Siemens BS2000/OSD инструкция обслуживания

U25339-J-Z126-1-7600 1 1 Intr oduction The range of BS2000/OSD servers has been e xtended b y the addition of the S130 series. The spectrum of user facilities of the ne w models lies between the S110 and H130 ser v er series. The y are powerful systems f or scientific and commercial applications. The S130 Business Ser ver (or cluster) has a modula[...]

2 U25339-J-Z126-1-7600 Summary of contents Introduction 1.2 Summary of contents This operating man ual cov ers the hardware operating functions of the S130 Business Ser ver with the 3970-SKP service/console processor . The chapters “Ov er view”, “Controls and indicators” and “Standard processing in SVP mode” provide inf or mation on har[...]

U25339-J-Z126-1-7600 3 2 Impor tant instructions This chapter cov ers the most impor tant safety instructions. It also includes some man uf ac- turer instructions and notes on radio interf erence. 2.1 Safety instructions This de vice fulfills the pre vailing saf ety requirements f or information technology equipment, including electrical office m[...]

4 U25339-J-Z126-1-7600 Manufacturer instructions Important instructions ● The cab les must be laid in such a wa y that there is no danger of any one tripping ov er them and the y cannot be damaged. ● Data transmission lines m ust not be connected or disconnected dur ing electr ical stor ms. ● Ensure that no f oreign bodies (e.g. nec klaces, p[...]

U25339-J-Z126-1-7600 5 3 Overview This chapter provides inf or mation on the configuration le v els and the configuration of the S130 Business Ser ver series and the concept of system operation. Figure 2: S130 Business Ser ver , global storage and batter y unit The S130 Business Ser ver comprises two cabinets together with an additional cabinet f[...]

6 U25339-J-Z126-1-7600 Configuration levels of the S130 Business Server Overview If the HVZ (high-a vailability f eature) option S130K-1H is a vailab le, a def ectiv e processor can be replaced with the high-av ailability processor (the high-a vailability f eature is only av ailable f or the models S130-C , S130-E and S130-P). Figure 3: Hardware o[...]

U25339-J-Z126-1-7600 7 Overview Concept of system operation 3.2 Concept of system operation System operation is described in the chapter “Basics of system operation“ of the “SINIX-2000 V7.0“ [1] manual. The f ollowing section lists the most impor tant hardware and softw are components for S130 operation. 3.2.1 Har dware The f ollowing hardw[...]

8 U25339-J-Z126-1-7600 Concept of system operation Overview ● The ser vice/console processor (3970-SKP) with the SINIX operating system. Operation of the S130 system tak es place via a local PC: the 3970-SKP ser vice/console processor . S130 and 3970-SKP communicate with one another in three w ays: – ser ial line (V .24) – type-2 I/O channel [...]

U25339-J-Z126-1-7600 9 Overview Concept of system operation 3.2.2 Software The f ollowing softw are components play an impor tant role in S130 operation: ● Window interf ace The SINIX operating system is run on the 3970-SKP . One component of SINIX is the window interf ace based on the X Window system (see the ”SINIX-2000 V7.0” [1] manual). A[...]

10 U25339-J-Z126-1-7600 Concept of system operation Overview 3.2.3 A uthorization contr ol The access to operation of the BS2000, SVP and SINIX system components is protected: ● Access to the BS2000 console If y ou tr y to make an entry in a BS2000 control window after the system has been star ted up for the first time , you will be requested to[...]

U25339-J-Z126-1-7600 11 4 Contr ols and indicator s The f ollowing controls and indicators are pro vided for the S130 Business Server: – control panel on the Business Ser ver cabinet, page 12 – control panel on the global storage cabinet, page 12 – EMERGENCY ST OP s witch, page 19 The S130 is operated using the oper ator ter minals on the ser[...]

12 U25339-J-Z126-1-7600 Contr ol panel on the Business Ser ver cabinet Controls and indicators 4.1 Contr ol panel on the Business Ser ver cabinet The control panel is connected with the ser vice processor (SVP) in the S130 Business Ser ver . The ph ysical str ucture of the control panel is illustrated in the f ollo wing diagram: Figure 4: Control p[...]

U25339-J-Z126-1-7600 13 Controls and indicators Control panel on the Business Server cabinet Inf or mation is displa yed on the LCD displa y in the f ollowing f or mat: Meanings: Line Displa y field Displa y Meaning Line 1 Maintenance mode none User mode CE Maintenance mode CM Hot system maintenance mode T est mode none Nor mal mode T T est mode C[...]

14 U25339-J-Z126-1-7600 Contr ol panel on the Business Ser ver cabinet Controls and indicators PO WER COMPLETE This green light illuminates after the system po wer controller has ter minated the s witching on sequence without errors. The light is e xtinguished when the POWER OFF k ey is pressed. SYSTEM This green light illuminates when the processi[...]

U25339-J-Z126-1-7600 15 Controls and indicators Control panel on the Business Server cabinet 4.1.2 Button functions LCD B A CK LIGHT The LCD displa y ST A TUS (background) is illuminated f or fiv e minutes when y ou press this b utton. The lights go out immediately when you press this b utton again. PO WER ON When this b utton is pressed, the powe[...]

16 U25339-J-Z126-1-7600 Contr ol panel on the global storage cabinet Controls and indicators 4.2 Contr ol panel on the global storage cabinet The control panel is connected to the ser vice processor in global storage. The ph ysical str ucture of the control panel is illustrated in the f ollo wing diagram: Figure 5: Control panel on the global stora[...]

U25339-J-Z126-1-7600 17 Controls and indicators Control panel on the global storage cabinet The inf or mation is shown on the LCD displa y in the f ollowing f or mat: Meanings: Line Displa y field Display Meaning Line 1 Maintenance mode none User mode CE Maintenance mode CM Hot system maintenance mode T est mode none Nor mal mode T T est mode SSU [...]

18 U25339-J-Z126-1-7600 Contr ol panel on the global storage cabinet Controls and indicators PO WER COMPLETE This green light is lit up after the system po w er controller has terminated the switching on sequence without any errors . The light is e xtinguished when the POWER OFF b utton is pressed. SSU CHECK The displa y illuminates if there is an [...]

U25339-J-Z126-1-7600 19 Controls and indicators EMERGENCY STOP switch 4.3 EMERGENCY ST OP switc h Not only the Business Ser ver cabinet, b ut also the global storage and battery cabinets each ha ve an EMERGENCY ST OP switch. If the EMERGENCY ST OP s witch on the S130 is pressed, global storage is also s witched off . If you wish to cut po wer to th[...]

Eine Dokuschab lone v on F rank Flachenec k er b y f .f . 1992[...]

U25339-J-Z126-1-7600 21 5 Switching the S130 Business Server on and off This chapter describes the various technical options f or switching the S130 Business Ser ver on and off , depending on the hardware. 5.1 Switching the S130 on and off using the contr ol panel If the SKP is not link ed to the S130 via the on/off facility (optional), the S130 m [...]

22 U25339-J-Z126-1-7600 Switching the S130 on and off using the contr ol panel When both systems are ready , i.e. all windo ws on the 3970-SKP hav e been opened and the LCD displa y on the S130 no longer shows an y P codes, y ou can log in on the SVP (see page 34ff) and star t the BS2000 system via PROGRAM LO AD FRAME: DET AIL-1 (see page 51). If a[...]

U25339-J-Z126-1-7600 23 Switching the S130 on and off from the SKP c) Y ou can also ter minate the SINIX system using the on/off button on the SKP . Ho we v er , please mak e note of the follo wing: If the SKP is s witched off using the button, it sends the command /shutdo wn or a self-defined /run xxxx command to any running BS2000 system before [...]

24 U25339-J-Z126-1-7600 Switching the S130 on and off fr om the SKP Y ou access the “Switching on / off the host” f or m via the sysadm menu: Ê Select or open a SINIX screen Ê Login: root or sysadm Ê Enter pass word Ê F or login with root: enter sysadm The SINIX system administration windo w is display ed. Ê Select the menu item “sinix_2[...]

U25339-J-Z126-1-7600 25 Switching the S130 on and off from the SKP Ê Select the menu item “host”: Ê Select the menu item “host - The P ow er ON/OFF of the Host”:[...]

26 U25339-J-Z126-1-7600 Switching the S130 on and off fr om the SKP The “Switching on / off the host” f or m is displa yed: Inf or mation on operation of the FMLI interf aces can be f ound in the “SINIX-2000 V7.0” manual [1]. By entering YES for one of the tw o questions at the bottom of the f or m f ollo wed b y the ( CHOICES ) ke y , you [...]

U25339-J-Z126-1-7600 27 Switching the S130 on and off from the SKP The s witching operating is perf or med after you press the ( SAVE ) key . P3[...]

28 U25339-J-Z126-1-7600 A utomatic switching on/off of the S130 via the SKP 5.3 A utomatic s witching on/off of the S130 via the SKP T o s witch the S130 on and off from the SKP , it must ha v e the optional on/off f acility . The on/off f acility is linked to the SKP via the V .24 interf ace COM2. Y ou access the “Switching on / off the host” [...]

U25339-J-Z126-1-7600 29 Automatic switching on/off of the S130 via the SKP The “Switching on / off the host” f or m is displa yed:´ By entering YES for the tw o questions at the top of the window , you can specify whether the S130 should be s witched on automatically if the 3970-SKP is s witched on or SINIX is star ted on the 3970-SKP , and wh[...]

30 U25339-J-Z126-1-7600 Time-driven switc hing on and off of the SKP and S130 5.4 Time-driven s witching on and off of the SKP and S130 The SKP can s witch itself and the S130 on and off at a cer tain time. Definition of the time at which the SKP and the S130 are to be s witched on/off , a shutdown command, and the length of the w ait time bef ore[...]

U25339-J-Z126-1-7600 31 Switching the SKP and S130 on and off using ATOP 3914 5.5 Switching the SKP and S130 on and off using A T OP 3914 The S130 can also be s witched on automatically using the SKP in conjunction with the A T OP 3914. The optional on/off facility is required f or this. Fur ther more, the S130 m ust be configured to s witch on an[...]

32 U25339-J-Z126-1-7600 Switching the S130 on and off fr om a remote system 5.6 Switching the S130 on and off fr om a remote system Switching on and off can be carried out from a remote system using a modem/DCU . Inf or mation on operating the DCU can be f ound in the data sheet “8323 Data Communi- cation Unit“ [5]. The optional on/off f acilit[...]

U25339-J-Z126-1-7600 33 6 Standar d pr ocessing in SVP mode Jobs are assigned to the ser vice processor via special SVP menus, so-called SVP fr ames. All the inf or mation you require as an oper ator working with SVP frames can be f ound in this chapter . Y ou will find instr uctions on the use of all user frames in the original “GS8600 MODEL GR[...]

34 U25339-J-Z126-1-7600 In v oking an SVP frame Standard processing in SVP mode 6.1 In v oking an SVP frame By def ault, an SVP window is configured with the label “SVPST0 #1 (computer name)” to operate the SVP . Figure 7: Ov er view of the X window system windo ws (example) Y ou can enter into SVP operator mode at the operating terminal by cl[...]

U25339-J-Z126-1-7600 35 Standard processing in SVP mode Invoking an SVP frame Figure 8: SVPST0 #1 window Ê Select the “Standard par tner ($KVPHV0)” function by pressing the ke y or “Last connection ($KVPHV0)” b y pressing the ke y . Confir m with the k ey . S C ENTER[...]

36 U25339-J-Z126-1-7600 In v oking an SVP frame Standard processing in SVP mode The pass word entr y window is displa y ed: Figure 9: SVPST0 #1 window (pass word entry) Ê Enter the pass word f or the specified user ID and press . If the correct pass word has been entered, the f ollowing windo w appears after a shor t pause: – after star ting th[...]

U25339-J-Z126-1-7600 37 Standard processing in SVP mode General frame structure 6.2 General frame structure Figure 10: General structure of an SVP frame Each SVP frame is divided into diff erent areas: Lines 1 - 21 This is the displa y area of a fr ame . Here the functions and parameters that ma y be selected or output are displa yed. Hardw are-rel[...]

38 U25339-J-Z126-1-7600 General frame structure Standard processing in SVP mode 6.2.1 System status messages in line 22 Figure 11: F or mat of the status display in line 22 Meaning of the status inf or mation in line 22: Column Symbol Meaning 16 - 19 CL -n Cluster ID of the S130; normally CL - 0 22 - 27 none HOST GUEST The system is operated in BS2[...]

U25339-J-Z126-1-7600 39 Standard processing in SVP mode General frame structure 46 - 55 SYS-DO WN CL-ST OP CHK-ST OP COMP-ST OP ST OP PSW -LOOP W AIT RU N LOAD The system ma y be in the system down state. This displa y can also appear when Write-Console messages are output (e.g. SHUTDOWN COMPLETED) and can be deleted with the ke y . In multiple-clu[...]

40 U25339-J-Z126-1-7600 General frame structure Standard processing in SVP mode 6.2.2 System status messages in line 23 The f ollowing picture sho ws the extended area of the system status messages in line 23: Figure 12: F or mat of the extended area of the status displa y in line 23 Meaning of the status messages in line 23: Column Symbol Meaning [...]

U25339-J-Z126-1-7600 41 Standard processing in SVP mode General frame structure 6.2.3 Har dware status displa y in line 24 The f ollowing diagr am shows the f or mat of the hardware status displa y in line 24: Figure 13: F or mat of the status display in lines 24 and 25 Meaning of the status inf or mation in line 24: The FLA G code represents a mes[...]

42 U25339-J-Z126-1-7600 Using frames Standard processing in SVP mode 6.3 Using frames Y ou assign a job to the SVP by in v oking the rele vant frame , selecting the desired function, and specifying the required parameters . T o select a function or specify a parameter , you must enter the alphan umer ic characters shown in the fr ame in the input ?[...]

U25339-J-Z126-1-7600 43 Standard processing in SVP mode Using frames Overview of the SVP function ke ys The f ollowing o ver view sho ws the ke ys and their functions as valid f or most SVP fr ames. In some SVP frames k eys can ha v e another function. This is then shown in the corresponding SVP frame description. Some of the k eys shown here only [...]

44 U25339-J-Z126-1-7600 Using frames Standard processing in SVP mode PF 18 Step Ex ecutes the ne xt command if the S130 is in Single Cycle Instruction Mode. PF 19 ARMSS control Changes the user rights of an existing ARMSS connection. PF 20 Stop only in CE mode : stops the selected CPU PF 21 Star t Star ts the selected CPU PF 22 not assigned PF 23 M[...]

U25339-J-Z126-1-7600 45 Standard processing in SVP mode Using frames 6.3.2 Switching between user frames A s witch between the user frames is only possib le within a specified scheme or via an FR command. The possib le switches betw een the frames are illustrated belo w: Figure 14: Switching between the frames Explanation of figure 14 The frames [...]

46 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.3.3 Options f or switching between frames on the SKP operating terminal The f ollo wing tab le sho ws the options f or s witching to another frame on the SKP operating ter minal. 6.4 User frames and subframes The user frames are used b y the operator f or sending jobs to the SVP [...]

U25339-J-Z126-1-7600 47 Standard processing in SVP mode User frames 6.4.1 (ML) MODE SELECTION FRAME Figure 15: MODE SELECTION FRAME screen By making entries in this frame and pressing , you can s witch to other frames or e x ecute various basic functions. FUNCTION => per mits either the entr y of a number listed in the EXECUTION column or a lett[...]

48 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode EXECUTION The f ollowing functions are e x ecuted after the appropriate number is entered in the input fields: The functions are e x ecuted according to the entr ies in the CPU SELECT and ST OP/ST AR T MODE fields (see table on ne xt page)! 1 CPU ST OP stops either the CPU select[...]

U25339-J-Z126-1-7600 49 Standard processing in SVP mode User frames Note The f ollowing tab le shows all the functions that can be meaningfully combined: Function CPU SELECT ST OP/ST AR T MODE Eff ect on: CPU ST OP - 1 All CPU all CPUs 0 ... 7 2 T ARGET CPU selected CPU INTERR UPT ST ORE ST A TUS REST AR T 0 ... 7 2 T ARGET CPU selected CPU T OD EN[...]

50 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.2 (LD) PR OGRAM LO AD FRAME: B ASIC Figure 16: PROGRAM LO AD FRAME: BASIC screen An IPL is e x ecuted by entering a load function and pressing the ke y . The predefined parameters in (A U5) A UXILIAR Y FRAME: LOAD PRESET are used. LO AD FUNCTION => The f ollowing functions [...]

U25339-J-Z126-1-7600 51 Standard processing in SVP mode User frames 6.4.2.1 (LD) PR OGRAM LO AD FRAME: DET AIL-1 Figure 17: PROGRAM LO AD FRAME: DET AIL-1 screen By making entries in this screen and pressing the ke y you can control the e x ecution of an IPL. LO AD FUNCTION => The f ollowing functions are e x ecuted after the corresponding numbe[...]

52 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode If IPL is ter minated nor mally , the device address list is transf erred from the PRESET GR OUP to the CURRENT GR OUP . If the IPL is unsuccessful, the ne xt de vice address from the PRESET GR OUP is reloaded. If this loading is ter minated nor mally , this device address heads th[...]

U25339-J-Z126-1-7600 53 Standard processing in SVP mode User frames DET AIL-2 ST A TUS In this position the current settings of the PROGRAM LO AD FRAME: DET AIL-2 are displa y ed. Chec k the settings . If the y are correct, e x ecute the IPL by pressing . If not, press the k ey to correct the entries in PROGRAM LO AD FRAME: DET AIL-2. Special ke y [...]

54 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.2.2 (LD) PR OGRAM LO AD FRAME: DET AIL-2 Figure 18: PROGRAM LO AD FRAME: DET AIL-2 screen By making an entr y in this frame and pressing , y ou can set the operating mode. VM MODE => Selection of the fir mware to be loaded from SVP 1 NA TIVE f or BS2000 operation 2 EMOS not[...]

U25339-J-Z126-1-7600 55 Standard processing in SVP mode User frames Special ke y functions Sets operating mode . If a loading function has previously been stored in PR OGRAM LO AD FRAME: DET AIL-1 with the ke y , an IPL with the set parameters is e x ecuted. Switches to PR OGRAM LOAD FRAME: BASIC (page 50) Switches to PR OGRAM LOAD FRAME: DET AIL-1[...]

56 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode Figure 20: ST A TUS DISPLA Y FRAME: SSU screen This displa ys inf or mation on the status of the connected global storage. Memor y size , batter y status, po wer status, online status , and connect status are displa yed. Special ke y functions Switches to the CLUSTER FRAME (see pre[...]

U25339-J-Z126-1-7600 57 Standard processing in SVP mode User frames 6.4.4 (MA) MANU AL OPERA TION FRAME Figure 21: MANU AL OPERA TION FRAME screen By making an entr y in this frame and pressing , y ou can ex ecute various manual operations . Instructions on this frame are only e xecuted when the CPU has been stopped (see message in frame line 23). [...]

58 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode The f ollowing tab le shows the additional entries required f or each of the three main functions in other input fields: RA TE CONTROL => Defines progr am operation 1 PR OCESS continual prog ram operation 2 I-STEP step-b y-step command ex ecution ADRS TYPE => Entr y f or ad[...]

U25339-J-Z126-1-7600 59 Standard processing in SVP mode User frames ADRS COMP MODE => Address compare stop mode 1 RESET Switches off address compare stop and resets address compare stop conditions in the fields ADRS TYPE, ADRS COMP SELECT and ADRS SET 2 SET Switches on address compare stop 3 NORMAL Switches off address compare stop 6.4.5 (AD) A[...]

60 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode F A CILITY => P ossible displa ys of memor y areas with various addres- ses: L LOGICAL logical storage address R REAL real storage address P P-VIR TU AL pr imar y vir tual storage address S S-VIR TU AL secondar y vir tual storage address ABS absolute address KEY memor y protect [...]

U25339-J-Z126-1-7600 61 Standard processing in SVP mode User frames FUNCTION => The f ollowing functions are e x ecuted after the appropriate letter is entered and is pressed: A AL TER change and modify register contents D DISPLA Y displa y register contents F A CILITY => P ossible displa ys of registers: GR General register PSW Progr am stat[...]

62 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.6 (ME) MESSA GE FRAME Figure 24: MESSA GE FRAME screen All SVP messages and commands to the SVP are stored in a message file and can be vie wed in the MESSA GE FRAME. Special ke y functions one page f orwards , in the direction of the newer entries one page bac kwards, in the [...]

U25339-J-Z126-1-7600 63 Standard processing in SVP mode User frames 6.4.7 (CH) CH/SUBCH ST A TUS DISPLA Y FRAME: CHANNEL Figure 25: CH/SUBCH ST A TUS DISPLA Y FRAME: CHANNEL screen By making entries in the input fields and pressing , y ou can displa y the status of the I/O system. Fur ther subframes are supplied in connection with FUNCTION 2 and 3[...]

64 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode LINKADR => link address f or type-S channel 01 without director with director : 00 ... FE output por t address = link address LCU ADR => logische control unit address no input required PCHAD => ph ysical channel address 00 ... FF Special ke y functions Displa y of channel [...]

U25339-J-Z126-1-7600 65 Standard processing in SVP mode User frames 6.4.8 (A U) A UXILIAR Y FRAME: MENU Figure 26: A UXILIAR Y FRAME: MENU screen Y ou can mov e to other frames b y making entries in this menu frame and pressing . SELECTION => The f ollowing subframes are displa yed on the screen b y enter ing the appropriate number : 1 REAL CLOC[...]

66 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.8.1 (A U1) A UXILIAR Y FRAME: REAL CLOCK Figure 27: A UXILIAR Y FRAME: REAL CLOCK screen When the screen is in vok ed, the current date and time of the SVP are displa y ed. Press the k ey bef ore making an entr y . Corrections can be entered in the line below . These correction[...]

U25339-J-Z126-1-7600 67 Standard processing in SVP mode User frames 6.4.8.2 (A U2) A UXILIAR Y FRAME: IORSF CONTROL Figure 28: A UXILIAR Y FRAME: IORSF CONTR OL screen The IORSF files are displa yed in this file. The file n umber of the current IORSF is display ed in the CURRENT NO. = field. When y ou select a function and press the k ey , para[...]

68 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode SPECIFY SW AP NO . <=> Enter two file n umbers which are to be sw apped. Y ou can only make entries if you select function 1 bef orehand. Special ke y functions Sets 4 to 7 are displa yed Sets 0 to 3 are displa yed 6.4.8.3 (A U3) A UXILIAR Y FRAME: RELA TED SCB’S This fram[...]

U25339-J-Z126-1-7600 69 Standard processing in SVP mode User frames 6.4.8.4 (A U4) A UXILIAR Y FRAME: P-OFF/IMPL Figure 30: A UXILIAR Y FRAME: P-OFF/IMPL screen By making an entr y in this frame and pressing , y ou can switch the S130 off or re- initialize it. FUNCTION => The f ollowing functions are e x ecuted when the appropriate number is ent[...]

70 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.8.5 (A U5) A UXILIAR Y FRAME: LO AD PRESET1 Figure 31: A UXILIAR Y FRAME: LO AD PRESET1 screen Y ou can predefine the e xecution of an IPL b y making an entr y in this frame and pressing : ST ART MODE => Predefine the loading mode b y entering the appropr iate number and c[...]

U25339-J-Z126-1-7600 71 Standard processing in SVP mode User frames 1 ENABLE automatically e x ecutes IPL after IMPL 2 DISABLE does not e xecute IPL, i.e . IPL must be triggered manually using PR OGRAM LOAD FRAME: BASIC or PR OGRAM LOAD FRAME: DET AIL-1. INITIAL FRAME => Here y ou can set the display f orm of the PROGRAM LO AD FRAME. 1 LO AD FRA[...]

72 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode EXA MODE => Selection of addressing mode 1 ENABLE e xtended XA mode 2 DISABLE not used on the S130 Business Ser ver ST ART IPL NO => Selection of the IPL Star t Mode number 1 FIX(1) Star t Mode number 1 (automatic star t) 2 CURRENT Star t Mode number of most recently e x ecut[...]

U25339-J-Z126-1-7600 73 Standard processing in SVP mode User frames FUNCTION => The f ollowing functions are carried out by entering the appropriate number : 1 DISPLA Y CFR displa ys current configuration 2 INIT CFR FILE NO . activ ates selected FILE after IMPL, enter a number in the INIT CFR FILE NO. => field 3 DISPLA Y FILE displays con?[...]

74 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.9 (MF) MSF FRAME Figure 34: MSF FRAME screen The SVP logs all FLA G codes, whereby the most recent code is gener ally shown in line 24. Special ke y functions one page bac kwards, in the direction of the ne wer entries one page f orwards , in the direction of the older entr ies[...]

U25339-J-Z126-1-7600 75 Standard processing in SVP mode User frames F rame line 24: Y ou can s witch to FLA G code entr ies of other components by making the f ollo wing entries in line 24: ssu0: FLA G code entr ies of SSU0 ssu1: FLA G code entr ies of SSU1 self: bac k to the FLAG code entries of the cluster ----- MSF FRAME: FLAG CODE LOG DISPLAY -[...]

76 U25339-J-Z126-1-7600 User frames Standard processing in SVP mode 6.4.10 (P A) PERFORMANCE ANAL YZER Figure 35: PERFORMANCE ANAL YZER FRAME screen The P A fr ame is not intended for use . ---- PERFORMANCE ANALYZER FRAME ---- E02L01F FUNCTION => STATUS DISABLE / STOP 1 ENABLE & ITEM SELECT LOGGING STOP 2 DISABLE 3 START & DISPLAY -- CHP[...]

U25339-J-Z126-1-7600 77 Standard processing in SVP mode Selecting IORSF 6.5 Examples of standar d pr ocessing in SVP mode 6.5.1 Selecting IORSF The steps listed below are conditions f or the loading of a par ticular IORSF at the next IMPL or the ne xt time the system is s witched on. In the f ollowing e xample the IORSF is selected with Le v el 2. [...]

78 U25339-J-Z126-1-7600 Selecting IORSF Standard processing in SVP mode The A UXILIAR Y FRAME: MENU screen is displa yed Figure 37: A UXILIAR Y FRAME: MENU screen In voking IORSF Contr ol F rame Ê Enter 2 in the SELECTION=> field. Press . If the frame code AU2 is entered in the MODE SELECTION FRAME or the FR AU2 command is entered in line 24, [...]

U25339-J-Z126-1-7600 79 Standard processing in SVP mode Selecting IORSF The A UXILIAR Y FRAME: IORSF CONTR OL screen is display ed: Figure 38: A UXILIAR Y FRAME: IORSF CONTR OL screen The first f our IORSF are displa yed in the upper por tion of the screen. Y ou can s witch to the ne xt f our with the ke y , and back with the ke y . In this e xamp[...]

80 U25339-J-Z126-1-7600 Activ ating IORSF Standard processing in SVP mode 6.5.2 Activ ating IORSF The set IORSF must be activ ated with a IMPL: Conditions Y ou must be in the A UXILIAR Y FRAME: IORSF CONTR OL screen. Ê Press to switch bac k to the A UXILIAR Y FRAME: MENU . Ê Enter 4 in the SELECTION=> field. Press . The A UXILIAR Y FRAME: P-O[...]

U25339-J-Z126-1-7600 81 Standard processing in SVP mode PROGRAM LOAD FRAME PRESET1 6.5.3 Setting up PR OGRAM LO AD FRAME PRESET1 In this e xample, y ou specify: ● LO AD function 1 with the name A UT O (A UT O=A utomatic Star tup) f or a POWER ON IPL ● De vice number of the IPL de vice to be used f or a PO WER ON IPL (current: 0108) ● A utomat[...]

82 U25339-J-Z126-1-7600 PR OGRAM LO AD FRAME PRESET1 Standard processing in SVP mode The A UXILIAR Y FRAME: LO AD PRESET1 screen is display ed: Figure 40: A UXILIAR Y FRAME : LOAD PRESET1 screen Y ou can reach this screen directly from the MODE SELECTION FRAME by entering the frame code AU5 in the FUNCTION=> field or the command FR AU5 in line [...]

U25339-J-Z126-1-7600 83 Standard processing in SVP mode PROGRAM LOAD FRAME PRESET2 6.5.4 Setting up PR OGRAM LO AD FRAME PRESET2 In the PR OGRAM LOAD FRAME PRESET2 y ou specify which operating mode is to be set after the S130 system is s witched on. The f ollowing are specified in the e xample below: ● VM2000 operating mode ● EXA mode ● A ut[...]

84 U25339-J-Z126-1-7600 IPL in PR OGRAM LO AD FRAME: DET AIL-1 Standard processing in SVP mode Catalog par ameters Ê Press the ke y . The v alues entered are sav ed and thus made known to the SVP . These settings are accessed f or each IPL. 6.5.5 Executing IPL in PR OGRAM LO AD FRAME: DET AIL-1 The IPL can be e x ecuted manually 1according to the [...]

U25339-J-Z126-1-7600 85 Standard processing in SVP mode IPL in PROGRAM LOAD FRAME: DETAIL-1 In this e xample, the PR OGRAM LOAD FRAME: DET AIL-1 screen is display ed: Figure 42: PROGRAM LO AD FRAME: DET AIL-1 screen LO AD FUNCTION => Enter 3 f or dialog star tup . IPL DEVICE => Enter 3 . UNIT ADDRESS => Enter the de vice address of the loa[...]

86 U25339-J-Z126-1-7600 IPL in PR OGRAM LO AD FRAME: DET AIL-1 Standard processing in SVP mode DET AIL-2 ST A TUS The settings in DET AIL-2 FRAME are displa y ed in detail. Chec k the settings. If they are correct, e xecute the IPL (see below), if not, correct the entries in DET AIL-2 FRAME (see section “Setting oper ating mode via PR OGRAM LOAD [...]

U25339-J-Z126-1-7600 87 Standard processing in SVP mode Setting operating mode 6.5.6 Setting operating mode via PR OGRAM LO AD FRAME: DET AIL-2 The operating mode can be reset using the PR OGRAM LOAD FRAME: DET AIL-2. This selects the appropriate fir mware f or r unning BS2000 or VM2000. The f ollowing are specified in the e xample below: ● VM2[...]

88 U25339-J-Z126-1-7600 Setting operating mode Standard processing in SVP mode Activating settings Ê After y ou hav e check ed all the settings, press . The f ollowing prompt appears: Press to ex ecute the IPL or to cancel the procedure. Confir m your input with . ENTER *********************************** * * * ARE YOU SURE ? (ENTER Y OR N) N * *[...]

U25339-J-Z126-1-7600 89 7 Operating the BS2000 console Selecting the console window At the operator terminal, you enter system operating mode b y clicking the windo w CONS0 #1<computer name> with the left mouse button. System operation When the BS2000 console window is opened, no input is permitted. If you attempt to mak e an entr y , you are[...]

Eine Dokuschab lone v on F rank Flachenec k er b y f .f . 1992[...]

U25339-J-Z126-1-7600 91 8 T r oubleshooting This chapter describes what to do out in case of malfunction. 8.1 Pr oblems with the S130 In the case of a prob lem with the S130, contact the ser vice depar tment and discuss the steps to be tak en. Depending on the outcome of this discussion, you ma y be required to carr y out the f ollowing tasks: – [...]

92 U25339-J-Z126-1-7600 Pr oblems with the S130 Troubleshooting 8.1.1 Displa ys in the case of a hard ware error The S130 inf or ms you of hardw are errors in the f ollowing manner : ● On the S130 control panel If the y ellow CHECK light illuminates, there ma y be a hardw are error . At the same time, the FLA G code appears on the LCD display . T[...]

U25339-J-Z126-1-7600 93 Troubleshooting Problems with the S130 8.1.2 Carrying out a system dump Conditions: 1. Select the SVPST0 window 2. Select LD PR OGRAM LOAD FRAME 3. Select LO AD FUNCTION => 5 (SYSTEM DUMP) The system dump stored on hard disk or cassette b y the DUMP program is required f or error diagnosis. Afterwards , the BS2000/VM2000 [...]

94 U25339-J-Z126-1-7600 Pr oblems with the S130 Troubleshooting List of I/O channels: IOP0 (channel processor CHP 0 and 1) channel range 00 to 7F IOP1 (channel processor CHP 2 and 3) channel range 80 to FF If the first I/O processor (IOP0) f ails, system oper ation is no longer possib le due to the lac k of a console. If a logical console which wo[...]

U25339-J-Z126-1-7600 95 Troubleshooting Problems with the S130 Ê Once the message SHUTDOWN COMPLETED is display ed, s witch the S130 to CE mode by s witching the CE ke y on the inside of the maintenance panel of the S130 to the position “Maintenance Mode On”. The CE mode is indicated b y the display CE on the control panel of the S130 (see pag[...]

96 U25339-J-Z126-1-7600 Pr oblems with the S130 Troubleshooting Ê Press the ke y to retur n to the Index F rame . Ê Select the frame A U4 by entering the frame code AU4 and press the ke y . Ê Select the IMPL function b y enter ing 2 (IMPL activ ates the new setting) and confir m y our input by pressing the k ey . Respond to the f ollowing promp[...]

U25339-J-Z126-1-7600 97 Troubleshooting Problems with the service/console processor (SKP) 8.2 Pr oblems with the service/console pr ocessor (SKP) If y ou hav e problems with the SKP , contact the ser vice depar tment and discuss the steps to be tak en. Depending the outcome of this discussion, y ou may be required to do the f ollo wing: 1. Reboot t[...]

98 U25339-J-Z126-1-7600 Impor tant key combinations Troubleshooting 8.3 Impor tant key combinations If y our mouse is not wor king, y ou can use the ke ys + to mov e between the windows of the X-Windo ws window system. The f ollowing k ey combinations mak e your w or k easier : + Switch from the window system to the SINIX login screen + Retur n to [...]

U25339-J-Z126-1-7600 99 Related publications Please apply to y our local office for ordering the manuals . [1] SINIX-2000 V7.0 Installation, Operation and Administration User Guide T ar get gr oup This manual is intended f or privileged users (operators, system administr ators) of the ser vice/console processor 3970-SKP , the channel adapter 3970-[...]

100 U25339-J-Z126-1-7600 Related publications [4] TELESER VICE - TSB2000 (BS2000/OSD Ser ver) User Guide T ar get gr oup The manual addresses the oper ating personnel of the C50, C70, C80, H100, S110, S130 and SR2000 mainframes . Kno wledge of BS2000 and basic SINIX knowledge are required to operate TELESER VICE. Contents Ser vice technicians use T[...]

U25339-J-Z126-1-7600 101 Inde x A AL TER/DISPLA Y FRAME (AD) 59 AL TER/DISPLA Y FRAME (subframe) 60 A T OP 8 s witching the S130 on/off 31 authorization control 10 AU TO 8 1 A UXILIAR Y FRAME IORSF CONTR OL 79 LO AD PRESET1 82 LO AD PRESET2 83 MENU 78 MENU (A U) 65 P-OFF/IMPL 80 A UXILIAR Y FRAME (A U1): REAL CLOCK 66 A UXILIAR Y FRAME (A U2): IORS[...]

102 U25339-J-Z126-1-7600 Index D displa y hardware errors 92 hardware status 41 displa ys in line 24 41 in line 25 41 E emergencies 3 EMERGENCY ST OP s witch 19 batter y cabinet 19 global storage 19 e x ecuting IPL in DET AIL-1 FRAME 84 F f or m - s witching on/off the host 26 frame code 45 frame name 45 frame structure 37 G global storage control [...]

U25339-J-Z126-1-7600 103 Index L line 22 + 23, messages 38 line 23, messages 40 line 24, displa ys 41 line 25, displa ys 41 loading BS2000 33 loading IORSF 77 M manual IPL 84 MANU AL OPERA TION FRAME (MA) 57 manuf acturer instructions 4 MCU (Memor y Control Unit) 96 MCU def ective 96 MESSA GE FRAME (ME) 62 messages in line 22 + 23 38 messages in li[...]

104 U25339-J-Z126-1-7600 Index S S130 control panel 12 b utton functions 15 function of the indicators 12 saf ety instr uctions 3 SCI (System Control Interf ace) 96 SCI def ective 96 screen A UXILIAR Y FRAME IORSF CONTR OL 79 LO AD PRESET1 82 LO AD PRESET2 83 MENU 78 P-OFF/IMPL 80 MODE SELECTION FRAME 47, 77 PR OGRAM LOAD FRAME 85 DET AIL-1 85 DET [...]

U25339-J-Z126-1-7600 105 Index automatically 28 b y hand 21 from a remote system 32 from SKP 23 time-driven 30 using the control panel 21 system components def ective 96 system operation 7 system status messages 40 U user frames 46 s witching between 45 X X window system windo ws 34[...]

Eine Dokuschab lone v on F rank Flachenec k er b y f .f . 1992[...]

U25339-J-Z126-1-7600 107 Contents 1 Intr oduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 Objectiv es and target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Summar y of contents . . . . . . . . . . . . . . [...]

108 U25339-J-Z126-1-7600 Contents 6 Standar d processing in SVP mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 6.1 In voking an SVP frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6.2 General fr ame str ucture . . . . . . . . . . . . . . . . . . . . . . [...]

U25339-J-Z126-1-7600 109 Contents 8 T roub leshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 8.1 Prob lems with the S130 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 8.1.1 Displa ys in the case of a hardware error . . . . [...]

Eine Dokuschab lone v on F rank Flachenec k er b y f .f . 1992[...]

U25339-J-Z126-1-7600 111 S130 Business Server Operating Manual T ar get gr oup The manual addresses privileged users (operators , system administrators) of the S130 Business Ser ver . Contents The manual describes the hardware of the S130 Business Ser v er insof ar as it is required f or system operation. In addition, all SVP frames are described w[...]