Simplicity Turbo Turbo Wide Body Cart & Hitch инструкция обслуживания

A TT ACHMENT OPERA T OR’S MANUAL Mfg. No. Description 1691526 Turbo Wide Body Cart & Hitch (for SunStar / 1900 / 2900 Series & Sovereign / 900 / 2800 Series) 1692526 Turbo Wide Body Cart & Hitch (for Landlord / 1700 / 2700 Series & Broadmoor / 1600 / 2600 Series) 1714467-01 Rev 11/97 TP 100-2126-01-AT-SMA T urbo W ide Body Cart &a[...]

MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.[...]

T ABLE OF CONTENTS SPECIFICATIONS ........................................................1 ILLUSTRATIONS & PART LISTS ................................2 Wide Body Dump Cart .......................................................2 Tube Assembly (SunStar & Sovereign) .............................3 SunStar Hitch................................[...]

Figure 1. Wide Body Dump Cart 2 Illustrations & Part Lists No. Qty. Description 1 1 COVER 2 1 ROD, Straight 3 2 CLIP, Safety, Hairpin 4 1 SLEEVE, Plastic, Connecting 5 1 CLAMP, Sleeve 6 1 TUBE, Support 7 2 HANDLE, Lift 8 4 LOCKWASHER, 1/4 9 4 NUT, Hex, 1/4-20 10 4 NUT, Lock, 5/16-18 11 6 WASHER, Flat, 5/16 (1691367 & 1691358) 6 WASHER, Flat[...]

3 Illustrations & Part Lists Figure 3. Sunstar Hitch No. Qty. Description 1 4 Capscrew, Hex Hd., 7/16-14 x 1-1/2 2 4 Lockwasher, 7/16 3 4 Nut, Hex, Full, 7/16 4 2 Nut, Hex, Full, 1/2-13 5 2 Lockwasher, 1/2 6 1 Bracket, Hitch (Frame) 7 2 Nut, Hex, Full, 5/8 8 2 Lockwasher, 5/8 9 2 Bracket, Hitch (Cart) 10 2 Capscrew, Hex Hd.,5/8-11 x 1-1/4 11 2 [...]

Figure 6. Hitch Assembly - Landlord A. Hitch Bracket B. Hitch Support C. Capscrew, 3/8-16 x 1 D. Locknut, 3/8-16 E. Backside Drawbar F. Flat washer, 1/2 G. Capscrew, 1/2-13 x 1-1/4 H. Locknut, 1/2-13 4 Illustrations & Part Lists Figure 5. Tube Assembly - Landlord & Broadmoor No. Qty. Description 1 1 Clip, Spring 2 1 Lower Tube Assy. 3 1 Mid[...]

5 Safety Rules SAFETY RULES 1. Know the tractor controls and how to stop quickly. READ THE TRACTOR'S OWNER'S MANUAL. 2. Shut the engine off before attaching, adjusting, or dis- connecting the Collection System. 3. Check the cart to make sure it is attached tightly to tractor. 4. Check the latch handle to make sure it is engaged so the car[...]

6 Cart Assembly CART ASSEMBL Y 1. Install the wheel assemblies (A, Figure 8) to the frame (B). Place the head of the swivel wheel on the end of the frame. Align the holes and place four 3/8- 16 x 1 hex bolts up through the frame and head of the swivel. Secure with four flat washers (13/32 I.D., 7/8 O.D.) and 3/8-16 locknuts. 2. Install the U-bracke[...]

7 Cover Assembly 5. Install support tube (A, Figure 12) inside the box. Align each end of the support tube with the two holes at the front corner side of the box. Place one 5/16-18 x 1-1/2 hex bolt with a 5/16 flat washer and plastic spacer through the top, outside hole of the box and the support tube. Secure with a 5/16 locknut on the inside. At t[...]

8 Cover Assembly 6. Install the sleeve clamp (C, Figure 17) to the connect- ing sleeve (A) with 1/4-20 x 1/2 slotted truss head screw (D) and nyloc nut (E). Install the connecting sleeve inside the collar of the cover and position sleeve clamp (C) over the support tube (B). 7. Thread the straight rod (A, Figure 18), which has an eyelet on each end,[...]

9 Hitch Installation Figure 22. Sunstar Hitch Installation A. U-Bracket D. Bracket B. Capscrew, 1/2-13 x 1-1/4 E. Large Hole C. Capscrew, 7/16-14 x 1/2 F. Capscrew, 7/16-14 x 1/2 Figure 23. Sovereign Hitch Installation A. Locknut, 1/2-13 F. Support Bracket B. U-Bracket G.Capscrew, Hex, 1/2-13x1-1/2 C. Washer, Flat H.Spacer D. Safety Clip I. Spring [...]

10 Hitch Installation Figure 26. Discharge Tube Installation A. Upper Tube B. Middle Tube C. Lower Tube D. Spring Clip E. Truss Head Screw, 10/32 x 1/2 F. Washer G. Locknut, 10/32 H. Carriage Bolt, 1/4-20, 5/8 I. Flange Locknut, 1/4-20 Broadmoor/1600 Series (Mfg. No. 1692526) 1. Assemble the hitch bracket (A, Figure 25) to the hitch adapters left ([...]

11 Discharge T ube Installation DISCHARGE TUBE INST ALLA TION Landlord/1700 Series (Mfg. No. 1692526) Broadmoor/1600 Series (Mfg. No. 1692526) 1. Install the spring clip (D, Figure 26) with two 10/32 x 1/2 truss head screws (E), four flat washers (F), and two locknuts (G). 2. Install 1/4-20 x 5/8 carriage bolt (H) through hole in turbo housing. Sec[...]

12 Connecting Cart / Maintenance Figure 28. Connecting Cart To Tractor A. Cart Frame C. Spring Clip B. Clevis Pin CONNECTING CART T O TRACT OR Place the cart frame (A, Figure 28) onto tractor brackets and install the clevis pins (B) and springs clips (C). MAINTENANCE Cleaning Clear T ube To clean the clear mid-tube on the SunStar and Sovereign seri[...]

13 Operation Figure 30. Emptying the Cart CAUTION The maximum weight capacity of the cart is 400 lbs. Do not exceed. OPERA TION Before Operation Clear the lawn of all sticks, stones, wire and other debris which may be caught or thrown by the mower blades. Clean the tube with mild detergent (other products may damage tube). The flow of grass can be [...]

14 Operation Operating Without Collection System 1. Unhook the cart from the tractor by removing two cle- vis pins and spring clips (Figure 28). 2. To remove the blower, remove the belt from the pul- ley (A, Figure 31). 3. Close cover (D) and tighten knob. 4. Loosen wing nut (B) and, while holding deflector (C) up, pull blower off mover. 5. Allow d[...]

T orque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.6 10[...]

16 Notes[...]