Sunbeam Bedding HE3100 инструкция обслуживания

Convection Plus Heaters Instruction Booklet HE3100 1200W heater with micathermic elements HE3900 2200W heater with micathermic elements Please read these instructions carefully and retain for future reference.[...]

C o n t e n t s I m p o r t a n t i n s t r u c t i o n s – r e t a i n f o r f u t u r e u s e . Sunbeam’s Safety Precautions 1 Sunbeam’s T otal Safety System 3 Features of your HE3100 Convection Plus Heater 4 Features of your HE3900 Convection Plus Heater 6 Using your Convection Plus Heater – HE3100 8 Using your Convection Plus Heater –[...]

1 If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. S u n b e a m ’ s S a f e t y P r e c a u t i o n s Su nbe am are ver y sa fe ty con sc io us w hen de sig ni ng and man uf ac tu ri ng c[...]

2 If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. S u n b e a m ’ s S a f e t y P r e c a u t i o n s • Th is hea te r bec om es hot dur in g use . T o av oi d bu rns , do not let bar e[...]

3 Safety auto shut-off Y our Sunbeam Convection Plus Heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically cuts power to the heating element, preventing overheating. Once the heater has cooled it will automatically resume normal operation. Thermal back-up fuse In addition to this a[...]

Double heat micathermic elements The revolutionary micathermic heating elements produce both radiant and convection heat. Instant heat radiates from the large surface area in one minute, while natural convection circulates warm air around the room quickly and evenly . Wall mountable The slim design is ideal for wall mounting. The unique reflective [...]

5 Power ON light Illuminates to indicate that the heater is switched on. Mode dial T urn the mode dial to select your desired setting: OFF , LOW (1) or HIGH (2). Thermostat indicator light The red thermostat light indicates that the heater is warming up to the selected temperature and will go out when the selected temperature has been reached. Ther[...]

HI C 6 F e a t u r e s o f y o u r H E 3 9 0 0 C o n v e c t i o n P l u s H e a t e r Double heat micathermic elements The revolutionary micathermic heating elements produce both radiant and convection heat. Instant heat radiates from the large surface area in one minute, while natural convection circulates warm air around the room quickly and eve[...]

HI C 7 Remote control The easy to use remote control enables the heater to be operated from anywhere in the room. LED screen The LED screen displays the current settings including the ambient room temperature, the selected mode, or timer setting. ON/OFF switch Illuminates to indicate that the heater is switched on. Mode button Press the mode button[...]

1. Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions. Note: When turned on for the first time, your new heater will emit a slight odour for up to 8 hours. This is due to the initial heating of the materials used. It is safe, not detrimental to the performance of the heater and will not reoc[...]

9 1. Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions. (Refer to Note on Page 8). 2. Ensure that the ON/OFF switch is in the OFF position. 3. Insert the plug into a 230/240V power outlet and turn the power on. Move the ON/OFF switch (located on the side of the heater) to the ON position. T[...]

10 3. Use the plus/minus arrows to select your desired setting. The LED screen will flash the set value for 5 seconds. After 5 seconds the LED screen will display the ambient room temperature. Note: The temperature range is from 15ºC to 28ºC. If you scroll past 28ºC the display will automatically return to 15ºC. 4. The digital thermostat is now[...]

11 Wall mounting 1. Before wall mounting your heater , remove the wheels. 2. Mark the screw location on the wall, approximately 1 metre from the floor . Note: The heater must be fixed no lower than 6.5cm above the floor and no higher than 1.8 metres above the floor . The heater must also be fixed at least 1 metre from both the corner and ceiling (r[...]

12 Ensure that the heater is switched off and disconnected from the power outlet before cleaning. Carefully wipe the exterior of the heater with a soft damp cloth and dry thoroughly with a dry cloth. Over time, dust may accumulate on the front grille. This can be removed by wiping with a damp cloth, or by carefully going across the grille with a va[...]

‘Su nb eam ’, is a reg ist er ed tr ad ema rk of Sun bea m Cor po rat io n. Mad e in Chin a. Due to mino r ch ang es in des ign or oth er wis e, the pr odu ct may di ff er fr om th e on e sho wn in th is leaf le t. Ba cke d by Sunb ea m’ s 3 Y ear Re pla ce men t Gua ra nte e an d Nat ion al Serv ic e Net wor k. © Cop yr igh t. SUNB EAM COR [...]

Consumer Hotline Australia 1800 025 059 New Zealand 0800 786 232 www .sunbeam.com.au is a registered T rademark of Sunbeam Corporation Limited. ABN 45 000 006 771. © Sunbeam Corporation Limited 2006.[...]