Speco Technologies HT-INTT5 инструкция обслуживания

Intensifier Series Camera HT-INTT5 200 New Highway Amityville, NY 11701 631-957-8700 www .specotech.com Please read this manual thoroughl y before operation and keep it handy for further reference.[...]

[...]

Contents 3~4 Feature s ------------------ --------7 Operating Your Cam era * SET UP------------------------------------ -------------- --------------9~11 Precautions Troubleshooting * SET UP LENS-------------------------------- ----------------- ----------12 5~6 * SHUTTER SP EED CONTRO L ---------------------- -----------13~16 * BACK LIGHT---------[...]

Features ♣ SLC ( Speco Light Compensation ) When the image is in front of strong background lighting, your camera allo ws you to get the best image. ♣ OSD Gives you full control of the camera’s advanced functions. ♣ INTE NSIFIE R 1/3 inch density CCD and digital proc essor permit high quality pictures to be captured in very lo w light condi[...]

Precautions * Do not install the cam era in extreme temperat ure conditio ns. - Only u se the came ra under conditions w here tempe ratures are between -10 ℃ and +50 ℃ . Be especi ally careful to provide ventilation when operating under high temperatures. * Do not install or use the came ra in an environment where the humidity is high. - It can[...]

Operating your camera ◈ Functions ◈ OSD Menu Setting LENS OP TION ● DC ● MANUAL SET UP MENU 1. When y ou control by Button s on the Product, refer to the follow ing (OPTION) SHUTTER ● OFF ● F/L ● MANUAL UP WHITE BALANCE ● ATW ● AWC MANUAL ● BACKLIGHT ● OFF ● LOW ● MIDDLE ● HI GH AGC ● OFF ● LOW ● MIDDLE ● HIGH RE[...]

Operating your camera ( Option ) C. System Integration CCD Camera 485(+) •Please Observe Polarity! 1. When controlled by RS-485, Pelco-D prot ocol (Option), re fer to the following. A. DIP S witch Setting on the Ca mera (Factory default : Camera Address = 01, Baud Rate = 2400bps) 485(-) Receiver •Up to 15 Cameras can be controlled by 1 IR Remot[...]

Operating your camera - SET UP Operating your camera - LENS 1. Press the SET button to access the SETUP mode. ● SETUP menu is displaye d on the monitor screen. 1) Setting up the LENS Select the lens pressing the RIGHT button. ① On the SETUP menu screen, move the arrow indicator to the lens using the UP or DOWN button. ② Select the desired fea[...]

Operating your camera – SHUTTER SPEED CONTROL ① 2) Shutter status and speed control You can control brightness of the screen by the shutter speed. ① Press the SET button to display the setup menu and move the arro w indicator to ‘SHUTTER’ using the UP or DOWN button. ② Set ‘SHUTTER’ to the desired mode usin g the LEFT or RIGHT butto[...]

Operating your camera – SHUTTER SPEED CONTROL ② ▶ MANUAL : When setting shutter speed manuall y. You can select speed from ‘1/60’ to ‘1/200,000’se c ▶ ELC : You can control the BRIGHTNESS. ③ When completed, press ‘SET’ Notes ● Avoid pointing the camera directly at a fluorescent lamp. ● When the SHUTTER menu is set to FLK m[...]

Operating your camera - BACKLIGHT 3) SLC (Speco Light Compensation) - BACKLIGHT A built-in SR chip provides intelligent li ght level control to overcome severe Backlight conditions. ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘SLC’ using the UP or DOWN button. ② SET ‘SLC’ to the desired mode us ing t[...]

Operating your camera - WHITE BALANCE 5) WHITE BALANCE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘WHITE BALANCE’ using t he UP or DOWN button. ② Set ‘WHITE BAL.’ to the desired mode using LEFT or RIGHT button. ▶ MANUAL : To fine adjust, select the Manual mode. You can increase or decrease the red[...]

Operating your camera - INTENSIFIER Operating your camera - DNR 6) REDUCE NOISE (Dynamic Noise Reduct ion) DNR reduces the video noise on the screen. ① Press the SET button to display the SETUP menu and move the arrow to ‘REDUCE NOISE’ using the UP or DOWN button. ② SET ‘REDUCE NOISE’ to the desired mode usin g the LEFT or RIGHT button.[...]

Operating your camera - CAMERA TITLE ② Operating your camera - CAMERA TITLE ① 8) NEXT PAGE ① Press the SET button to display the SETUP menu and move the arrow indicator to ‘NEXT PAGE’ using the UP or DOW N button. ② SET ‘NEXT PAGE’ to the desired mode using the LEF T or RIGHT button. ③ Press SET button to access the SETUP mode. ?[...]

Operating your camera – COLOR/SYNC (2) COLOR : You can choose color and B/W mode electronicall y. ① Press the SET button to display the setup menu and move the arro w indicator to ‘COLOR’ using the UP and DOWN button. ② SET ‘COLOR’ to the desired mode us ing the LEFT or RIGHT button. (3) SYNC : Two SYNCHRONIZA TION modes are available[...]

Operating your camera – MOTION DETECTION (4) Whenever your camera detects motion, THE WORDS “motion detecte d’ will appear on the screen. ① Press the SET button to display the setup menu and move the arro w indicator to ‘MOTION’ using the UP and DOWN button. ② SET ‘MOTION’ to the desired mode us ing the LEFT or RIGHT button. Max. [...]

Operating your camera - PRIVACY Operating your camera - MIRROR (5) PRIVACY : To mask area which you want to be private. ① Press the SET button to display the setup menu and move the arro w to ‘PRIVACY’ using the UP and DOWN button. ② SET ‘PRIVACY’ to the desired mode using the LEFT or RIGHT button. (6) REVERSE ① Press the SET button t[...]

Operating your camera - SHARPNESS Operating your camera - RESET/RETURN (7) DETAIL ① Press the SET button to display the setup menu and move the arro w indicator to ‘DETAIL’ using the UP and DOWN button. ② SET ‘DETAIL’ t o the desired mode us ing the LEFT or RIGHT button. (8) DEFAULT : Use to reset your camera to FACTORY DEFAULT SETTING.[...]

Troubleshooting ● Have you set ‘MOTIO N DET. ’ menu to off? ● Have y ou set ‘MD LEVEL’ to low? ● Have you s et ‘MD ARAEA’ properly MOTION DETEC TION function is not acti ve. ● Check that you ha ve proper ly connected the camer a to an appropr iate powe r sour ce. The camer a is not working prop erly, and t he su rface of the cam[...]

DIMENSIONS SPECIFICATIONS -29 ℃ ~ +50 ℃ (-20 ℉ ~120 ℉ ) Operational Temperature ON / OF F (4 Prog rammable Zone) PRIVACY Function Built - in On Screen Display ( O.S.D ) MD1 / MD2 / OFF Motion Detection 50dB (Weight On) S/N ( Y signal) OFF / LOW / MIDDL E / HIGH REDUCE NOISE ATW / AW C / MANUA L WHITE BALANCE 0.003Lux (intensifier) 0.3Lux (s[...]

WARRANTY 37[...]