SIIG 133 инструкция обслуживания

UltraA T A 133/100 Pro TM User ’ s Manual TM SIIG’ s ONLINE SUPPORT and Product Registration Visit SIIG’s web site at www.siig.com and click SUPPORT/DRIVERS for instant technical support. Also, click REGISTRATION FORM to register your product[...]

Please complete and mail. This card will ensure that your warranty is properly documented in our database. Complete Product Name:________________________________________________________________ Name:___________________________________________ E-Mail: _____________________________ Address:_____________________________________________________________[...]

Comments: ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ___________________________________________ ________________________________[...]

PRODUCT NAME MODEL NUMBER UltraA T A 133/100 Pro CN2490 FCC RULES: TESTED T O COMPL Y WITH FCC P AR T 15, CLASS B OPERA TING ENVIRONMENT : FOR HOME OR OFFICE USE FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and [...]

User's Manual iv Contents Chapter 1: Introduction 1-1 Unpacking the UltraA T A 133/100 Pr o ......................... 1-1 1-1.1 Static Electricity Precaution .............................. 1-2 1-1.2 Record the Serial Number ................................. 1-2 1-2 Introducing the UltraA T A 133/100 Pro ........................ 1-3 1-2.1 Key F[...]

Contents v About This Manual The purpose of this manual is to introduce you to your UltraA T A 133/100 Pro . It will guide you on how to install the car d and software for pr oper operation in your computer . Please save this manual for future r eference in the event you wish to connect other devices to your system. This manual is comprised of the [...]

User's Manual vi[...]

Introduction 1-1 Thank you for your pur chase of the UltraA T A 133/100 Pro . SIIG’s goal is to provide its customers with r eliable, high quality products and customer support. The purpose of this comprehensive user ’s manual is to: • introduce you to your UltraA T A 133/100 Pr o features and benefits • guide you through the steps for an e[...]

1-2 User's Manual 1-1.1 Static Electricity Precaution One of the r outine pr ecautions you must be aware of when working with computer components is the problem of static electricity discharge. Note Leave the pr oduct in its static-resistant bag until you are r eady to install it. Caution Static electricity dischar ge may per - manently damage[...]

Introduction 1-3 1-2 Introducing the UltraA T A 133/100 Pro The UltraA T A 133/100 Pro is an ultra high-speed dual channel Ultra A T A/133 controller boar d for use with Power Macs. It achieves burst data transfer rates up to 133MB/sec and supports drive capacities gr eater than 137GB. And it also pr ovides full backward support for Ultra A T A 100[...]

1-4 User's Manual 1 1 Figure 1-1. UltraA T A 133/100 Pro Board Layout Ultra A T A 133/100 Connectors 1-2.3 Board Layout IDE2 IDE1 Ultra A T A/133/100 Chipset[...]

Installation 2-1 Chapter 2 Installation This chapter will guide you through the installation of the UltraATA 133/100 Pro into your computer. 2-1 Hardware Installation General instructions for installing the card are provided below. If needed, please refer to your computer’s reference manual for more information. Caution: Static Electricity Discha[...]

User's Manual 2-2 Note: Hold the board by its external edges only. Try to avoid touching the components, connectors or pins. 2-2 Device Connection The UltraATA 133/100 Pro is a dual channel Ultra ATA/133 controller that supports up to four IDE hard disk drives or CD-R/ RW drive. If you plan to use the second IDE channel (IDE2) , you will need [...]

Installation 2-3 2. Attach one connector on the long end of the Ultra ATA ribbon cable to the board's IDE connector and the other connector(s) to your hard disk drive(s). Make sure pin 1 on the cable (indicated by the colored stripe) matches pin 1 on the board's IDE connector and your hard disk drive(s). 3. When two hard disk drives are i[...]

User's Manual 2-4 2-3 Software Installation This section provides information on how to install the UltraATA 133/100 Pro driver in your Power Mac. Please refer to the Mac OS manual to familiarize yourself with Drive Setup and OS Installation routines. 2-3.1 Driver Installation for Mac OS 8.6 For a fresh OS 8.6 installation: 1. Install the Ultr[...]

Installation 2-5 2-3.2 Driver Installation for Mac OS 9.x For a fresh OS 9.x installation: 1. Install the UltraATA 133/100 Pro and attached drives. 2. Boot up your computer with the Mac OS 9.x CD-ROM. Press and hold letter C on the keyboard while your system is booting to boot from CD-ROM. 3. When Mac OS finishes booting, double click Utilities fol[...]

User's Manual 2-6 2-3.3 Driver Installation for Mac OS X For a fresh OS X installation: 1. Install the UltraATA 133/100 Pro and attached drives. 2. Boot up your computer with the Mac OS X CD-ROM. Press and hold letter C on the keyboard while your system is booting to boot from CD-ROM. 3. When Mac OS finishes booting, click Install in the menu [...]

Installation 2-7 2-4 Verifying Installation After you succesfully initialize the hard drive, new Untitled drive(s) icon will appear on the desktop. Please check Apple System Profiler for successful installation. 2-4.1 Verify Mac OS 8.6/9.x Installation 1. Click Apple logo located on the upper left corner of the desktop. 2. Click Apple System Profil[...]

User's Manual 2-8[...]

3-1 Technical Support & Product Return 3-1 Overview This chapter will give you instructions on how to obtain product information, contact technical support and return defective product. This user's manual is written with easy-to-understand instructions on how to configure and install this product in your system. We encourage you to consult[...]

3-2 User's Manual 3-3 Technical Support QUESTIONS? SIIG’s Online Support has the answers! Simply visit our web site at www.siig.com and click on the SUPPORT link. Our online support database is updated daily with new drivers and solutions. The answers to your problems could be just a few clicks away. 3-4 Return Merchandise Authorization (RMA[...]

3-3 Technical Support & Product Return Step 2: Complete the RMA form • Fill out your Return Merchandise Authorization (RMA) form, and include it in the package with the product. • Properly pack the product for shipping. All software, cable(s) and other accessories that came with the original package must be included . • Clearly write your[...]

3-4 User's Manual[...]

RETURN MERCHANDISE AUTHORIZA TION (RMA) FORM RMA Number: _____________________________________ Date:__________________________________ Name:___________________________________________________________________________________ Company:_________________________________________________________________________________ Address:____________________________[...]

02-0250E[...]

03-0311A[...]