Swisher POL 10550 инструкция обслуживания

50 ” FRONT MOUNT/ TRAILMOWER OWNER’S MANUAL 1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093 PHONE 660-747-8183 FAX 660-747-8650 MODEL NO. Manufacturing quality lawn care equipment since 1945 Assembly Operation Service and Adjustment Repair Parts Made In The USA Rev. 3.19.2003 Read and follow all Safety Precautions and Instruction[...]

SAFETY PRECAUTIONS • Read the manual. Learn to operate this machine safely. • Always disconnect the spark plug wire and place the wire where it cannot contact the spark plug, to prevent accidental starting the engine when setting up, trans porting, adjusting or making repairs. • Keep all shields and guards in place. • Understand the speed, [...]

• Turn off the blades when not mowing. Before leaving the machine, turn off the blades and stop the engine. • Watch for traffic when operating near or crossing roadways. • Do not operate the mower if it has been dropped or damaged in any manner or if the mowe r vibrates excessively. Excessive vibration is an indication of damage. Repair mower[...]

MOWER MAINTENANCE GENERAL RECOMMENDATIONS The warranty on this trailmower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain unit as instructed in this manual. So me adjustments will need to be made periodically to maintain your unit properly. All adjustment[...]

LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. Thi[...]

OPERATING YOUR MOWER INTENDED USE This trail mower is designed to produce a quality finish cut on lawns, golf courses, etc. It is not designed to clear brush or cut saplings. Your mower be should pushed in front of or be towe d behind an ATV, a golf cart, lawn tractor, or another similar approved vehicle. It is not meant for speeds exceeding 5 MPH.[...]

STARTING THE ENGINE • See engine manufacturer’s instructions for the type and amount of oil and fuel used. Engine must be level to accurately check and fill oil. Do not overfill. • Park vehicle and mower on a level surface, set the vehicle p arking brake, and disengage blades. • Check spark plug wire, oil, and fuel. • Check all electrical[...]

STOP MOWING • Bring vehicle to a full st op. • Disengage clutch lever by moving lever to center position. • Turn key switch to “OFF” position. TRANSPORTING MOWER • Never transport unit with engine running. • If transporting unattached from tow vehicle, remove spark plug wire and place it where con tact with the spark plug cannot be ma[...]

SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. OD33 – Speed Decal OD43 – Flying Debris Decal OD45 – Warning Decal OD10 – BLADE ENGAGE DECAL OD55 – Triangle Danger Decal OD75 – Polaris Decal OD99124 – 50” Decal OD99 – ON/OFF DECAL 9[...]

FRAME ASSEMBLY FIGURE 1 Item No. Description Part # 1 Frame Weldment 5107S 2 Caster Weldment 5072 3 Tire & Wheel NO Tread 4.10x3.5-5 5057 4 Bearing, Flanged 3/4 ID CB58 5 3/4 Push Nut BLK Plastic NB-687 6 3/4ID X 1 1/4OD 10 GA. Washer NB-184 7 5/16-18 X 2 1/2 HCC GR5 ZP NB-138 8 5/16-18 Nylok Nut NB-181 9 Caster Lock 5056S 10 1/8 X 1 Cotter Pin[...]

DECK ASSEMBLY FIGURE 2 See Detail (Page 12) See Detail (Page 14) See Detail (Page 14) 14 5 14 8 4 12 14 18 2 17 9 16 14 15 1 4 13 6 19 34 10 11 26 7 20 Item # Description Part # Item # Description Part # 1 POL 50" DECK WELDMENT 5101S 18 5/16-18 X 4 Carriage Bolt NB-101 2 ENGAGE CABLE MOUNT 5095TK 19 3/8 USS Washer NB-271 3 Grass Chute Mount 60[...]

MOTOR BASE ASSEMBLY ENGINE SET-UP FIGURE 4 Item No. Description Part # 13 10 1/2 HP B&S Engine N/A 14 3/8-24 X 1 Engine Bolt Locktite NB-238N 15 Washer Belleville 699 16 1/4 X 1 Key Stock 9031 17 Engine Pulley- 5.5" 688 18 Engine Pulley Spacer Short 689S 19 Engine Pulley Spacer Long 689L 13 19 16 17 18 15 14 Figure 3 Item No. Description P[...]

BELT CONFIGURATION Figure 5 3752 (112 ” Belt) T 239 (39 ” Belt) 13[...]

1 2 2 14 Blade Driver Assy. 9058- 5.75 ” (Center Shaft) 9018- 4.25 ” (Outer Shafts) 10 7 11 8 4 10 15 16 5 6 3 9 13 12 Figure 6 BLADE DRIVER SET-UP 14 7 Outer Blade Driver Configuration Center Blade Driver Configuration Item No. Description Part # 1 Center Shaft 9076 2 Blade Bearing B98 3 Bearing Housing 9057TK 4 Pulley Spacer 6104RS 5 Blade Mo[...]

Console Assembly Wiring Diagram Figure 7 Figure 8 WHBP50 (Complete Wiring Harness) Item No. Description Part # 1 Console Weldment 5136TK 2 Clutch Cable Clevis 9023 3 T Handle 4463TK 4 Link for Console 4461TK 5 5/16-18 X 1 1/2 Torx Pan ZP NB-591 6 1/4 SAE Washer NB-274 7 1/4 X 1 1/2 Clevis Pin NB-518 8 3/32 X 3/4 Cotter Pin NB-597 9 5/16-18 Jam Nut [...]

OWNER’S MANUAL MODEL NO. Each mower has its own model number. Each engine has its own model number. The model number for the mower will be found on the right hand side of the drive belt housing. The model number for the engine will be found on the top of the blower fan housing. All mower parts listed herein may be ordered directly from Swisher Mo[...]