Toshiba 47L7200U инструкция обслуживания

GMA300007012 4/12 Note: T o display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Defini tion TV broadcast, a High Definition digit al cable program, or a High Definition digit al sate llite program). For d etails, contact your TV antenna inst aller , cable provide r , or satellite provi[...]

2 Dear Customer , Thank you for purchasing this T oshiba LED TV . This manual will help you use the many exciting features of your new LED TV . Before operating your LED TV , carefully read this manual completely . WARN ING T o prevent injury , this apparatus must be securely attach ed to the floor/wall in accordance with t he installat ion instruc[...]

3 Important Safety Instructions 1) Read these instructions . 2) Keep these instructions . 3) Heed all war nings . 4) Follow all instru ctions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth . 7) Do not block any ventilation openings . Install in accordance with the manufacture r ’s instructions. 8) Do not install near any[...]

4 24) When selecting a locati on for the TV , • N EV ER allow any part of the TV to hang over the edge of the suppor ting furniture, • N EV ER place the TV on tall furniture (f or example, ente rtainment cen ters or bookca ses) without anchoring both the fu rniture and the TV to a suitabl e support, • Never place cloth or other material betwe[...]

5 38) WA R N IN G : RISK OF ELECTRIC SHOCK! Never spill liquids or push objects of any kind into the TV cabinet slot s. 39) During a lightening storm, do not touch the connecting cabl es or prod uct. 40) For added protecti on of your TV from l ightning and power surges, always unplug the power cord and disconnect the antenn a from the TV if you lea[...]

6 Removing the Pedest al St and 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand prot rud ing over the edge of the surface. Note : Extreme care sh ould always be used when removing the pedest al stand to avoid damage to the LCD pa nel. 2) Remove the scr ews shown in the belo w[...]

7 • Due to the possible im pa ct on vision developm ent, viewers of 3 D video im ages shoul d be age 6 or above. Children and teenagers may be more suscep tible to health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without rest. • Watching TV while sittin g too close to the screen for an exte[...]

8 FCC Radiation Exposure Statement : This equipment complies with FCC radiat ion exposure limits set forth for an uncon tro lled environment. This equipment should be inst alle d and operated with minimum distance 20cm between the radiator & your body . Canada - Industr y Canada Statement This device complies with RSS-210. Operation is s ubject[...]

9 T rademark Information • Cinema Se ries, C learScan , ColorS tream, Dynalight, GameTimer , Native Mod e, Surflock, and Trivector are trademarks or reg istered trademar ks of T oshiba Amer ica Information Systems, Inc. and/or T oshiba Corporat ion. • Android and Googl e Play are tr ademarks o f Google Inc. • Audyssey EQ® provides clear , ac[...]

10 Copyright This guide is copyrighted by T oshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of T os hiba. No patent liability is assumed, however , with respect to th e use of the information contained herein. ©2012 by T os[...]

11 Contents Chapter 1: Introduction ... ......................... ..................... ............. 20 Features ..................................................................21 Overview of installation, setup, and use ..................22 TV front and side panel controls & connections .....23 Front panel ..................................[...]

12 Contents LAN cable ..........................................................29 About the connection illustrations ....................30 Connecting an antenna, satellite receiver, and cable TV box ..............................................30 Connecting DVD to ColorStream ® or VCR to composite video .........................................[...]

13 Contents Chapter 4: Initial Setup an d Menu .................... ........................ 51 Initial setup ............................................................. 51 Performing the initial setup ............................... 52 IR Blaster Setup ......................................................55 Network Setup .......................[...]

14 Contents Setting the 3D PIN code .......................................... 81 Enter a new PIN code ........................................ 81 Change or delete your PIN code ........................82 Forgotten PIN codes .........................................82 Setting the 3D start message ............................ 82 Setting the 3D Lock [...]

15 Contents Controlling HDMI ® CEC playback devices .........98 HDMI ® CEC Control input source selection .....100 Adjusting the amplifier’s audio ........................ 100 Other HDMI ® CEC Control functions ............... 101 Using the HDMI® RGB Range feature .................. 101 Viewing the HDMI® signal information ................10[...]

16 Contents DynaLight ® ......................................................118 Static Gamma ................................................. 118 ClearScan ® .............................................................................................. 118 Cinema Mode ..................................................119 MPEG NR ..............[...]

17 Contents Wireless Setup ................................................131 Advanced Network Setup ................................136 DNS Setup ......................................................137 Network Connection Test ................................139 Using the software keyboard ................................139 Enter text using the[...]

18 Contents Chapter 9: Apps Collabora tion ........................ ........................ 171 Using Apps on a Tablet or Smartphone ................ 171 Apps Control Profile .............................................. 172 Initial setup ........................................................... 173 Toshiba A/V Remote App ......................[...]

19 Contents Video/audio terminals ........................................... 188 Video/audio input ............................................188 ColorStream® (component video) HD input ... 188 HDMI® input .................................................. 188 Digital audio output .........................................188 PC input ..........[...]

20 Chapter 1 Introduction Safety icons This manual contains safety instructions that must be observed to a void potential hazards that could result in personal injuri es, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight th ese instructions as follows:[...]

21 Introduction F eatur es Features ❖ Integrated digital tuning (8VSB A TSC and QAM) — Eliminates the n eed for a separate d igital con verter set-top box (in most cases). ❖ 1920 x 1080 output resolution . ❖ Fo u r H D M I ® —Digit al, High-Definition Multimedia Interfaces with 1080p inpu t support ❖ HDMI ® capabilities ARC (A udio Re[...]

22 Introd uction Overview of installation, setup, and use ❖ 3D capability —Allows you to vie w and experience 3D content on the tele vision while using special glasses. ❖ ENERGY ST AR ® qualified Overview of installa tion, setup, and use Follo w these steps to set up you r TV and begin using its many exciting features. 1 Carefully read the i[...]

23 Introduction TV fr ont and side panel con tr ols and connections on, unplug the power cords for a fe w seconds and then plug them in and try again. 9 See “Navigating the menu system” on page 61 for a quick ov erview of na v igating the TV’ s menu system. 10 Program channels into the TV’ s channel memory , see “A u t o T uning” on pag[...]

24 Introd uction TV bac k panel contr ols and con nections 5 IR Blaster OUT —Used to connect and control infrared remote-controlled devices. 6 Digital A udio Jack —Opti cal audio output in Dolby ® Digital or PCM (pulse-code modulation) format for connecting an external Dolby ® Digital decoder , amplifier , A/V receiver , or home theater syste[...]

25 Introduction TV bac k panel contr ols and con nections Back panel controls 1 PO WER —T urns the TV On and Off . 2 VO L + - —Adjusts the volume le vel. When an on-screen menu appears, these keys function as ( / ) menu navigation buttons. 3 CH Up/Down arrow b uttons —Changes the channel. When an on-screen menu appears, these b uttons functio[...]

26 Introd uction TV bac k panel contr ols and con nections 15 Analog A udio OUT —Analog audio outputs fo r connecting an audio amplifier . 16 Digital A udio OU T —Optical audio outp ut in Dolby ® Digital or PCM (pulse-code modulation) format for connecting an external Dolby ® Digital decoder , amplif ier , A/V receiver , or home theater syste[...]

27 Chapter 2 Connecting Y our TV Overview of cable types Before purchasing cables, know the connector types your de vices require. Y ou can purchase cables from most stores th at sell audio/video devices. Coaxial cable (F-type) (Sample Illustration) Coaxial cable Coaxial (F-type) cable connects you r antenna, cable TV service, and/or cable con vert[...]

28 Connecting Y our TV Overview of cable types video, red for stereo right audio, and white for stereo left (or mono) audio. Component video cables (red/green/blue) (Sample Illustration) Componen t video cables Component video cables come in sets of three and are for use with video devices with component video outpu t. (ColorStream ® is T oshiba?[...]

29 Connecting Y our TV Overview of cable types Dual-wand IR blaster cable Connect the dual-wand IR blaster cable to the IR blaster terminal to control infrared remote cont rolled devices from the TV . Optical audio cable (Sample Illustration) Optical audio cable Optical audio cable connect s recei vers with Dolby ® Digital or PCM (pulse-code modul[...]

30 Connecting Y our TV Connecting an anten na, satellite r eceiver , and cable TV box Crossov er LAN cable connects the TV directly to a computer , see “Connecting the TV directly to a computer wit hout an Internet connection” on page 42 . About the connection illustrations Y ou can connect different types and brands of devices to your TV in se[...]

31 Connecting Y our TV Connecting D VD to ColorStream ® or VCR to composite video T o view the VCR or camcorder video: T urn On the VCR or cam corder video. Select VIDEO input source on the TV .* *T o select the video inpu t source, press the INPUT button on the remote control, see “Selecting the video i nput to view” on page 86 . The unauthor[...]

32 Connecting Y our TV Connecting r emote IR devices ❖ If your D VD player or sa tellite recei ver does not hav e component video, connect a standard A/V cable to the A UDIO/VIDEO termin al. If your D VD player has HDMI ® video, see “Connecting an HDMI® or D VI device to the HDMI® input” o n page 35 . When you use ColorStream ® HD or Vide[...]

33 Connecting Y our TV Connecting r emote IR devices ❖ Dual-wand IR blaster cable (see “Dual-wand IR blaster cable” on page 29 ) ❖ Other cables as required to connect the device(s) to the TV (see “Overvie w of cable types” on page 27 ) See the remote I R blaster setup section . T o connect the IR blaster cable: 1 Locate the infrared sen[...]

34 Connecting Y our TV Connecting a digital audio system T o control the device(s): Point the TV remot e control toward the front of the TV and press the button for the desired function. The signal passes from the remote control throug h the TV to the device via the IR Blaster cable. For more information, see “IR Blaster Setup” on page 55 . (Sa[...]

35 Connecting Y our TV Connecting an HDMI® or D VI device to the HDMI® input use with an external Dolby Digital decoder or other external audio system with optical audio input. Y ou will need an Optical audio cable (Use an optical audio cable that has the larger “T osLink” connector and not the smaller “mini-optical” connector .) (Sample [...]

36 Connecting Y our TV Connecting an HDMI ® or D VI device to the HDMI® input uncompressed digital video from a D VI (Digital V isual Interface) source de vice. This input is designed to accept HDCP (High- Bandwidth Digital-Content Pro tection) program ma terial in digital for m from EIA/CEA-861-D– compliant[1] co nsumer electronic de vices (su[...]

37 Connecting Y our TV Using the TV r e mote and HDMI® CEC Contr ol to contr ol other more information, see “Selecting the video input to vi e w ” on page 86 . T o connect a DVI de vice, you will need : ❖ HDMI ® to D V I adapter cable For proper operation, the length of an HDMI ® to D VI adapter cable should not exceed 9.8 ft (3m). The rec[...]

38 Connecting Y our TV Connecting an HDMI ® audio system T o connect an audio receiv er and playback devices, you will need HDMI ® cables, see “HDMI ® cable (with HDMI Logo)” on page 28 . If several devices are connected, HDMI ® CEC Control feature may not operate properly , see “HDMI ® CEC Control input source selection” on page 100 .[...]

39 Connecting Y our TV Connecting a computer Y ou will need and HDMI ® cable. (Sample Illustration) L6200U/L7200U Series— Connecting to HDMI ® ARC HDMI ® 's ARC (Audio Return Channel) feature This feature enables the audio signal of the TV to be sent to an A V amplifier via the HDMI ® cable. It will not be necessary to connect a cable fr[...]

40 Connecting Y our TV Connecting a computer Connecting a computer to t he TV’ s PC IN terminal: When connecting a computer to the PC IN terminal on the TV , use an analog RGB (15-pin) computer cable and a PC audio cable. For more information, see “Overvie w of cable types” on page 27 . (Sample Illustration) L6200U/L7200U Series—Con necting[...]

41 Connecting Y our TV Connecting a computer ❖ The PC audio input terminal on the TV is shared with the HDMI 4 and ColorStream ® HD2 terminal. For configuration information, see “Setting the computer audio” on page 103 . ❖ Some computer models cannot be connected to this TV . ❖ If the computer has a compatible mini D-sub15-pin terminal, [...]

42 Connecting Y our TV Connecting to a home net work For more information, see “Overvie w of cable types” on page 27 . (Sample Illustration) L6200U/L7200U Series—Con necting to an HDMI ® terminal The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60H z), 720p (60Hz), 1080i (60H z), and 1080p (24Hz/60Hz). For sign[...]

43 Connecting Y our TV Connecting to a home network Connecting the TV directly to a com puter without an Internet connection Y ou will need a Crossover LAN cable. (Sample Illustration) L6200U/L7200U Series—Con necting a computer without Internet connection Connecting the TV to a home netwo rk without an Internet connection Items needed: ❖ Stand[...]

44 Connecting Y our TV Connecting to a home net work Connecting the TV to a home network with an Internet connection - wired Items needed: ❖ Coaxial or telephone cable (dependin g on your modem type) ❖ Standard LAN cables ❖ Router with Hub ❖ Modem (DSL or cable) (Sample Illustration) L6200U/L7200U Series—Con necting with Internet connecti[...]

45 Connecting Y our TV Connecting to a home network ❖ W ireless LA N access point or wireless router ❖ Modem (DSL or cable) (Sample Illustration) L6200U/L7200U Series—Con necting with Internet connection - wireless The transmission speed ov er th e wireless LAN and the distance ov er which wireless LAN can reach may va ry depending on surroun[...]

46 Chapter 3 Using the Remote Control Controlling other devices The TV’ s remote control can operate other de vices as described in the IR Blaster section on page 55 . Installing batteries T o install batteries: 1 Pull up to o pen the cover . (Sample Illustration) Removing the battery cover 2 Install two AA size batteries.[...]

47 Using the Remote Control Installing batteries Use carbon zinc batteries or alkaline batteries. (Sample Illustration) installing th e batteries 3 Slide on the cover . Do not expose batteries to excessive heat such as s unshine, fire, etc. ❖ Every time you change the batteries, you must reprogram the remote. ❖ Dispose of batteries in a designa[...]

48 Using the Remote Control Remote contr ol effective range Remote control effective range 1 For optimum performance, aim th e remote control directly at the TV and make sure there are no obstructions between the remote control and the TV . (Sample Illustration) Re mote contr ol effective r ange 16.4 ft (5m) 42/47/55”[...]

49 Using the Remote Control Learning about the remote contr ol Learning about the remote control Only the buttons used to operat e the TV are described in this section. For the HDMI ® CEC Control functions, see “Using HDMI ® CEC Control” on page 97 . (Sample Illustration) Re mote contr ol overview The L6200U series remote has no LIGHT button.[...]

50 Using the Remote Control Learning about the r emote contr ol The error message “NOT A V AILABLE” may appear if you press a key for a function that is not available. NOTE 1 POWER button T u r n s the TV On and Off. When the TV i s on, the powe r LED indi c ato r on the TV f r ont glow s g r een. 2 3D button A cc e ss e s the 3D option s . 3 L[...]

51 Chapter 4 Initial Setup and Menu Initial setup When you f irst turn on or reset the TV , th e Initial Setup win dow appears. ❖ Y ou can stop Initial Setup by pressing the EXIT button. However , if you do not finish Initial Setup, the Initial Setup screen will appear every time you turn on your TV . T o finish Initial Setup, see “Changing ini[...]

52 Initial Setup and Menu Initial setup Performing the initial setup 1 Menu Language/Country Select a language and country . Press OK . (Sample Illustration) Selecting Menu Language/Country 2 Time Zone Select a time zone. (Sample Illustration) Selecting T ime Zone 3 Daylight Sa ving Time Select On or Off . Press OK . (Sample Illustration) Selecting[...]

53 Initial Setup and Menu Initial setup 5 ANT/CABLE T o select Antenna , first select Antenna . Then select Next. (Sample Illustration) Selecting Antenna T o select Cable , first select Cable . Then select Next . (Sample Illustration) Selecting Cable If you do not want to scan channels, you do not need to make a selection for ANT/CABLE. Select Next[...]

54 Initial Setup and Menu Initial setup While scanning is in progress, the Auto T uning Progress Screen appears. (Sample Illustration) Auto T uning Pr ogress Scr een After scanning is complete, the auto tuning results screen (such as the one below) will appear . Press OK or EXIT . (Sample Illustration) Auto T uning Results screen Although they may [...]

55 Initial Setup and Menu IR Blaster Setu p 4 Scan again. IR Blaster Setup During the Initial Setup, the IR B laster screen will appear with the message, “IR Blaster setup will no w begin. If you wish to skip, please select Skip. ” T o start the IR Blaster setup, select Next on the screen, or to skip the setup, select Skip . If you wish to skip[...]

56 Initial Setup and Menu IR Blaster S etup If a model has more than one Code Set, a message will appear stating “This model has more than one Code Set. Please select and test your preferred Code Set.” Y ou will need to choose a code set using the ( / arrow) buttons and perform the T est option to ensure the correct Code Set has been selected. [...]

57 Initial Setup and Menu IR Blaster Setu p If Audio is selected as the device type, the volume option is active. However if another device (other than Audio) is selected, then this option is not available and grayed out. 10 After setting up all the options for the device, it is important to test the IR Blaster’ s control of the device by using t[...]

58 Initial Setup and Menu Network Setup ❖ 1 sec 3 Select the Te s t button. A message screen will appear asking you “W as your device changed from one channel to anothe r by the IR blaster? If not, please check your configuration. ” If the test failed, a “T est Failed” message will appear on the screen. 4 Once you ha ve selected all the a[...]

59 Initial Setup and Menu MediaGui de Setup 1 Use the ( / arrow) buttons to select W ired or W ireless network. If you select W ired, proceed to the Network Connection T est (Step 3). If you selected Wi re less network, please proceed to the following step. 2 Using the ( / arrow) buttons, select the type of W irele ss setup option: Easy Setup (WPS)[...]

60 Initial Setup and Menu MediaGuide Setup skip this setup, you can setup the MediaGuide at any time through the setting menu of the MediaGuide application. T o setup your M ediaGuide: When you select Next (as described above) the Connect to the Network screen will appear . 1 Make sure the TV is connected to the network, and then select the Ye s or[...]

61 Initial Setup and Menu Navigating the menu system Support Inf ormation ❖ When the “Support In formation” screen appears, press the OK but t on . Refer to this information if there is a problem and you need to contact Customer Support. T o find help, the following operation can be performed at any time. MENU button > Menu > GET HELP &[...]

62 Initial Setup and Menu Main menu layout Main menu layout T o open the main m enus in the table below , press the MENU button on the remote control or TV control panel . 1st Layer 2nd Layer 3r d Layer P age GET HELP Software Licenses page 141 Software Upgrade page 140 System Information page 107 eMANUAL page 142 3D 3D Auto Start page 81 2D to 3D [...]

63 Initial Setup and Menu Quic k Menu Quick Menu Quick menu helps you access so me options more quickly . Press the QUICK button to display the Quick m enu and press the ( / )buttons to select an option. Quick menu items differ depending on the current mode.  Quick Menu It em P age Picture Mode page 79 3D Settings page 78 HDMI ® CEC P layer Con[...]

64 Chapter 5 Setting up your TV How to navigate the menu ❖ Press the MENU button. Select SETTINGS , Main menu, Submenu, and then press the OK or EXIT button. Changing initial settings From Qu ick Setup: 1 Press the MENU b utton. 2 Select SETTINGS , SETUP , Quick Setup , and then press t he OK button. A confirmation message appears. F ormat: Descr[...]

65 Setting up your TV How to navigate the menu 3 Press the ( / arrow) b ut tons to select Ye s . 4 Press th e OK but to n . T o change settings, see “Initial setup” on p age 51 . Individual settings Menu Language Y ou can choose from three different menu language settings (English, Français, and Español) . The TV display s menus and messages [...]

66 Setting up you r TV How to navigate the menu 3 Press the ( / arrow) b ut tons to select Home . 4 Press the OK b utton. ANT/CABLE In This setting configures the antenna input source for the ANT/CABLE terminal. 1 Press the MENU b utton. 2 Select SETTINGS , SETUP , and then ANT/CABLE In . 3 Select Antenna or Cable and press Next . 4 Select Cable an[...]

67 Setting up your TV How to navigate the menu T o tune to channels not stored in memory , use buttons 0–9 and the DASH button on the remote control. 1 Press the MENU b utton. 2 Select SETTINGS , SETUP , A uto T uning , and then press t he OK button. A confirmation s creen appears. 3 Press th e OK b u tt o n to start Auto T uning or press the EXI[...]

68 Setting up you r TV How to navigate the menu Skipping channels T o prev ent a channel from being viewed, you can set it to be skipped. 1 Press the MENU b utton. 2 Select SETTINGS , SETUP , TV Settings , and then press t he OK button. 3 Press the ( / arrow) b uttons to select C hannel Options , and then press th e OK button. The list of channels [...]

69 Setting up your TV How to navigate the menu 2 Select SETTINGS , PREFERENCES , A V Connection , and then press th e OK button. 3 Press the ( / arrow) b uttons to select Input Labeling . 4 Press th e OK but to n . 5 Press the ( / arrow) b uttons to select the item you wish to skip. Then press the RED button to turn on Skip . T o turn off skip Pres[...]

70 Setting up you r TV How to navigate the menu Labeling video inputs The input labels are shown in the input selector and banner displays. Y ou can label video inpu ts according to the devices you hav e connected to the TV . 1 Press the MENU b utton. 2 Select SETTINGS , PREFERENCES , A V Connection , and then press th e OK button. 3 Press the ( / [...]

71 Setting up your TV How to navigate the menu Auto Input settings options for each MODE SELECT button: The TV mode select button will be restricted to the ANT/CABLE input. T o set Auto Input 1 Press the MENU b utton. 2 Select SETTINGS , PREFERENCES , Mode Select Ke y Setup , and then press t h e OK button. The Mode Select windo w will appear . 3 P[...]

72 Chapter 6 Basic F eatures Viewing 3D images Before using the 3D function, note the fo llo wing: In addition to compatible 3D glasses, vie wing 3D programming requires the following (not included): ❖ Compatible 3D playback device or 3D source. ❖ 3D capable HD M I ® cable. If you wish to obtain extra 3D glasses: T oshiba provides 3D glasses f[...]

73 Basic features V iewing 3D imag es Health precautions: ❖ Due to the possible impact on vision development, viewers of 3D programming should be age 6 or above. Children may be more susceptible to health effects from viewing 3D images and should be closely supervised. ❖ Some viewers may experience a seizure or blackout when exposed to certain [...]

74 Basic features Using 3D functions Watching the TV: ❖ Proper 3D effects or 3D-to-2D conversion results may not be obtained depending on the received 3D conte nt. ❖ 3D effect and image quality may vary depending upon content quality and display device cap ability/ functionality/settings. ❖ Wear the 3D glasses properl y , otherwise you may no[...]

75 Basic features Using 3D functions ❖ In order to switch to 3D, the TV must be receiving a 3D signal. ❖ If appropriate mode and format are not selected, 3D image is not correctly displayed. ❖ If the appropriate 3D mode and format a re not selected, the 3D image will not display correctly . ❖ There are individual differences in perception o[...]

76 Basic features Using 3D functions Switching display mode or selecting 3D format There are four TV viewing modes: 3D signals can be sent in one of three formats: * This format cannot be selected manually . ❖ If the right and left images are the same in Nati ve mode, select SBS. ❖ If the top and bottom images are the same in Nati ve mode, sele[...]

77 Basic features Using 3D functions When viewing 3D mode or 2D to 3D mode, pressing the 3D button changes the viewing mode to Native mode. The 3D mode may not be available with certain features. Switching to 3D mode 1 Set 3D Auto S tart to 3D . 2 Press the 3D b u tton and select 3D while viewing 2D mode or Nativ e mode. * Correct 3D image. HDMI wi[...]

78 Basic features Using 3D functions Selecting 3D format from the Quick menu in 3D mode 1 Press the QUICK button. Select 3D Setting s , and then press the OK button. 2 Press the ( / arro w) buttons to select 3D F ormat Select , and then press the OK button. 3 Press the ( / arrow) b uttons to select Side by Side or To p and Bottom . * Correct 3D ima[...]

79 Basic features Using 3D functions Switching to 2D mode 1 Set 3D Auto S tart to 2D . 2 Press the 3D b u tton while viewing 3D mode. * Correct 2D image. Selecting 2D format from the Quick menu in 2D mode 1 Press the QUICK button. Select 3D Setting s , and then press the OK button. 2 Press the ( / arro w) buttons to select 2D F ormat Select , and t[...]

80 Basic features Using 3D functions * Correct 2D image. T ake off the 3D glasses in 2D mode Switching to Native mode Press the 3D b utto n while viewing 3D mode. Press the 3D b utto n while viewing 2D to 3D mode. When 3D format signal with 3D Auto Detect Information is received, it is not possible to switch to Native. Quick menu in 2D mode 1 Press[...]

81 Basic features Setting the 3D PIN code T o switch 2D to 3D mode ❖ Press the 3D b utton and select 2D to 3D while viewing 2D or Nativ e mode. When using A TV , Video, ColorS tream HD, Internet, or PC, the viewing mode can be changed to 2D to 3D mode by pressing 3D. Setting the auto start mode This controls what the TV does when it detects a 3D [...]

82 Basic features Setting the 3D PIN code the PIN code cannot be set to “0000.” Change or delete your PIN code 1 Press the MENU button. 2 Use the ( / arrow) b uttons to select 3D , and then press the OK button. 3 Press the ( / arrow) b uttons to select 3D PIN . 4 Press the number buttons to enter your 4-digit PIN code. 5 Select Change PIN or De[...]

83 Basic features Setting the 3D PIN code 6 Press the ( / arrow) b ut tons to select On or Off . Setting the 3D Lock When this feature is set to On, you must enter your 3D PIN code t o change the displ ay mode to 3D mode or 2D to 3D mo de. 1 Press the MENU button. 2 Use the ( / arrow) b uttons to select 3D , and then press the OK button. 3 Press th[...]

84 Basic features Setting the 3D PIN code 1 Press the MENU button. 2 Use the ( / arrow) b uttons to select 3D , and then press the OK button. 3 Press the ( / arrow) b uttons to select 3D Safety Settings , and then press the OK b utton. 4 Enter your 4-digit 3D PIN code. 5 Press the ( / arrow) b uttons to select Enable 3D Ti mer . 6 Press the ( / arr[...]

85 Basic features T uning Channels Switching left and right images The left and right images of the glasses can be swapped. If 3D images look blurry , switch the left and right sides of the 3D image. 1 Press the QUICK bu t to n to open the Quick menu. 2 Press the ( / arrow) b uttons to select 3D Settings , and then press the OK button. 3 Press the [...]

86 Basic features Selecting the video input to vie w T o temporarily program the CH R TN b utton with a particular channel: 1 T une to the chann el you wish to program to the CH RTN button. 2 Press and hold the CH R TN button for approximately 4 seconds until the message “Memorized” appears. The channel has been programmed to the CH R TN button[...]

87 Basic features Using closed captions ❖ Y ou can label the video input sources according to the specific devices you have connected to the TV , see “Labeling video inputs” on page 70 . ❖ Y ou can skip sources, see “Skipping video inputs” on page 68 . ❖ Inputs that are set to be skipped will be skipped when selecting by repeatedly pr[...]

88 Basic features Using closed captions T o view captions or text: 1 Press the MENU button. Select SETTINGS , SETUP , TV Settings , and then press the OK button. 2 Press the ( / arrow) buttons to select Closed Captions , and then press the OK button. 3 Press the ( / arrow) b uttons to select Analog CC Mode . T o view captions: Press the ( / arrow) [...]

89 Basic features Using closed captions T o view text: Press the ( / arrow) b uttons to highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Captions - text If text is not available in your area, a black rectangle may a ppear on the screen. Y ou can remove this rectangle by setting Closed Captions Display to Off. A closed caption signal may not b[...]

90 Basic features Using closed captions T o customize the closed captions: 1 Press the MENU button. Select SETTINGS , SETUP , TV Settings , and then press the OK button. 2 Press the ( / arrow) buttons to select Closed Captions , and then press the OK button. 3 Press the ( / arrow) b uttons to select Digital CC Settings . and then press the OK b utt[...]

91 Basic features Using par en tal contr ol s Entering a new PIN code 1 Press the MENU button. Select SETTINGS , PREFERENCES , Paren ta l PI N , and then press the OK button. 2 Use the number buttons to enter a 4-digit number , and then confirm the code. The PIN code cannot be set to “ 0000 ”. Changing or deleting your PIN code 1 Press the MENU[...]

92 Basic features Using par ental contr ols The V-Chip fea ture in this TV supports the U.S. V- Chip system only . 1 Press the MENU button. Select SETTINGS , PREFERENCES , Pare ntal Contr ol and Locks , and then press the OK button. 2 Enter your 4-digit PIN cod e. 3 Press the ( / arrow) b uttons to highlight Enable Rating Blocking . 4 Press the ( /[...]

93 Basic features Using par en tal contr ol s 5 Press the ( / arrow) b uttons to select Edit Rating Limits , and then press the OK button. The Edit Rating Limits screen appears. 6 Select Alt RS , and then press the OK button. The Edit Alternate Rati ngs screen appears. ❖ The Alt RS button is only availa ble if an additional rating system is curre[...]

94 Basic features Using par ental contr ols Independent rating system for movies Indication other than rating system If you place an “X” in the box next to “Rated “None””, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked. TV-PG Parental Guidance Suggest[...]

95 Basic features Locking specif ic channels Displaying ratings T o display the rating of the program you are watching, press the INFO button on the remote control. Unlocking programs If you try to tune to a program that exceeds the rating lim its you hav e set, the TV w ill enter pr ogram lock mode and a warning message will appear on screen. Foll[...]

96 Basic features Locking specif ic channels Locking video inputs Y ou can lock video inputs and channels 3 and 4. Y ou cannot view the input sources or channels until you un lock the inputs by entering the PIN code. 1 Press the MENU button. Select SETTINGS , PREFERENCES , Pare ntal Contr ol and Locks , and then press the OK button. 2 Enter your 4-[...]

97 Basic features Using HDMI ® CEC Contr ol ❖ A message appears when 10 minutes, 3 minutes, and 1 minute are remaining. ❖ If the TV loses power with time remaining, the TV will e nter Input Lock mode when power is restored (as if the GameT imer had been activated). Y ou must deactivate the Input Lock, see “Locking video inputs” o n page 96[...]

98 Basic features Using HDMI ® CEC Contr ol T o set HDMI ® CEC Control Setup 1 Press the MENU button. Select SETTINGS , PREFERENCES , HDMI ® CEC Contr ol Setup , and then press the OK button. 2 Press the ( / arrow) b uttons to highlight Enable HDMI CEC Control . 3 Press the ( / arrow) b uttons to select On . If you set Enable HDMI ® CEC Control[...]

99 Basic features Using HDMI ® CEC Contr ol These functions depend on the connected devices. HDMI ® CEC Player Control menu functions 1 Press the QUICK button to open the Quick men u. 2 Select HDMI ® CEC Player Control , and then press the OK button. 3 Press the ( / arrow) b uttons to select the item you want to control, and then press the OK b [...]

100 Basic features Using HDMI ® CEC Contr ol These functions depend on the connected devices. The HDMI ® CEC Player Control item is not available under the following conditions: ❖ A non-HDMI ® input is selected ❖ The Enable HDMI ® CEC Control item is set to Off ❖ The connected HDMI ® CEC device is not a playback or recording device HDMI [...]

101 Basic features Using the HDMI® R GB Range f eatur e Other HDMI ® CEC Control functions When Enable HDMI ® CEC Control and all it ems in the HDMI ® CEC Control Setup menu are set to On, the fo llo wing functions will b e enabled: When you turn on the amplifier , change its input source, or adjust the sound volume, the sound will be output fr[...]

102 Basic features V iewing the HDMI® signal information If your HDMI ® connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60 Hz, you will need a High Speed HDMI ® cable. Conventional HDMI ® / DVI cables may not work properly with this mode. Select the appropriate HDMI ® input mode ( HDMI 1 , HDMI 2 , HDMI 3[...]

103 Basic features Using your computer with the TV 3 Press the ( / arrow) b uttons to select PC Settin gs , and then press the OK button. If a computer is not connected or there is no PC input signal, this menu will not be available. 4 Press the ( / arrow) b uttons to select an item. 5 Press the ( / arro w) bu ttons to mak e adjustments. The screen[...]

104 Basic features Setting the timer to turn on the TV Setting the timer to turn on the TV Y ou can set the on timer to turn on the TV to a preset channel or input at a preset time. T o activ ate the timer: 1 Press the MENU button. Select TIMERS , On Ti mer , and then press the OK button. 2 Press the ( / arrow) b uttons to select Enable On Timer . [...]

105 Basic features Setting the sleep timer 2 Press the ( / arrow) b uttons to select Enable On Timer . 3 Press the ( / arrow) b uttons to select Off . Setting the sleep timer Y ou can set the TV to turn of f after a specif ic amount of time (maximum = 12 hours). Using the re mote control: 1 Press the SLEEP button. 2 Set the amount of time u ntil th[...]

106 Basic features Setting No Signal P ower Down Setting No Signal Power Down When an input's setting in this feature is set to On, The TV will automatically turn itsel f off after 15 minutes if no signal is detected. Y ou can change each input's setting to Off: ANT/CABLE, V ideo 1, V ideo 2, ColorStream HD 1, ColorStream HD2, HDMI 1, HDM[...]

107 Basic features V iewing support informatio n ❖ Channel Label (if set or recei ved) ❖ Current display mode (Side by Side, T op and Bottom, or Frame Packing) ❖ Current display format (2D to 3D, or 3D to 2D) ❖ Input video format (3D appears when video format is 3D) T o close the screen, press the INFO button again. The follo wing additiona[...]

108 Basic features P ower failur e ❖ Press the ( / arrow) b uttons to select No , and then press the OK button. Power failure If power is lost while you are watching the TV , the Last Mode Memory feature automatically tu rns on the TV when power is restored.[...]

109 Chapter 7 Picture and Sound Controls Selecting the picture size Y ou can view many program formats in se veral picture sizes— Nati ve, 4:3, Full, TheaterW ide 1, TheaterWide 2, TheaterW ide 3, Normal, and Dot by Dot. The picture size illustrations are examples only . The format of the image (in any of the picture sizes) depends on the format [...]

110 Picture and Sound Control s Selecting the pictur e size ❖ Using these functions to change the picture size (i.e., c hanging the height/width ratio) for any purpose other than your private viewing may be prohibited under the Copyrigh t Laws of the United States and other countries, and may subject you to civil and criminal liability . ❖ Ther[...]

111 Picture and Sound Control s Selecting the picture size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display wi th sidebars and/or bars at the top and bottom . Full This setting is for viewing in the 16:9 (480 i, 480p) source pro grams only . (Sample Illustration) Picture size - Full 16:9 If recei ving a squeezed 4:3 fo[...]

112 Picture and Sound Control s Selecting the pictur e size TheaterWide 1 This setting is for viewing in 4:3 format programs. (Sample Illustration) Pict ure size - TheaterW ide 1 The center of the picture remains cl ose to its original propo rtions, but the left and right edges ar e stretched horizontally to fill the screen. TheaterWide 2 This sett[...]

113 Picture and Sound Control s Scr olling the pictur e Normal This setting is for vie wing SVGA, XGA, WXGA, and SXGA sources. (Sample Illustration) Picture size - Normal This size is a non-stretched display . Some input signal f ormats will display with sidebars and/or bars at the top and bottom. Dot by Dot This setting is for vie wing SVGA, XGA, [...]

114 Picture and Sound Control s Using the A uto Aspect featur e 2 Press the ( / arrow) b uttons to select Picture P osition , and then press the OK button. 3 Press the ( / arrow) b uttons to select V ertical P osition . 4 Press the ( / arrow) b uttons to make the appropriate adjustments. The adjustment range is from -5 to +10 . Using the Auto Aspec[...]

115 Picture and Sound Control s Adjusting the pictur e Adjusting the picture Selecting the picture mode Y ou can select your desired picture settings fro m the modes described below . PC mode is available for HDMI ® and PC inputs only (not displayed for other input sources). Game mode cannot be turned on when the ANT/CABLE input, Internet content,[...]

116 Picture and Sound Control s Adjusting the pictur e * Backlight: Adjust s the brightness of th e entire screen. When in video mode and no signal is input, this selection is set to 0. (Sett ings are stored in memory .) Some settings cannot be adjusted in the following cases: ❖ AutoView is selected ❖ TheaterLock is set to On T o adjust the pic[...]

117 Picture and Sound Control s Using the advanced pictur e settings featur es Using the advanced picture settings features Some of the Advanced Picture Settings features will not be available for adjustment when the Picture Mode is set to AutoView . Edge Enhancer The Edge Enhancer feature lets y ou adjust the levels for your desired picture settin[...]

118 Picture and Sound Control s Using the advanced picture settings featur es When the Picture Mode is set to Au toView, the level range is from -5 to +5. DynaLight ® The DynaLight ® feature automatically strengthens the black coloring of dark areas in the video according to the le vel of darkness. 1 Press the MENU button. Select SETTINGS , PICTU[...]

119 Picture and Sound Control s Using the advanced pictur e settings featur es Cinema Mode This feature provides smooth er motion and a cris per image. 1 Press the MENU button. Select SETTINGS , PICTURE , Advanced Pictur e Settings , and then press the OK button. 2 Press the ( / arrow) b uttons to select Cinema Mode . 3 Press the ( / arrow) b utton[...]

120 Picture and Sound Control s Using the advanced picture settings featur es The differences may not always be notic eable. For the best results, use lower settings, as picture quality may be greatly reduced if the setting is too high. If the picture mode is set to Gam e or PC, this feature is not available. Auto Brightness Sensor When the Aut o B[...]

121 Picture and Sound Control s Using the advanced pictur e settings featur es 6 Press the ( / arrow) b uttons to adjust the level. The adjustment range is from 0 to 100. (Sample Illustration) Backlight adjustment window 7 Press the OK but to n to f ix the ad justment. ❖ T o cancel the adjustment when selecting a point, select Cancel on the scree[...]

122 Picture and Sound Control s Setting the expert pictur e settings 3 Press the ( / arrow) b uttons to select a color . Press the ( arro w) button. 4 Press the ( / arrow) b uttons to select Hue , Saturation , or Brightness . 5 Press the ( / arrow) b uttons to adjust the setting. 6 Repeat Steps 3 through 5 to adjust other colors. T o reset the adju[...]

123 Picture and Sound Control s Setting the e xpert pictur e settings 3 Press the ( / arrow) b uttons to select On . 4 Adjust picture settings. When the TV is in 3D mode, this feature is not available. RGB Filter This feature indi vidual ly enables or disables the red, green, and blue components of the pictur e to allow for more accurate adjustment[...]

124 Picture and Sound Control s Locking the pictur e settings Setting T ype Y ou can adjust the white balance setting. 1 Press the MENU button. Select SETTINGS , PICTURE , Expert Picture Settings , and then press the OK b utton. 2 Press the ( / arrow) b uttons to select White Bal ance , and then press the OK button. 3 Press the ( / arrow) b uttons [...]

125 Picture and Sound Control s Adjusting the audio Adjusting the audio Muting the sound Press the MUTE button to partially reduce (1/2 Mute) or turn off (Mute) the sound. E ach time you press the MUTE button, the mute mode changes in the foll o wing order: 1/2 Mu te, Mute, V olume, 1/2 Mute, etc. If the closed caption mode is set to Off when you s[...]

126 Picture and Sound Control s Adjusting the audio Adjusting the range Y ou can adjust bass and treble. 1 Press the MENU button. Select SETTINGS , SOUND , and then Bass or Tr e b l e . 2 Press the ( / arrow) b uttons to adjust the range, and then press the EXIT button. Selecting the optical audio output format Y ou can select the optical audio out[...]

127 Picture and Sound Control s Adjusting the audio Audyssey Premium T elevision™ These televisions use a suite of technologies for better sound including: ❖ Audyssey EQ ® —pro vides clear , accurate and natural sound right out of the box. This technol ogy ensures you enjoy your audio experience as much as your video. ❖ Audyssey ABX ™ ?[...]

128 Picture and Sound Control s Using the surr ound sound feature ❖ If Dynamic Range Control is set to On, this feature is automatically set to Off. ❖ This feature does not affect the audio signal output from the DIGIT AL AUDIO OUT terminal. Audyssey ABX™ Audyssey ABX™ technology uses s ophisticated driv er analysis and low frequenc y monit[...]

129 Chapter 8 Advanced features Using your home network ❖ This TV can share videos, music, and photos across your home network and other connected products throug h the MediaShare feature. In order to do this, you will have to conf igure the network settings on your TV , see “ePOR T AL MediaShare (V ideos, Music, and Photos)” on page 157 . ?[...]

130 Advanced features Using your home network When using a Wireless network connection Wireless LAN and your Health W ireless LA N products, like other radio de vices, em it radio frequency electromagnetic ener gy . Howe ver , the level of ener gy emitted by W ireless LAN devices is much less than the electromagnetic energy emitted by wireless de v[...]

131 Advanced features Setting up the Network Setting up the Network Y ou can select the Network T ype. 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK but to n . 2 Press the ( / arrow) b uttons to highlight Network T ype . 3 Press the ( / arrow) b uttons to select Wired or Wi rel e ss . 4 If you select Wi re d , s[...]

132 Advanced features Setting up the Network 4 Press the ( / arrow) b uttons to select PBC . 5 Press the ( arro w) button to select Start Scan , and then press the OK button. 6 Follo wing the on-screen instru ctions, push the appropriate button on your AP . 7 When a screen reporting th at “the setup has succeeded” appears, press the OK b utton.[...]

133 Advanced features Setting up the Network Assisted Setup 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK b utton. 2 Press the ( / arrow) b uttons to select Wir eless Setup , and then press the OK button. 3 Press the ( / arrow) b uttons to select Assisted Setup , and then press the OK button. 4 Press the ( / arr[...]

134 Advanced features Setting up the Network 4 Press the ( / arrow) b uttons to select Network Name , and then press the OK button. The Software K eyboard window appears. 5 Input the Network Name using the Software Ke y board. For more information, see “Using the software k eyboard” on page 139 . 6 T o sav e your settings, p ress the BLUE butto[...]

135 Advanced features Setting up the Network Settings are not saved if the BACK button is pressed be fore Done is selected. Wireless Information The settings configured in Wireless Setup can be confirmed. 1 Press the QUICK button. Select Wir eless Inf ormation , and then press the OK button. 2 Press the RED b utto n to check the av ailability of su[...]

136 Advanced features Setting up the Network Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or TKIP , the Speed value might be low . We recommend that the Encryption setting are changed to AES (Under manual setup). Advanced Network Setup ❖ When the DHCP function of the router connected to this TV is On, you can set Auto Setu[...]

137 Advanced features Setting up the Network 2 Press the ( / arrow) b uttons to select Advanced Netw ork Setup , and then press the OK b utton. 3 Press the ( / arrow) b u ttons to select IP Addres s Setup , and then press the OK button. 4 Select A uto Setup . Press the ( / arrow) b uttons to select Off . 5 Press the ( / arrow) b uttons to highlight[...]

138 Advanced features Setting up the Network 2 Press the ( / arrow) b uttons to select Advanced Netw ork Setup , and then press the OK b utton. 3 Press the ( / arrow) b uttons to select DNS Setup , and then press the OK button. 4 Select Au t o S e t u p . Press the ( / arrow) b uttons to select On. Other items are grayed out when Auto Setup is set [...]

139 Advanced features Using the softwar e keyboar d 3 Press the ( / arrow) b uttons to select MA C Address , and then press the OK button. Network Connection T est This function checks Internet connectivity . 1 Press the MENU button. Select NETWORK > Network Setup , and then press the OK b utton. 2 Press the ( / arrow) b uttons to select Network[...]

140 Advanced features P erforming a Software Upgrade 3 Repeat Step 1 and 2 until you have entered all desired text. 4 Press the BLUE button to sa ve your settin gs and return to the pre vious screen. If the BACK button is pressed, changes are not saved and the software keyboard window is closed. Input operation on the remote control : Performing a [...]

141 Advanced features V iewing the Softwar e Licenses ❖ Y ou will not be able to use the TV set while performing the upgrade. ❖ Do not turn off the TV during the upgrade. ❖ By upgrading, the factory default values may be changed. 2 Press the MENU button. Select GET HELP , Softwar e Upgrade , and then press the OK b utton. The Network Upgrade [...]

142 Advanced features Using the SmartTV f eatur es Using the SmartTV features ❖ Y ou need to connect to the Internet before using this feature, see “Setting up the Network” on page 131 . ❖ Certain services may not be currently available in your area. ❖ User registration or login may be required to use some services. ❖ Third party intern[...]

143 Advanced features Using the SmartTV featur es ❖ MediaShare (Media Player): Connected Media Servers and USB devices ❖ The Internet Performing a Search Y ou can perform a search using the SEARCH button on the remote control or the SearchAll bar on the ePOR T AL page. 1 From the remote control, press th e SEARCH button while watching televisio[...]

144 Advanced features Using the SmartTV f eatur es ePORT A L Apps The ePOR T AL Apps can be used t o display bonus content t hrough content service providers s uch as: ❖ Netflix ® ❖ VUDU Apps™ ❖ VUDU Movies™ ❖ Y ouT ube ® ❖ CinemaNo w ® ❖ MediaGuide ❖ eMANU AL Certain services may not be available in your area. Select an App fr[...]

145 Advanced features Using the SmartTV featur es ❖ The resolution of video content streamed from Netflix ® varies depending on the communication speed and bit-rate. ❖ Future upgrades can change the screens and mess ages displayed in the Netflix ® feature. ❖ Netflix ® is supported in the U.S. and Canada, and may not be available in other c[...]

146 Advanced features Using the SmartTV f eatur es 1 Press the MENU button. Select NETWORK > Smart A pps Setup > VUDU Deactivation , and then press the OK b utton . 2 Press the ( / arro w) buttons to select Ye s , and then pres s the OK button. If the VUDU™ icons are not shown in the ePORT AL, you may need to update the TV firmware. Y ou ca[...]

147 Advanced features Using the SmartTV featur es ❖ Y ouT ube™ content has been independently managed by Y ouT ube™, LLC. ❖ Not all Y ouT ube™ content that can be accessed by computer may be viewed with this TV . ❖ This TV may not be able to do some operations that computer can do. ❖ Depending on network environment and the use situat[...]

148 Advanced features Using the SmartTV f eatur es search for and browse your f avorite sites, and find all the content you want, with simple, intuitive na vigat ion. The web browser on this de vice: ❖ does not support platform-dependent technologies such as Activ eX . ❖ only supports preinstalled plu g-ins. ❖ may not support me dia formats o[...]

149 Advanced features Using the SmartTV featur es 6 Y ou can now bro wse websites on your TV using the ( / / / arrow) buttons on the remote control or by using the W irele ss QWER TY keyboard. Select Mouse Emulation by pressing the GREEN button on the remote control to navigate with a generic USB wireless mouse (wireless mouse is not included). Bro[...]

150 Advanced features Using the SmartTV f eatur es Adding Favorites Websites 1 Connect to the network. 2 Press the ePOR T AL button on the remote control to access the ePOR T AL page. Pressing the INTERNET button on the remote control will also launch the web browser . 3 Press the Navigation buttons to scroll to the Internet icon and press OK . 4 F[...]

151 Advanced features Using the SmartTV featur es ❖ If using the on-screen ke yboard, press the BLUE button to view the page. ❖ If using the USB/QWER TY keyboard, press the ENTER button to view the page. ePORT AL Messages Y ou can create personal messages on your TV using the Messages feature. Launch the Messages feature 1 Select the Messages i[...]

152 Advanced features Using the SmartTV f eatur es Edit an event 1 Select the Event in the Event list. Press OK . 2 The Edit Event windo w is displ ayed. Y ou can change the date, ev ent inform ation, and repeat options. ePORT A L Favorite Sites Y ou can access your fa vorite (“bookmark ed”) Internet sites from the ePOR T A L. Access your Inter[...]

153 Advanced features Using the SmartTV featur es ePORT AL Preferences Use ePOR T AL Preferences to custom ize the look and feel of the ePOR T AL. From Preferences, you can: ❖ Adjust the background by selecting different colors ❖ Edit fav ori te Apps by moving and select ing which fav orites to show or hide ❖ Adjust your Event Noti fi cation [...]

154 Advanced features Using the SmartTV f eatur es If you see an error message saying that the MediaGuide was not able to connect to the network, you should check your n etwork connections before trying again. The step-by-step installation wi zard will appear again after performing any of the follo wing tasks: ❖ Changing the ANT/CABLE In setting [...]

155 Advanced features Using the SmartTV featur es ❖ Third party Internet services are not provided by T oshiba, may change or be discontinued at any time and may be subject to Internet service provider restrictions. T oshiba makes no warranties, representations, or assurances about the cont ent, availability or functionality of third-party conten[...]

156 Advanced features Using the SmartTV f eatur es History , Episodes - For TV se ries only , Overview , Summary , Revie w , Cast & Crew , and others. Celebrity detail menus contain different items such as History , Overvie w , Biography , and Credits. The actual menus displayed on the detail screen vary depending on the service that you have c[...]

157 Advanced features Using the SmartTV featur es 4 Select Ye s and press the OK button. The TV will turn off automatically . Y ou can also reset the MediaGuide from the MediaGuide from the setting menu. If the MediaGuide cannot launch or is not functioning correctly , reset the MediaGuide using the instructions above. ePORT AL MediaShare (Videos ,[...]

158 Advanced features Using the SmartTV f eatur es Basic operation Using MediaShare (Media Player) with a USB device When Auto Start is enabled, you will be asked if you want to start the MediaShare (Media Player) wh en a USB de vice is inserted. If Auto Start is disabled (or if you want to connect to a media server on the network), you must manual[...]

159 Advanced features Using the SmartTV featur es T o select a file in the list of contents 1 Press the ( / / / arrow) buttons to select a f ile or folder . 2 Press the OK b ut ton to move to the next layer , or press the BACK button to return to the previous layer . T o close the MediaShare (Media Player) ❖ Press the EXIT button. The TV will ret[...]

160 Advanced features Using the SmartTV f eatur es Viewing movie files Basic Playback 1 Select a file, see “T o select a file in the list of contents” on page 159 . 2 Press the OK b utton or PLA Y button to begin playback. Depending on the file size, it may take some time to start playback. 3 Press the ST OP button to stop playback. 4 If playba[...]

161 Advanced features Using the SmartTV featur es T o set the repeat mode 1 Press the QUICK button. The current repeat setting appears. 2 Press the ( / arrow) b uttons to select Off , All , or 1 . 3 Press the BAC K button. The setting is effecti ve until the TV is turned off. T o display the file status information 1 Press the INFO b u tton during [...]

162 Advanced features Using the SmartTV f eatur es It may not be possible to use certain playback or d isplay some files. In some cases certain files and ser vers may not support playback features, such as pause. Playing music files Basic Playback: 1 Select a file, see “T o select a file in the list of contents” on page 159 . Press the OK or PL[...]

163 Advanced features Using the SmartTV featur es 1 Press the QUICK button. The current repeat setting appears. 2 Press the ( / arrow) b uttons to select Off , All , or 1 . 3 Press the BAC K button. The setting is effecti ve until the TV is turned off. T o display the file status information: 1 Press the INFO b u tton during playback. The informati[...]

164 Advanced features Using the SmartTV f eatur es It may not be possible to use certain playback or d isplay some files. In some cases certain files and ser vers may not support playback features, such as fast-forward . Viewing photo files Multi View mode This view mode allo ws you to search fo r photos in a grid format. These pictures are display[...]

165 Advanced features Using the SmartTV featur es Single view mode is changed to Multi View mode when the BACK button is pressed. Slideshow mode This view allo ws you to watch a slideshow of the photos. In this mode, only files located in th e selected directory appear . 1 T o switch to Slideshow mode, press the OK bu t to n while in Single V iew m[...]

166 Advanced features Sear ch The information may not correctly display depending on the content or media server . Certain processes may take some time to complete. File specifications: USB use: ❖ Data compatibility: JPEG Exif v er 2.2 ❖ File f ormat: JPEG ❖ Maximum viewable resolution: 8192 x16384 ❖ Maximum photo size: 9MB ❖ Maximum numb[...]

167 Advanced features Network Device Setup The search retrieval stops when content is being played. Network Device Setup In order to set the access the External Control Setu p, Media Renderer Setup, or De vice Name Setup, you must use the Network Device Setup menu. External Control Setup 1 Press the MENU button. Select NETWORK , Network Device Setu[...]

168 Advanced features Network Device Setup Only the 0-9, dash (-), and capital A-Z characters may be used for the user name and password. Setting up the Media Renderer feature The TV can be conf igured as a Me dia Renderer . When operating as a Media Renderer , the TV displays content provided by a Media Server . The selection of the media is done [...]

169 Advanced features Network Device Setup 11 Press the ( / arro w) bu ttons to adj ust to the desi red v olume. Press the OK b utton. 12 If you want to wak e up the TV by using the Media Controller , press the ( / arrow) b utt ons to select Ye s . Press the OK button. Device Name setup The device name as a Media Renderer can be changed. 1 Press th[...]

170 Advanced features Network Device Setup 7 Press the OK b utton . The box is selected. T o clear the selection, press the OK button. 8 Press the right arrow button to select Done . Press the OK button. ❖ Y ou can select up to 8 Media Controllers. ❖ If you would not like to limit the Media Controllers for this TV , set Access Control to Off. ?[...]

171 Chapter 9 Apps Collaboration Using Apps on a T ablet or Smartphone T oshiba provides three apps for tablets and smartphones: ❖ T oshiba A/V Remote App ❖ T oshiba Send & P lay App ❖ T oshiba Medi aGuide App These apps are av ailable for comp atible T oshiba equipment using compatible tablets and smartphones powered by Android™ or IOS[...]

172 Apps Collaboration Apps Contr ol Pr ofile ❖ Third party Internet services are not provided by T oshiba, may change or be discontinued at any time, and may be subject to Internet service provider restrictions. T oshiba makes no warranties, representations, or assurances about the cont ent, availability , or functionality of th ird-party conten[...]

173 Apps Collaboration Initial setup T o enable the New De vice Detection: 1 Press the MENU button. Select NETWORK , Network Device Setup and press the OK b utton to select. 2 Use the ( / arrow) b uttons to select Apps Con trol Pr ofil e and press the OK button. The Apps Control Profile windo w will appear . 3 Use the ( / arrow) b uttons to select [...]

174 Apps Collaboration T oshiba A/V Remote App 4 Press the OK b utton on the tablet or smartphone screen. (Sample Illustration) T oshiba A/V Remote Ap p—Input PIN code scr een T oshiba A/V Remote App The tablet and smartphone control apps provide multiple pages of options for maximu m control . The y include the codes needed to operate today&apos[...]

175 Apps Collaboration T oshiba MediaGuide TV listings The TV listings are display ed in a grid format, which is easily controlled by swi ping up, down, left, and right with your finger . Movies/TV portal screen Y ou can select from the Movie or the TV program Hotlist, their Portals, or the Re minders as desi red. Search screen Y ou can search by k[...]

176 Chapter 10 T roubleshooting General troubleshooting Before calling a service technician, re vie w this chapter or visit the T oshiba technical support W eb s ite at support.toshib a.com for possible causes/solutions for the probl em you are experiencing. Before you begin to troubleshoot any problem, f irst unplug the TV from the AC wall outlet,[...]

177 T roubleshooting Pictur e pr oblems Other problems. If your TV’ s problem is not ad dressed in th is T roub leshooting chapter or the recommended solution has not worked, use the Reset Factory Defaults procedure, see “Resetting to Factory Defaults” on page 107 . TV will not turn on. Ensure the power cord is plugged in properly , and then [...]

178 T roubleshooting Pictur e pr oblems If Edge Enhancer does not achie v e a sharper picture, change the Sharpness v alue to increase the sharpness le vel, see “Edge Enhancer” on page 117 . V ideo Input Selection problems. If the Input Selection window does not appear when you press the INPUT button on the remote control or the TV control pane[...]

179 T roubleshooting Sound pr oblems ❖ The settings of Side Shared Audio and Rear Shared A udio may be not correct. Check the connections, see “Connecting a digital audio system” o n page 34 . ❖ T urn off and unplug the TV from the A C wall outlet for a few seconds and plug it back in. Sound problems Check the antenna/cab le connections, se[...]

180 T roubleshooting Closed caption pr oblems persists, clear all channels from the channel list and reprogram channels into memory , see “Stor ing channels in me mory (optional)” on page 66 . For additional in formation, see “TV stops responding to controls. ” on page 176 . If the pro blem persists, use the Reset Factory Defaults procedure[...]

181 T roubleshooting HDMI® pr oblems If sev eral de vices are connected, the HDMI ® CEC Control feature may not operate properly . Read the instruction manual of the connected HDMI ® CEC de vice. HDMI ® problems HDMI ® cables. Ensure that HDMI ® cables with the ( ) Logo are used, see “Connecting an H DMI® or D VI device to the HDMI® input[...]

182 T roubleshooting Network pr oblems Network Setup fails (Manual). Ensure that the TV IP address is not the same as any other de vice on the network. ❖ Example: IP address 192.168.0.100 and IP address 192.168.0.101 are different addresses on the same network. Make sure the TV IP address is on the same subnet as the networked computer . ❖ Exam[...]

183 T roubleshooting W ireless network pr oblems T oo many de vices are connected. Y ou cannot connect more than 32 sharing devices at one time. The media server is not turned On. The “server” is not a media server de vice. Check the fire wall and streamin g settings on the media server . Wireless network problems Check that the router/AP (Acce[...]

184 T roubleshooting Light Indicator Confirm that the contents of eith er the media server or the USB storage device are in formats that are supported by this TV , see “MediaShare (Media Player) specif ications” on page 157 . Depending on the media server , access may be limited by the MA C address. Set the server according to the media serv er[...]

185 T roubleshooting If the pr oblem persists after trying the solutions ❖ Power On f ailure. T urn off the TV and unplug the po wer cord. After approximately one minute, plug th e po wer cord in again and turn on the TV . If the problem persists after tr ying the solutions In the U.S., visit T AIS Consumer Solutions on the web at support.toshiba[...]

186 Appendix A Specifications ❖ This model complies with the specifications listed below . ❖ Designs and specifications are subject to change without notice. ❖ This model may not be compatible with features and/or specifications that may be added in the future. T elevision system Channel coverage NTSC standard A TSC standard 8VSB Digital Cabl[...]

187 Specifications P ower sour ce Power source 120 V A C, 60 Hz Power consumption Audio power Speaker type 42L6200U 0.8 A (m aximum current) 0.3 W in Standby mode 47L6200U 0.9 A (m aximum current) 0.3 W in Standby mode 55L6200U 1.0 A (m aximum current) 0.3 W in Standby mode 47L7200U 1.2 A (m aximum current) 0.3 W in Standby mode 55L7200U 1.4 A (m a[...]

188 Specifications V ideo/audio terminals Video/audio terminals Video/audio input ColorStream ® (component video) HD input HDMI ® input Digital audio output Optical type PC input 15-Pin D-sub Analog RGB Wireless connection V ideo 1 V (p-p), 75 ohm , negati ve sync. Audio 200 mV (rms) (-20dBFS) Vi d e o Y : 1V (p-p), 75 ohm P R : 0.7V (p-p), 75 oh[...]

189 Specifications Dimensions with table stand Ethernet IEEE 802.3. USB Univ ersal Serial Bus Specification, Re vison 1.1. Univ ersal Serial Bus Specification, Re vison 2.0. Dimensions with table stand Mass (weight) Operating conditions 42L6200U W idt h 37.6” (954 m m) Height 25.0 ” (634 mm) Depth 8 .4” (214 mm) 47L6200U W idt h 41.9” (1064[...]

190 Specifications Supplied accessories Supplied accessories ❖ Remote control with two size “ A A” batteries ❖ L7200U model number: CT -90395 ❖ L6200U model number: CT -90408 ❖ Resource Guide ❖ Pedestal and hardware ❖ Wa r r a n t y ❖ W ireless QWER TY keyboard (2x AAA batteries) ❖ A vailable with some models. Not av ailable in [...]

191 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D Acceptable signal formats for PC IN, HDMI ® , and 3D PC IN signal formats ❖ The PC IN on this TV only accepts signal formats which are compliant with VESA-DMT as in the table below . Since some PCs input signals are different fr om the resolution and frequency described in th[...]

192 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D HDMI ® signal formats ❖ The HDMI ® inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA-DMT as in the table below . Since some computer , HDMI ® , or DVI device input signals are different from the resolution and frequenc[...]

193 Specifications Acceptable signal formats for PC IN, HDMI®, and 3D 3D Signal formats* XG A 1024 x 768 60 . 0 04 H z 4 8 .3 6 3 k H z 6 5. 0 00 M Hz T B D 70.069 Hz 56.4 76 kHz 75.000 MHz TBD 75.029 Hz 60.0 23 kHz 78.750 MHz TBD WX G A 1280 x 76 8 5 9 .9 9 5 Hz 47 . 39 6 kH z 6 8 . 25 0 M H z TB D 59.870 Hz 47.7 76 kHz 79.500 MHz TBD 74.893 Hz 6[...]

194 Specifications Operating the TV with combination b uttons *Some content may not be supported depending o n the input source format. Operating the TV with combination buttons Y ou can directly operate the TV power , input switch, picture size switch, and pict ure mode switch by pressing a combination button while holding down a color b utto n. 1[...]

195 Specifications Operating the TV with combination b uttons GREEN 1 Native (picture size) 2 4:3 (picture size) 3 TheaterWide 1 (picture size) 4 TheaterWide 2 (picture size) 5 TheaterWide 3 (picture size) 6 Full (picture size) 7 Normal (pic ture size) 8 Dot by Dot (picture size) MUTE 1/2 Mute On YELLOW 1 AutoView (picture mode) 2 Dynamic (pictu re[...]

196 Index Numerics 3D 2D from Quick m enu 79 3D from Quick m enu 78 3D lock 83 3D timer lock 83 adjusting 2D to 3D depth 84 auto start mode 81 button operation 76 change pin code 82 delete pin code 82 enable 3D timer 83 enter ne w pin code 81 forgotten pin code 82 functions 74 Nativ e mo de 80 selecting format 76 setting 3D pin code 81 start messag[...]

197 Index Dolby® Digital Dynamic Range Control 126 muting sound 125 optical audio output format 12 6 Auto Aspect using 114 auto input features 70 C cables 3.5mm to RCA Y -cable 29 analog RGB (15-pin) 29 coaxial (F-type) 27 component video (red/green/blue) 28 Dual-wand IR blaster cable 29 HDMI® 28 LAN 29 optical audio 29 ov erview of cables 27 sta[...]

198 Index delete ev ent 151 editing fav orite apps 152 even t s 151 MediaShare 157 modify fav orites 152 preferences 153 search 143 select apps 144 view f av ori tes 152 ePortal 142 ePOR T AL Intern et 147 access web page 150 adding fav orit es 150 browsing fa vorites 149 expert picture settings RGB Filter 123 setting 122 T est Pattern 122 White Ba[...]

199 Index Network De vice Setup 167 no signal power down set 106 O overv iew installation 22 setup 22 use 22 P parental controls blocking programs/mo vies by rating (V -Chip) 91 using 91 Photos access via ePOR T AL 157 picture adjusting 115 adjusting q uality 115 picture mode selecting 115 picture settings locking 124 picture size 4/3 111 Dot by Do[...]

200 Index operating conditions 189 PC IN signal formats 191 PC input 188 power consumption 187 power source 187 remote, combination buttons 194 speaker type 187 supplied accessories 190 TV system 186 USB 189 video/audio terminals 188 wireless connection 188 support info rmation show 107 SurfLock™ using 85 T time limit set for games 96 timer sleep[...]