Sharp MX-M464N инструкция обслуживания

CONTENTS Keep this manual close at hand for reference whenever needed. QUICK ST ART GUIDE DIGIT AL MUL TIFUNCTIONAL SYSTEM MX-M364N/MX-M464N/MX-M564N CAUTIONS __________________________________________ 3 P ART NAMES _______________________________________ 7 TURNING THE POWER ON AND OFF ____________________ 8 OPERA TION MANUALS AND HOW TO USE THEM _[...]

2 For the users of the fax function � F AX interface cable and Line cable: These special accessories must be used with the device. The declaration of conformity may be consulted at: http://www .sharp.de/doc/MX-FX1 1.pdf SOFTW ARE LICENCE The SOFTW ARE LICENCE will appear when you install the software from the CD-ROM. By using all or any portion o[...]

3 CAUTIONS T o ensure safe use of the machine, this manual uses various safety symbols. The safety symbols are classied as explained below . Be sure you understand the meaning of the symbolswhen reading the manual. W ARNING Indicates a risk of death or serious injury . CAUTION Indicates a risk of h[...]

4 Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine. Risk of injury due to the machine falling or toppling. Ifperipheraldevicesaretobeinstalled,donotinstallonanunevenoor ,slantedsurface,orotherwise unsta[...]

5 Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine. Iftheliquidspillsortheobjectfallsintothemachine,reorelectricalshock may result. Do not remove the machine casing. High-voltage parts inside the machine may cause electrical shock. Do not make[...]

6 SUPPLIES Standard supplies for this product that can replaced by the user include paper , toner cartridges, and staplecartridgesforthenisher . BesuretouseonlySHARP-speciedproductsforthetonercartridges,nisherstaplecartridge,and transparencylm. The supply of spare parts for rep[...]

7 P ART NAMES Main power switch T ray 1 T ray 2 (when paper feed tray is installed)* T ray 3 (when paper feed tray is installed)* T ray 4 (when paper feed tray is installed)* Bypass tray Front cover Output tray (Centre tray) Automatic document feeder USB connector (A type) Exit tray unit (right tray)* [POWER] key ( ) IMAGE SEND mode indicators ( ) [...]

8 TURNING THE POWER ON AND OFF This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key ( ) on the operation panel. T urning on the power (1) Switch the main power switch to the “ ” position. (2) Press the [POWER] key ( ) to turn on the power . T [...]

9 OPERA TION MANUALS AND HOW T O USE THEM The instructions for this manual are separated in the following three sections. Before using the machine Start Guide: this manual This section explains precautions to ensure safe usage, part names and how to switch on/off the power . This section also includes important information for persons that are resp[...]

10 SPECIFICA TIONS Basic Specications / Copier specications Name MX-M364N/MX-M464N/MX-M564N T ype Desktop Colour Monochrome Copier system Laser electrostatic copier Scanning resolution Scan (Document glass): 600 × 600 dpi, 600 × 400 dpi, 600 × 300 dpi Scan (Document Feeder): 600 × 600 dpi, 600 × 400 dpi Print: 600 × 600 dpi, equivalent [...]

11 Required power supply Supplied from this machine Weight Approx. 12 kg (26.5 lbs.) Dimensions When output paper tray is stored 428 mm (W) × 593 mm (D) × 198mm (H) (16-55/64" (W) × 23-1 1/32" (D) × 7-51/64" (H)) When output paper tray is extended 612 mm (W) × 593 mm (D) × 198 mm (H) (24-3/32" (W) × 23-1 1/32" (D) ×[...]

12 Name Saddle Stitch Finisher (MX-FN10) Paper sizes Dependsonfeederspecications Useable paper Paper weight 55 g/m 2 (13 lbs.) to 300 g/m 2 (1 10 lbs. Cover) No. of trays 2 (Upper tray / Lower tray) T ray capacity (80 g/m 2 (21 lbs.)) Upper tray Non-stapled A3 wide (12" × 18") / A3 (1 1" × 17") / B4 (8-1/2" ×[...]

13 Name Facsimile expansion kit (MX-FX1 1) Useable lines General phone lines (PSTN), automated branch exchange (PBX) Connection speed Super G3: 33.6 kbps, G3: 14.4 kbps Coding method MH, MR, MMR, JBIG Connection mode Super G3 / G3 Original paper sizes for transmission A3 (1 1" × 17") to A5 (5-1/2" × 8-1/2") (Paper with a max. [...]

14 T O THE ADMINISTRA TOR OF THE MACHINE System settings password A password is necessary to change the machine’s system settings using administrator authority . System settings can be changed from either the operation panel or using a computer web browser . After setting up the machine, refer to [SYSTEM SETTINGS] in the Operation Guide to set a [...]

INFORMA TION ON DISPOSAL 15 Information on Disposal for Users (private households) � In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and[...]

MX-M364N/MX-M464N/MX-M564N QUICK ST ART GUIDE PRINTED IN FRANCE TINSE5226GHZZ[...]