Teac 9A10490600 инструкция обслуживания

9A10490600 DAB/AM/FM Ster eo T uner OWNER’S MANUAL Z T - H300D ABmk # Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 2 Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connection . . . . [...]

2 Before Use Read this before operation < As the unit may become warm during operation, always leave sufficient space around the unit for ventilation. < The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. < Choose the installation loc[...]

3 CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. Connection REMOTE CON[...]

4 Connecting Antennas (AM/FM) FM Outdoor Antenna In an area where FM signals are weak, it will be necessary to use an outdoor FM antenna. Generally, a 3-element antenna will be sufficient; if you live in an area where the FM signals are particularly weak, it may be necessary to use one with 5 or more elements. < Disconnect the FM indoor antenna [...]

5 DAB Indoor Antenna Connect the T-type DAB antenna to the DAB socket, extend the lead vertically and attach it to a window frame or wall with thumbtacks, or the like, where reception is best. DAB Outdoor Antenna In an area where DAB signals are weak, it will be necessary to use an outdoor DAB antenna. There are two main types available. Dipole: Fo[...]

6 Names of Each Control STANDBY/ON Press this button to turn the unit on or standby. The standby indicator lights when the unit is in the standby mode. When the unit is turned on, it goes off. < If the T-H300DABmk III is connected to the A-H300mk III with a remote control cord, you can switch ON/standby both the A-H300mk III and the T-H300DABmk [...]

7 The following screen will display for 2 seconds. The unit will scan for broadcast services in the local area and add them to the channel list as they are found. The scan should take about 10 seconds. As channels are added to the channel list the number of channels found is displayed. After broadcast services have been found the channels are liste[...]

8 < To display the signal strength of a channel, press the ENTER button again. The signal strength is display. Press the ENTER button once again to cancel the signal strength display. < Channels are displayed in alphanumeric order in the channel list, with numbers coming first. So, stations such as 6 Music from the BBC will be listed early in[...]

9 Using Function Control 1 In DAB mode, use function control to set system options. There are 6 options in the function control. Station order Signal error rate Preset tune Software version DRC value Manual tune Station order Use station order to set the order in which stations are listed. There are four orders: Favourite, Alphanumeric, Active and [...]

10 Sw version (Software version) This option shows the version number of the installed software. This is for information only and no adjustment is available. While listening to a DAB broadcast press the FUNCTION/FM MODE button. Turn the TUNING/SELECT knob until ‘Sw version’ is displayed in the second line of the display. 2 1 Preset tune Use thi[...]

11 DRC value This option sets the Dynamic Range Control (DRC) value to be applied to received broadcasts. DRC is used to reduce the range between high and low volumes of audio and is sometimes applied at the broadcast source. Pop music may have a high value of DRC applied, appropriate for constantly high listening levels, while classical music broa[...]

12 Changing Display Settings You can choose the type of information displayed in the second line of the display while listening to a DAB channel. Each time the INFO/RDS MODE button is pressed, the information is displayed as follows. Bitrate mode This displays the bitrate of the current playing broadcast. DLS Programme type Multiplex name Date and [...]

13 Manual tune Auto tune Preset tune Listening to FM/AM Select AM or FM by pressing the BAND button. 1 Stereo: FM stereo broadcasts are received in stereo and the ‘STEREO’ is displayed. Mono: To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise. FUNCTION/FM MODE Button Pres[...]

14 Preset T uning Select DAB, AM or FM by pressing the BAND button. 1 Tune the station you would like to store. Press the MEMORY button briefly. 3 2 Within 4 seconds, select the preset you would like to use for this station using the TUNING/SELECT knob. 4 Within 4 seconds, press the MEMORY button. 5 < If you don’t press the memory button withi[...]

15 < Preset channels can also be selected by the numeric buttons of the remote control unit provided with A-H300mk III . < When using the remote control unit, you can skip step . 2 Select AM or FM by pressing the BAND button. 1 Press the MEMORY button for more than 3 seconds. 2 Up to 30 of the best received stations in your area will be store[...]

16 RDS The Radio Data System(RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. Tune in an FM station (see steps to of page 13). Press the RDS MODE button. Each time the RDS MODE button is pressed briefly, the RDS mode is cha[...]

17 PTY Search You can search for stations by programme type. Select FM by pressing the BAND button. 1 Press the INFO/RDS MODEbutton for more than 3 second. 2 Select the desired programme type (PTY) by turning the TUNING/SELECT knob. 3 Select your desired one from among 31 kinds of PTY programmes. The programme type will blink. Press the ENTER butto[...]

18 Sleep Timer This function is available only when the T-H300DABmk III (tuner) is connected to the A-H300mk III (amplifier) with a remote control cord. Use the remote control unit provided with A-H300mk III . The power can be switched off after a specified amount of time. Press the SLEEP button repeatedly until desired time appears on the display.[...]

19 ‘C-time’ (current time) appears on the display, and the ‘hour’ value blinks. < You cannot adjust the clock when the unit is in the standby mode. < When no action is taken for 60 seconds, the time setting mode will be cancelled. < The unit uses the 24 hour ‘military’ clock. Turn the TUNING/SELECT knob to set the current hour.[...]

20 < Adjust the clock before setting the timer. < When no action is taken for 60 seconds, the timer setting mode will be cancelled. Press the DAILY button. 1 The ‘minutes’ value blinks. ‘Off time’ appears on the display, and the ‘hour’ value blinks. ‘On time’ appears on the display, and the ‘hour’ value blinks. Setting the[...]

21 How to Reset the Settings to the Factory Defaults ‘Factory reset...’ appears on the display, and all the settings is reset to the default settings. If the power supply is interrupted for 14 days or longer, all the settings kept in memory (such as preset stations and timer settings) will be erased. It will take more than 3 days after plugging[...]

22 T roubleshooting If you experience any problems with the unit, please take a moment to look through this chart and see if you can solve the problem yourself before you call your dealer or a TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if [...]

23 Specificatioins FM Tuner Tuning range . . . . . . . . . . 87.50 - 108.00 MHz (50 kHz steps) Signal-to-Noise ratio . . . . . . . . . . . . . . . . . . . . . 65 dB (Mono) 60 dB (Stereo) AM Tuner Tuning range . . . . . . . . . . . . . . 522 - 1620 kHz (9 kHz steps) Signal-to-Noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 dB DA[...]

Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California 90640 Phone: (323) 72[...]