Sound Performance Lab 9632 инструкция обслуживания

Manual Digital D ynamics Pr ocessor Loudness Maximizer Model 9632[...]

Loudness Maximiz er Model 9632 Manual by Hermann Gier V ersion 3.1 – 9/1999 The information in this document has been carefully verified and is assumed to be correct. Howev er Sound P er formance Lab (SPL) reser ves the right to modify the product described in this manual at any time. Changes without notice. This document is the propert y of SPL [...]

3 Co n te n t s Dear customer , Thank you f or the confidence you hav e shown towards Sound P er formance Lab b y purchasing the SPL Loudness Maximizer . Y ou hav e decided to use a tool of high per formance which sets y ou in the position to have faster succ ess and a better sound quality in your music productions and pre-masterings. As a typical [...]

Loudness Maximizer 4 SPL ’ s digital audio processors are designed in cooperation with Spectral Design of Bremen, Germany , who are responsible for the DSP programming. Conc ept: The L oudness Maximizer is the first digital 19-inch dynamics processor to utilize new psycho-acoustic algorithms which are designed to maximize subjective loudness and [...]

Opera tion Safety Indications and Metering: The Loudness Maximizer is equipped with PPM meters for input and output that show the signal lev el with maximum resolution (0.01dB) just before 0dB. The Signal LED is the first LED in each PPM meter that lights up when a digital source is present at the inputs The P ossible LED chain represents the first[...]

Loudness Maximizer 6 Before connecting the Loudness Maximizer switch the po wer off at all connected units. The rear panel provides AES/EBU- and S/P-DIF-inputs and outputs. Any additional channel, status and user-bits are passed through unaltered , and the outputs can be used at the same time if required. The Loudness Maximizer operates with 24 bit[...]

Loudness Maximizer 7 Quick Star t F low Char t The signal analysis computes control data for the Compressor and Limiter and calculates the P ossible as well as the Done loudness increase Possible: The LED bar shows the possible loudness increase Done: The LED bar shows ho w much % of the DESIRED GAIN have been realized The Compressor operates with [...]

Loudness Maximizer 8 Relay hard-bypass for AES/EBU input and output Adjusting the desired increase in loudness C ontr ol Elements The ACTIVE function switches the Loudness Maximizer on or off . The illuminated LED indicates that the proc essing has been activated . The software bypass also compensates f or the 5ms time delay between processed and u[...]

Diagram The Loudness Maximizers Limiter does not produce harmonical distortion Defining the way the Limiter sounds and defining if invalid samples are allowed or not. Y ou can gain more loudness and also star t to manipulate sound when you choose other than the initial settings for SOFT-HARD (see 3) or MORE DENSIT Y (see 4). After having changed th[...]

Loudness Maximizer 10 With the MORE DENSIT Y control you can change the principle behaviour of the control loop of the L oudness Maximizer . This parameter describes the Compressor-to-Limiter proportion. In addition, internal rules and algorithms will be changed, too. The higher the MORE DENSIT Y setting is the more “work” will be done by the C[...]

The Input and Output LED chains are PPM (peak level) meters . By evaluating both LED chains an appro ximated effective loudness increase can be estimated . The LED chains have a very fine resolution before 0dB . The 0dB position is actually showing 0.01dB which represents the last possible output value of the Loudness Maximizer . No clipping is pos[...]

Loudness Maximizer 12 Storing a preset: Depress Store for1 sec. – LED flashes; use Up/Down to select preset number; depress Store again – LED goes out, preset is stored Applying a preset: Depress Apply for1 sec – LED flashes; use Up/Down to select preset number; depress Apply again – LED goes out, preset is applied Operation safety: Presets[...]

1. Sof tware version and date 2.Selecting inputs: The Loudness Maximizer automatically searches f or an input signal. If both inputs are connec ted the AES/EBU input will be selected first. If you want to select the S/P-DIF input you have to call up the INFO pages: AES/EBU input detected. Or: no AES/EBU input detected. Press APPL Y (if AES/EBU is d[...]

14 Or: no S/P-DIF input detected. Press APPL Y (if S/P-DIF is detected): S/P-DIF input with wordclock detected. Or: S/P-DIF input with wordclock detected. 3. Displaying the detec ted sample frequency: The Sample F requency will be detec ted automatically . The display either shows 44,1 kHz, 48 kHz or 32 kHz. 4. Displaying the audio error flag: No =[...]

6. Displaying the Channel Difference Error flag: No = no error detected; Y es = error detected. 7. Setting or erasing the Copy-Prohibit flag: No = flag erased or not set; Y es = flag set. Pressing APPL Y switches off a set Copy-P rohibit flag . It is not possible to set a Copy-P rohibit flag , if there is no Copy Prohibit flag in the processed data[...]

Loudness Maximizer 16 11. Selec ting a MIDI channel: Depress APPL Y to step from channel 01 up to channel 16. In order to increase operation safety only send the necessary MIDI data to the Loudness Maximizer . Unnecessar y information might lead to system failure. Y ou can use MIDI to create a MIDI fade out, if you are working with a digital consol[...]

Loudness Maximizer 17 Adjusted output levels will be st ored and will be active the next time you boot the Loudness Maximizer . If you recognize that your unit does not maximize to full scale, please check the Output Lev el parameter first. The Output Lev el attenuation is not shown in the Output PPM meters! Tip : The Output L evel should only be u[...]

Loudness Maximizer 18 Specifications (1) AES/EBU is defined for levels from 2 V to 7 V Measurements AES/EBU: 4,4 V with load (2) S/P-DIF is defined for levels from 200 mV to 700 mV Measurements S/P-DIF: 500 mV with load Subject to change without notice. Input/Output Sample rate frequency 32-48 kHz, automatic detection AES/EBU, twisted pair (1), AES[...]

Loudness Maximizer 19 SPL electronics GmbH (hereaf ter called SPL) products are warranted only in the country where purchased, through the authorized SPL distributor in that country , against defec ts in material or workmanship. The specific period of this limited warranty shall be that which is described to the original retail purchaser by the aut[...]