOSURE Select an app ropriat e expo sure mode f or the or igin al to b e copied. The se lecti ons are AUTO, T EXT, TEXT/PHO TO and PHO TO. ■ ■ ■ ■ Automatic exposure adj ustment The defaul t exposure setting is " AUTO", whic h automa tically adjusts the expo sure for the origina l. To se lect the exposure m od[...]

4-1 5 4 REDUCTION/ ENLARGEMENT/ZOOM Reducti on and enlargem ent ratio s can be selec ted au tomatical ly or m anually . ● Automati c selecti on: Auto image (see be low) ● Manual s electio n: Pr eset copy r atios/z oom (see page 4-1 6) Automatic selection (auto im age) The redu ction or e nlargement ratio will be se lected automatically based on[...]

REDUCTION/ENLARGEMENT/ZOOM 4-16 Manual selection (preset copy ratios/zoom) Five pre set enlarge ment and five pre set reducti on copy r atios (max . 400%, min. 2 5%) ca n be selected . In addi tion, the zoom keys can be u sed to select a ny rati o from 25% to 400% i n incre ments of 1 %. <The key operator prog ram on page 14 of the key operator&[...]

REDUCTION/ENLARGEMENT/ZOOM 4-1 7 4 6 Make sure that an appropriate paper size has been selected based on the selected ratio . Auto pa per selec t displa y 7 Use the numeric key s to set the desired number of copies. Up to 999 c an be set . If yo u ar e only making a single copy , the co py can be made wi th the copy nu mber displ ay showi ng "[...]

REDUCTION/ENLARGEMENT/ZOOM 4-18 XY ZOOM The XY ZOOM fea ture al lows the h orizon tal and verti cal cop y ratios to be cha nged se parat ely. The ratios can se t from 25% to 400% in i ncrements of 1%. Exampl e: Selectin g 100% fo r the len gth and 50% for the width 1 Place the original in the document feeder tray or on the document gl ass. (pages 4[...]

REDUCTION/ENLARGEMENT/ZOOM 4-1 9 4 7 Use the reduction, enlargement, and ZOOM ([ ], [ ] ) keys to change the copy ratio in the verti cal (Y) direction. A fixed ratio key will no t beco me highlig hted when touc hed. The zo om key s ca n be used to c hange the ratio from 25% to 400 % in increm ents o f 1%. If needed , you can tou ch the [X] k ey onc[...]

4-20 SPECIAL PAPERS Specia l pape rs includ ing tr anspare ncy fil m, pos tcards and tabb ed pape r must b e fed thr ough the bypas s tray. 1 Place the original in the document feeder tray or on the document gl ass. (pages 4-3 to 4-6) 2 Load the special paper in the bypass tray. See page 2- 8 for the specifi catio ns o f pape r that ca n be used in[...]

5-1 CHAPTER 5 CONVENIENT COPY FUNCTIONS This ch apter exp lains sp ecial -purpos e functio ns, sto ring of cop y settin gs, and othe r conven ient func tions. P lease select and read section s of thi s chapte r as nee ded. Page SPECIAL MODES...................... ................. ............................ ................ 5-2 ● General proced[...]

5-2 SPECIAL MODES Touch th e [SPECIAL MODES] k ey in the mai n screen of c opy mo de to open the s pecial modes sc reen. The following functions can be s elected in the special modes screen. Margi n shift (page 5-3) Erase ( page 5- 4) Dual p age cop y (page 5-5) Pamphlet copy (page 5-6) Job build (page 5-8) Tandem copy (page 5-9) [OK] key on the sp[...]

SPECI AL MODES 5-3 5 Margin shift The margin sh ift functi on will automa tically shift the text or ima ge on the copy pape r approxi mately 1/ 2" (10 mm) in its init ial setti ng. This fu nction i s conve nient wh en sta pling or binding copie s with a string. 1 Touch the [MARGIN SHIFT] key on the special modes screen. The margin s hift setti[...]

SPEC IAL MODE S 5-4 Erase The erase fu nctio n is used to erase the s hadow line s on co pies prod uced wh en copyi ng thick or iginal s or books . The erase m odes that can be se lecte d are s hown be low. T he eras e wid th is ap proxim ately 1/2" (10 mm) in it's initi al setting. EDGE ERA SE Elimin ates shad ow lines ar ound the edges [...]

SPECI AL MODES 5-5 5 Dual page copy The dual page copy function produ ces sep arate cop ies o f two docume nts plac ed side by side on t he doc ument gl ass. This fu nction i s espe cially us eful when co pying bo oks a nd other boun d documen ts. [Exampl e] Copying right an d left p ages o f a book 1 Touch the [DUAL PAGE COPY] key on the special m[...]

SPEC IAL MODE S 5-6 Pamphlet copy The pamph let copy functi on is used to arr ange cop ies in proper or der fo r eventu al cente r-staplin g and fold ing int o a bookl et. Two ori ginal pa ges are copie d onto e ach side o f copy p aper. Four pages a re, t heref ore, co pied on to o ne sh eet. This fu nction i s conve nient fo r arrangi ng co pies [...]

SPECI AL MODES 5-7 5 5 Select whether or not you wish to copy on the cover ("YES" or "NO"). 6 Select the paper tray for the cover. The curr ently s electe d paper t ray for th e cover i s displayed . The size an d type of paper i n the cu rrently select ed tray is displa yed. In the exam ple scr een above, 8- 1/2" x 11"[...]

SPEC IAL MODE S 5-8 Job build Use job bu ild mo de when y ou need to c opy mo re origina l pages than can b e load ed at once i n the doc ument feed er (the max imum n umber of p ages that ca n be lo aded is 15 0). Thi s functi on all ows the or igin al page s to be scanned in sets. [Exampl e] Copying 300 pa ges of 8-1/2" x 11 " origi nal[...]

SPECI AL MODES 5-9 5 Tand em c opy Two mac hines co nnecte d to the same network c an be used to r un a la rge copy job in p arallel . By div iding the job in half, appr oximate ly half th e time is requ ired to c omple te the j ob. To use this function, two machines must be connected to your network as network printers. Even if more machi nes are [...]

SPEC IAL MODE S 5-10 5 Press the [START] key. NOTES ● To p erform tandem cop ying, t he se rver mach ine and cl ient ma chine must meet cer tain cond itions . After the [STA RT] key is pressed on the server machi ne, the ser ver ma chine verifies that the condit ions have been met. If the co nditions have not been met, tand em cop ying does no t [...]

SPECI AL MODES 5-11 5 Covers/inserts A differ ent type of pap er can be i nserted in po sitio ns cor respond ing to front a nd bac k cov ers of a copy job wh en the automat ic docume nt feedin g function is used. A d ifferent ty pe of paper ca n also be automatica lly ad ded as an in sert at speci fied pa ges. As an ex ample , tabbed pap er can b e[...]

SPEC IAL MODE S 5-12 ■ ■ ■ ■ Procedure for inse rting front and bac k cover paper The pape r for the front cover is ca lled the front co ver paper ("FRONT COV ER" in the touch panel). The pap er for the back cove r is call ed the back cover p aper ("BACK CO VER" in the touc h pane l). ● Examp les of in sertion methods [...]

SPECI AL MODES 5-13 5 ■ ■ ■ ■ Procedure for add ing inserts You c an hav e diffe rent pape r auto matical ly in serted as an insert at a sp ecifi ed pag es. Two types of inser t pap er can b e use d. These are spe cifie d with th e [INSE RTION TYPE A SE TTING] k ey and [INSER TION TYP E B SETTI NG] in the touch panel. Tabbed pa per can be u[...]

SPEC IAL MODE S 5-14 8 Touch the [INSERTION SETTINGS] key to specify the pages where you wish to insert the insert papers of [INSERTION TYPE A SETTING] and [INSERTION TYPE B SETTING]. 9 Touch the [INSERTION TYPE A] key or the [INSERTION TYPE B] key, enter t he page number where y ou wi sh to insert the insert paper with the numeric keys, and then t[...]

SPECI AL MODES 5-15 5 ■ ■ ■ ■ Checking , editing, and deleting cov er/insert pages The [PA GE LAYO UT] key appe ars aft er covers /inserts settin gs are con figured ( the setting s of step 1 th rough step 7 on pages 5-12 a nd 5-13). The [PAG E LAYO UT] key is u sed for the followi ng: ● To dis play the status of cover s/inse rts p ages ?[...]

SPEC IAL MODE S 5-16 ■ ■ ■ ■ Examples of cove rs and inserts The re lations betwe en the or igina ls and f inish ed copie s whe n cover s or i nserts are ins erted ar e sh own on the followi ng pages. Covers ● One-sid ed co pying of one-s ided ori ginals (pag e 5- 17) ● One-s ided co pying of tw o-sided orig inals (pag e 5- 19) ● Two-[...]

SPECI AL MODES 5-17 5 ■ ■ ■ ■ Covers (One-sided copying of one-s ided originals) One- sided co pies ar e made of the fo llowing o ne-side d origi nals. 1st page 2nd pa ge 3r d page 4th page 5th pa ge 6th page 1 2 3 4 5 6 Copyin g on c over Resu lting cop ies Front co ver B ack cove r No copy ing No copy ing One-si ded copying No copying Two[...]

SPEC IAL MODE S 5-18 ■ ■ ■ ■ Covers (T wo-sided copying of one-si ded originals) Two- sided co pies are made of the fo llowi ng one-s ided ori ginals. 1st page 2nd pa ge 3r d page 4th page 5th pa ge 6th page 1 2 3 4 5 6 Copyin g on c over Resultin g copies Front co ver B ack cove r No copy ing No copy ing One-si ded copying No copying Two-s[...]

SPECI AL MODES 5-19 5 ■ ■ ■ ■ Covers (One-sided copying of Two-s ided originals) One- sided co pies are made of the fo llowing t wo-si ded orig inals . 1st page 2nd pa ge 3r d page 1 2 3 4 5 6 Copyin g on c over Resu lting cop ies Front co ver B ack cove r No copy ing No copy ing One-si ded copying No copying Two-si ded copying No copying N[...]

SPEC IAL MODE S 5-20 ■ ■ ■ ■ Covers (T wo-sided copying of two-sid ed originals) Two- sided co pies are m ade of the fo llowi ng two-si ded or igina ls. 1st page 2nd pa ge 3r d page 1 2 3 4 5 6 Copyin g on c over Resultin g copies Front co ver B ack cove r No copy ing No copy ing One-si ded copying No copying Two-si ded copying No copying N[...]

SPECI AL MODES 5-21 5 ■ ■ ■ ■ Inserts (One-sided copying of one-si ded originals) One- sided and two-s ided cop ying is perfo rmed us ing the follo wing on e-sided orig inals. T he in sert is added as the t hird page . ■ ■ ■ ■ Inserts (One-sided copying of two-si ded originals) One- sided and two-sid ed cop ying is pe rformed using [...]

SPEC IAL MODE S 5-22 Transparency film with insert sheets When cop ying onto transpa rency f ilm, b lank ins ert she ets can b e plac ed between trans parent s heets. ● This function only operat es in "o ne-sided to one- sided" and "two-sided t o one-sided" modes. ● Multip le co pies ca nnot be sele cted in th is mode. ● T[...]

SPECI AL MODES 5-23 5 7 Set the insertion conditions for the insert paper. Select whether or not the in sert paper will be copied on with the (X) keys ([YES] or [ NO]). If [YES] is sel ected, insert paper cannot b e fed from an inserter. The (Y) key shows the tray s elected for the insert paper and the paper size and type. To select a different t r[...]

SPEC IAL MODE S 5-24 1 Touch the [MULTI SHOT] key in the s pecial modes screen (2nd screen). The MULTI SHOT se tting screen will appear. A multi shot icon ( , etc.) will al so appear in the upper left o f the screen to indicate that the function is turned on. 2 Select the numb er of images to be copied onto one sheet of copy pap er. If neede d, the[...]

SPECI AL MODES 5-25 5 Book copy This functi on is conveni ent when y ou wish to com pile copi es of books or other boun d origina ls into an attr active pamphlet f ormat . The two p ages o f the op en book ar e scan ned as a s et, and two pag es each a re copi ed onto the front and bac k sides of the copy paper (fou r pages are cop ied onto on e sh[...]

SPEC IAL MODE S 5-26 Tab co py Copying i s possibl e on th e tabs of ta bbed pa per. Pr epare app ropria te origi nals fo r the tab captions . [Exampl e] Relations between or iginals and t abbed p aper Original Tabbed paper Copy Tab width 8-1/2" x 11" : Maximum of 5/8" (A4 : Maximum of 20 mm) INDEX INDEX Area A Area B ● The tab c a[...]

SPECI AL MODES 5-27 5 1 Touch the [TAB COPY] key i n the special modes screen (2nd screen). The TAB COPY setting scre en will ap pear. A tab cop y icon ( ) w ill also ap pear in th e uppe r left corn er of the screen t o in dicate th at the fu nction is turned on. 2 Set the tab width if necessary and touch the [OK] ke y. Set the t ab width with the[...]

SPEC IAL MODE S 5-28 Card shot When cop ying a c ard, t his func tion allo ws you to co mbine t he front a nd bac k sides on a sin gle s heet of pape r. ● Copying is only poss ible on stan dard siz e paper. ● A copy ra tio cannot be selected when usi ng this function. ● The ima ge canno t be r otated when using thi s function. 1 Touch the [PA[...]

SPECI AL MODES 5-29 5 4 Touch the outer [OK] key. You will return to the main sc reen of cop y mode. 5 Place the original on the docum ent glass. Place t he front side of the orig inal face do wn and clos e the documen t cover. 6 Follow steps 4 through 6 of "Copying from the document glass" (page 4- 12). 7 Press the [START] key. The front[...]

SPEC IAL MODE S 5-30 Mirror image This f unction is used to pr int a mirror image of the origin al. The imag es will be in verted in the right t o left directi on on the copie s. 1 Touch the [MIRROR I MAGE] key in the special modes screen (3rd screen). The [MIRROR IMAGE] key wil l be highl ighted to indicate that th e func tion is turned on , and t[...]

5-31 5 STORING, USING AND DELETING JOB PROGRAMS The steps of up to 10 copy job s can be stored as job progr ams. Job pr ograms can be called up with ease, and are retained even when the power is turned off. By stori ng frequentl y used copy sett ings in a job progra m, you can eliminat e the bo ther of s elect ing the settin gs each time y ou use t[...]

STORING, USING AND DELETING JOB PROGRAMS 5-32 Calling up a job program 1 Press the [# /P] key. 2 Touch the number key of the desired job program. The screen autom ati call y closes and the jo b program is calle d up. A number k ey tha t does not have a jo b prog ram canno t be selecte d. 3 Set the number of copies if needed and then press the [STAR[...]

5-33 5 INTERRUPTING A COPY RUN The cop y of the or igin al scan ned in interru pt mode is output before the rema inder of the i nterru pted co py job. 1 Touch the [INTERRUPT] key. If in terrupt copy ing is possibl e during a copy run, the [INTERRUP T] key will appear. ( If the key do es not app ear, interrup t copyin g is n ot possib le.) When the [...]

[...]

6-1 CHAPTER 6 MACHINE MAINTENANCE (FOR COPYING) This chap ter expl ains pr ocedure s for c leaning th e mac hine, a nd troubles hooting. Page USER MAINTENANCE .............. ................. ............................ ................ 6-2 ● Cleaning the docume nt gla ss and the automatic document feeder ...... . 6-2 TROUBLESHOOTING ...........[...]

6-2 USER MAINTENANCE To ensu re good servic e from this product over a long perio d of time, it is reco mmende d that the fol lowin g maintena nce pr ocedur es be per formed o n a regul ar ba sis. Cleaning the document glass and the a utomatic document feeder If the doc ument g lass, do cumen t cover or automa tic do cumen t scanni ng uni t have di[...]

6-3 6 TROUBLESHOOTING Check the foll owing tr oubleshoo ting l ist before r equesti ng serv ice as m any p roblems can be fi xed by th e user. If you are una ble to so lve th e proble m by chec king the list, tur n off t he main po wer sw itch and the powe r switc h, and unpl ug the power cord. Probl ems relate d to the copy function a re desc ribe[...]

[...]

7-1 CHAPTER 7 DOCUMENT FILING FUNCTION Page OVERVIEW ............... ................. ...................... ................. ................. ..... 7-2 ● Document filing funct ion ...................... ............................ ................ 7-2 TO USE THE DOCUMENT FILING FUNCTION..................... ................ 7-4 ● A look at[...]

7-2 OVERVIEW Document filing function The doc ument filing fu nction allows you to sav e a docum ent im age in the ma chin e's hard disk as a dat a file . The image can be c alled up and p rinted o r trans mitted as nee ded. The scanned document i mage is saved when printing or transmitting a do cument i n copy mo de, pri nter mode , or image [...]

OVERV IEW 7-3 7 ■ ■ ■ ■ Quick File folder When [ QUICK FI LE FOL DER] is select ed in th e main scree n of any of the mod es, the file i s save d in thi s folder. Up to 1 000 files can be save d in the Qu ick Fil e fold er. All file s in the Quic k File F olde r can b e del eted usin g a k ey operator p rogram. If you have a f ile th at you[...]

7-4 TO USE THE DOCUMENT FILING FUNCTI ON A look at the operation pane l Touch panel (see the next page) This dis p lays m essages and keys. Key s can be touched to se lect a nd enter s etting s. When a k ey is t ouched, a b eep wil l sound a nd the key wi ll be h ighli ghted to indic ate tha t it is selecte d. When a key can not be select ed in a s[...]

TO USE THE DOCUMENT FILING FUNCTION 7-5 7 Main screen of document filing To disp lay th e main screen of docu ment fi ling, p ress the [DOCUMENT F ILING] key when the touch pane l shows th e copy m ode s creen, imag e sen d mode, or the job statu s scre en. The mai n screen s hows m essages , keys , and i tems that ca n be sele cted fo r docum ent [...]

7-6 SAVING A DOCUMENT IMAGE FILE Quick File When pri nting or trans mitting a do cumen t in copy mod e, printer mode, or fax /image tra nsmissio n mode,"Q UICK FILE" c an be se lected to save an ima ge of the docum ent to th e Quick F ile folder. The image can be c alled up at a later tim e, allo wing yo u to print or transmit the docum e[...]

SAVING A DOCUMENT IMA GE FILE 7-7 7 Filing When pr inting or tra nsmittin g a doc ument in copy mode, printer mode , or ima ge sen d mode ,"FILE" can be s elected to save an im age of the docum ent to the ma in fol der or a previ ously created cust om fol der. Th e image c an be called up at a lat er tim e, allowi ng you to p rint or tran[...]

SAVING A DOCUMENT IMAGE FILE 7-8 9 Touch the [OK] key. The tou ched f older is selected and y ou retur n to the s creen o f step 5. The se lecte d folder name is dis playe d. 10 If needed, select the [CONFIDENTIAL] checkbox (only in copy mode). When thi s is sele cted, th e file is stor ed wit h the attri bute [CONFI DENTIAL]. To ca ll up the file,[...]

SAVING A DOCUMENT IMA GE FILE 7-9 7 Print jobs This fu nction c an only be used if the machine has th e printer function. Pr int jo bs sent to the mac hine usin g the machin e's print er driv er can be s aved in the main folder or a pr eviousl y create d cust om folder whe n printed. T he sa ved prin t data ca n be called up and printed o r tr[...]

SAVING A DOCUMENT IMAGE FILE 7-10 Scan Save Scan save is used to save a scanned document image in the main folder or the custom folder without copying or transmitti ng it. 1 Press the [DOCUMENT FILING] key on the operation pan el. 2 Touch the [SCAN TO HDD] key. 3 Touch the [SPECIAL MODES] key. Sel ect a ny sp ecia l functio ns th at yo u wish to us[...]

SAVING A DOCUMENT IMA GE FILE 7-11 7 11 Touch the [RESOLUTION] key. 12 Touch the key of the desired resolut ion. Select one of four reso lution lev els as app ropria te for the o riginal. The se lecte d resol ution key is high light ed. 13 Touch the [OK] key. You will return to the screen o f step 5. 14 Touch the [EXPOSURE] key. 15 Select [AUTO] or[...]

SAVING A DOCUMENT IMAGE FILE 7-12 ■ ■ ■ ■ Using special func tions for scan sa ve. Touc h the [SPE CIAL M ODES] k ey in the main s can sav e scre en to di spla y the spe cial mod es sc reen. The fu nction s below c an be selected in thi s scr een. [ERASE] key (see page 5 -4) Use this function to erase shadow s that ca n appear around the ed[...]

7-13 7 CALLING UP AND USING A FILE Searching for and calling up a saved file When cal ling up a file, you can e nter t he file na me, fol der name, or user name t o quick ly sear ch for th e file . To searc h for a fil e, touch the [SEARCH] key in the m ain scr een of do cumen t filing m ode or in a screen that sh ows folders or files i n a folder [...]

CALLING UP AND USING A FILE 7-14 7 The results of t he user name search appear. Touch the desired file name or fold er na me. ● See page 7- 5 for a lis t of the docume nt fili ng icons. ● When a fil e name is to uched, the oper ation selecti on scree n appea rs. (To pe rform an operation us ing the file, go to step 5 on page 7-16 .) ● When a [...]

CALLING UP AND US ING A FILE 7-15 7 Calling up and using a saved fi le A file s aved with the doc ument f iling fun ction ca n be call ed up a nd printe d or m anipulat ed as n eeded. The foll owing oper ation s can be perfo rmed: ● [Pri nt] : Prin t the file ( page 7 -16). ● [Send] : Transmit t he saved fil e (page 7 -17). The file can be tran[...]

CALLING UP AND USING A FILE 7-16 5 Touch the key of the operation that you wish to perform. (1) [PRINT] key (see bel ow) (2) [SEND] key (see page 7- 17) (3) [PROPERTY CHANGE] key (see page 7 -18) (4) [MOVE ] key (see page 7 -19) (5) [DELET E] key (see pa ge 7- 19) (6) [DET AIL ] ke y (see p age 7- 19) The set ting s creen o f the s elect ed oper at[...]

CALLING UP AND US ING A FILE 7-17 7 ■ ■ ■ ■ [Send] A saved file c an be tra nsmitted b y Scan to E-mai l, Scan t o FTP, fax , or Interne t fax. Thes e transm issi on met hods req uire ins talla tion o f the app ropria te optio ns. The fol lowing s creen app ears whe n the [SEND] k ey is tou ched. Sel ect the destinati on and other settings [...]

CALLING UP AND USING A FILE 7-18 [SEND SET TING S] key [SE ND SET TING S] key is dis playe d in E- mail /FTP mode an d Inter net FAX mod e. Touc h this ke y to set the su bject and file nam e. In E-mail/ FTP mo de, se nder name can a lso be set. [SUB ADDRESS] key or [ADDRESS ENTRY ] key ● Touch this k ey to direct ly ente r the desti nation for a[...]

CALLING UP AND US ING A FILE 7-19 7 ■ ■ ■ ■ [Move] This operati on is used to move a fil e to a differe nt fol der. The fo llowing s creen a ppears wh en the [ MOVE] key is se lected. Only [SHARING] a nd [CONFIDE NTIAL] files can be m oved. A [P ROTECT] fi le ca n be mo ved by fi rst using [PROPERTY CHANGE] to chan ge the attrib ute to [SHA[...]

CALLING UP AND USING A FILE 7-20 ■ ■ ■ ■ Calling up and ma nipulating a file fro m the job status s creen File s saved usin g the "FI LE" an d "QUICK FILE" f unctio ns appear as key s in the finis hed jo b status screen. You ca n vie w informa tion on a file that ap pears i n this sc reen an d manip ulate t he file. 1 Pr[...]

7-21 7 CUSTOM SETTINGS Creating, editi ng, and deletin g user names and folders This se ction expl ains how to crea te, edit, an d delete us er names and custo m folders for saving files with the document filing f uncti on. Use r names and custom f older s are c reated and ed ited a t the o peration panel of the machine or in the Web pa ge. ■ ■[...]

CUSTOM SETTINGS 7-22 ■ ■ ■ ■ Programming a us er name To progr am a user name , follow steps 1 and 2 on page 7-21, touch the [USER NA ME REGIST RATION] ke y in step 3, and the n follow the se steps : 1 Touch the [USER NAM E] key. The lowes t numb er that has not yet bee n programm ed appea rs autom aticall y in "No.". Touch th e n[...]

CUSTOM SETTINGS 7-23 7 ■ ■ ■ ■ Editing and deletin g a user name To edi t or del ete a user name, follow st eps 1 a nd 2 on pag e 7-2 1 and th en follow t hese step s: 1 Touch the [AMEND/DELETE USER NAME ] key. 2 Touch the [USER NAME] key that you wish to edit or delete. A pass word entr y screen will appear. 3 Enter the 5-digit password wi[...]

CUSTOM SETTINGS 7-24 ■ ■ ■ ■ Creating a custom folder Up to 500 cus tom fo lder s can b e cr eated. When no furthe r folder s can be crea ted, de lete u nneede d fold ers (p age 7-25) an d then crea te a ne w folder. A pas sword can be om itted wh en crea ting a folder. To cre ate a cus tom fo lder, follow steps 1 and 2 on page 7 -21, touch[...]

CUSTOM SETTINGS 7-25 7 9 Touch the [OK] key. 10 To exit, touch the [EXIT] key. To cr eate another folder, tou ch the [NEXT] key. If you to uched the [EXIT] key, you will return to the screen of step 3 on page 7-21. If you touche d the [NEXT] key, a new folder screen wi ll appear. Repeat steps 1 to 10 to create a new fol der. ■ ■ ■ ■ Editing[...]

7-26 ENTERING CHARACTERS To enter or edi t characte rs in setting s creens such as auto dial k ey progra mming screens, foll ow the step s below. Characte rs that can be ente red are alphab etical char acters, s pecial charac ters, num bers, an d symbol s. ■ ■ ■ ■ Entering alphabeti cal characters (Example : Shar p äÄ ) 1 Touch the [S] ke[...]

ENTERING CHARACTERS 7-27 7 ■ ■ ■ ■ Entering numbers and symbols 1 Touch the [AB/ab 12#$%] key. When th e cha racters "12 #$%" a re high lighted, numbe r/symb ol entry mode is selec ted. 2 Enter the desired number or symbol. Numb ers and symbo ls that can be ente red ar e as follows : Screen 1/2 Screen 2/2 * Change screens by touch[...]

7-28 TROUBLESHOOTING This sec tion e xplains pr oble ms frequ ently encou ntere d when u sing the document filin g function . If yo u exper ience any diffic ulty, refer to the fol lowing table. For in formation on genera l machine pr oblems, pr inter pro blems, fax problem s, and network sc anner pr oblem s, pleas e see the t roubl eshootin g secti[...]

8-1 CHAPTER 8 SPECIFICATIONS This chap ter cont ains u seful in forma tion ab out the m achine. Page SPECIFICATIONS .... ................. ............................ ............................ ..... 8-2 INDEX ................. ................. ................. ............................ ...................... 8-4[...]

8-2 SPECIFICATIONS Automatic document feede r Type Consol e Print s ystem Electropho togra phic sy stem Exposur e sy stem OPC Develope r system Dry-type t wo-co mponen t magne tic brush developm ent Paper fe ed syste m 4 tray s and bypass tr ay Fusing sy stem Heat er roll er Resoluti on Scan: 600 x 600 dpi, ou tput: 60 0 x 600 dpi Gradation 256 lev[...]

SPECIFICATIO NS 8-3 8 * Noise e missio n when p eripher al devices are install ed Continuo us co pying s peed (w hen the off set fun ction is not us ed) AR-M5 50U/AR-M5 50N AR-M6 20U/AR-M620N A R-M700U/A R-M700N Copy pa per size 100% / Reduc ed / En larged 11" x 17" (A3) 30 copi es/min. 34 c opies/min . 39 copies/mi n. 8-1/2" x 14&qu[...]

8-4 INDEX [ ] key ........ ................... ............. ............. ........... 1-12 [#/P] key ....... ............. ............ ............. ............. ..... 1 -12 ■ ■ ■ ■ Numerics 1-sided c opy . ............. ............ ............. ........... 4-7, 4 -11 1-sided c opy-Aut omatic do cument feeder . ............. 4-7 1-side[...]

INDEX 8-5 8 Example s of cov ers and inserts ............... 5-16 to 5-21 -Covers ............ ............. ............. ............ 5-17 to 5-20 -Inserts ...... ............. ................... ............. ........... 5-21 ■ ■ ■ ■ F Facsimile expans ion kit ... ............. ............. ........... 1-11 Fax data rec eival/fo rward [...]

INDEX 8-6 ■ ■ ■ ■ P Pamphlet copy ...................... ............. ...... 1-4, 5- 2, 5-6 Paper cur led . ............. ............ ............. ............. ..... 2 -27 Paper tray settings .......... ................... ......... 2-1 0, 2-15 Part names -Exterio r..... ............. ............ .................... ............. 1- 9[...]

INDEX 8-7 8 Troubles hootin g -Copier ope ration ...................... ............. ............. 6-3 -Document fi ling f unction ........... ............. ........... 7-28 -Finisher /saddle stit ch fin isher ......... ............. ..... 3 -13 -General informat ion ....................... ...... 2-26 to 2 -28 -Inserter ........... ............. [...]

[...]

NOTICE BE SURE TO ASK YOUR AUTHORIZED SHARP DEALER ABOUT THE WAR-RANTY THAT YOUR SELLING DEALER EXTEN DS TO YOU. In order to assure you, the end-user , of warranty protection , Sharp extends a limited war r anty to each of its authorized dealers an d, in turn, requires each of its aut horized deal ers to extend its own warranty to y ou on terms tha[...]

OPERATION MANUAL (for general information and copier operation) PRINTED IN JAPAN 2004B DSC1 CINSE2473FC52 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-1163. www.sharpusa.com SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario, L4Z 1W9[...]