Sylvania 63134C инструкция обслуживания

COLOR TV/VCR 63134C (13 inch) 63194C (19 inch) O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. E NERGY S TAR is a U.S. registered mark. ® ® ® If you need additional assistance f or set-up or operating after reading owner’ s manual, please cal[...]

1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions- All opera[...]

- 3 - EN 9I03 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No. 70, provides information with respect to proper[...]

AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radi[...]

- 5 - EN 9I03 T ABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula- tions concerning chemical wast[...]

- 6 - EN 9I03 FEA TURES • Rotary 4-head Record/Pla yback System– Four heads ensure excellent picture quality and special effects playback. • Index Sear ch– Fast-forwards to start of next recording. • Slow Motion– V iew recorded program at slower than normal speed. • Infrared remote control • Bilingual on screen menu displa y selecta[...]

- 7 - EN 9I03 OPERA TING CONTROLS AND FUNCTIONS - TV/VCR FRONT P ANEL - 1 VIDEO input jack– Connect to the video output jack of your video camera or another VCR. 2 A UDIO input jack– Connect to the audio output jack of your audio equipment, video camera or another VCR. 3 PO WER button– Press to turn TV/VCR on and off. Press to activate timer [...]

- 8 - EN 9I03 - REAR VIEW -* ANT . 28 27 9 P LA Y button– Press to begin playback. K b utton– • Press to select setting modes from the on screen menu. • Press to enter digits when setting program. (for example: setting clock or timer program) 10 F .FWD button– Press to rapidly advance the tape, or to view the picture rapidly in forward du[...]

- 9 - EN 9I03 PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied with 13” model only) is detachable. Insert the stem of the antenna into the hole on the upper-back portion of the TV/VCR.Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT . termi- nal of the TV/VCR as sh[...]

- 10 - EN 9I03 INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow . 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover . SET UP FOR USE Y ou can program the tuner to scan[...]

- 11 - EN 9I03 CLOCK SET UP (AUTO / MANUAL) Make sure ... • TV/VCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:) • The channel is properly set in advance. NOTES: • Auto clock setting only needs to be set once[...]

- 12 - EN 9I03 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Begin auto preset Press the PLA Y/ K [...]

- 13 - EN 9I03 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Select “ADD/DELETE CH” Press the PLA Y/ K or STOP/ L but- ton to point to “ADD/DELETE CH”. Press the F .FWD/ B button. 3 Enter the desired chan[...]

- 14 - EN 9I03 TV OPERA TION WA TCHING A TV PROGRAM 1 T urn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR [...]

- 15 - EN 9I03 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, yo[...]

- 16 - EN 9I03 3 Select your desired item Press the PLA Y/ K or STOP/ L but- ton to point to your desired item. Then, press the F .FWD/ B button to select [BLOCK] or [VIEW]. • When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically . Also, the lower rating will turn [VIEW] automatically . • Whe[...]

- 17 - EN 9I03 PLA YBACK INSERTING A CASSETTE Insert the cassette in the direction as shown. Push in gently , but continuously , on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on. CORRECT Window WRONG This TV/VCR will operate with any cassette that has the mark. For best results, we recommen[...]

- 18 - EN 9I03 PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)Y ou may view a video tape at a high speed in either a forward or reverse direction by pressing the F .FWD or REW button during playback (in the SP / LP / SLP modes). 2)Press it again and the T[...]

- 19 - EN 9I03 NOTES: • T ime Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time. • This function will not operate in recording mode. In the example below: To watch a program that is 2 hours, 50 minutes from the present tape position, in either direction. 1 Insert a tape . 2 Select “TIME SEARCH” mode Pres[...]

- 20 - EN 9I03 Make sure ... • TV/VCR power is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONL Y record and view the same channel. RECORDING ERASE PREVENTION Y ou can prevent acciden- tal erasi[...]

- 21 - EN 9I03 A void overlap of programs ... There is a chance that a program will not be record- ed. When programs overlap: • The program with the earliest start time will record first. • Once the earliest program finishes recording, the overlapping programs will record in the order of the program number . • The illustration below demonstra[...]

- 22 - EN 9I03 For every day recording : To r ecord a TV program at the same time on the same channel every day . (Example: Monday thr ough Sunday) Press the STOP/ L (down) but- ton until “EVR Y DA Y” appears. Then, press the F .FWD/ B button. For weekly recording : To r ecord a TV pr ogram at the same time on the same channel every week. (Exam[...]

- 23 - EN 9I03 TO CANCEL AN AUTOMA TIC TIMER RECORDING • After setting a pr ogram; 1)Press the POWER button. 2)Repeat steps [1] ~ [2] under TIMER RECORD- ING, page 21, and select a program you want to cancel. 3)Press the T -PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. • While recording is in pr ogress;[...]

- 24 - EN 9I03 2 Select “TV” or “T APE” Press the PLA Y/ K or STOP/ L but- ton until it points to “TV/T APE”. Press the F .FWD/ B or REW/ s button, and select [TV] or [T APE]. 3 Set wake up time Press the PLA Y/ K or STOP/ L but- ton until it points to “TIME”. Press the F .FWD/ B or REW/ s button until your desired wake up time appe[...]

- 25 - EN 9I03 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in luke- warm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD CLEANING • Au[...]

- 26 - EN 9I03 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM CORRECTIVE ACTION No power . • Make sure the AC cord is connected to an AC o[...]

- 27 - EN 9I03 SPECIFICA TIONS GENERAL SPECIFICA TIONS CR T : 13 or 19 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M Closed caption system : §15.1 19/FCC V ideo Heads : Rotary four-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec. T uner channel TV VHF Low : #2~#6 TV VHF High : #7~[...]

- 28 - ES 0I29 CONTROLES DE OPERACIÓN Y SUS FUNCIONES AUDIO EARPHONE VIDEO STOP/EJECT REW PLA Y F.FWD REC/O TR CHANNEL VOLUME POWER 1 9 2 3 4 5 6 7 8 13 10 11 14 12 POWER WAKE-UP /SLEEP 12 3 45 6 78 9 +100 0 EJECT CHANNEL RETURN REW PLAY STOP F.FWD GAME RECORD PAUSE/STILL SPEED SLOW CHANNEL T-PROG. CLEAR COUNTER RESET DISPLAY MUTE MENU VOLUME 3 15[...]

- 29 - ES 0I29 ANT . 28 27 8 Botón de rebobinado (REW)– Púlselo para rebobinar la cinta, o para ver la imagen en retroceso rápido durante el modo de reproducción. (Búsqueda con rebobinado) Botón s – • Púlselo para seleccionar un modo desde un menúpar- ticular . (Por ejemplo: IDIOMA o ADJUST DE USER) 9 Botón de reproducción (PLA Y)?[...]

- 30 - ES 0I29 CONEXIONES DE ANTENA/CABLE ANT. IN OUT Antena de varilla UHF/VHF (incluído para solamente 13”) Antena combinada de VHF/UHF (no incluído) Combinador de VHF/UHF (no incluído) Antena UHF (no incluído) Antena VHF (no incluído) Desde el sistema de Cable Cable coaxial de 75 ohm (no incluído) Caja de CA TV o caja de emi- siones vía[...]

- 31 - ES PREP ARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar . NOT A: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación. 2) Pulse el botón POWER para encender el televisor/videograbadora. 3) S[...]

LIMITED W ARRANTY FUNAI CORP . will repair this SYL V ANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: PA R TS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. T wo (2) years for Picture T ube. Certa[...]