Sony RM-PP505L инструкция обслуживания

Remote Commander Operating Instructions 4-236-328- 11 (2) RM-PP505L Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. © 2001 Sony Corporation[...]

2 Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On operation Before connecting other components, be sure to turn off and unplug the receiver. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly mo[...]

3 Before you use your remote Check that you received the following item with the remote: R6 (size-AA) batteries (2) Inserting batteries into the remote Insert two R6 (size-AA) batteries with the + and – properly oriented in the battery compartment. When using the remote, point it at the remote sensor on the receiver. Tip Under normal conditions, [...]

4 This chapter provides information on the location of buttons and how to use them to perform basic operations. However, some functions explained in this section may not work depending on the model of the receiver. For the functions of the receiver you purchased, refer to the Operating Instructions supplied with the receiver. Parts description Loca[...]

5 Location of Parts and Basic Remote Operations 2 Remote mode buttons Press to select the mode of the remote (page 15). 3 MACRO 1, 2 buttons Press to use Macro Play function (page 14). 4 SOUND FIELD buttons A.F.D. button Press to set the receiver to automatically select the appropriate sound field for the input signal. This button can be used only [...]

6 Parts description (continued) qf AV ?/1 switch Press to turn the selected audio and video components under the function button, on or off. If you press the ?/1 switch at the same time, it will turn off the main component and other Sony audio/video components (SYSTEM STANDBY) . Note The function of the AV ?/1 switch changes automatically each time[...]

7 Location of Parts and Basic Remote Operations continued w; Cursor buttons ( U/u/I/i ), ENTER/ EXEC button After pressing the MAIN MENU, AV MENU, or TITLE/GUIDE button, use the cursor buttons to make specific settings, then press the ENTER/EXEC button to enter the selection. wa TITLE/GUIDE button* Press to display DVD titles or guide menus. ws AV [...]

8 Parts description (continued) wl Numeric buttons (1 to 0)* Press to select channel numbers. e; JUMP button Press to toggle between the previous and the current channels. ea POSITION button Press to change the position of the small picture**. es SWAP button Press to swap the small and large pictures**. ed P IN P button Press to activate the pictur[...]

9 Location of Parts and Basic Remote Operations T able of buttons that you can use to control each component Component CD DAT MD Tape LD VCR TV Satellite Video DVD player deck deck deck player tuner/ CD player (A and B) Cable box player Button(s) AV ? / 1 z zz zzzzz z Numeric buttons z zz z zzzzz z SHIFT >10 zz z z z z z nz VOL – z O (Return) [...]

10 This chapter describes how to change the factory setting of a function button and how to set the remote to control non-Sony components. Programming the remote You can program the remote to control non- Sony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system. Furtherm[...]

11 Advanced Remote Operations To control a DAT deck Maker Code(s) SONY 203 PIONEER 219 To control an MD deck Maker Code(s) SONY 301 DENON 302 JVC 303 KENWOOD 304 To control a tape deck Maker Code(s) SONY 201, 202 DENON 204, 205 KENWOOD 206, 207, 208, 209 NAKAMICHI 210 PANASONIC 216 PHILIPS 211, 212 PIONEER 213, 214 TECHNICS 215, 216 YAMAHA 217, 218[...]

12 To control a VCR Maker Code(s) SONY 701, 702, 703, 704, 705, 706 AIWA 710, 750, 757, 758 AKAI 707, 708, 709, 759 BLAUPUNKT 740 EMERSON 711, 712, 713, 714, 715, 716, 750 FISHER 717, 718, 719, 720 GENERAL ELECTRIC 721, 722, 730 GOLDSTAR 723, 753 GRUNDIG 724 HITACHI 722, 725, 729, 741 ITT/NOKIA 717 JVC 726, 727, 728, 736 MAGNAVOX 730, 731, 738 MITS[...]

13 Advanced Remote Operations Learning the commands of your components By using the Learning function, it is possible for this remote to perform learned commands. Setting remote control codes that are not stored in the remote When a remote control code is not one of the presets stored in the remote, it is possible for the remote to learn the code u[...]

14 To clear the memory of the remote To clear all programmed and learned signals, do the following to reset the remote to factory settings. Press ?/1 , AV ?/1 , and MASTER VOL – at the same time. The indicator lights 3 times, then goes off. To use a command that has been learned When selecting a learned function, press the learned button for that[...]

15 Advanced Remote Operations To cancel programming Press USE MODE during any step. The remote automatically exits the macro setting mode. To delay the output of an IR code Start over from step 1. In step 3, press VIDEO 1, then MACRO1 or MACRO2. This allows you to specify 1 second delay before output the next IR code. Be sure not to press MACRO1 or[...]

16 T roubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. The remote does not function. • Check the mode of the remote (page 15). • Point the remote at the remote sensor on the rece[...]