Sony SNCDS10 инструкция обслуживания

SNC-DM160 / DS60 / DM1 10 / DS10 / CM120 / CS20 Upgrade manual This manual explains how to upgrade the fi rmware of SNC-DM160 / DS60 / DM1 10 / DS10 / CM120 /CS20. Preparation: 1. Y ou need the following equipments. - A computer (W indows) - A powe r supply for the camera - A network cable ( and a hub if necessary) 2. Y ou need to store the Upgrade[...]

Procedure: * This manual is described that the IP address of the camera is set to 192.168.0.100 and 192.168.0.101. 1. Connect the camera to the computer ac cording to the supplied Installation manual. 2. T urn on the camera. T urn on the camera. When the camera is located on a remote network, you must reboot the camera by the reboot button on the I[...]

3. Execute the Upgrade tool 3.1.Double-click the SNC-x xxFirmwareUpgrade.exe Confirm if the model name and the Software version are proper . Read the precautions carefully , then press the Next> button. 3.2.Read the Software License Agreement carefu lly and accept the agreement to continue the upgrading. Then select the Agree and click the Next&[...]

3.3. Select the mode of the upgrade. Automatic mode The upgrade of plural camra is possible at the same time. Manual mode The upgrade of a camera is posible one by one. After select either mode, then click Next> burron. Explanation of ”Automatic mode”is sction3-4. Explanation of ”Manual mode” is section 3-1 1. 3.4. It shows the camera li[...]

3.5. Select the camera that dose the upgrade. Put the check in the checkbox of camera..Then next step is ”username/password” setting. If ”username/password” setting of all camera is same setting, click ” Select all ” button. If each camera has various settin g,, click ” Access setting ”button without to click ” Select all ”butto[...]

3.7. Input the Administrator ’ s name and password, inthe fields. Same words are saved to all selected cameras. Then click ” OK ”button. When you clicked ”Select all”button without to click ” Access setting”button, you can input the Administrator ’ s name and pasword to each camera. 3.8. The Administratoe’ s name are displayed in [...]

3.9. Confirm whether the camera that checked in section ”3.4 ” is displa yed. When you succeed the setting of the camera, select Retain the curren t settings. When you succeed and save the setting of the camera, select Backup the current se ttings. Then click ” Upgrad e ”button.The configuration file is saved as follows. The case of W indow[...]

3.10. The version up is in progress. Do not turn off the power of the camera. It takes about 20 minutes per a came ra to complete the version up. 3.1 1. Completion of the version up displays the following log screen. Confirm the result of the upgrade, then click the “Close” button to close the log screen. Finally , click “Finish” button to [...]

3.12. Input the camera's IP address , the Administrator's name and password in the fields, then click the Next> button. The default settings of Administra tor's name and password are "admin". 3.13. The old and new software version are displayed. Confirm it, then click Upgrad e button.[...]

3.14.. T o start version up, click the OK button. 3.15. The version up is in progress. Do not turn off the power of the camera. It takes about 20 minutes to complete the version up.[...]

3.16. Completion of the version up displays the foll owing screen. Confirm the version of the camera, then click the Finish button to finish the applica tion. 4. Confirm the images Enter the following URL in the URL box on the browser and confirm that the images are displayed. http://192.168.0.100/en/A V ie wer .html?code c=jpeg After the confirmat[...]

Appendix A.1. Add camera A.1.1. When you want to add other camera, click button, and then click 、 ”Add other cameras...” button. A.1.2. There is the 3 methods by how to add camera. • The method for setting IP address and HTTP port No. Explanation is sction A.1.3. • T h e m e t h o d f o r r e a d i n g C S V f i l e . E x p l a n a t i o [...]

A.1.3. The method for setting IP address and HTTP port No. Click “Add” button, this dialog is showe d Set the IP address and HTTP por t No., then click , , or .The camera can be registered temporally . If you click , or , you can succeed pre-register of camera. When you exit this dialog, click . A.1.4. The method for reading CSV file. When you [...]

A.1.5. The method for pastin g the data on clipboard. IP address, port no. [Return] [Example] 192.168.0.100,80 192.168.0.101,80 192.168.0.102,80[...]

A.2 Connecting test A.2. １ . When you confirm the connection, click and click “T esting...” button. A.2.2. When it is succeeded, the line is to be . But when not succeeded, it is to be . --------------------- ------------------- En d of file --------------------- ------------------------ ----[...]