Siemens pocket 2011 Tango инструкция обслуживания

BK_FRONT.FM 18.7.99 ACHTUNG! Schnittkante ggf. auf Titelseite U1 nach außen versetzen wg. Falz-Ausklappseite s The cordless digital DECT telephone system expandable to 6 handsets Operating instructions Before starting up the equipment, pease read these operating instructions with the safety notes! Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Giga[...]

-II KAP00.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Dear Custome r , By purchasing your Gigaset 2 01 1 T ango , you now own a cordless telephone which combines the ad- vantages of "cordless telephone use" with the convenience of a high-quality telephone. It is suitable for private use both at home and in the office. The de[...]

-I KAP00.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Overview: Gigaset 20 11 T ango 1 2 3 4 Charging unit Paging key ( calling handsets ) Left LED for display "Line busy" Right LED for display "Charge batteries" 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Earpiece Display Display keys Menu key On-hook key Dialling pad [...]

0 KAP00.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Overview: Key functions and display symbols Key function Display Functions of display keys on handset Display symbols . to call up menu ; cancel = return to previous menu or main menu ; end a procedure without saving Menu items that can be opened with "OK" Menu items that c[...]

I KAP01.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Safety precautions ● Do not submerge batteries in water; do not throw them into fire. ● Do not dispose of old, defective batteries with normal household garbage. ● Batteries become warm during charging. This is nor- mal and not dangerous ● Do not use any third-party charging [...]

II KAP01.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Certification and CE marking The Siemens Gigaset  2011 T ango meets the requirements contained in EU guideline: 89/336/EEC "Electromagnetic Compatibility" The handset of the Siemens Gigaset  2000C T ango carries the "CE" symbol[...]

Contents III GIG2011T.IVZ 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Stepwise startup .......................................................................................................................... 1 Step 1: Observe the safety precautions .........................................................................................[...]

Contents IV GIG2011T.IVZ 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Handset settings ........................................................................................................................ 28 Setting the handset volume .......................................................................................................[...]

Contents V GIG2011T.IVZ 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Notes on operation .................................................................................................................... 61 Installing the base station .........................................................................................................[...]

Stepwise startup 1 Kap02.fm5 Gigaset 20 11 T ango: A30852-X 1106-B307-2-7619 18.7.99 Stepwise startup Step 1: Observe the safety precautions Step 2: Check the contents of the package The factory package contains : ● a Gigaset 2 01 1 T ango base station , ● a Gigaset 2000C T ango handset, ● a phone cord , ● a power cord with RJ- 1 1 plug and[...]

Stepwise startup 2 Kap02.fm5 18.7.99 Gigaset 20 11 T ango: A30852-X 1106-B307-2-7619 Phone cord Insert the RJ- 1 1 plug on your phone cord into the base sta- tion . The jack on the bottom of the base station is marked with the symbol. Insert the phone plug on your phone cord into your phone socket . Power cord Insert the RJ- 11 plug on your power c[...]

Stepwise startup 3 Kap02.fm5 Gigaset 20 11 T ango: A30852-X 1106-B307-2-7619 18.7.99 Step 5: Charging the batteries To charge the batteries, place the handset in the handset rest on the base station. The charging contacts on the bot- tom of the handset must come into contact with the bot- tom of the base station and its charging contacts. It does n[...]

Menu-driven operation 4 4 KAP03A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Menu-driven operation Menu structure Moving to higher menu levels and leaving a menu When you are in the top menu level, you can leave the menu by pressing . . If you are at a lower menu level, you can move up one level by pressing the display key without sav[...]

Menu-driven operation 5 5 KAP03A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Presentation in the user manual The selection of a function in one of the menus or sub- menus is depicted using symbols . For example, the fol- lowing entries must be made to obtain the confirm beep : Abbreviated presentation In the descriptions of procedures[...]

Operating modes 6 KAP04.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Operating modes ON/OFF/PROTECTED modes Y ou can switch your handset to ● protected mode , ● off , ● and on ( again ). In protected mode, the keypad is locked to prevent unin- tended use . Incoming calls are received automaticall y. If you want to make an outgoin[...]

Operating modes 7 KAP04.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 When the handset is switched off: Switching off the handset Signaling method The PTT operates telephone connections with two differ- ent signaling methods : ● Dial pulsing ( DP ) ● Dual-tone multifrequency signaling ( DTMF ) The factory default setting for your Gi[...]

Incoming calls 8 KAP05.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Incoming calls Accepting calls An incoming call is indicated by the ringer (bell symbol) . Y ou will know that it is an external call when you the fol- lowing message appears on your handset display Y ou will know that you are receiving an internal call if you see the [...]

Incoming calls 9 KAP05.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Ex tern al call-waiting during internal calls If you are on an internal call with a second handset and a external call arrives, this is indicated by the call-waiting function . Y our internal call is terminated when you accept the external call . The arrival of the ext[...]

External outgoing calls 10 KAP06.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1100-B301-2-7619 External outgoing calls Calling external subscribers Y ou will hear the ring tone . Dialing with call number checking (en-bloc dialing ) En-bloc dialing allows you to check the external call number entered before it is dialed and correct it, if neces- sar y ,[...]

External outgoing calls 11 KAP06.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1100-B301-2-7619 Manually inserting a pause If you repeatedly get the busy symbol following automatic dialing from the telephone director y , e.g. a f ter the country code, you can enter a pause (three seconds), e.g. be- tween the trunk or country code and the call number: ( [...]

External outgoing calls 12 KAP06.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1100-B301-2-7619 Dialing using the directory Y ou can store up to 100 call numbers with corresponding names in your handset directory ( ➔ page 19 ). Y ou can search for names and dial the numbers directly from the director y . ( t means: browse usin g x , confirm usin g u )[...]

External outgoing calls 13 KAP06.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1100-B301-2-7619 Device control using dual-tone multifrequency signaling (DTMF) If your telepone is connected to a line with dial pulsing (DP), you can switch to dual-tone multifrequency signaling (DTMF) once the connection has been set up. Precondition: an external connectio[...]

Collective ringing and internal calls 14 KAP07.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Collective ringing and internal calls Making collective calls to all handsets from the base station It can be useful to make a collective call from the base sta- tion, for example, to locate mislaid handsets . It is not pos- sible to make intern[...]

Collective ringing and internal calls 15 KAP07.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Allowing internal parties to listen in on a call It is possible to enable an internal party to listen in on a call with an external party from his/her handset . Disconnect internal party again Ending an internal call Switching off the microphone[...]

Internal consultation calls and transferring calls 16 KAP08.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Internal consultation calls and transferring calls During a external call it is possible to: ● hold a consultation call with an internal part y, ● transfer the external call to the internal part y . Consultation calls When more [...]

Internal consultation calls and transferring calls 17 KAP08.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 T ransferring calls When more than one handsets are in operation It is possible to transfer an external call to an internal party when more than one handset is in operation ( ➔ page 52). ( When a telephone system is in operation I[...]

Creating and managing the directory 18 KAP08A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Creating and managing the directory Y ou can store up to 100 entries in the electronic director y . The entries comprise: ● call numbers (maximum 32 digits), and ● names (maximum 16 characters). When you call up the director y, the names are [...]

Creating and managing the directory 19 KAP08A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Entering/copying/editing/deleting call numbers/names New Entry To add a new entry to the directory, select "New Entry". ( t means: browse usin g x , confirm usin g u ) When you select the "New Entry" menu item, the input funct[...]

Creating and managing the directory 20 KAP08A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Copying numbers Y ou can copy the last number dialed into the director y . Call up the "Copy Number" menu item in the additional menu. ( t means: browse usin g x , confirm usin g u ) Continue as described in the above section "Dire[...]

Creating and managing the directory 21 KAP08A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Delete entry Y ou can delete individual entries from the director y . Call up the "Delete Entry" menu item in the additional menu. ( t means: browse usin g x , confirm usin g u ) Delete directory The "Delete Directory" menu it[...]

Input function 22 KAP08B.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Input function The input function is activated when names or call num- bers are entered or edited, e.g. new entries in the direc- tor y. The input field The lines in the input field are divided for entries or edits as follows : ● Line 1 for "n ame " (16 c[...]

Input function 23 KAP08B.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Example of a new directory entry Select "New entry" in the directory menu to obtain the fol- lowing output on the display : Detailed instructions on making an entry can be found in the chapter " E ntering letters, special characters, and dig- its"[...]

Input function 24 KAP08B.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Example of field boundaries I f 16 characters have already been entered in the "name" field and 32 characters have already been entered in the "content" field and you enter another characte r , the last character in each field will be moved to the[...]

Input function 25 KAP08B.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Default setting = lower case Shift to upper case by pressing "*" Content input field An additional menu is provided for entering special characters in the " content " field . This is indicated in the descriptions of corresponding functions . key 1[...]

Base station settings 26 KAP09.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Base station settings Y ou can program your Gigaset 2 01 1 T ango to suit your own individual requirements. The settings are made from a registered handset. Service function Base station settings are introduced using the "Service" menu function. ( t m[...]

Base station settings 27 KAP09.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Setting the base station ringer tone It is possible to define the tone used to signal calls at the base station. Y ou can choose from a range of six tones. The factory default is level 1 . ( t means: browse usin g x , confirm usin g u ) To set the ringer tone, [...]

Handset settings 28 KAP10.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Handset settings Y ou can program your handset to suit your own individual requirements. All settings are made directly on the hand- set. Setting the handset volume The handset has three volume settings: The factory default is level 1 (normal). ( t means: browse usi[...]

Handset settings 29 KAP10.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Ringer settings Y ou can set the ringer on your handset to suit your individ- ual requirements. ( t means: browse usin g x , confirm usin g u ) The options are changed the same way: Activating/deactivating the call duration display In the case of external calls ( ?[...]

Handset settings 30 KAP10.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Selecting a language Y ou can chose one of the following seven languages for the messages on your display: German, English, French, Italian, Spanish, Portuguese, Dutch. ( t means: browse usin g x , confirm usin g u ) Activating/deactivating automatic backlight If th[...]

Handset settings 31 KAP10.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Activating/deactivating notification and warning tones It is possible to switch the following notification tones on and off: ● Key confirmation ● Battery warning ● Range warning ● Positive confirmation ● Error beep ● In range beep ( t means: browse usin [...]

Handset settings 32 KAP10.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Baby alarm A registered handset can also be used as a baby alarm. If this function is switched on, an internal call is made to a second handset if noise above a specified volume is de- tected. The call lasts approximately one minute and then the baby alarm switches [...]

The Gigaset 2011 Tango lock functions 33 KAP13.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 The Gigaset 2 01 1 T ango lock functions Activating/deactivating the Gigaset 2 01 1 T ango lock for outgoing calls It is possible to lock the Gigaset 2 01 1 T ango for outgoing calls. If emergency numbers are stored, they can be dialed even if t[...]

The Gigaset 2011 Tango lock functions 34 KAP13.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Displaying and storing emergency numbers ( t means: brows e x , confir m u ) Deleting all emergency numbers ( t means: browse x , confir m u ) Z OK . t Service Call up the "Service" menu item. # 2% Start the setting procedure. o u Ente[...]

The Gigaset 2011 Tango lock functions 35 KAP13.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Barred numbers for handsets By storing barred numbers for each registered handset, you can prevent certain external call numbers or types of number from being dialed if the call number lock is acti- vated ( ➔ page 37). Thus, for example, you c[...]

The Gigaset 2011 Tango lock functions 36 KAP13.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Deleting all barred numbers ( t means browse usin g x , confirm usin g u ) u Display the next barred numbe r . or o Enter a barred number for the displayed memory slot (1 to 3). If a barred number is already stored, the new number overwrites the[...]

The Gigaset 2011 Tango lock functions 37 KAP13.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Activating/deactivating the call number lock Y ou can activate and deactivate the call number lock sep- arately for each registered handset. Other handsets are not affected by the lock. Calls can still be accepted on the handset even if the call[...]

The Gigaset 2011 Tango lock functions 38 KAP13.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Setting trunk access for the handsets Y ou can define for each registered handset whether exter- nal calls can be made from it or not. A distinction is made between: ● Unrestricted trunk access (factory default) – exter- nal calls allowed, a[...]

Lock functions on the handset 39 KAP14.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B306-2-7619 Lock functions on the handset It is possible to lock both the entire Gigaset 2 01 1 T ango telephone and individual handsets against unauthorized use . Depending on the type of lock you select, DSS or emergency numbers can still be called from the hands[...]

Lock functions on the handset 40 KAP14.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B306-2-7619 Display or store a DSS number ( t means: browse usin g x , confirm usin g u ) Deleting a DSS number ( t means: browse usin g x , confirm usin g u ) Save the change you have made . Dialing a DSS number Z OK . t Handset Lock t DSS Number When you select t[...]

Lock functions on the handset 41 KAP14.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B306-2-7619 Handset display with active lock Display with locked handset Display with system lock Display with call number lock Display with outward-restricted trunk access or internal access The handset lock is switched on and there is no DSS number stored. U Hand[...]

Short cuts 42 KAP14A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Short cuts Descriptions with example A short cut is a short command which can involve one or more commands . A series of commands involving, for ex- ample, the storing of a call number as directory entry can be stored as a short cut . A short cut consists of " Func-[...]

Short cuts 43 KAP14A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 New entry To create a short cut, call up the short cut function in the main menu . If no short cut has previously been created, the "Shortcut List" will contain a broken line. Y ou can cre- ate a new short cut using the "New Entry" option in the "[...]

Short cuts 44 KAP14A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 The numerical values and the *, # symbols are entered di- rectly on the keypad . Displaying a function To find out the meaning of a special characte r , set the en- try mark on the character and call up the "Display Func- tion" menu item . An explanatory text i[...]

Short cuts 45 KAP14A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Editing an entry Y ou can edit any entry in the short cuts list at any time . ( t means: browse usin g x , confirm usin g u ) The entry function is active. Proceed as with "New Entry" . Deleting an entry Y ou can also delete short cuts from the list . ( t means[...]

Short cuts 46 KAP14A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Deleting all entries Y ou can delete all entries in the short cuts list . ( t means: browse usin g x , confirm usin g u ) Available Memory Y ou can display the percentage of memory available for further entries using this function . ( t means: browse usin g x , confirm u[...]

Short cuts 47 KAP14A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Default short cuts A list of "Default short cuts" is already loaded in your short cuts list . The list contains the following short cuts : Restoring default short cuts If one or more default short cuts have been deleted or changed, they can be reloaded . Proced[...]

Operating more than one handset 48 KAP15.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Operating more than one handset Registering/de-registering more than one handsets at the base station Y ou can operate up to six handsets from the Gigaset 2000 T ango family at a Gigaset 2 01 1 T ango base station. The handset supplied with your telep[...]

Operating more than one handset 49 KAP15.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 De-registering a handset from a base station ( t means: browse usin g x , confirm usin g u ) Ring priority for incoming calls It is possible to set how incoming calls should be signaled when operating several handsets. A distinction is made between: ?[...]

Operating more than one handset 50 KAP15.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Excluding or reintegrating a handset from/into collective ringing ( t means: browse usin g x , confirm usin g u ) Selecting a handset for ring priority ( t means: browse usin g x , confirm usin g u ) Z OK . t Service Call up the "Service" me[...]

Operating more than one handset 51 KAP15.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Setting the number of rings for ring priority ( t means: browse usin g x , confirm usin g u ) Z OK . t Service Call up the "Service" menu item. # 1 Start the setting procedure. o Enter the fou r -digit base code (factory default: "0000&[...]

Operating in a telephone system 52 KAP16.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Operating in a telephone system To be able to operate your Gigaset 2 01 1 T ango in a tele- phone system, you must first 1 . switch off the "Automatic Attenuation" function, 2. check the signaling method, 3. enter the analog trunk or MSI, 4.[...]

Operating in a telephone system 53 KAP16.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Setting the flash time in dual-tone multifrequency signaling (DTMF) ( t means: browse using x , confirm usin g u ) Analog trunks For through connection to the public telephone network you must set: ● the analog trunk ● the pause length after the a[...]

Operating in a telephone system 54 KAP16.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Entering the analog trunk and the MSI The analog trunk and MSI have one to three characters and can comprise the digits @ to 6 and the : , # , and R keys. ( t means: scroll using x , accept usin g u ) Modify the pause length according to the analog tr[...]

Operation at more than one base station 55 KAP17.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Operation at more than one base station Y ou can register and operate your handset at up to 6 Gi- gaset T ango base stations. This offers the following advantages: ● Y ou can operate the same handset at base stations in different locations ([...]

Operation at more than one base station 56 KAP17.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Setting the preferred station We recommend that you define a preferred base station if the handset is located in an overlap area between two or more base station radio areas. There are two ways of setting the preferred station: ● you can spe[...]

Operation at more than one base station 57 KAP17.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Base station names Y ou can change the preset base station names (" Bas e 1", " Base 2" ... "Base 6"). In a compan y , one station can be called "Purchasing", for example, and another "Stock". [...]

Code numbers and factory defaults 58 KAP17A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Code numbers and factory defaults Changing the system code, changing the PIN To protect your personal settings, Gigaset 2 01 1 T ango has a fou r -digit system code and an eight-digit handset PIN (personal identification number). The factory defaul[...]

Code numbers and factory defaults 59 KAP17A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Changing the handset PIN Changing the PIN prevents unauthorized persons from, for example, deleting entries from your telephone book. ( t means: browse using x , confirm usin g u ) Resetting the base station to factory defaults Y ou can use this pr[...]

Code numbers and factory defaults 60 KAP17A.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Resetting the Gigaset 2000C T ango handset to factory defaults Y ou can use this procedure to reset the following settings to factory defaults: ( t means: browse usin g x , confirm using u ) ● DSS numbe r , redial, Baby Alarm, Deleted ● Auto T [...]

Notes on operation 61 KAP18.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Notes on operation Installing the base station Installation site/installation area ● A power socket must be located at the installation site. ● In order to avoid interference, the base station should not be in the direct vicinity of other electronic equip- men[...]

Notes on operation 62 KAP18.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Using rechargeable batteries The following should be noted when using rechargeable batteries: ● Only use the rechargeable battery types supplied (AA nickel-cadmium batteries). When replacing recharge- able batteries, the following can be used: Saft RC6, Panasoni[...]

Notes on operation 63 KAP18.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 ● New batteries do not usually reach their full capacity until they have been in normal use for several days. Al- though the battery LED indicates that the handset ’s batteries have been charged (LED off), you must as- sume during this initial phase that the c[...]

Notes on operation 64 KAP18.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 T echnical data Standard: DEC T , GAP Number of channels: 120 duplex channels Radio frequency range: 1910 MHz to 1930 MHz Duplex method: Time-division multiplexing, 10 ms frame length Channel grid: 1728 kHz Bit rate: 11 52 kbit/s Modulation: GFSK Voice coding: 32 [...]

Notes on operation 65 KAP18.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Connecting the telephone socket Only use a Siemens telephone connecting cable. Cables by other manufacturers may have a different pin assign- ment. The telephone cable socket is connected on the under- side of the base station as follows: Maintenance notes Simply [...]

Notes on operation 66 KAP18.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Procedure in the case of malfunctions Not every malfunction means that there is an actual de- fect in your telephone. In some situations you may save time and money if you can eliminate the cause of simple faults yourself. The information below will help you do th[...]

Notes on operation 67 KAP18.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Overview: signal tones tuuuuut tuuuut tuuuut tuuuut tut tut tut tut tut tuuuut tut tuuut tuuuuut tuuut tuuut 0.8 s tone 0.8 s pause Recall: 3 x 0.2 s tone repetition following 0.8 s pause Internal dial tone: 0.5 s tone 0.5 s pause Internal busy tone 0.5 s tone 30 [...]

Quick reference guide handset Gigaset 2000C Tango 68 KAP19.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Quick reference guide handset Gigaset 2000C T ango Switch handset to ON/OFF/PROTECTED: h Accepting a call: Call rings: remove the handset from the charging unit or press the off-hook key c (it is possible to set the auto- matic call [...]

69 KAP19.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Notes:[...]

Index 70 GIG2011T.SIX 23.04.1998 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 A Activating, macro .......................................... 46 Additional menu, calling up ............................. 4 Alphanumeric keypad .................................... 24 Analog trunk .................................................. 54 Automatic backligh[...]

Index 71 GIG2011T.SIX 23.04.1998 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 E Emergency numbers deleting ................................................... 34 details ..................................................... 33 displaying ................................................ 34 saving ....................................................[...]

Index 72 GIG2011T.SIX 23.04.1998 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 N New entry, directory ..................................... 19 Notes for users who wear hearing aids ............ 61 rechargeable batteries ............................ 62 O Operation at more than one base station ..... 55 Outgoing calls, external ......................[...]

KAP20.FM5 18.7.99 Gigaset 2011 T ango: A30852-X1106-B307-2-7619 Issued by Private Communications Systems Group Hofmannstraße 5 1 , D-81359 Munich © Siemens AG 1998. All rights reserved. Subject to availability. Right of modification reserved. Siemens Aktiengesellschaft Order No.: A30852-X 11 06-B307-2-7619 Printed in Germany 4/98 U6[...]