TANDBERG D13639 инструкция обслуживания

TANDBERG MPS API User Guide TANDBERG D13639 Rev 07 March 2008[...]

TANDBERG MPS API User Guide ii Table of Contents User Guide ..................................................................................................................... ............ 1 1 The TAND BERG API ............................................................................................................. . 1 1.1 Introducti on to XM[...]

TANDBERG MPS API User Guide 1 1 The T ANDBERG API This document is a guide to the API interf ace of the TANDBERG M PS products. All rights reserved. This document contains information that is proprietary to TANDBERG. No pa rt of this publication may be reproduced, stored in a re trieval system, or transmitted, in any form, or by any means, electron[...]

TANDBERG MPS API User Guide 2 1.1 Introduction to XML XML is a markup language for document s co ntaining structured information. All information elements in an XML document are marked by a tag and a correspondin g end- tag. The end-tag has the same name as the tag, but is prefixed with a sla sh, “/”. All tags are put within angular bracket s ([...]

TANDBERG MPS API User Guide 3 Example 1.3 If we now look at the call element for an active call we see that call element contains a large sub-stru cture: <Status> <Call item="1" status="Synced" type="Vtlph" protocol="H323"> <CallRate item="1">768</CallRate> <RemoteNumber i[...]

TANDBERG MPS API User Guide 4 <StopBits item="1">1</StopBits> <Mode item="1">Auto</Mode> </SerialPort> </Configuration>[...]

TANDBERG MPS API User Guide 5 1.2 Introduction to XML Path Language (XPath) XPath is a comprehensive langu age to address data in XML documents. It is though very simple to understand the basi c s. If you are able to spe cify the path to a file on your computer, you are able to specify t he path to an element in a XML stru cture. Example 1.5 Let us[...]

TANDBERG MPS API User Guide 6 Example 1.8 XPath also supports addressing by putting constr ain t s on eleme nt attributes. Let’s go back to the Call element in Example 1.2. The below expression will address the CallRate element of all Synced calls in a system: Status/Call[@status=”Synced”]/CallRate To add more constraints o n element attribut[...]

TANDBERG MPS API User Guide 7 1.3 The TANDBERG XML Engine The TANDBERG XML engine is optimi ze d for advan ced machine-machine interaction between a TANDBERG system and an external contro l appli cation. The main features can be summarized to: • Structuring of information • Addressing using XPath • Feedback 1.3.1 Structuring of Informati on A[...]

TANDBERG MPS API User Guide 8 configuration hierarchie s it wants to monitor by using XPath. The user/control ap plicatio n can therefore limit the amount of information it rece ives from the target system to only those pa rts being of interest for the given application.[...]

TANDBERG MPS API User Guide 9 1.4 The XML Documents 1.4.1 Documents The XML Data in the TANDBERG systems a re divid ed into three main types of documents. The division is based on whether the informatio n is Read Information , Write Information or Read-Write information: 1. Status do cuments ( r) : Documents holding all availabl e Status Informatio[...]

TANDBERG MPS API User Guide 10 <RemoteIPAddress item="1" /> <LocalIPAddress item="1">10.47.8.41:2326</LocalIPAddress> <Encryption item="1" status="On"> <Type item="1">AES-128</Type> </Encryption> <RSVP item="1">Off</RSVP> <RSVPRate i[...]

TANDBERG MPS API User Guide 11 Example 10 From the XML structure below we see that the BaudRate element of SerialPort[1] is configured to 9600 . The BaudRate element references the SerialPortBaudrate element in the ValueSpace document, showing the value domain for this configu ration. <Configuration>> <SerialPort item="1"> [...]

TANDBERG MPS API User Guide 12 <CallRate item="1" required="False" valueSpaceRef="/ValueSpace/Bandwidth"/> <Restrict item="1" required="False" valueSpaceRef="/ValueSpace/OnOff"/> <NetProfile item="1" required="False" valueSpaceRef="/ValueSpace/Netpro[...]

TANDBERG MPS API User Guide 13 Example 14 Below is an example of the Dial comm and, not being accepted by the system: <Command> <DialResult item="1" status="Error"> <Cause item="1">17</Cause > <Description item="1">Too much bandwidth requested</Description > </DialResult[...]

TANDBERG MPS API User Guide 14 1.5 Introduction to TANDBERG XML API Service (TXAS) TXAS is a service provided by TANDBERG units for transmitting and rece iving (transceiving) information encoded in XML format. The API uses HTTP(S) as the transport mech ani sm and connects to the normal web p ort (80). TXAS can be accessed in two ways; bare-bone HTT[...]

TANDBERG MPS API User Guide 15 1.6 Exercises The exercises in this section are b ased on using a TANDBERG 6000 MXP codec and Microsoft Internet Explorer. Some of the exam ples may however also apply to other systems and other browsers. NOTE! Replace the ip address, 10.47.8. 41, in the bel ow exampl es with the ip address of your system. Exercise 1 [...]

TANDBERG MPS API User Guide 16 <SerialPort> <BaudRate>2400</BaudRate> </SerialPort> <Conference> <H263>Off</H263> <Downspeed>Off</Downspeed> </Conference> </Configuration> --- <Command> <Dial> <Number>10.47.8.42</Number> </Dial> </Command> --- <[...]

TANDBERG MPS API User Guide 17 2 The XML-based Advanced Command Line Interface The XML-based Advanced Command Line Interfa ce, XACLI, is a very flexible interface both optimized for machine-machine interacti on and man-machine interaction. It is based on the powerful TANDBERG XML engine and offers many of the same feature s as the T A NDBERG XML in[...]

TANDBERG MPS API User Guide 18 2.1 XACLI 2.1.1 Accessing XACLI XACLI can be accessed through Telne t via the LA N interface or th rough RS-232 by connecting a serial cable to the serial interface co nnector, referred to as the Dataport . 48 Telnet sessions can be active at the same time in addition to the RS-232 con nection. 2.1.2 Root commands For[...]

TANDBERG MPS API User Guide 19 2.1.4 Exposure options By adding an exposure option after the address (XPa t h or SimplePath) expression, the system can be instructed to return only parts of t he information within an element structu re. <root command> <ad dress expression> <exposure option> Supported exposure options: • “-“ [...]

TANDBERG MPS API User Guide 20 Audio (status=Active): Video 1 (status=Active): Video 2 (status=Inactive): / Data (status=Inactive): / Channels 2 (type=Outgoing): Encryption (status=Off): / Audio (status=Active): Video 1 (status=Active): Video 2 (status=Inactive): / Data (status=Inactive): / *s/end Request fo r Call 1 element with exposure option ?[...]

TANDBERG MPS API User Guide 21 2.2 The Status-type root commands – xstatus / xhistory The information accessible through the s e comm and s is the exact same information that is available in the corresponding XML docu ments. To get an overview of accessible top-level el ements within a status-type root com mand, type ? or help after the status-ty[...]

TANDBERG MPS API User Guide 22 o XACLI is using indent spaces to present the data structure o XACLI hides instance num ber ( item number in XML ) of an element if there only exist one instance of a given element o A status top level element starts with “ *s ” Example 2.5 shows XML formatting and XACLI formatting for the same statu s el ement, I[...]

TANDBERG MPS API User Guide 23 2.3 The Configuration-type root commands - xconfiguration/xdirectory The information accessible through the s e comm and s is the exact same information that is available in the corresponding XML docu ments. To get an overview of accessible t op-level configurati on elements, type ? or help after the configuration-typ[...]

TANDBERG MPS API User Guide 24 <configuration-type root command> <address expr> ?/help Example 2.7 User wants to configure IP: xconfiguration ip ? *h xConfiguration IP Assignment: <DHCP/Static> *h xConfiguration IP Address: <IPAddr> *h xConfiguration IP SubnetMask: <IPAddr> *h xConfiguration IP Gateway: <IPAddr> [...]

TANDBERG MPS API User Guide 25 Example 2.9 User wants to set IP assignment: xconfiguration ip assignment: static or xconfiguration ip/assignment: static[...]

TANDBERG MPS API User Guide 26 2.4 The Command-type root commands - xcommand To get an overview of the supported commands within a comm and-type root command, type ? or help after the command-type root com mand. <command-type root command> ? Example 2.10 xcommand ? - User Commands - Boot DuoVideoStart MessageBoxDisplay CallAccept DuoVideoStop[...]

TANDBERG MPS API User Guide 27 Example 2.12 xcommand Dial ? *h xCommand Dial Number(r): <S: 0, 30> SubAddress: <S: 0, 10> CallRate: <1xh221/2xh221/64/128/256... Restrict: <On/Off> NetProfile: <1..6> OK NOTE! Required pa rameters are identified by an “(r)” behind the pa rameter name. 2.4.2 Issui ng a com mand A command[...]

TANDBERG MPS API User Guide 28 Sequence notation <command-type root command> <c ommand> <value> <value>... When using this notation the parameter values must be entered in the seq uence as stated in the help text: Example 2.16 xcommand dial 666 10 128 on Combination A combin ation of mark-up notation and seq uence are also s[...]

TANDBERG MPS API User Guide 29 2.5 XML Output - xgetxml As an alternative to the standard XACLI output format, XML format is supported through the root command xgetxml . xgetxml takes an XPath expressio n as parameter and the elements (or complete document) matching the expression will be returned. Example 2.19 xgetxml status/ip <Status> <[...]

TANDBERG MPS API User Guide 30 2.6 Special Commands In addition to the root commands descri bed ab ove, XACLI support a set of root commands that only applies to the Telnet session or RS232 sessio n from where they are issued . This lets the user/control application individually configure the se ssion(s) in use. Supported special comma nds: • xfe[...]

TANDBERG MPS API User Guide 31 Example 2.21 Exposure options are al so supported together with feedback. User only wants to monitor call setup progression. xfeedback register status/call-- OK xcom dial 10.47.15.127 *s Call 1 (status=EstablOut, type=Vtlph, protocol=H323, direction=Outgoing): *s/end *r Result (status=OK): CallRef: 1 LogTag: 3 *r/end [...]

TANDBERG MPS API User Guide 32 *s/end xcom disc *r Result (status=OK): / *r/end OK NO CARRIER *s Call 1 (status=Disconnected, type=NA, protocol=NA, direction=NA): *s/end When conditional XPath expressio ns are used, the system will provide feedback on all elements within the address the first time the condition is true. Example 2.23 User wants to m[...]

TANDBERG MPS API User Guide 33 Rate: 768 Restrict: Off Encryption (status=Off): / Audio (status=Active): Protocol: G722 Rate: 64 Video 1 (status=Active): Protocol: H263+ Resolution: ICIF Rate: 704 Video 2 (status=Inactive): / Data (status=Inactive): / *s/end …suddenly there is a chan ge in audi o protocol: *s Call 1 (status=Synced, type=Vtlph, pr[...]

TANDBERG MPS API User Guide 34 xpreferences detaillevel <1..2> Most information elements acce ssi ble by t he status-type root commands are defined to be level1 information. However there are some info rmation eleme nts which are defined to be level2 information. When reading status information, only the information element s with a detail le[...]

TANDBERG MPS API User Guide 35 <BaudRate item="1">2400</BaudRate> </SerialPort> </Configuration> xpreferences xmlstatusfeedback <on/off> If xmlstatusfeedback is set to on, all status feedback will be retu rned in XML-format instead of the standard XACLI status format. Example 2.26 XACLI-format: *s Call 1 (sta[...]

TANDBERG MPS API User Guide 36 3 API - Configurations This section gives an overview of the Configuration Informatio n available in the Configuration XML documents ( configuration.xm l / directory.xm l ) and the Configuration root commands ( xconfiguration / xdirectory ) of the XACLI interface. All examples are presented using the st andard XACLI f[...]

TANDBERG MPS API User Guide 37 3.1 configuration.xml – xconfiguration AllowIncomingTlphCall AllowIncomingTlphCall: <On/Off> Conference Conference [1..35] Numbers E164Alia s: <E1 64: 0, 31> Conference [1..35] Numbers PRI: <S: 0, 60> Conference [1..35] Numbers H323ID: <S: 0, 50> Conference [1..35] Numbers SIP URI: <S: 0, [...]

TANDBERG MPS API User Guide 38 ConferenceTemplate [1..10] Entry E xitTones : <On/Off> ConferenceTemplate [1..10] WelcomeMessa ge: <On/Off> ConferenceTemplate [1..10] Legacy Level: <0..15> ConferenceTemplate [1..10] DuoVideo : <On/O ff> ConferenceTemplate [1..10] AudioG72 8: <On/Off> ConferenceTemplate [1..10] Casca din[...]

TANDBERG MPS API User Guide 39 <Off/Normal/High> ConferenceTemplate [1..10] OptimalVideoQu ality : <On/Off> ConferenceTemplate [1..10] EncoderS electionPolicy: <BestBitRate/BestVideoStanda rd/Be stResolution> ConferenceTemplate [1..10] Band widthManagement: <Manual/Auto> ConferenceTemplate [1..10] WebSnapshots: <On/ Off&g[...]

TANDBERG MPS API User Guide 40 H323Gatekeeper [1..2 ] Authentication Pass w ord: <S: 0, 50> HTTP HTTP Mode: <On/Off> HTTPS HTTPS Mode: <On/Off> IPProtocol IPProtocol: <IPv4/IPv6/Both> IP IP [1..2] Address: <S: 0, 15> IP [1..2] SubnetMask: <S: 0, 15> IP [1..2] Gateway: <S: 0, 15> IP [1..2] DNS Server [1..5] [...]

TANDBERG MPS API User Guide 41 ISDNInterfaceCard [1..6] ISDN PRI Interface [1..8] MaxChannels: <1..30> ISDNInterfaceCard [1..6] ISDN PRI Interface [1..8] HighChannel: <1..31> ISDNInterfaceCard [1..6] ISDN PRI Interface [1..8] LowChannel: <1..31> ISDNInterfaceCard [1..6] I SDN PRI Interface [1..8] Search: <High/Low> ISDNInter[...]

TANDBERG MPS API User Guide 42 LoS Polarity: <Positive/Negative> LoS Retry: <0..65535> MCU MCU AdditiveRegEnable: <On/Off> MCU H264: <On/Off> MCU H264RCDO: <On/O ff> MediaBoard MediaBoard [1..12] IP Address: <IPAddr> MediaBoard [1..12] IP SubnetMask: <I PAddr> MediaBoard [1..12] IP Gateway: <IPAddr> M[...]

TANDBERG MPS API User Guide 43 QoS [1..2] Precedence Telephony Signalling: <0/1/2/3/4/5/6/7/Auto/Off> QoS [1..2] Precedence VideoTelephony Audio: <0/1/2/3/4/5/6/7/Auto/Off> QoS [1..2] Precedence VideoTelephony Signalling: <0/1/2/3/4/5/6/7/Auto/Off> QoS [1..2] Precedence VideoTelephony Video: <0/1/2/3/4/5/6/7/Auto/Off> QoS [1[...]

TANDBERG MPS API User Guide 44 SingleNumberDialIn SingleNumberDialIn Activ e: <On/Off> SingleNumberDialIn Numbers ISDN: <S: 0, 60> SingleNumberDialIn Numbers IP: <S: 0, 60> SingleNumberDialIn Numbers H323Alias: <E164 : 0, 31> SingleNumberDialIn Numbers H323ID: <S: 0, 50> SingleNumberDialIn Numbers SIP: <S: 0, 60>[...]

TANDBERG MPS API User Guide 45 Default IpConfe rence: < 0..15> TerminalSyncLossTimer: <5..90> GatekeeperAdhocString : <S: 0, 10> TrafficShaping: <On/Off> OutbandDTMF: <On/Off> LanguageAdmin: <S: 0, 3> LanguageGraphic: <S: 0, 3> DefaultConferenceTemplate: <1..10> Telnet Telnet Mode: <On/Off> * Th[...]

TANDBERG MPS API User Guide 46 3.2 directory.xml – xdirectory LocalEntry LocalEntry [1..250] Name: <S: 0, 48> LocalEntry [1.. 250] Numb er: <S: 0, 60> LocalEntry [1.. 250] SecondNumb er: <S: 0, 60> LocalEntry [1.. 250] SubAddre ss : <S: 0, 60> LocalEntry [1.. 250] CallRate: <1xh221/2xh221/64/128/1 92/256/320/3 84/512/76[...]

TANDBERG MPS API User Guide 47 4 API - Commands This section gives an overview of the su pported system Commands. All examples are presented using the st andard XACLI format.[...]

TANDBERG MPS API User Guide 48 4.1 command.xml – xcommand Boot Command used to reboot the syste m. Parameters: None OK Result parameters: None ERROR Result parame ters: • Cause: <1…> Cause code specifying why the comman d wa s not accepted by the system • Description Textual description of the cause code. Example: xcommand boot *r Res[...]

TANDBERG MPS API User Guide 49 • Cause: <1…> Cause code specifying why the comman d wa s not accepted by the system • Description Textual description of the cause code. Example: xcommand callmute call:2 mode:on *r Result (status=OK): *r/end OK CallMuteOutgoing Command used to mute outgoing audio from a specific call. Parameters: • Cal[...]

TANDBERG MPS API User Guide 50 CallMuteVideo Command used to mute incoming video from a spe cific call. Parameters: • Call(r): <1..128> Reference to the call to be muted or unmuted. • Mode(r): <On/Off> Denotes whether video is to be muted or unmuted. OK Result parameters: None ERROR Result parame ters: • Cause: <1…> Cause [...]

TANDBERG MPS API User Guide 51 • EntryExitTones: <On/Off> • LegacyLevel: <0..15> • TelephoneFilter: <On/Off> • FloorToFull: <On/Off> • BandwidthThreshold: <64/128/192/256/320/384/512/76 8/1152/1472/1920> • WebCallListTimeout: <On/Off> • PhoneIndication: <On/Off> • SpeakerIndication: <On/O[...]

TANDBERG MPS API User Guide 52 • AudioG728: <On/Off> • CascadingPreference: <Auto/Ma ster/Slav e> • BillingCode: <S: 0, 16> • CPAutoS witch: <0..60> • NetworkId: <1..32> • ConferenceSelfvie w: <On/Off> • Protect: <On/Off> • TemplateReference: <1..10> • HDEnabled: <On/Off> OK Re[...]

TANDBERG MPS API User Guide 53 • Description Textual description of the cause code. Example: xcommand conferencestart conference:1 *r Result (status=OK): *r/end OK ConferenceStop Command used to stop a conference. All active call s must be disconnected prior to stopping the co nference. Parameters: • Conference(r): <1..35> OK Result param[...]

TANDBERG MPS API User Guide 54 *r/end OK DefaultValuesSet Command used to reset co nfiguratio ns to default values. Parameters: • Level: <1..3> Configurations are divided into three different storage classes. The level parameter den otes that configurations on this level and all levels below are to be reset. OK Result parameters: None ERROR[...]

TANDBERG MPS API User Guide 55 OK DialGroupEntry Command used to dial an entry from th e Grou p Directory. Dialing from the Group Directory makes it possibl e to se t up a MultiSite conference in one operation. Parameters: • Conference(r): <1..35> • GroupEntryId(r): <1.. 16> Reference to the directory entry to be dialed. OK Result p[...]

TANDBERG MPS API User Guide 56 • Cause: <1…> Cause code specifying why the call wa s not accepte d by the system • Description Textual description of the caus e code. DialLocalEntry Command used to dial a number from the locally stored dire cto ry. Parameters: • Conference(r): <1..35> • LocalEntry I d(r): <1..9 9> Refere[...]

TANDBERG MPS API User Guide 57 accepted by the system • Description Textual description of the cause code. Example: xcommand disconnectgwcall gatewaycall:1 *r Result (status=OK): *r/end OK FeedbackDeregiste r Command used to deregist er XML feedback over HTTP(S). Parameters: • ID: <1..3> ID for the registration to deregister. OK Result pa[...]

TANDBERG MPS API User Guide 58 *r/end OK FloorToSite Comm and u sed to assign floor to a specific site in a conference. Parameters: • Conference(r): <1..35> • MCUID(r): <1..191 > M CUID to the MultiSite the site is connected to. • TerminalID(r): <1..191> The site’s terminal id, referenced to the MultiSite it is connected t[...]

TANDBERG MPS API User Guide 59 • GroupEntryId: <1..16> Reference to the Group Directory position the entry is stored. ERROR Result parame ters: • Cause: <1…> Cause code specifying why the comman d wa s not accepted by the system • Description Textual description of the cause code. Example: xcommand groupentryadd name:”The Team[...]

TANDBERG MPS API User Guide 60 • Window(r): <1..16> • CallID(r): <1..176> Call. ERROR Result parame ters: • Cause: <1…> Cause code specifying why the comman d wa s not accepted by the system • Description Textual description of the cause code. LocalEntryAdd Command us ed to add a new entry to the locally stored Directory[...]

TANDBERG MPS API User Guide 61 *r Result (status=OK): *r/end OK OptionKeyAdd Comm and u sed to add option key. Parameters: • Key(r): <S : 0, 90> Opt i on key st ring OK Result parameters: None ERROR Result parame ters: • Cause: <1…> Cause code specifying why the comman d wa s not accepted by the system • Description Textual desc[...]

TANDBERG MPS API User Guide 62 ProtectNumberRemove Command used to remove a prote ct num ber. Parameters: • Conference(r): <1..15> Conferen ce to remove number • NetProfile(r): <2..7> Net Profile to remove • Number(r): <S: 0, 60> Number to remov e OK Result parameters: None ERROR Result parame ters: • Cause: <1…> C[...]

TANDBERG MPS API User Guide 63 5 API - S t atus This section gives an overview of the Status Inform ation available i n the Status XML documents (status.xml / history.xml) and the Status root comma nds (xstatus / xhistory) of the XACLI interface. All examples are presented using the st andard XACLI format.[...]

TANDBERG MPS API User Guide 64 5.1 status.xml – xstatus Call [1..160] Top level attributes: • conferenceRef: 1..9 • direction: Incoming/Outgoing • logTag: 1… Unique number identifying the call. This tag can be used to track the call in the call log ( history.xml / xhisto ry ). • protocol: H320/H323 • status: CallIDLE/Dialing/Alerting/[...]

TANDBERG MPS API User Guide 65 LocalIPAddress: "10.47.9.150:2344" Encryption (status=Off): / RSVP: Off RSVPRate: 0 DynamicRate: 157 TotalPackets: 476674 PacketLoss: 1 Jitter: 10 Video 2 (status=Active): Protocol: H263+ Resolution: XGA Rate: 160 RemoteIPAddress: "" LocalIPAddress: "10.47.9.150:2346" Encryption (status=O[...]

TANDBERG MPS API User Guide 66 Conference [1..40] Top level attributes: • status: NotStarted/Started/Activ e Summary: • Includes references to the calls being con ne cted to the conference • DuoVideo status • Includes information about the pictures gene rated by the MultiSite • Cascading status • MCU Site list • On Air information Exa[...]

TANDBERG MPS API User Guide 67 FarTlphEchoSupression: Normal NetErrorHandling: None IPLRRobustMode: Auto FURBlockSites: Auto FURFilterInterval: 3 HDEnabled: Off VoiceSwitchTimeout: 2 OptimalVideoQuality: On/Off EncoderSelectionPolicy: BestBitRate/BestVideoStandard BandwidthManagement: Auto/Manual WebSnapshots: On/Off AutoAspectRatio4x3: Off *s/end [...]

TANDBERG MPS API User Guide 68 Picture: NA CallRef: None Window 6: Picture: NA CallRef: None OutgoingPicture 3 (name=Duo): Layout (type=NA): / PictureModeActual: Full MCUID: 1 CascadingMode: StandAlone MCUSiteList: Site 1: MCUID: 1 TerminalID: 2 Name: "System1" CallRef: 1 Site 2: MCUID: 1 TerminalID: 3 Name: "System2" CallRef: 2[...]

TANDBERG MPS API User Guide 69 PhoneIndication: On SpeakerIndication: On VideoText: On VideoTextTimeout: 5 ChairControl: Off LectureMode: Off Protect: Off VideoCodingMode: Transcoding SecondaryRate: Off FarTlphEchoSupression: Normal NetErrorHandling: None IPLRRobustMode: Auto FURBlockSites: Auto FURFilterInterval: 3 HDEnabled: Off VoiceSwitchTimeou[...]

TANDBERG MPS API User Guide 70 *s/end H323G atekeepe r [1..2] Top level attributes : • status:Required/Disc overing/ Discovered/Authenticating/ Authenticated/Registering/Regis tered/Rejected/Inactive Summary: • Returns H323Gatekeeper status Examples: *s H323Gatekeeper 1 (status=Inactive): / *s/end *s H323Gatekeeper 1 (status=Registered): Addres[...]

TANDBERG MPS API User Guide 71 Example *s MediaBoard 1: TemperatureCelcius: 30 TemperatureFahrenheit: 86 Description: "" IP: Address: "10.47.9.106" SubnetMask: "255.255.248.0" Gateway: "10.47.8.1" V6: Address 1 (type=NA): "" Address 2 (type=NA): "" Ethernet: MacAddress: "00:50:60:00:E[...]

TANDBERG MPS API User Guide 72 SerialNumber: "44a00003" MainBoard: "113637 MCP 820 System Controller" BootSoftware: "PPCBUG" Used: Total: Conference: 2 Telephony: 0 VideoTelephony: 1 BChanPRI: 0 Bandwidth: 384 Gateway: GatewayCall: 0 BChanPRI: 0 MCU: Conference: 2 Telephony: 0 VideoTelephony: 1 Bandwidth: 384 BChanPRI:[...]

TANDBERG MPS API User Guide 73 Channels 22 (type=BChannel, status=Idle): / Channels 23 (type=BChannel, status=Idle): / Channels 24 (type=BChannel, status=Idle): / Channels 25 (type=BChannel, status=Idle): / Channels 26 (type=BChannel, status=Idle): / Channels 27 (type=BChannel, status=Idle): / Channels 28 (type=BChannel, status=Disconnected): Calli[...]

TANDBERG MPS API User Guide 74 CauseLocation: 2 ChannelCause: 17 ConnectionTime: 0 Channels 26 (type=BChannel, status=Disconnected): CallingNumber: "061336971" CauseLocation: 2 ChannelCause: 17 ConnectionTime: 0 Channels 27 (type=BChannel, status=Disconnected): CallingNumber: "061336971" CauseLocation: 2 ChannelCause: 17 Connect[...]

TANDBERG MPS API User Guide 75 State: RedAlarm *s/end ExternalManager *s ExternalManager: Address: "10.47.1.10" Protocol: URL: "tms/public/external/management/SystemManagementServ ice.asmx" *s/end NTP *s NTP: Address: "127.0.0.1" *s/end SIP *s SIP: Mode: On Interface: Server (status=Active): Address: "10.47.8.88&q[...]

TANDBERG MPS API User Guide 76 URI: "" Registration 21 (status=Inactive): URI: "" Registration 22 (status=Inactive): URI: "" Registration 23 (status=Inactive): URI: "" Registration 24 (status=Inactive): URI: "" Registration 25 (status=Inactive): URI: "" Registration 26 (status=Inactive): U[...]

TANDBERG MPS API User Guide 77 Options *s Options: Option 1: Key: "****" Description: "40 video telephony ports + 16 telephony ports." Option 2: Key: "****" Description: "Advanced Video Option on 40 sites." Option 3: Key: "****" Description: "Encryption on 40 sites." Option 4: / Option 5: [...]

TANDBERG MPS API User Guide 78 Option 52: / Option 53: / Option 54: / Option 55: / Option 56: / Option 57: / Option 58: / Option 59: / Option 60: / Option 61: / Option 62: / Option 63: / Option 64: / *s/end[...]

TANDBERG MPS API User Guide 79 5.2 history.xml – xhistory Call [1..96] Top level attributes: • type: Tlph/Vtlph • protocol: H320/H323/SIP • direction: Incoming/Outgoing • PartOf: Conference/Gate wayCall Summary: • Returns information about discon ne cted calls Examples: *l Call 1 (type=Vtlph, protocol=H323, direction=Outgoing, PartOf=Co[...]

TANDBERG MPS API User Guide 80 5.3 Event.xml – xevent AuthenticationFailure *e AuthenticationFailure: Service: / RemoteIPAddress: / Uptime: / *e/end CallFURErrorAlert *e CallFURErrorAlert: FURAlert: / Rate: / CallRef: / LogTag: / ConferenceRef: / ConferenceLogTag: / *e/end CallMovedFromReception *e CallMovedFromReception: CallRef: / LogTag: / Con[...]

TANDBERG MPS API User Guide 81 Incoming: Audio: TotalPackets: / PacketLoss: / PacketsDropped: / MaxJitter: / Video: TotalPackets: / PacketLoss: / PacketsDropped: / MaxJitter: / *e/end CallSuccessful *e CallSuccessful: CallRef: / LogTag: / ConferenceRef: / ConferenceLogTag: / ServiceType: / Protocol: / Direction: / CallRate: / RemoteNumber: / Encryp[...]

TANDBERG MPS API User Guide 82 *e/end H320Stat istics *e H320 Statist ics: CallRef: / LogTag: / ConferenceRef: / ConferenceLogTag: / Duration: / FramingLoss: Last: / Total: / BondingReSync: Last: / Total: / *e/end SystemActiv ity *e SystemActivi ty : Service: / RemoteIPAddress: / Uptime: / Description: / *e/end[...]