SUPER MICRO Computer 1.0a инструкция обслуживания

S UPER S ER VER 6016T -6RFT+ S UPER S ER VER 6016T -6RF+ S UPER ® USER’S MANUAL 1.0a[...]

The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: F[...]

iii Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6016T - 6RFT+/6016T -6RF+. Installation and maintenance should be performed by expe- rienced technicians only . Manual Organization Chapter 1: Introduction The ?[...]

S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual iv Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X8DTU-6TF+/X8DTU-6F+ serverboard, including the locations and functions of connections, headers and jumpers. Refer to this chapter when adding or removing processors or main memory and when recon fi gur[...]

v Preface Notes[...]

vi S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual T able of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Serverboard Features ..................................................................................... 1-2 Processo[...]

vii T able of Contents Installing the Server into a T elco Rack ........................................................... 2-6 2-6 Checking the Serverboard Setup .................................................................... 2-8 Chapter 3 System Interface 3-1 Overview ..........................................................................[...]

viii S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual X8DTU-6TF+/X8DTU-6F+ Quick Reference ................................................. 5-14 5-8 Connector De fi nitions .................................................................................... 5-15 5-9 Jumper Settings .......................................................[...]

Chapter 1 Introduction 1-1 Overview The SuperServer 6016T -6RFT+/6016T -6RF+ is a comprised of two main subsys- tems: the SC819TQ-R700U 1U server chassis and the X8DTU-6TF+/X8DTU-6F+ dual processor serverboard. Please refer to our web site for information on operating systems that have been certi fi ed for use with the system (www .supermicro.com)[...]

1-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 1-2 Serverboard Features At the heart of the SuperServer 6016T -6RFT+/6016T -6RF+ lies the X8DTU-6TF+/ X8DTU-6F+, a dual processor serverboard based on the Intel® 5520 chipset. Below are the main features of the serverboard. (See Figure 1-1 for a block diagram of the chipset). Processo[...]

1-3 Chapter 1: Introduction 10 suppo r ted ( R A ID 5 i s supp or te d wit h Win dow s OS on ly ). T he SA T A dr ives a re hot-swappable units. Note: Y o u mu s t h a v e RAI D s e t u p to e n a b l e th e h o t -s w a p ca p a b il i ty o f t h e S A T A dr ives . Do cum ent atio n on R A ID se tup gui delin es c an be f ound o n o ur web si te.[...]

1-4 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual PCI Expansion Slots T wo riser cards are included. The RSC-R1UU-E8R+ is located on the right side of the chassis and supports one low - pr o fi l e PCI - E x4 c ard (i n a x8 sl ot). The RSC- R1UU-2E8 is located on the left side of the chassis and supports t wo P CI - E x 8 add - on c [...]

1-5 Chapter 1: Introduction Figure 1-1. Intel 5520 + IOH-36D/ICH10R Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. Processor#1 QPI DDR3 DIMM C A B D E F DDR3 DIMM DDR3 DIMM DDR3 DIMM DDR3 DIMM DDR3 DIMM B C E F 3,4 BMC VGA SWITCH ESI SPI AT M EL A T25DF321 CLINK CLINK PCIE Port 1-4 PCI-E x8 Ge[...]

1-6 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 1-4 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Web Site: www .supermicro.[...]

Chapter 2: Server Installation 2-1 Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your 6016T -6RFT+/6016T -6RF+ up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. This quick setup assumes that your system has come[...]

2-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). • This product is not suitable for use with visual display work place devices acccording to §2 of the the German Ordinance for Work with V isual Display Units. 2-4 W arnings a[...]

Chapter 2: Server Installation 2-3 Rack Mounting Considerations Ambient Operating T emperature If installed in a closed or multi-unit rack assembly , the ambient operating tempera- ture of the rack environment may be greater than the ambient temperature of the room. Therefore, consideration should be given to installing the equipment in an environm[...]

2-4 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 2-5 Installing the System into a Rack This section provides information on installing the 6016T -6RFT+/6016T -6RF+ into a rack unit with the rack rails provided. If the system has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. There are a variety of rack u[...]

Chapter 2: Server Installation 2-5 Installing the Outer Rails Installing the Outer Rails to the Rack 1. Measure the distance from the front rail to the rear rail of the rack. 2. Attach a short bracket to the front side of the right outer rail and a long bracket to the rear side of the right outer rail. 3. Adjust both the short and long brackets to [...]

2-6 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Installing the Server into the Rack Installing the Chassis into a Rack (Figure 2-3) 1. Con fi rm that chassis includes the inner rails and rail extensions . Also, con fi rm that the outer rails are installed on the rack. 2. Line chassis rails with the front of the rack rails. 3. Slide[...]

Chapter 2: Server Installation 2-7 Figure 2-3. Installing the Server into a Rack[...]

2-8 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 2-6 Checking the Serverboard Setup After you install the system in the rack, you will need to open the top cover to make sure the serverboard is properly installed and all the connections have been made. Accessing the Inside of the System 1. First, grasp the two handles on either side a[...]

Chapter 2: Server Installation 2-9 Figure 2-4. Accessing the Inside of the System[...]

2-10 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 2-7 Checking the Drive Bay Setup Next, you should check to make sure the peripheral drives and the hard drives and backplane have been properly installed and all connections have been made. Checking the Drives 1. All drives are accessable from the front of the server . The hard disk dr[...]

Chapter 3: System Interface 3-1 Chapter 3 System Interface 3-1 Overview There are several LEDs on the control panel as well as others on the hard drive carriers to keep you constantly informed of the overall status of the system as well as the activity and health of speci fi c components. There are also two buttons on the chassis control panel and[...]

3-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual HDD Indicates IDE channel activity . On the 6016T -6RFT+/6016T -6RF+ this light indicates HDD and/or DVD-ROM drive activity when fl ashing. 2 1 3-3 Control Panel LEDs The control panel located on the front of the SC819TQ chassis has fi ve LEDs. These LEDs provide you with critical inf[...]

Chapter 3: System Interface 3-3 Power Indicates power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating. 3-4 Drive Carrier LEDs • Green: Eac h SA S/S A T A dr ive c ar r ie r has a gr een L ED. Whe n illu mina ted, thi s gre en LE D indi c ates dr ive a ct ivi t y . A c[...]

3-4 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Notes[...]

4-1 Chapter 4: W arning Statements for AC Systems Chapter 4 Standardized W arning Statements for AC Systems 4-1 About Standardized W arning Statements The following statements are industry standard warnings, provided to warn the user of situations which have the potential for bodily injury . Should you have questions or experience difficulty , cont[...]

4-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual W arnung WICHTIGE SICHERHEITSHINWEISE Dieses W arnsymbol bedeutet Gefahr . Sie be fi nden sich in einer Situation, die zu V erletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen V erfahren zur V orbeugung vor U[...]

4-3 W arning Statements for AC Systems 안전을 위한 주의사항 경고! 이 경고 기호는 위험이 있음을 알려 줍니다. 작업자의 신체에 부상을 야기 할 수 있는 상태에 있게 됩니다. 모든 장비에 대한 작업을 수행하기 전에 전기회로와 관련된 위험요소들을 확인하시고 사전에 사고[...]

4-4 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Installation Instructions W arning! Read the installation instructions before connecting the system to the power source. W arnung V or dem Anschließen des Systems an die Stromquelle die Installationsanweisungen lesen. ¡Advertencia! Lea las instrucciones de instalación antes de conect[...]

4-5 Chapter 4: W arning Statements for AC Systems Circuit Breaker W arning! This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not greater than: 250 V , 20 A. サーキ ッ ト ・ ブレ ーカー この 製 品 は 、 短絡 （過電流 ） 保護装置?[...]

4-6 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Power Disconnection W arning 電源切断の警告 システムコン ポ ー ネン トの 取り 付 けまた は 取り 外し の た め に 、 シ ャ ー シ ー内部に ア ク セ ス する に は 、 シ ステムの 電 源 は す べ てのソースから 切 断さ ?[...]

4-7 Chapter 4: W arning Statements for AC Systems ¡Advertencia! El sistema debe ser disconnected de todas las fuentes de energía y del cable eléctrico quitado de los módulos de fuente de alimentación antes de tener acceso el interior del chasis para instalar o para quitar componentes de sistema. Attention Le système doit être débranché de [...]

4-8 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Equipment Installation 機器の設置 ト レ ーニ ン グを受け認 定 さ れた人だけが こ の装 置 の設 置 、 交換 、 ま たはサー ビ スを許 可 されて いま す 。 W arning! Only trained and quali fi ed personnel should be allowed to install, repla[...]

4-9 Chapter 4: W arning Statements for AC Systems ア ク セ ス 制限区域 この ユ ニッ ト は 、 ア ク セ ス 制限区域に 設置 さ れ る こ と を想定 し て い ま す 。 ア ク セ ス 制限区域は 、 特別な ツ ール 、 鍵と 錠 前 、 そ の他のセ キ ュ リ テ ィ の手 段 を用い て の ?[...]

4-10 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Battery Handling W arning! There is the danger of explosion if the battery is replaced incorrectly . Replace the battery only with the same or equivalent type recommended by the manufacturer . Dispose of used batteries according to the manufacturer's instructions תלבגומ הש[...]

4-1 1 Chapter 4: W arning Statements for AC Systems W arnung Bei Einsetzen einer falschen Batterie besteht Explosionsgefahr . Ersetzen Sie die Batterie nur durch den gleichen oder vom Hersteller empfohlenen Batterietyp. Entsorgen Sie die benutzten Batterien nach den Anweisungen des Herstellers. Attention Danger d'explosion si la pile n'es[...]

4-12 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual W arnung Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein trom zugeführt wird, müssen alle V erbindungen entfernt werden. ¡Advertencia! Puede que esta unidad tenga más de una conexión para fuentes de alimentación. Para cortar por compl[...]

4-13 Chapter 4: W arning Statements for AC Systems Backplane V oltage バ ッ ク プ レー ンの 電圧 シ ス テ ムの稼働 中は危 険な電圧 ま た は電 力が、 バッ ク プレ ーン 上 にか かっ てい ます 。 修理す る 際に は注意 く だ さ い 。 警告 当系统正在进行时，背板上有很危险的[...]

4-14 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Comply with Local and National Electrical Codes W arning! Installation of the equipment must comply with local and national electrical codes. 地方お よ び国 の電気規格に 準拠 機器の取 り 付け は そ の地方 お よ び国の電気規格に 準拠 す る 必要?[...]

4-15 Chapter 4: W arning Statements for AC Systems Product Disposal W arning! Ultimate disposal of this product should be handled according to all national laws and regulations. יצראה למשחה יקוח םואית ! הרהזא תנקתה םייצראהו םיימוקמה למשחה יקוחל תמאות תוי הל תבייח דויצה . ﺕ[...]

4-16 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual W aarschuwing De uiteindelijke verwijdering van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. ¡Advertencia! Al deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Attention La mise au rebut ou le[...]

4-17 Chapter 4: W arning Statements for AC Systems W arnung Die Lüfter drehen sich u. U. noch, wenn die Lüfterbaugruppe aus dem Chassis genommen wird. Halten Sie Finger , Schraubendreher und andere Gegenstände von den Öffnungen des Lüftergehäuses entfernt. ¡Advertencia! Los ventiladores podran dar vuelta cuando usted quite ell montaje del ve[...]

4-18 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual W arning! When installing the product, use the provided or designated connection cables, power cables and AC adaptors. Using any other cables and adaptors could cause a malfunction or a fi re. Electrical Appliance and Material Safety Law prohibits the use of UL or CSA -certi fi ed ca[...]

4-19 Chapter 4: W arning Statements for AC Systems Attention Lors de l'installation du produit, utilisez les bables de connection fournis ou désigné. L'utilisation d'autres cables et adaptateurs peut provoquer un dysfonctionnement ou un incendie. Appareils électroménagers et de loi sur la sécurité Matériel interdit l'util[...]

4-20 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Notes[...]

Chapter 5: Advanced Serverboard Setup 5-1 Chapter 5 Advanced Serverboard Setup Th is ch apter c overs t he ste ps re qui red to i nst all p ro ce ss or s and h eat sin ks to th e X8DTU-6TF+/X8DTU-6F+ ser ver b oar d, c onn ec t the d at a and p ower c ab le s and ins ta ll a dd - on c a rd s. A ll s er ver b oa rd j ump er s a nd c o nn ec t io ns [...]

5-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 5-2 Processor and Heatsink Installation IMPORT ANT! A lways c o nne c t th e powe r c or d last a nd r emove i t fi rst bef ore add- ing , rem oving o r c hang ing a ny hard ware c ompo nent s. M ake sure t hat yo u inst all th e pro c es sor i nto th e CPU s oc ket before you i nst al[...]

Chapter 5: Advanced Serverboard Setup 5-3 1. After removing the plastic cap, use your thumb and the index fi nger to hold the CPU at the north and south center edges. 2. Align the CPU key (the semi-circle cutout) with the socket key (the notch below the gold color dot on the side of the socket). 3. Once the CPU and the socket are aligned, carefull[...]

5-4 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Thermal Grease CPU 1. Place the heatsink on top of the CPU so that the four mounting holes are aligned with those on the retention mechanism. 2. Remove the thin layer of protective fi lm from the copper core of the heatsink. W arning : The CPU may overheat if the protective fi lm is n[...]

Chapter 5: Advanced Serverboard Setup 5-5 1. Unplug the power cord from the power supply . 1. Unscrew and remove the heatsink screws in the sequence shown in the picture below . 2. Hold the heatsink and gently wiggle it to loosen it from the CPU. (Do not use excessive force when doing this!) 3. Once the heatsink is loosened, remove it from the CPU.[...]

5-6 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 5-3 Connecting Cables Now that the processors are installed, the next step is to connect the cables to the serverboard. Connecting Data Cables The cables used to transfer data from the peripheral devices have been carefully routed in precon fi gured systems to prevent them from blockin[...]

Chapter 5: Advanced Serverboard Setup 5-7 Figure 5-1. Front Control Panel Header Pins (JF1) NMI x (key) 3.3V UID Switch/Vcc NIC1 Active LED NIC2 Active LED Red: (Blue LED Cathode) 3.3V Reset Button Power Button Ground x (key) Power LED HDD LED NIC1 Link LED NIC2 Link LED Blue: OH/Fan Fail/Power Fail/UID LED Power Fail LED Ground Ground 2 1 20 19 5-[...]

5-8 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 5-5 Installing Memory Note: Check the Supermicro web site for recommended memory modules. CAUTI O N E x e r c i s e e xt r e m e ca r e w h e n i n s ta l l i n g o r r e m o v i n g D I MM m o d u l es to pr event any po ss ibl e dam age. Installing DIMMs 1. Insert the desired number o[...]

Chapter 5: Advanced Serverboard Setup 5-9 Memory Support for 5500 Processor(s) RDIMM Population w/5500 Processors Installed DIMM Slots per Channel DIMMs Populated per Channel DIMM T ype (Reg.= Registered) Speeds (in MHz) Ranks per DIMM (any combination; SR=Single Rank, DR=Dual Rank, QR=Quad Rank) 3 1 Reg. DDR3 ECC 800,1066,1333 SR or DR 3 1 Reg. DD[...]

5-10 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Notes : Due to OS limitations, some operating systems may not show more than 4 GB of memory . Due to memory allocation to system devices, memory remain- ing available for operational use will be reduced when 4 GB of RAM is used. The reduction in memory availability is disproportional. [...]

Chapter 5: Advanced Serverboard Setup 5-1 1 Possible System Memory Allocation & Availability System Device Size Physical Memory Remaining (4 GB T otal System Memory) Firmware Hub fl ash memory (System BIOS) 1 MB 3.99 Local APIC 4 KB 3.99 Area Reserved for the chipset 2 MB 3.99 I/O APIC (4 Kbytes) 4 KB 3.99 PCI Enumeration Area 1 256 MB 3.76 PC[...]

5-12 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual PCI Slot/Card Con fi gurations Riser Card Expansion Card Supported RSC-R1UU-2E8 (left side) 1x UIO card and 1x PCI-E x16 card RSC-R1UU-E8R+ (right side) 2 x l ow - pr o fi le PCI- E x8 cards 5-6 Adding PCI Cards PCI Expansion Slots The X8DTU-6TF+/X8DTU-6F+ has one Universal PCI slot.[...]

Chapter 5: Advanced Serverboard Setup 5-13 Figure 5-4. SUPER X8DTU-6TF+/ Layout 5-7 Serverboard Details Notes: TLAN1 and TLAN 2 are included on the X8DTU-6TF+ (6016T -6RFT+) only . Jumpers not indicated are for test purposes only. When LED1 (the onboard power indicator) is on, system power is on. Unplug the power cable before installing or removing[...]

5-14 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual X8DTU-6TF+/X8DTU-6F+ Quick Reference Jumper Description Default Setting JBT1 Clear CMOS See Section 5-9 JI 2 C1/JI 2 C2 SMB to PCI-E Slots Open (Disabled) JPG1 VGA Enable Pins 1-2 (Enabled) JPL1 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled) JPS1 SAS Enable/Disable Pins 1-2 (Enabled) JPTL[...]

Chapter 5: Advanced Serverboard Setup 5-15 5-8 Connector De fi nitions A TX Power Connector The primary A TX power supply con- nector meets the SSI EPS 12V speci- fi cation. Make sure that the orientation of the connector is correct. See the table on the right for pin de fi nitions. Processor Power Pin De fi nitions (JPW2/JPW3) Pins De fi niti[...]

5-16 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual NIC1 LED The NIC1 (Network Interface Control- ler) LED connection is located on pins 1 1 and 12 of JF1. Attach the NIC1 LED cable to display network activity . Refer to the table on the right for pin de fi nitions. NIC2 LED The NIC2 (Network Interface Control- ler) LED connection is l[...]

Chapter 5: Advanced Serverboard Setup 5-17 Overheat (OH)/Fan Fail/PWR Fail/ UID LED Connect an LED to pins 7 and 8 of JF1 to provide advanced warning of chassis overheating or fan failure. These pins also work with the front UID indicator , which will activate as either a solid or fl ashing blue LED depending on whether the LED was activated via I[...]

5-18 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Fan Headers The board has eight fan headers designated Fan1 through Fan8. F AN1 through F AN6 are for chassis/system fans while F AN7 and F AN8 are used for CPU heatsink fans. Their speed is controlled via Thermal Management with a BIOS setting. See the table on the right for pin de ?[...]

Chapter 5: Advanced Serverboard Setup 5-19 Chassis Intrusion A Chassis Intrusion header is located at JL1. Attach the appropriate cable to inform you of a chassis intrusion. Chassis Intrusion Pin De fi nitions Pin# De fi nition 1 Intrusion Input 2 Ground A TX PS/2 Keyboard and PS/2 Mouse Ports The A TX PS/2 keyboard and the PS/2 mouse ports are l[...]

5-20 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual LAN (Ethernet) Ports T wo Ethernet ports (designated LAN1 and LAN2) are located beside the VGA port on the I/O backplane. A dedicated IPMI LAN port is also located above USB1. These ports accept RJ45 type cables. UID Buttons There are two Unit Identi fi cation (UID) buttons on the ser[...]

Chapter 5: Advanced Serverboard Setup 5-21 Universal I/O Power Connector Pin De fi nitions Pin# De fi nition Pin # De fi nition B1 P5V A1 P3V3 B2 P5V A2 P3V3 B3 P5V A3 P3V3 B4 P5V A4 P3V3 B5 P5V A5 P3V3 B6 P5V A6 P3V3 B7 P5V A7 P3V3 B8 P5V A8 P3V3 B9 P5V A9 P3V3 B10 P5V A10 P3V3 B1 1 N12V A1 1 P3V3 B12 P3V3 STBY A12 P3V3 B13 P3V3 STBY A13 P12V B[...]

5-22 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual T rusted Platform Module Header A T rusted Platform Module header (JTPM) is located next to the COM2 connection. This header provides TPM support to ensure data integrity and system security . Refer to the table on the right for pin de fi nitions. T rusted Platform Module (TPM) Pin De[...]

Chapter 5: Advanced Serverboard Setup 5-23 5-9 Jumper Settings Explanation of Jumpers T o modify the operation of the serverboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector . Pin 1 is identi fi ed with a square solder pad on the printed cir- cuit board. S[...]

5-24 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual LAN/TLAN Enable/Disable Change the setting of jumper JPL1 to enable or disable the LAN1 and LAN2 onboard Ethernet (RJ45) ports and JPTLAN to ena ble t he 10 Gb L A N po r t s on t he X8 DTU - 6T F+ . See the table on the right for jumper settings. The default setting is enabled. W atch[...]

Chapter 5: Advanced Serverboard Setup 5-25 5-10 Onboard Indicators LAN LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each Gigabit LAN port, one LED indicates activity when blinking while the other LED may be green, amber or off to indicate the speed of the connection. See the table on the right for the func- tions associat[...]

5-26 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual BMC Heartbeat LED State De fi nition Blink- ing BMC: Normal SAS Activity & SAS Heartbeat LEDs A SAS A ct iv it y LED ( LED 4) and a SA S He ar tb eat L ED (LED 5) are pr ovi de d on th e ser ver bo ard. W hen LED 4 i s blin k- ing , th e SAS c o nne ct io ns a re ac ti ve. Wh e n [...]

Chapter 5: Advanced Serverboard Setup 5-27 5-1 1 SA T A Port Connections SA T A Ports Th ere a re si x Se ri al A T A Po r t s (I - SA T A0~ I - SA T A 5) on the ser verboard, whi ch a re sup por ted by t he Inte l IC H 10R S out h Br i dge See the table on the right for pin de fi nitions for the onboard SA T A ports. SA T A Port Pin De fi nition[...]

5-28 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Figure 5-5. Driver/T ool Installation Display Screen 5-12 Installing Software The Supermicro ftp site contains drivers and utilities for your system at ftp://ftp. supermicro.com . Some of these must be installed, such as the chipset driver . After accessing the ftp site, go into the CD[...]

Chapter 5: Advanced Serverboard Setup 5-29 SuperDoctor III The SuperDoctor® III program is a web-based management tool that supports remote management capability . It includes Remote and Local Management tools. The local management is called SD III Client. The SuperDoctor III program allows you to monitor the environment and operations of your sys[...]

5-30 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Figure 5-7. SuperDoctor III Interface Display Screen (Remote Control) Note: The SuperDoctor III program and User ’s Manual can be downloaded from the Supermicro web site at http://www .supermicro.com/products/accessories/soft- ware/SuperDoctorIII.cfm . For Linux, we recommend that yo[...]

Chapter 6: Advanced Chassis Setup 6-1 Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform mainte- nance on the SC819TQ chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered. If some steps are unnecessary , skip ahead to the nex[...]

6-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Figure 6-1. Chassis: Front and Rear Views 6-2 Control Panel The control panel (located on the front of the chassis) must be connected to the JF1 connector on the serverboard to provide you with system status indications. These wires have been bundled together as a ribbon cable to simpli[...]

Chapter 6: Advanced Chassis Setup 6-3 6-3 System Fans Five 4-cm heavy duty counter-rotating fans provide the cooling for the 6016T - 6RFT+/6016T -6RF+. Each fan unit is actually made up of two fans joined back- to-back, which rotate in opposite directions. This counter-rotating action generates exceptional air fl ow and works to dampen vibration l[...]

6-4 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Figure 6-2. System Cooling Fans Accessing the Drive Bays Hard Drives: Because of their hotswap capability , you do not need to access the inside of the chassis or power down the system to install or replace the SAS/SA T A drives. Proceed to the next section for instructions. DVD-ROM Dri[...]

Chapter 6: Advanced Chassis Setup 6-5 Hard Drive Installation The hard drives are mounted in drive carriers to simplify their installation and removal from the chassis. System power may remain on when removing carriers with drives installed. These carriers also help promote proper air fl ow for the drive bays. For this reason, even empty carriers [...]

6-6 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Installing/Removing a Hard Drive 1. T o remove a carrier , push the release button located beside the drive LEDs. 2. Swing the colored handle fully out and use it to pull the unit straight out (see Figure 6-4). Note: Y our operating system must have RAID support to enable the hot-plug c[...]

Chapter 6: Advanced Chassis Setup 6-7 DVD-ROM Drive Installation The top cover of the chassis must be opened to gain full access to the DVD-ROM drive bay . The 6016T -6RFT+/6016T -6RF+ accomodates only slim DVD-ROM drives. Side mounting brackets are needed to mount a slim DVD-ROM drive in the 6016T - 6RFT+/6016T -6RF+ server . Y ou must power down [...]

6-8 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 6-4 Power Supply The SuperServer 6016T -6RFT+/6016T -6RF+ has a 700 watt redundant power supply consisting of two power modules. Each power supply module has an auto- switching capability , which enables it to automatically sense and operate at a 100V - 240V input voltage. Power Supply [...]

Chapter 6: Advanced Chassis Setup 6-9 Figure 6-5. Removing/Replacing the Power Supply 1 2[...]

6-10 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Notes[...]

Chapter 7: BIOS 7-1 Chapter 7 BIOS 7-1 Introduction This chapter describes the AMI BIOS Setup Utility for the X8DTU-6F+/X8DTU-6TF+. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS Setup Utility setup screens. Starting BIOS Setup Utility T o enter the AMI BIOS Setup [...]

7-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Note : For AMI BIOS Recovery , please refer to the AMI BIOS Recovery Instructions posted on our website at http://www .supermicro.com/support/ manuals/. Starting the Setup Utility Normally , the only visible Power-On Self-T est (POST) routine is the memory test. As the memory is being t[...]

Chapter 7: BIOS 7-3 System Overview: The following BIOS information will display . System Time/System Date Use this option to change the system time and date. Highlight System Time or Sys- tem Date using the arrow keys. Key in new values through the keyboard and press <Enter>. Press the <T ab> key to move between fi elds. The date must[...]

7-4 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 7-3 Advanced Setup Con fi gurations Use the arrow keys to select Advanced and press <Enter> to access the submenu items.  Boot Features Quick Boot If enabled, this feature will skip certain tests during POST to reduce the time needed for system boot. The options are Enabled an[...]

Chapter 7: BIOS 7-5 Hit 'Del' Message Display Se lec t Ena ble d to di spl ay "P res s D EL to r un Set up" du ri ng PO ST . The options are Enabled and Disabled. Interrupt 19 Capture Interrupt 19 is the software interrupt that handles boot disk functions. When this item is set to Enabled, the ROM BIOS of the host adaptors will [...]

7-6 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual • Cache L2 : This item displays the size of Cache L2 of the CPU for the moth- erboard. • Cache L3 : This item displays the size of Cache L3 of the CPU for the moth- erboard. • Ratio Status : This item displays the status of the CPU ratio. • Ratio Actual V alue : This item displa[...]

Chapter 7: BIOS 7-7 Intel® Virtualization T echnology (A vailable when supported by the CPU) Se lec t Enab led t o use t he feat ure of V ir tua liz ati on T ec hno log y to all ow on e plat fo r m to r un mul tip le op er atin g system s and a ppl ic ati ons i n inde pe nde nt par ti tio ns, c rea t- ing m ult ipl e "v ir tu al" sy stem[...]

7-8 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual C1E Support Select Enabled to use the feature of Enhanced Halt State. C1E signi fi cantly reduces the CPU's power consumption by reducing the CPU's clock cycle and voltage during a "Halt State". The options are Disabled and Enabled . Intel® C-ST A TE T ech If enabl[...]

Chapter 7: BIOS 7-9 • Memory Reference Code: This item displays the memory reference code for the motherboard. • QPI Reference Code: This item displays the QPI reference code for the moth- erboard. QPI (Quick Path Interconnect) Links Speed QuickPath Interconnect (QPI) is the connection between the CPU and the motherboard's I/O hub. Use thi[...]

7-10 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Channel Interleave This feature allows the user to con fi gure the Memory Interleave settings for an onboard memory channel. The options are 1-way , 2-way , 3-way , 4-way , and 6-way . Bank Interleave This feature allows the user to con fi gure the Memory Interleave settings for an o[...]

Chapter 7: BIOS 7-1 1 IOH PCI-E Max Payload Size Some add-on cards perform faster with the coalesce feature, which limits the payload size to 128B; while others, with a payload size of 256B which inhibits the coalesce feature. Please refer to your add-on card user guide for the desired setting. The options are 256B and 128B. ME-HECI Support Select [...]

7-12 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual SA T A#1 Con fi guration If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while se- lecting Enhanced sets SATA#1 to native SATA mode. The options are Disabled, Compatible and Enhanced . Con fi gure SA T A#1 as (Not available when SA T A#1 Con fi guration is di[...]

Chapter 7: BIOS 7-13 LBA/Large Mode LBA (Logical Block Addressing) is a method of addressing data on a disk drive. In the LBA mode, the maximum drive capacity is 137 GB. For drive capacities over 137 GB, your system must be equipped with a 48-bit LBA mode addressing. If not, contact your manufacturer or install an A T A/133 IDE controller card that[...]

7-14 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Select SWDMA2 to allow the BIOS to use Single Word DMA mode 2. It has a data transfer rate of 8.3 MB/s. Select MWDMA0 to allow the BIOS to use Multi Word DMA mode 0. It has a data transfer rate of 4.2 MB/s. Select MWDMA1 to allow the BIOS to use Multi Word DMA mode 1. It has a data tra[...]

Chapter 7: BIOS 7-15 Plug & Play OS Selecting Y es allows the OS to con fi gure Plug & Play devices. (This is not required for system boot if Plug & Play is supported by your OS.) Select No to allow the AMI BIOS to con fi gure all devices in the system. PCI Latency Timer This feature sets the latency T imer of each PCI device installe[...]

7-16 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual  Super IO Device Con fi guration Serial Port1 Address/ Serial Port2 Address This option speci fi es the base I/O port address and the Interrupt Request address of Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial port from accessing any system resources. When [...]

Chapter 7: BIOS 7-17 to keep C on so le Red ire ct io n act ive d ur ing P OST an d Bo ot Loa der . T he opt io ns are D isab led, B oot L oade r , an d Alway s . T erminal T ype This feature allows the user to select the target terminal type for Console Redirec- tion. The options are ANSI, VT100 , and VT-UTF8. VT -UTF8 Combo Key Support A terminal[...]

7-18 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual CPU 1 T emperature/CPU 2 T emperature/System T emperature This feature displays current temperature readings for the CPU and the System. The following items will be displayed for your reference only: CPU1 T emperature/CPU2 T emperature The CPU thermal technology that reports absolute t[...]

Chapter 7: BIOS 7-19 2. The information provided above is for your reference only . For more information on thermal management, please refer to Intel’s W eb site at www .Intel.com. System T emperature: Th e syste m temp erat ure w ill b e disp layed (i n de gre es in Ce lsi us an d F a hren hei t ) as i t is dete cte d by the B IOS . Fan 1 ~ Fan [...]

7-20 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual ACPI APIC Support (Available ACPI A ware O/S='Y es') Select Enabled to include the ACPI APIC T able Pointer in the RSDT (Root System Description T able) pointer list. The options are Enabled and Disabled. APIC ACPI SCI IRQ When this item is set to Enabled, APIC ACPI SCI IRQ i[...]

Chapter 7: BIOS 7-21 BIOS AC[SCLEAN] (A vailable when Intel TXT(L T) Initialization is enabled) Select Enabled to allow the processor to load an authenticated code (AC) module in an internal memory partition to ensure that the CPU, chipset and all other related components are launched in the same protected environment for trusted-platform computing[...]

7-22 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Execute TPM Command (A vailable when TCG/TPM Support = 'Y es') Select Enabled to execute TPM commands you've selected. Select Don't Change to keep the current TPM commands without making any changes. Select Dis- abled to abandon the changes you have made on TPM comm[...]

Chapter 7: BIOS 7-23 • SEL Record T ype • Event T imestamp • Generator ID • Event Message Format V er . • Event Sensor T ype • Event Sensor Number , • Event Dir T ype • Event Data. Clear BMC System Event Log Clear BMC System Log now Select OK and press the <Enter> key to clear the BMC system log immediately . Select Cancel to [...]

7-24 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual assigned to the client can be reassigned to a new client. Select Static (Static Allocation) to allow the host server to allocate an IP address based on a table containing MAC Address/IP Address pairs that are manually entered (probably by a network administrator). Only clients with a M[...]

Chapter 7: BIOS 7-25 after an operating system failure is detected. The options are [5 Min] , [1 Min], [30 Sec], and [10 Sec].  DMI Event Log Con fi guration View Event Log Use this option to view the System Event Log. Mark All Events as Read This option marks all events as read. The options are OK and Cancel. Clear Event Log This option clears[...]

7-26 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Supervisor Password This item indicates if a Supervisor password has been entered for the system. "Not Installed" means a Supervisor password has not been used. User Password This item indicates if a user password has been entered for the system. " N ot In - st all ed&qu[...]

Chapter 7: BIOS 7-27 7-5 Boot Con fi guration Use this feature to con fi gure boot settings.  Boot Device Priority This feature allows the user to specify the sequence of priority for the Boot Device. The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device, 5th boot device and Disabled. • 1st Boot Device - [SA T A[...]

7-28 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual 7-6 Exit Options Select the Exit tab from the AMI BIOS Setup Utility screen to enter the Exit BIOS Setup screen. Save Changes and Exit When you have completed the system con fi guration changes, select this option to leave the BIOS Setup Utility and reboot the computer , so the new sy[...]

Chapter 7: BIOS 7-29 Load Fail-Safe Defaults T o set this feature, select Load Fail-Safe Defaults from the Exit menu and press <Enter>. The Fail-Safe settings are designed for maximum system stability , but not for maximum performance.[...]

7-30 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Notes[...]

A-1 Appendix A: BIOS Error Beep Codes Appendix A BIOS Error Beep Codes During the POST (Power-On Self-T est) routines, which are performed each time the system is powered on, errors may occur . Non-fatal errors are those which, in most cases, allow the system to continue the boot-up process. The error messages normally appear on the screen. Fatal e[...]

A-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Notes[...]

B-1 Appendix B: System Speci fi cations Appendix B System Speci fi cations Processors Si ngl e or du al Intel® 5500/5600 Series processors in LGA1366 sockets No te: Ple ase r efe r to our w eb si te fo r a com pl ete li sti ng of su ppo r ted p roc es so rs. Chipset Intel 5520/ICH10R chipset BIOS 32 Mb AMI® SPI Flash ROM Memory Capacity Eig hte[...]

B-2 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Expansion Slots Left side: two PCI-E x8 add-on cards (w/ RSC - R1 U U -2E8 riser) Right side: one PCI-E x8 card (w/ RSC-R1UU-E8R+ riser) Serverboard 6016T -6RFT+: X8DTU-6TF+ (Proprietary form factor) 6016T -6RF+: X8DTU-6F+ (Proprietary form factor) Dimensions: 16.5 x 12.8 in (419 x 325 [...]

B-3 Appendix B: System Speci fi cations Regulatory Compliance Electromagnetic Emissions: FCC Class A, EN 55022 Class A, EN 61000-3-2/-3-3, CISPR 22 Class A Electromagnetic Immunity: EN 55024/CISPR 24, (EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN 61000-4-1 1) Safety: CSA/EN/IEC/UL 60950-1 Compliant, UL or [...]

B-4 S UPER S ERVER 6016T -6RFT+/6016T -6RF+ User's Manual Notes (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency com- munication devices or other critical systems whose failur[...]