Sony KV-TG21M90 инструкция обслуживания

T rini tr on C o l or T V Operating Instructions • Before operating the unit, please r ead this manual thoroughly and retain it for futur e refer ence. KV -TG21 KV -PG14 © 2001 Sony Corporation 4-084-117- 13 (1) M90 M72 GB[...]

A Getting Started Plug in the power cord, then press ! on the TV to turn it on. Press SELECT and PROGR + on the TV at the same time for one to two seconds to preset the channels automatically . (See J ) Tip • T o stop the automatic channel presetting, press SELECT . Press SELECT on the remote until “LANGUAGE/ : ENGLISH” appears on the screen,[...]

B W ARNING • Dangerously high voltages ar e present inside the TV . • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow thr ough the antenna and other terminals to ground. • T o avoid battery leakage and damage to the [...]

Install the TV on a stable TV stand and floor which can support the TV set weight. Ensure that the TV stand surface is flat and its area is lar ger than the bottom area of the TV . Do not place any objects on the TV . C Securing the TV B KV -TG21 only T o prevent the TV fr om falling, use the supplied screws, clamps and band to secur e the TV . Scr[...]

! PROGR SELECT (MONO) L R L (MONO) R 8 6 1 3 4 7 9 2 5 0 qa qs ★ ★ D TV front and r ear panels TV front panel TV rear panel Button Function 1 ! T urn off or turn on the TV . 2 Remote control sensor . 3 1 Standby indicator . 3 Stereo/bilingual indicator . (KV -TG21M90 only) 3 Bilingual indicator . (KV -PG14M72 only) 3 W ake Up indicator . 4 PROG[...]

E Connecting optional components Connecting to the video input terminal ( t ) TV front panel Camcorder Audio/Video cable (not supplied) Note • Do not connect video equipment to t (video input) at the front and the r ear of your TV at the same time; otherwise the picture will not be displayed pr operly on the screen. TV rear panel Connecting to th[...]

F T roubleshooting If you find any problem while viewing your TV , please check the following guide. If any problem persists, contact your Sony dealer . Snowy picture, noisy sound Good picture, noisy sound No picture,no sound Good picture, no sound Dotted lines or stripes Double images or “ghosts” No color Abnormal color patches The 1 (standby)[...]

G Specifications Power requirements 220-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV T elevision system B/G, I, D/K, M Color system P AL, P AL 60, SECAM,NTSC3.58, NTSC4.43 Stereo/Bilingual system NICAM Stereo/Bilingual NICAM Bilingual B/G, I, D/K B/G, I , D/K ; A2 Stereo/ Bilingual B/G Channel coverage B/G VHF : E2 to E1[...]

H Remote control Button Function 1 ?/1 T urn off temporarily or turn on the TV . 2 a Display the TV program. 3 JUMP Jump to previous program number . 4 PROGR +/– Select program number . 5 2 +/– Adjust volume. 6 SELECT Select the desired item. 7 PIC MODE Select picture mode. 9 +/– Adjust items. 0 Display on-screen information. qa % Mute the so[...]

I Setting the timers Y ou can turn on and off your TV by using the and buttons respectively . Setting the W ake Up timer 1 Press until the desired period of time appears on the screen. The W ake Up timer starts immediately after you have set it. 2 Select the program number or video input you want to wake up to. 3 Press /1 , or set the Sleep timer [...]

J Presetting channels Y ou can automatically preset up to 100 TV channels in numerical sequence from pr ogram number 1, or manually preset desir ed channels and channels that cannot be preset automatically . Presetting channels automatically from a specified pr ogram number 1 Press SELECT until “AUTO PROGRAM” appears on the screen. 2 Press + or[...]

Presetting channels (continued) T o change the TV system setting If the picture or sound is abnormal when r eceiving programs through the 8 (antenna input) terminal (1) Press SELECT until “TV SYS” appears on the scr een. (2) Press + or – to select the appr opriate TV system until the picture or sound quality is optimal. B/G I D/K M T o change[...]

Adjusting the picture and sound settings 1 Press SELECT until the desired setting appears. Each time you press SELECT , the setting item will change as follows: 2 Press + or – to adjust the item. 3 T o adjust other items, repeat steps 1 to 2. Notes • “BASS”, “TREBLE” and “BALANCE” can be adjusted for KV -TG21M90 only . • “HUE”[...]

L Adjusting the pictur e position B KV -TG21M90 only If the pictur e is slanting, you can adjust the picture position using the “PIC ROT A TION” function until it is optimal. 1 Press SELECT repeatedly until “PIC ROT A TION” appears on the screen. 2 Press + or – to adjust the picture position. The + or icon on the screen flashes while adju[...]

A/B M Enjoying stereo or bilingual programs Y ou can enjoy stereo sound or bilingual pr ograms of NICAM and A2 stereo systems by using the A/B button. When r eceiving a NICAM program Broadcasting On-screen display (Selected sound) NICAM stereo (KV -TG21M90 only) NICAM bilingual NICAM monaural When receiving an A2 pr ogram B KV -TG21M90 only Broadca[...]