SOYO V1.1 инструкция обслуживания

SY-5EHM/5EH5 V1.0/V1.1 Super 7 ™ Motherboard Quick Start Guide FC C Tested To Comply With FCC Standards FOR HOME OR OFFICE USE POST CONSUMER RECYCLED PAPER 100% Installation The SOYO CD Introduction Quick BIOS Setup[...]

NSTL “ Year 2000 Test ” Certification Letter September 23, 1998 Testing Date: September 23, 1998 Certification Date: September 23, 1998 Certification Number: NCY2000-980923-004 To Whom It May Concern: We are please to inform you that the “ SY-5EHM/5EH5 ” system has passed NSTL Year 2000 certification test program. The Y ear 2000 test progra[...]

Declaration of Conformity According to 47 CFR, Part 2 and 15 of the FCC Rules Declaration No.: D872907 July.10 1998 The following designated product EQUIPMEN T : Main Board MODEL NO.: SY-5EH Which is the Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC rules. Operation is subject to the following two conditions : (1) this devic[...]

SOYO  4 5EHM/5EH5 V1.x Super 7 ™ Motherboard Pentiu m ® Class CPU (66&100MHz) supported ETEQ82C663 PCI/AGP Motherboard AT Form Factor Copyright © 1998 by Soyo Computer Inc. Trademarks: Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their owners. Product Rights: Product and corporate names mentione[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 5 Introduction 1 1 Introduction Congratulations on your purchase of the 5EHM/5EH5 V1.x Super 7 ™ Motherboard. This Quick Start Guide describes the steps for installing and setting up your new Motherboard. This guide is designed for all users to provide the basic steps of Motherboard setting and operation. For f[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 6 Introduction SY-5EHM/5EH5 V1.x Motherboard Layout Key Features Ø 100MHz AGP Super 7 ™ platform Ø 512KB/1MByte L2 cache Ø Supports CPU voltage from 2.0V to 3.5V in 0.1V increments Ø PC98, ACPI, Ultra DMA/33 Ø Power-on by modem or alarm Ø Supports AT or ATX power connector Ø Supports Wake-On-LAN (WOL) Ø[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 7 Installation 2 2 Installation To avoid damage to your Motherboard, follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by grasping an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold it by [...]

SY-5EHM/5EH5 V1.x Quick Start Guide 8 Installation Install the Motherboard Follow the steps below in order to perform the installation of your new 5EHM/5EH5 V1.x Super 7 ™ Motherboard. Step 1. Install the CPU To mount the Pentium ® processor that you have purchased separately, follow these instructions. CPU Mount Procedure 1. Lift the socket han[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 9 Installation Step 2. Set SW2 ,JP1 for CPU Voltage SW2 is used to set the CPU core voltage , JP1 is used to select the CPU voltage type single voltage or dual voltage. Please verify the correct voltage settings with your dealer before installation. Use the following table to set SW2, JP1 to the proper voltage va[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 10 Voltage Setting: SW2 JP1 Processor Voltage 1 2 3 4 5 1-2 3-4 3.52 V on on on on off open open IDT X86 CPU C6/2-225* IDT X86 CPU 2-266 IDT X86 CPU 2-300 The IDT X86 CPU C6/2 comes in several versions with different. Voltage. Please ask your dealer for the correct voltage. IDT X86 CPU C6/2-200* IDT X86 CPU 2-233[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 11 Installation Frequency Setting: SW1 Processor Multiplier CPU Bus Clock JP7 JP9 JP10 123456 2.5x 66MHz 2-3 2-3 1-2 on on off off off off Cyrix 6x86 MX PR 200 2.0x 75MHz 2-3 2-3 1-2 on off off off on off Cyrix 6x86 MX PR 233 2.5x 75MHz 2-3 2-3 1-2 on on off off on off Cyrix 6x86 MX PR 266 2.5x 83MHz 1-2 2-3 1-2 [...]

SY-5EHM/5EH5 V1.x Quick Start Guide 12 Installation Jumper JP7 is used to indicate the frequency of the CPU bus clock to the ETEQ chipset. Jumpers JP9 and JP10 are used to determine that the SDRAM is running at the frequency of the CPU bus clock or at that of the AGP clock. CPU BUS Clock AGP BUS Clock PCI Clock JP7 JP9 JP10 SDRAM Clock 66MHz 66MHz [...]

SY-5EHM/5EH5 V1.x Quick Start Guide 13 Installation Step 5. Attach Connectors This section tells how to connect internal peripherals and power supply to the Motherboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LA[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 14 Installation Step 6. Configure Memory Your board comes with one SIMM Bank (2 modules) and two DIMM sockets, providing support for up to 512MB of main memory using DIMM modules from 8MB to 256MB. For 66MHz host bus CPUs use 12ns or faster DIMM modules ; for 83MHz host bus CPUs use 8ns modules. Memory Configurat[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 15 Quick BIOS Setup 3 3 Quick BIOS Setup After the hardware installation is complete, turn the power switch on, then press the <DEL> key during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will display on screen. Then, follow these steps to complete the quick BI[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 16 The SOYO CD 4 4 The S OY O CD The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-5EHM/5EH5 V1.x Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers softwar[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 17 The SOYO CD Please note that if the Start Up program was unable to determine which SOYO Motherboard you own, the manual selection menu will pop up, as shown below. Then select the user's manual file that corresponds to your Motherboard model name and click OK. (Manual Selection Menu) The user's manua[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 18 The SOYO CD Ø After installation of windows, you will need to install the ETEQ drivers. Follow the instruction below. Click the Enter SOYO CD button to display the list of drivers that can be installed on your Motherboard. The start-up program displays the drivers available for the 5EHM/5EH5 V1.x and the Wind[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 19 The SOYO CD  AGP VxD Driver This driver must be installed in order to be able to make use of the on-board AGP Video functionality.  ETEQ Chipset Functions Registry This driver will make the necessary changes to the Windows registry, in order to make sure that Windows has no problems recognizing your ETEQ[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 20 The SOYO CD Note: If no HTML browser is installed on your system, the Start Up program will prompt you on whether or not you would like to install the Internet Explorer* browser. Click YES to install the HTML browser. After the installation is complete, please restart your system. Then re-run the SOYO CD and y[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 21 How to contact us: n If you are interested in our products, please contact the SOYO sales department in the region you live. n If you require Technical Assistance, please contact our Technical Support in the region you live. SOYO prefers Email as communication medium, remember to always add to the email the co[...]

SY-5EHM/5EH5 V1.x Quick Start Guide 22 E-Mail: support@soyo.co.uk SOYO Deutschland GmbH August-Wilhelm-K u hnholz-Str. 15 D-26135 Oldenburg Region Covered: Germany, Austria and Switzerland . ( Zust a ndig f u r Deutschland , O sterreich , Schweiz ) Web Site: www.saat.de , www.soyo- saat.com , www.soyo-saat.de Vertrieb Mainboards , Notebooks und Soy[...]

[...]

Edition: August 1999 Version 1.4 SY-5EHM/5EM5 V1.0/V1.1 SERIAL[...]