Sharp TU-37GAX инструкция обслуживания

LCD COLOUR TELEVISION OPERA TION MANU AL 32 o DISPLA Y A VC SYSTEM LC-32G2X/ TU-32GAX 37 o DISPLAY AVC SYSTEM LC-37G2X/ TU-37GAX Printed in Japan TINS-B308WJZZ 04P06-JKG IMPOR T ANT NO TICE: This warranty applies only to products sold in A ustralia & New Zealand WARRANTY Consumer Electronic Pr oducts Congr atulations on Y our Purchase! This Sha[...]

1 LCD COLOUR TELEVISION OPERA TION MANU AL Contents …………………………………………………… 1 Dear SHARP customer …………………………………… 3 Important Safety Precautions ………………………… 3 Supplied accessories …………………………………… 5 Preparation …………………………[...]

2 Contents Manufactured under license from BBE Sound, Inc. Licensed by BBE Sound, Inc. under USP4638258, 5510752 and 5736897. BBE and BBE symbol are registered trademarks of BBE Sound, Inc. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Using external eq[...]

3 Impor tant Safety Precautions Electricity is used to perfor m many useful functions, but it can also cause personal injuries and pr operty damage if improperly handled. This pr oduct has been engineered and manufactured with the highest priority on safety . However , improper use can result in electric shock and/or fir e. In order to prevent pote[...]

4 Important Safety Precautions • Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, r esulting in serious perso[...]

5 Supplied accessories Make sure the following accessories ar e provided with the product. A VC System: TU-32GAX/TU-37GAX Remote control unit ( g 1) Page 14 “AAA” size battery ( g 2) Page 14 System cable ( g 1) Page 9 Stand unit (for A VC System) ( g 1) Stand ( g 1) Stand cushion ( g 4) Stand spacer ( g 4) Stand screw ( g 2) Page 11 Antenna cab[...]

6 Supplied accessories Make sure the following accessories ar e provided with the product. Cable clamp ( g 1) Page 10 Page 9 AC cord ( g 1) Bracket unit ( g 1) Page 7 Left speaker Page 7 Speaker unit ( g 1) Right speaker Page 7 Display: LC-32G2X Cable clamp ( g 1) Page 10 Page 9 AC cord ( g 1) • Speakers are attached when shipping LC-32G2X. Displ[...]

7 Attaching speaker s Preparation 1 2 3 6 5 4 7 8 Peel off the tape holding the ends of the cables, and move cables towards behind the display . T ur n the speaker to the fr ont of the Display (direction of the arr ow) and fit it to the screw hole. Fasten the screws. Hook the W hole of the speaker to the screw of the Display . Fasten the speaker ca[...]

8 Where to place the System “System” means the Display and A VC System. First select the location where to place the System. 1 2 Selecting the location of the System • Select a place with no direct sunlight and good ventilation. • The Display and the A VC System ar e connected by the system cable. (See page 9 for details.) Setting the Syste[...]

9 System cable A VC System (rear view) AC cord Display (rear vie w) AC cord System cable (GREY) Connect the plug firmly until the hooks on both sides click. (WHITE) Connect the plug into the terminal and secure it by tightening the thumb screws. Setting the System After putting the Display and the A VC System in place, connect the system cables and[...]

10 Preparation 4 5 Attaching the c lamp and b undling the cables with the c lamp Closing the terminal cover Cable c lamp Insert the cable clamp in the hole on the Display as shown. Display (rear vie w) Cables come out fr om the small opening. LC-32/37G2X-a 04.5.22, 11:49 AM 10[...]

11 Preparation Setting the A VC System with the stand 1 How to install the A VC System vertically using the stand unit. • Use the supplied stand unit for installing the A VC System ver tically in an upright position. Stick eac h spacer to the stand as shown. Peel each spacer away from the paper and attach to the four bulging areas on the stand. 2[...]

12 Removing speaker s Preparation 1 2 3 5 4 LC-32G2X NO TE • Perfor m the same steps for right speaker . • T o attach the speakers, perform the steps in reverse order . Unfasten the screw used to secur e the speaker bracket. T ake off the speaker cable cover . T ake off the speaker terminal cover . Unfasten the screws. Disconnect the cable from[...]

13 Preparation Removing the stand Before detaching (or attaching) stand, unplug the AC cor d from the AC input and the system cable from the Display . CA UTION • Do not remove the stand fr om the Display unless using an optional wall mount brac ket to mount it. Before attac hing/detaching stand • Before performing work make sure to turn off the[...]

14 1 Open the battery cover . 2 Insert two supplied “AA A” size batteries. • Place batteries with their ter minals corresponding to the ( e ) and ( f ) indications in the battery compar tment. 3 Close the battery cover . CA UTION Improper use of batteries can r esult in chemical leakage or explosion. Be sure to follow the instructions below .[...]

15 Preparation Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable) Simple operations for watching a TV programme Basic connection Connecting to an antenna T o enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable. Connecting to the power out[...]

16 P ar t names POWER indicator MAIN POWER button OPC sensor* Displa y POWER button TV/VIDEO button VOLUME buttons (VOL l / k ) CHANNEL buttons (CH s / r ) Remote control sensor *OPC: Optical Picture Contr ol (See page 30.) LC-32/37G2X-a 04.5.22, 11:49 AM 16[...]

17 * Press RESET if the system cannot r etur n to its original state after perfor ming various operations. This will reset the System as shown below . • A V MODE r esets to USER. • TV channel resets to channel 1. • Dual screen r esets to nor mal. • Audio setting initialises. • Dolby Virtual resets to Of f. • Image position is initialise[...]

18 P art names 12 7 9 10 8 3 4 5 12 19 15 16 17 18 20 21 22 13 11 23 24 14 26 27 25 6 NO TE • When using the r emote control unit, point it at the Display . Remote contr ol unit 1 PO WER (ST ANDBY/ON) T o switch the power on and off. (See page 19.) 2 OPC T o switch the Optical Picture Control on and off. (See page 30.) 3 P&P Set the dual pict[...]

19 Display A VC System T urning on the power Make sure that the system cable is connected befor e tur ning on the power . POWER indicator PO WER button MAIN PO WER button POWER indicator PO WER button 1 2 T urning off the power Press PO WER on the r emote control unit. • The System enters standby mode and the image on the screen disappears. • B[...]

20 W atching TV Simple b utton operations f or changing c hannels Y ou can change channels in several ways. Using CH r / s on the remote contr ol unit • Press CH r to incr ease channel number . • Press CH s to decrease channel number . NO TE • CH s / r on the Display operates the same as CH s / r on the remote contr ol unit. Channel display M[...]

21 W atching TV Using MPX on the remote contr ol unit In the NICAM TV broadcasts When receiving a stereo signal Each time you press MPX , the mode switches between NICAM STEREO and MONO. In the TV mode of A2 TV broadcasts When receiving a stereo signal Each time you press MPX , the mode switches between STEREO and MONO. Stereo mode Bilingual mode M[...]

22 W atching TV Simple b utton operation f or changing v olume/sound Changing the v olume Y ou can change the volume on the Display or on the remote contr ol unit. NO TE • “TV”, “INPUT1”, “INPUT2”, “INPUT3”, “INPUT4”, “INPUT5” and “CARD” modes can each store volume adjustment values separately . A udio status When “A[...]

23 Basic adjustment settings Menu operation b uttons Use the following buttons on the remote contr ol to operate the menu. On-Screen Displa y Example MENU: Press to open or close the menu screen. a / b / c / d : Press to select a desir ed item on the screen or adjust a selected item. ENTER: Press to go to the next step or complete the setting. RETU[...]

24 Basic adjustment settings TV/A V input mode menu items List of TV/A V men u items to help y ou with operations OPC ................................................ P age 30 Backlight ........................................ P age 31 Contrast ......................................... P age 31 Brightness ..................................... P ag [...]

25 Basic adjustment settings A uto installation Y ou can run auto installation again, even after setting up the preset channels. Press MENU and the MENU screen displays. 1 2 5 3 – – – – Press c / d to select “Setup”. MENU [ Setup ... Auto Installation ] Setup Option Child Lock Speaker Setup Auto Installation Programme Setup Position [En[...]

26 Basic adjustment settings Press a / b to select “Manual Adjust”, and then press ENTER . 4 Next 01 SAT.1 02 PR07 03 KABEL Programme Setup “Manual Adjust” menu Press MENU and the MENU screen displays. Press c / d to select “Setup”. 1 2 3 5 Press c / d to select “Y es”, and then press ENTER . Y ou can select one of the following set[...]

27 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. 1 2 Press a / b to select the optimum colour system, and then press ENTER . MENU [ Setup ... Programme Setup ... Manual Adjust ] Fine Colour sys. Sound sys. Label Skip Lock [179.25] Search [...]

28 Basic adjustment settings 3 Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. Press a / b to select “Skip”, and then pr ess ENTER . • Skip menu displays. 1 2 MENU [ Setup ... Programme Setup ... Manual Adjust ] Fine Search Colour sys. Sound sys. Label Skip Lock[...]

29 Basic adjustment settings Sort menus Sort Channel positions can be sorted freely . 01 06 SAT.1 KABEL 01 SAT.1 02 03 04 05 Next 01 SAT.1 02 KABEL Next 01 SAT.1 KABEL 02 01 KABEL Next 01 KABEL SAT.1 02 Press MENU and the MENU screen displays. Press c / d to select “Setup”. 1 2 3 Press a / b to select “Sort”, and then press ENTER . 4 6 7 Pr[...]

30 Basic adjustment settings Language setting f or on-screen displa y Y ou can also select a language from setup menu. Select from among 3 languages: English, Chinese and Arabic. 3 Press MENU and the MENU screen displays. 1 2 4 Press c / d to select “Setup”. Press a / b to select “Language”, and then press ENTER . Press a / b to select the [...]

31 Basic adjustment settings Picture adjustments Adjust the picture to your pr eference with the following picture settings. Press MENU and the MENU screen displays. 1 2 3 4 Press a / b to select a specific adjustment item. Press c / d to adjust the item to your desired position. Press c / d to select “Pictur e”. NO TE • For resetting all adj[...]

32 Basic adjustment settings C.M.S. (Colour Management System) Colour tone is managed using the six-colour adjustment setting. Press MENU and the MENU screen displays. 1 2 Press c / d to select “Pictur e”. 3 Press a / b to select “Advanced”, and then press ENTER . 4 Press a / b to select “C.M.S.-Hue”, and then press ENTER . 5 Press a / [...]

33 Monochr ome For viewing a video in monochrome. Press a / b to select “Monochr ome”, and then press ENTER . Press c / d to select “On”, and then press ENTER . Repeat steps 1 to 3 in 3D-Y/C . 1 2 3 Basic adjustment settings 3D-Y/C Provides high quality images with minimal dot crawl and cross colour noise. Description Normal adjustment For [...]

34 A udio adjustment Y ou can adjust the sound quality to your prefer ence with the following settings. Press c / d to select “Audio”. Press a / b to select a specific adjustment item. Press c / d to adjust the item to your desired position. Basic adjustment settings 2 3 4 c button For weaker treble For weaker bass Decrease audio fr om the righ[...]

35 Basic adjustment settings No Signal off When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes. Press a / b to select “No Signal Off”, and then press ENTER . Press c / d to select “Enable”, and then press ENTER 3 4 • Five minutes befor e the power shuts down, remaining time displays every mi[...]

36 Impor tant notes on using memory car ds • Sharp cannot be held r esponsible for misuse of the LCD TV set, any troubles during use, or other pr oblems, or any damages arising out of the use of the LCD TV set, except for those cases for which Sharp is liable by law . • If you or other people misuse the LCD TV set, or the LCD TV set is af fecte[...]

37 Using memory card Y ou can use memory cards (commercially available) for recor ding and playing back pictures. • Please use an appr opriate PC card adapter (commercially available) for each memory car d. • Following memory cards ar e available. (Note that names for memory cards vary depending on manufacturers.) * Each memory card name is a t[...]

38 Using memory card Car d Setup mode men u items Card Still Setup Slide Show Setup Edit Video Setup Format Audio Select My Programme Rec. Mode Repeat Pre-r ecording Y es/No Edit Interval Repeat Order Setup/Erase Off/TV/INPUT1-INPUT5 Protect/Delete File/ Delete All SP/LP/EP On/Off Off/File/All Protect/Delete File/Delete All 1-10/15/20/25/30/ 45/60 [...]

39 Using memory card Recording a still ima ge Y ou can recor d a still image on the car d. Press E REC . 1 2 Press FREEZE . 3 Press ENTER to update the still image. Onion Tomato Potato x 1 x 1 x 1 Still Cooking Time Onion Tomato Potato x 1 x 1 x 1 Cooking Time Still Still image was captured on a card. Cooking Time Still • “Still image was captu[...]

40 Using memory card Setting Slide Show Y ou can adjust the interval, order and r epeat settings. 5 6 Press a / b to select “Slide Show Setup” and then press ENTER . Press MENU and the MENU screen displays. 2 3 Press c / d to select “Car d”. 4 Press a / b to select “Still Setup”, and then press ENTER . Slide Show Setup My Programme Audi[...]

41 Using memory card A udio Select Y ou can enjoy the audio from TV or other external equipment during the still image playback. 2 3 Press a / b to select “Audio Select”, and then press ENTER . Audio Select Off Input5 Input1 Input3 TV Input2 Input4 Slide Show Setup My Programme Edit Protecting/unpr otecting still image files Y ou can protect an[...]

42 Using memory card Deleting all still image files 2 Press c / d to select “Y es”, and then press ENTER . Deleting a still image file 5 6 Press a / b to select “Edit”, and then press ENTER . Press MENU and the MENU screen displays. 2 3 Press c / d to select “Car d”. 4 Press a / b to select “Still Setup”, and then press ENTER . Pres[...]

43 Using memory card Recording a motion picture Use this setting to recor d images you are currently watching. Record with the settings made in “Rec. Mode” and “Pre-r ecording”. Press E REC to start recor ding. • CARD indicator lights up red. • Recor ding information displays in the lower right corner of the screen. 1 2 Press E REC to s[...]

44 Using memory card Protecting/unpr otecting motion picture files Y ou can protect any file you do not want to delete. 2 3 Press a / b to select “Edit”, and then press ENTER . Rec. Mode Protect Delete File Delete All Pre-recording Repeat Edit Press a / b to select “Protect”, and then press ENTER . 4 Repeat steps 1 to 4 in Pre-recor ding . [...]

45 Using memory card Deleting all motion picture files 6 Press a / b to select “Delete All”, and then press ENTER . 7 Deleting a motion picture file 5 6 Press a / b to select “Edit”, and then press ENTER . Press MENU and the MENU screen displays. 2 3 Press c / d to select “Car d”. 4 Press a / b to select “Video Setup”, and then pres[...]

46 Using e xternal equipment CA UTION • T o protect all equipment, always turn off the A VC System before connecting to an HDTV tuner , VCR, DVD player , PC, game console, camcorder or other external equipment. NO TE • See pages 47 to 49 for external equipment connection. • Please refer to the r elevant operation manual (DVD player , PC, etc.[...]

47 Using external equipment A VC System (rear view) HDTV tuner A V cable (commercially available) Connecting an HDTV tuner Y ou can use the INPUT 1 terminal when connecting an HDTV tuner and other audiovisual equipment. A VC System (rear view) VCR A V cable (commercially available) Connecting a VCR Y ou can use the INPUT 2 terminal when connecting [...]

48 Using external equipment A VC System (rear view) D VD player Component cable (commercially available) A V cable (commercially available) Connecting a D VD player Y ou can use the INPUT 3 terminal when connecting to a DVD player and other audiovisual equipment. A VC System (front view) Game console/Camcorder Composite video cable (commercially av[...]

49 Using external equipment NO TE • Macintosh adaptor may be requir ed for use for some Macintosh computers. • When connecting to a PC, the correct input signal type is automatically detected. (See page 57.) If the PC image does not come in clearly , you may need to set the Auto Sync. adjustment in the “Setup” menu. (See page 51.) Connectin[...]

50 Rear view Using external equipment Connecting external speaker s CA UTION • Make sure external speakers have 4 ohm and 10 watt specifications. • Connect the plus/minus terminals with the correct cables. Incorrect connection may cause a short. How to connect the speaker cable Push down the tab . Inser t the end of the cable . 1 1 1 1 1 2 2 2 [...]

51 Useful adjustment settings 1 2 Image position (f or T V/A V input mode) For adjusting a picture’ s horizontal and vertical position. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Description Centres the image by moving it to the left or right. Centres the image by moving it up or down. Selected item H-P os. V -Pos[...]

52 Useful adjustment settings Fine Sync. adjustment (PC input mode only) Ordinarily you can easily adjust the pictur e as necessary to change image position using Auto Sync. In some cases, however , manual adjustment is needed to optimise the image. 1 2 Press MENU and the MENU screen displays. Press c / d to select “Setup”. 4 3 Press a / b to s[...]

53 Useful adjustment settings Input Label Y ou can assign each input source a label you like. Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Input Label”, and then press ENTER . 6 Repeat the above until the name is fully spelt out, and then press ENTER . • The name can be 6 characters or les[...]

54 Useful adjustment settings A V mode selection A V mode gives you five viewing options to choose from to best match the system environment, which can vary due to factors like room-brightness, type of pr ogramme watched or the type of image input fr om external equipment. Press A V MODE again before the mode displayed on the screen disappears. •[...]

55 Useful adjustment settings 4:3 Mode set to “Normal” 4:3 Mode set to “Panorama” Normal Zoom 14:9 P anorama Full Cinema 16:9 Cinema 14:9 Selected item Normal Zoom 14:9 P anorama Full Cinema 16:9 Cinema 14:9 Description For 4:3 “standard” pictur es. A side bar appears on each side. For 14:9 letterbox pictures. A thin side bar appears on[...]

56 Useful adjustment settings WIDE MODE Normal Cinema Full Dot by Dot Input signal (640 m 480) Input signal (1024 m 768) WIDE mode (f or PC input mode) Y ou can select the screen size. a Press WIDE . • The WIDE MODE menu displays. 1 2 Press WIDE or a / b to select a desired item on the menu. WIDE MODE Cinema Full Dot by Dot Input Signal Normal Do[...]

57 3 4 Useful adjustment settings Input signal (PC input mode onl y) • Some input signals may have to be register ed manually to display properly . • The pairs of input signals (r esolutions) in the list below are not distinguishable when r eceived. In such case, you have to set the correct signal manually . After setting once, it will display [...]

58 Useful adjustment settings Rotate Y ou can set the orientation of the picture. Press MENU and the MENU screen displays. 1 2 Press c / d to select “Setup”. Press a / b to select “Rotate”, and then pr ess ENTER . 3 [Normal]: nor mal image. [Mirror]: mirr or image. ABC ABC 4 Press a / b to select the desired mode, and then press ENTER . Nor[...]

59 Useful adjustment settings A udio out Allows you to select what contr ols the audio output. NO TE • This setting is available only in TV input mode. Press MENU and the MENU screen displays. 1 2 Press a / b to select “Audio Out”, and then press ENTER . 3 Press c / d to select “Fixed” or “V ariable”, and then press ENTER . 4 Descript[...]

60 P assw ord setting f or child loc k (for TV input mode) Allows you to use a password to pr otect cer tain settings from being accidentally changed. Setting a passw ord (Changing a pass wor d) Register a 4-digit password number to use the Child Lock function. Press MENU and the MENU screen displays. 1 2 3 Press a / b to select “Child Lock”, a[...]

61 Useful adjustment settings Centre Channel Input Y ou can use the speaker as the centre speaker when using a 5.1ch surr ound system. 4 Press c / d to select “On” , and then press ENTER . • Only the sound from the Centr e Channel Input terminal is output from the speaker . Press MENU and the MENU screen displays. 1 2 Press c / d to select ?[...]

62 Useful features Dual screen functions Allows you to display two pictures on the scr een at one time. Dual screen Y ou can display two pictures except when inputting from a INPUT 5 terminal and card. Press P&P . • Dual scr een displays and a selected input source image displays. 2 3 NO TE • This function does not work under the following [...]

63 T eletext language setting If T eletext infor mation does not display corr ectly , perfor m the setting procedur e below . Select from among 4 kinds of language tables: W est Europe, East Eur ope, Greek/T urkish, Cyrillic. Each table is compatible with the T eletext languages listed below . 1 2 Press MENU and the TV MENU screen displays. Press c[...]

64 Useful features T eletext function What is T eletext? T eletext broadcasts pages of information and entertainment to specially equipped television sets. Y our System receives T eletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports infor mation, stock exchange prices and programme [...]

65 Useful features T OP Over view screen BLOCK PAGES TV PROGRAMS COLOR BAR WEATHER NEWS MOVIE LOCAL SPORTS BLOCK 1 BLOCK 2 BLOCK 3 GROUP PAGES FOOT BALL BASKETBALL TENNIS SKI JUDO SWIM GROUP 1 GROUP 2 GROUP 3 GROUP 4 INDEX Displaying Subtitle Y ou can display several subtitles as they are transmitted. Press [ to display the subtitle. • Subtitle i[...]

66 Appendix • No power . • Unit cannot be operated. • Remote control unit does not operate. • Pictur e is cut off. • Strange colour , light colour , or dark, or colour misalignment. • Power is suddenly turned off. • No pictur e. • No sound. Problem P ossible Solution • Make sure the Display and the A VC System are connected correc[...]

67 Appendix PC compatibility c har t Apple and Macintosh ar e register ed trademarks of Apple Computer , Inc. DDC is a r egistered trademark of V ideo Electronics Standards Association. Power Management is a register ed trademark of Sun Microsystems, Inc. VGA and XGA are r egistered trademarks of International Business Machines Co., Inc. PC/MA C Re[...]

68 RS-232C port specifications Return code Command 4-digits Parameter 4-digits PC Contr ol of the System • When a program is set, the display can be contr olled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic [...]

69 Commands P I I I I D C C I I I I I I I I I I I I I I I I A A A A A A V POWER OFF (STANDBY) INPUT SWITCHING (TOGGLE) TV (CHANNEL FIXED) INPUT1 – 5 (1 – 5) CARD TV DIRECT CHANNEL (1 – 99) CHANNEL UP CHANNEL DOWN INPUT1 (AUTO) INPUT1 (COMPONENT) INPUT1 (VIDEO) INPUT2 (AUTO) INPUT2 (S-VIDEO) INPUT2 (VIDEO) INPUT3 (AUTO) INPUT3 (COMPONENT) INPU[...]

70 Appendix Item 32 o LCD COLOUR TV , Model:LC-32G2X (Display) TU-32GAX (A VC System) Video Colour System P AL/SECAM/NTSC 3.58/NTSC 4.43/P AL 60 TV Function P AL: B/G, D/K, I, P AL-60 SECAM: B/G, D/K, K/K 1 NTSC: M TV -Standard (CCIR) Specifications LCD panel 32 o Advanced Super View & BLACK TFT LCD Number of dots 3,147,264 dots (1366 g 768 g 3[...]

71 Dimensional dra wings 307 89.4 70.5 671 307 980 566 480 700.4 395.1 328 795 200 200 110 Unit: mm Display LC-32G2X LC-32/37G2X-K 04.5.22, 0:03 PM 71[...]

72 Dimensional drawings Unit: mm Display LC-37G2X 307 89.4 70.5 671 307 635 548 822.6 463.8 362 200 200 115 1102 917 LC-32/37G2X-K 04.5.22, 0:03 PM 72[...]

73 Dimensional drawings 365 303 220 49 5 430 95 Unit: mm A VC System LC-32/37G2X-K 04.5.22, 0:03 PM 73[...]

74 HO W T O SET THE F A CT OR Y PRESETS T urn off the Display by pressing MAIN PO WER . Press and hold down RESET on the A VC System and press MAIN PO WER on the Display to turn on the System. All setting items (except TV channel) return to the factory presetting. NO TE • Running the factory presetting operation also clears the password. Y ou can[...]

FOR LOCA TION ENQUIRIES WITHIN REGARDING Y OUR LOCAL SHARP APPR O VED SER VICE CENTRE VISIT OUR WEBSITE A T www .shar p .net.au OR CALL SHARP A USTRALIA LOCAL CALL 1 300 135 022 SHARP CORPORA TION OF A USTRALIA PTY L TD FOR PRODUCTS PURCHASED CONT ACT Y OUR SELLING DEALER/RET AILER OR CALL SHARP CUST OMER SER VICES TELEPHONE: 09 573 0111 F ACSIMILE[...]

LCD COLOUR TELEVISION OPERA TION MANU AL 32 o DISPLA Y A VC SYSTEM LC-32G2X/ TU-32GAX 37 o DISPLAY AVC SYSTEM LC-37G2X/ TU-37GAX Printed in Japan TINS-B308WJZZ 04P06-JKG IMPOR T ANT NOTICE: This warranty applies only to products sold in A ustralia & Ne w Zealand WARRANTY Consumer Electronic Pr oducts Congr atulations on Y our Purchase! This Sha[...]