Sony KP-51DS2U инструкция обслуживания

R 4-205-772- 13 (1) Instruction Manual KP-51DS1U KP-51DS2U ©2002 by Sony Corporation GB Digital Projection TV[...]

2 NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e. marked with 2 or @ ) must be used. When an alternative type of plug is used it should be fitted[...]

3 GB p Introduction Thank you for choosing this Sony Projection TV. Before operating the projection TV, please read this manual thoroughly and retain it for future reference. • Symbols used in the manual: • Important information. • Information on a feature. • 1,2... Sequence of instructions. • Shaded buttons on the remote control show the[...]

4 Safety Information Do not open the cabinet and the rear cover of the TV . Refer to qualified service personnel only . To prevent fire or shock hazard, do not expose the TV to rain or moisture. For your own safety , do not touch any part of the TV , power lead or aerial lead during lightning storms. Do not cover the ventilation openings of the T[...]

5 GB One Remote Control (RM-892) Overview of Projection TV Buttons (conectores lado izquierdo) (conectores lado derecho) Checking the Accessories Supplied Overview Two batteries (R6 type) On / Off Switch Standby indicator Volume control buttons Selecting input source S Video Input jack Video Input jack Audio Input jacks Auto Convergence button Head[...]

6 S RM 892 PROGR MENU 1 4 7 2 5 8 0 3 6 9 K VI DEO TV VI DEO TV VTR 1 2 3 4 DVD CH S RM 892 PROGR MENU 1 4 7 2 5 8 0 3 6 9 K VI DEO TV VI DEO TV VTR 1 2 3 4 DVD CH Getting Started - Overview Overview of Remote Control Buttons This button does not work on this set. Muting the Sound Press to mute TV sound. Press again to restore the sound. VCR on/off[...]

7 GB Installation Make sure you insert the batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. Inserting Batteries into the Remote Control Connecting cables are not supplied. Connecting the Aerial and VCR The Scart lead is optional. If you use this optional connection it can improve[...]

8 First Time Operation The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to 1) choose the language of the menu screen, 2) search and stores all available channels (TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change the language m[...]

9 GB First Time Operation 5 After all available channels are captured and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. a) If you do not wish to change the channel order, go to step 6. b) If you wish to change the channel order: 1 Push the joystick[...]

10 Auto converge the Red, Green, and Blue Lines 1 Press on the mark , on the front of the projection TV to reveal the front connectors. 2 Press button on the projection TV. The Auto Convergence function works for about 30 seconds. When the white cross disappears from the screen, your projection TV is ready for use. Notes: The Auto Convergence funct[...]

11 GB Menu System Menu System Although the picture is adjusted at the factory, you can modify it to suit your own taste. Adjusting the Picture 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to z to enter the PICTURE CONTROL menu. 3 Push the joystick to $ or 4 to select the item you wish to chang[...]

12 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to z button to enter the PICTURE CONTROL menu. 3 Push the joystick to $ to select Format , then push to z . 4 Push the joystick to $ or 4 to select Format, Scroll or Auto 16:9 . 5 Format Push the joystick to z to enter to the menu, then push to Z[...]

13 GB Menu System Menu System Although the sound is adjusted at the factory, you can modify it to suit your own taste. Adjusting the Sound 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to $ to select the symbol, then push to z to enter to the SOUND CONTROL menu. 3 Push the joystick to $ or 4 to[...]

14 4 Push the joystick to Z or z to alter the selected item, then press the OK button to store the new adjustment. 5 Repeat steps 3 and 4 to Salter the other items. 6 Press the MENU button to exit and return to the normal TV screen. Changing Sound Mode Quickly You can quickly change Sound mode without entering the Sound Control menu screen. 1 Press[...]

15 GB Menu System Menu System You can select a time period for the TV to switch itself automatically into the standby mode. Using the Sleep Timer 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to $ button to select the t symbol, then push to z to enter to the TIMER menu. 3 Push the joystick to z[...]

16 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to $ to select the symbol, then push to z to enter to the PRESET menu. 3 Push the joystick to $ or 4 to select Manual Programme Preset , then push to z . 4 Push the joystick to $ or 4 to select on which programme number you want to preset a chann[...]

17 GB Menu System Menu System With this feature you can: a) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV (only available on analogue channels) to obtain a better picture reception if the picture is distorted or b) preset the AV3 output for the programme positions of channels with scrambled si[...]

18 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to $ to select the symbol, then push to z to enter to the PRESET menu. 3 Push the joystick to $ or 4 to select Parental Lock , then push to z . 4 Push the joystick to $ or 4 to select the programme number with the channel you wish to block, then [...]

19 GB Menu System Menu System You can programme this projection TV to skip any unwanted programme numbers when they are selected with the PROGR +/- buttons. To cancel this function afterwards, proceed in the same way as described below by selecting the appropriate TV system (I or DIG) instead of "- - -" in step 5. Skipping Programme posit[...]

20 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to $ to select the symbol, then push to z to enter to the PRESET menu. 3 Push the joystick to $ or 4 to select Manual Programme Preset , then push to z . 4 Push the joystick to $ or 4 to select the programme number with the analogue channel you w[...]

21 GB Menu System Menu System With this feature you can view subtitles (if available) on the TV screen when watching digital channels. When watching analogue channels you can view subtitles via teletext. Displaying subtitles for digital channels 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to [...]

22 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to $ to select the symbol, then push to z button to enter to the VIDEO CONNECTION menu screen. 3 Push the joystick to $ or 4 button to highlight: TV Screen (input source for the TV screen) or Output (output source available for : 2 and : 3 Euro A[...]

23 GB Menu System Menu System This function enables you to designate a name to the optional equipment you have connected to the sockets of this projection TV. This name can be up to 5 characters (letters or numbers). Labelling of Input Sources 1 Press the MENU button on the remote control to display the menu on the screen. 2 Push the joystick to $ [...]

24 Displaying the EPG 1 Press the button on the remote control to display the electronic programme guide (EPG) on the screen. You may see the message "EPG INFORMATION IS TEMPORARILY UNAVAILABLE" whilst waiting for the EPG to appear on screen. 2 Push the joystick to $ , 4 , Z or z to move the on-screen cursor around the guide. 3 Press the [...]

25 GB Electronic Programme Guide (EPG) Electronic Programme Guide (EPG) Recording Programmes using EPG 1 Press the button on the remote control to display the programme guide on the screen. 2 Push the joystick to Z or z to highlight the programme column, then push to $ or 4 to select your desired programme. 3 Press the OK button. If the programme i[...]

26 1 Press the button on the remote control to display the EPG on the screen. 2 Push the joystick to Z or z to highlight the programme type column, then push to $ to select the timer symbol . 3 Press the OK button to display a screen of 9 programme slots, each one indicating that it is either free for programming, or that it has a programme already[...]

27 GB Teletext Teletext Teletext is an information service transmitted by most TV stations. Make sure to use a TV channel with a strong signal, otherwise teletext errors may occur. Viewing Standard Teletext (analogue channels only) Selecting Teletext 1 Select the TV channel which carries the teletext service you wish to view. 2 Press the button on [...]

28 Teletext Most of the digital TV channels broadcast information via text. This digital service includes high quality text and graphics as well as advanced navigational options. Additionally, this projection TV has access to a dedicated digital text channel. Viewing Digital Text Selecting the dedicated digital text channel 1 To view the dedicated [...]

29 GB 1 Press the button on the remote control to display the info menu on screen. This display gives a brief description about the programme currently being transmitted. When you wish to exit the info menu press the button again. 2 To obtain a description of what is on next, push the joystick to z to highlight NEXT . 3 Should you wish to record th[...]

30 Optional Connections Acceptable input signal A Centre speaker input Set “Speaker” on the SOUND CONTROL menu to “Centre in”. B No inputs C Audio/video and RGB signal D Audio/video and S video signal E Audio/video signal F S Video signal G Video signal H Audio signal I No input Available output signal No outputs Audio signal Video/audio fr[...]

31 GB Additional Information when connecting equipment Connecting a VCR We recommend you connect your VCR to the D or E socket using a scart lead. If you do not have a scart lead, use the “Manually Tuning the TV” section of this instruction manual to tune in the VCR signal to TV programme number “0”. Also refer to your VCR instruction manua[...]

32 Optional Connections Optional Connections Smartlink is a direct link between your projection TV set and a VCR. For Smartlink you need: •A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic. Megalogic is a trademark of Grundig Corporation. EasyLink is a trademark of Philips Corporation. •A fully-wired 21 pin SCART cable to co[...]

33 GB Additional Information Additional Information For the best picture quality, try to position the projection TV so that you can view the screen from within the areas shown below. Optimum Viewing Area Horizontal viewing area (Optimum viewing position) Vertical viewing area (Optimum viewing position) 60º 20º 20º 60º 1.9 m (Minimum optimum dis[...]

34 Additional Information Additional Information Specifications TV system I Colour system PAL NTSC 3.58, 4.43 (only Video In) Channel coverage UHF: B21-B69 Projected picture size 51 inches Approx. 130 cm measured diagonally Rear Terminals • Centre speaker input terminals (2 terminals) • (L,R) audio outputs (phono jacks) • : 1/ 21-pin Euro con[...]

35 GB Problem No picture (screen is dark), no sound No picture on any channel after digital tuning. Poor or no picture (screen is dark), but good sound Poor picture quality when watching a RGB video source. Good picture, no sound No colour on colour programmes Distorted picture when changing programmes or selecting teletext Noisy picture when viewi[...]

MAIN TRANSMITTERS BBC1 BBC2 ITV CH4 CH5 London & South East 1 Bluebell Hill 40 46 43 65 - 2 Crystal Palace 26 33 23 30 - 3 Dover 50 56 66 53 - 4 Heathfield 49 52 64 67 - 5 Oxford 57 63 60 53 49 South-West 6 Beacon Hill 57 63 60 53 - 7 Caradon Hill 22 28 25 32 - 8 Huntshaw Cross 55 62 59 65 67 9 Redruth 51 44 41 47 37 10 Stockland Hill 33 26 23 [...]