Toshiba PRO500 инструкция обслуживания

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Toshiba Personal Computer Satellite P500/Pro500 Maintenance Manual TOSHIBA CORPORATION File Number 960-Q08[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Copyright © 2003 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein. Toshiba P[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Silvis-10M10MG-10AR+10ARG Series. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and [...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite P500 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and d[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Me[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram ............................................................................[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Chapter 2 Troubleshooting Procedures 2.1 Troubleshooting ........................................................................................................... .1 2.2 Troubleshooting Flowchart .......................................................................................[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) 2.9 Display Troubleshooting..............................................................................................33 Procedure 1 External Monitor Check...........................................................33 Procedure 2 Diagnostic Test Program Execution Check .............[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Chapter 3 Diagnostic Programs 3.1 Tests and Diagnostics Software Overview ....... 3- Fehler! Textmarke nicht definiert. 3.2 Executing the Diagnostic Test .......................... 3- Fehler! Textmarke nicht definiert. 3.3 Subtest names.................................................[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) 3.21.3 Test Status Screen ............................................. 3- Fehler! Textmarke nicht definiert. 3.21.4 Test Stop Display ..................................................................................................... 3- 70 3.21.5 How to enter data .................[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Chapter 4 Replacement Procedures 4.1 Overview ................................................................................................................... .4 - 1 Safety Precautions ................................................................................................ [...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) 4.17 Application for thermal pad and grease on CPU, North Bridge, and VGA Board………………………………………………………………………….....4-55[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout ................................................................................................ B-1 Appendix C Pin Assignments........[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)[...]

Satellite P500 and Satellite Pro500 Maintenanc e Ma nual (960-Q08 ) Chapter 1 Hardware Overview[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenanc e Ma nual (960-Q08 ) ii 1 Hardware Overview Chapter 1 Contents 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram .................................................[...]

Hardware Overview Chapter 1 Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) iii Figures Figure 1-1 Front of the computer.........................................................................................4 Figure 1-2 System block diagram for Intel platform ...........................................................5 Figure 1-[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 1 Features 1.1 Features The Satellite P500 (Intel Plat form) features are listed below.  Microprocessor Microprocessor that is used will be d ifferent by the model. It supports processors as follows 1 . Intel® Core™2 Duo Mobile Processor T9900 3.06GH[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 2  Memory Two DDRII SO-DIMM (800MHz specification compliant) used and be up to 4GB which can be upgraded through Memory M odule Slot. Maximum upgradeable system memory may depend on the model  VRAM Shared with System RAM for Intel GM45, PM45 。 HDD[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 3   Battery The RTC battery is equipped inside the computer. It is good with no external power source for 1month on average. The main battery is a detachable lithium ion battery. 6 cell Li-Ion 10.8v/4000mAh 12 cell Li-Ion 10.8v/8000mAh  USB (Unive[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 4  Security Kensington Lock, Fingerprint –Enhanced Lo ck is also equipped.  HDD Password  3D Accelerometer for HDD[...]

Chapter 1 Hardware Overview 1. Web Camera LED* 2. Web Camera* 3. Built-in microphone* 4. Wireless LAN Antenna* 5. Speaker 6. Touch Pad 7. Fingerprint Sensor* 8. Touch Pad Control Buttons 9. Display Screen 10. Speaker 11. Power Button* 12. Internet Button* 13. CD/ DVD Button* 14. Previous Button* 15. Volume Down Button* 16. Mute Button* 17. Play/Pau[...]

Chapter 1 Hardware Overview 1.2 System Block Diagram Figure 1-2 shows the system block diagram. Figure 1-2 System block di agram for Intel Platform Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 6[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 7 The PC contains the following components.  CPU 1 . Intel® Core™2 Duo Mobile Processor T9900 3.06GHz T9800 2.93GHz T9600 2.8GHz T9550 2.66GHz P9600 2.66GHz P8700 2.53GHz P8600 2.40GHz P7450 2.13GHz T6600 2.20GHz T6400 2.00GHz 2. Intel® Pentium® Du[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 8  BIOS ROM (Flash memory) • 16Mbit  Chipset (Montevina Platform ) This gate array has the following elements and functions. • North Bridge (Intel PM45,GM45/GL40) − Merom-M processor System Bus support − DRAM Controller : DDRII 667/800 suppo[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 9  • Card Reader controller (O2 OZ888GS0LN)  • 10/100 LAN controller (Atheros AR8132M)  • Giga LAN controller (Atheros AR8131M) Mini Card Wireless LAN card (BTO) 5.4 GHz DSSS/OFDM LAN card is equi pped. Conformity with IEEE 802.11b/g, IEEE 8[...]

Chapter 1 Hardware Overview 1.3 2.5-inch Hard Disk Drive A compact, high-capacity HDD with a height of 9.5mm. Contains a 2.5-inch magnetic disk and magnetic heads. Figure 1-3 shows a view of the 2.5-inch HDD and Tables 1-1 and 1-2 list the specifications. Figure 1-3 2.5-inch HDD Table 1-1 2.5-inch HDD dimensions Standard value Parameter TOSHIBA MK1[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 11 Standard value Parameter HITACHI HTS542512k9S A0 0 HITACHI HTS542516k9S A 00 HITACHI HTS542520k9S A 00 HITACHI HTS542525k9S A00 Width (mm) 69.85 +/- 0.25 Height (mm) 9.5 Depth (mm) 100.2 +/- 0.25 Outlin e dimen sions Weight (g) 95 (max.) 95 (max.) 102 ([...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 12 Table 1-3 2.5-inch HDD specifications Specification Parameter TOSHIBA MK1246G SX TOSHIBA MK1646GS X TOSHIBA MK2046G SX TOSHIBA MK2546G SX TOSHIBA MK3252G SX Storage size (formatted) 120GB 160GB 200GB 250 GB 320GB Speed (RPM) 5,400 Data transfer Rate - [...]

Chapter 1 Hardware Overview Specification Parameter HITACHI HTS542512k9 SA 00 HITACHI HTS542516k9S A00 HITACHI HTS542520k9S A 00 HITACHI HTS542525k9S A0 0 Storage size (formatted) 120GB 160GB 200GB 250GB Speed (RPM) 5,400 Data transfer Rate - To/From Media - T0/From Hos t 65.5MB/s 1.5Gbps 65.5MB/s 1.5Gbps 65.5MB/s 1.5Gbps 65.5MB/s 1.5Gbps bus trans[...]

Chapter 1 Hardware Overview 1.4 Optical Drive(HD DVD- ROM & CD-R/RW Drive) The DVD Super Multi drive accommodates eith er 12 cm (4.72-inch) or 8 cm (3.15-inch) CD/DVD-ROM, CD-R/RW, DVD±R/±RW and DVD-RA M. It is a high-performance drive that reads DVD-ROM at maximum 8-speed a nd CD at maximum 24-sp eed. W rite speed of DVD±R/±RW and DVD-RAM [...]

Chapter 1 Hardware Overview Table 1- 4 DVD Super Multi drive outline dimensions Parameter Standard value Maker HLDS (GSA-T40N-AT AK7B0) HLDS (GSA-T40F-ATAK 7B0) Width (mm) 128 Height (mm) 12.7 Depth (mm) 127 Outline dimensions Mass (g) 173 Parameter Standard value Maker Pioneer (DVR-KD08T BM) Pioneer (DVR-KD08T BF) Width (mm) 128 Height (mm) 12.7 D[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 16 Table 1- 5 HLDS DVD Super Multi drive specifications HLDS Drive Specification Parameter GSA-T40N - ATAK7B0 GSA-T40F - ATAK7B0 Label Flash Function No support Support Read DVD-ROM 8x max . DVD-R(SL/DL) 8x/4x max. DVD+R(SL/DL) 8x/4x max. DVD-RW 8x max. D[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 1 7 Table 1- 6 Pioneer DVD Super Multi drive specifications Pioneer Drive Specification Parameter DVR-KD08TBM D VR-KD08TBF Label Flash Function No support Support Read 8X CAV at DVD-ROM SL, DVD-R / +R, -RW / +RW, DVD-ROM DL, DVD-R DL / +R DL 5X Zone CLV at[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 18 Table 1- 7 Panasonic DVD Super Multi drive specifications Panasonic Drive Specification Parameter UJ-870BTJZ- A UJ-870FTJZ-A Label Flash Function No support Support Read DVD-ROM :Max 8X CAV CD-ROM :Max 24X CAV Write CD-R :Max24X CAV CD-RW :4X CLV High [...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 19 Table 1- 8 TSST DVD Super Multi drive specifications TSST Drive Specification Parameter TS-L632H TS-L632P Label Flash Function No support Support Read CD-ROM Max. 24X (3,600 KB/sec) CD-R Max. 24X (3,600 KB/sec) CD-RW Max. 24X (3,600 KB/sec) DVD-ROM(SL) [...]

Chapter 1 Hardware Overview 1.5 Keyboard The Silvis-10M10MG-10AR+10ARG keyboard has tw o different kinds of placem ent, one is for US style and the other is for UK style. Figure 1-5 is a view of the keyboard for US style Figure 1-5 Keyboard for US style Figure 1-6 is a view of the keyboard for UK style Figure 1-6 Keyboard for UK style See Appendix [...]

Chapter 1 Hardware Overview 1.6 TFT Color Display The Silvis-10M10MG-10AR+10ARGanel use CCFL to control backlight. 1.6.1 LCD Module with CCFL Backlight Figure 1-7 shows a view of the LCD modul e and Table 1-9 lists the specifications. Figure 1-7 SAMSUNG LCD Module Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 21[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 22 Table 1-9 LCD module specifications Specifications(WXGA+) Item Samsung LTN184K T02-T0 1 Samsung LTN184H T04-T0 1 Number of Dots 1,440 x 3(R,G,B) x 900 1,440 x 3(R,G,B) x 900 Dot spacing (mm) 0.243 (H) × 0.243 (V) 0.213 (H) × 0.213 (V) Display Colors [...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 23 1.6.2 CCFL Inverter Board Table 1-10 lists the FL inve rter board specifications. Table 1-10 FL inverter board specifications Specifications Item Foxconn T18I095.00 Delta DAC-08N035 AF SUMIDA TWS-449-308 TDK TBD485NR Voltage (V) 8~20 8~20 8~20 8~20 Inpu[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 24 1.7 Power Rails Table 1-11 lists the power rail output sp ecifications of montevina platform. Table 1-11 montevina Powe r supply output rating Power supply （ Yes/No ） Name Voltage [V] Power OFF Suspend mode Power OFF Boot mode No Battery +5VPCU 5 Y[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 25 1.8 Batteries The PC has the following two batteries.  Main battery  Real time clock (RTC) battery Table 1-12 lists the specifica tions for these two batteries. Battery Name Battery Element Output Voltage Capacity Sanyo 6 Cells 10.8 v 4000mAh Main[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 26 1.8.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The power supply microprocessor controls power supply and dete cts a full charge when the AC adaptor and battery are connected to the computer.  Battery [...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) 27 1.8.3 RTC Battery The RTC battery provides the power supply to maintain the date, time, and other system information in memory. Table 1-15 lists the Time required for charges of RTC battery and data preservation time. Table 1-15 Time required fo r charg[...]

Chapter 1 Hardware Overview Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 28 1.9 AC Adapter The AC adapter is used to charge the battery. Table 1-16 lists the AC adapter specifications. Table 1-16 AC adapter specifications Parameter Specification With Led DELTA/ LITE-ON DELTA/ LITE-ON DELTA/ LITE-ON Power 75W 90W 120W Input vol[...]

2-1 Satellite P500 and Satellite Pro5 00 Maint enance Manual (960-Q08) Chapter 2 Troubleshooting Procedures[...]

2-2 Satellite P500 and Satellite Pro500 Maintenance Man ual ( 96 0- Q 08)[...]

2-3 Satellite P500 and Sa tellite Pro500 Maint enance Manual (960-Q08) Chapter 2 Contents 2.1 Troubleshooting .............................................................................................................1 2.2 Troubleshooting Flowchart ............................................................................................3 2.3 P[...]

2-4 Satellite P500 and Satellite Pro500 Maintenance Man ual ( 96 0- Q 08) 2.9 Display Troubleshooting ..............................................................................................33 Procedure 1 External Monitor Check ...........................................................33 Procedure 2 Diagnostic Te st Program Execution Check .[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  1 2 2.1 Troubleshooting Chapter 2 describes how to determine which Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction. The FRUs covered are: 1. Power supply 6. Touch pad 11. Wireless LAN 2. System Board 7[...]

2 Troubleshooting Procedures There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is descri bed in the figure as line. (2) Pin connection is describe d in the figure as arrow. <e.g.> Connection of modem 2 Satellite P500 and Satellite Pro50[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  3 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide fo r determining which troubleshooting procedures to execute. Before going through the flow chart steps, verify the following:  Ask him or her to enter the pas[...]

2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) 4 Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 )[...]

2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) If the diagnostics program cannot detect an e rror, the problem may be intermittent. The Test program should be executed several tim es to is olate the problem. Check the Log Utilities Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  5[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 6 function to confirm which diagnostic test de tected an error(s), and then perform the appropriate troubleshooting procedures as follows: 1. If an error is detected on the system test, memory test, display test, CD-ROM/DVD- ROM test, expansion test, rea[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  7 2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts. To determine if the power supply is functioning properly, start with Procedure 1 and continue with the other Procedures as instructe[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 8 Table 2-2 DC IN icon DC IN icon Power supply status Lights blue DC power is being supplied from the AC ada pter. Blinks orange Power supply malfunctio n *1 Doesn’t light Any condition other than those above. *1 When the power supply controller det ec[...]

2 Troubleshooting Procedures Procedure 2 Connection Check The wiring diagram related to th e power supply is shown below: Any of the connectors may be disconnected. Perform Check 1. Check 1 Make sure the AC adapter and the AC power cord is firmly plugged into the DC IN connector PCN1 (Santa Rosa) and wall outlet. If these cables are conn ected firm[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 10 Procedure 4 Replacement Check The power is supplied to the system board by the AC adapter. If either the AC adapter or the system board was damaged, perform the following Checks. To disassemble the computer, follow the steps described in Chapter 4, Re[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  11 2.4 System Board Troubleshooting This section describes how to determ ine if th e system board is malfunctioning or not. Start with Procedure 1 and continue with the other procedures as instructed. The procedures described in this sec[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 12 Procedure 1 Message Check When the power is turned on, the system perfor ms the Power On Self Test (POST) installed in the BIOS ROM. The POST tests each IC on the system board and initializes it.  If an error message is shown on the display, perfor[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  13 If any other error message displays, perform Check 3. Check 3 The IRT checks the system board. When the IRT detects an error, the system stops or an error message appears. If one of the following error messages (1) th rough (17), (24)[...]

2 Troubleshooting Procedures Procedure 2 Debugging Port Check Check the MiniPCI Debug board. The tool for debug port test is shown below. Figure 2-1 A set of to ol for debug port test The test procedures are follows: 1. Replace Mini PCI debug port with Wireless LAN card, check LED in the Mini PCI debug board The following is a list of the Test Po i[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  15 Code Beeps POST Routine Description 14h Initialize keyboard controller 16h 1-2-2-3 BIOS ROM checksum 17h Initialize cache before memory autosize 18h 8254 timer initialization 1Ah 8237 DMA controller initialization 1Ch Reset Programmab[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 16 66h Configure advanced cache registers 67h Initialize Multi Processor APIC 68h Enable external and CPU caches 69h Setup System Management Mode (SMM) area 6Ah Display external L2 cache size 6Bh Load custom defaults (optional) 6Ch Display shadow-area me[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  17 Code Beeps POST Routine Description AAh Scan for F2 key stroke ACh Enter SETUP AEh Clear Boot flag B0h Check for errors B2h POST done - prepare to boot operating system B4h 1 One short beep before boot B5h Terminate QuietBoot (optiona[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 18 Code Beeps For Boot Block in Flash ROM E0h Initialize the chipset E1h Initialize the bridge E2h Initialize the CPU E3h Initialize system timer E4h Initialize system I/O E5h Check force recovery boot E6h Checksum BIOS ROM E7h Go to BIOS E8h Set Huge Se[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  19 Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. These tests check the system board. Refer to Chapter 3, Tests and Diagnostic, for more information on how to perform these [...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 20 2.5 USB FDD Troubleshooting To check if the USB FDD is malfunctioning or not, follow the troubl eshooting procedures below as instructed. Procedure 1: FDD Head Cleaning Check Procedure 2: Diagnostic Te st Program Execution Check Procedure 3: Connector[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  21 Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD, tu rn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more inform ation about th e diagnostics test proce[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 22 Procedure 3 Connector Check and Replacement Check USB FDD is connected to USB port on system board and US board. US board is also connected to system board by cable. The connect ion of cable and board may be defective. Otherwise, they may be faulty. D[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  23 Check 2 USB FDD may be fau lty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 Connect USB FDD to each port embedded on system board. If it does not work properly when conn ected to CN12, CN19, CN20 o[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 24 2.6 2.5” HDD Troubleshooting To check if 2.5” HDD is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Partition Check Procedure 2: Message Check Procedure 3: Format Check Procedure 4: Diagnostic Te st [...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  25 Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. When the test detects an error, an error message is displayed on the screen. Make sure no flopp[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenanc e Manual (960-Q08 ) 26 Procedure 3 Format Check The computer’s HDD is formatted using the MS-DOS FORMAT program or the physical format program of the test program. To fo rmat the HDD, start with Check 1 below and perform the other steps as required. Refer to the MS-DOS Ma[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  27 Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information abo[...]

2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check HDD(s) is/are connected to the connector(s) on the system board. Th e connection of HDD(s) and board may be defective. Otherwise, they may be faulty. Disassemble the com puter following instructions in Chapter 4, Replacement Procedures and perform the following checks. C[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  29 2.7 Keyboard Troubleshooting To check if the computer’s keyboard is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector and R[...]

2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure keyboard cable is firmly connected to system bo[...]

2 Troubleshooting Procedures Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)  31 2.8 Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector and[...]

2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the cable is fi rmly connected to system board.[...]

Troubleshooting Procedures Satellite P500 Maintenan ce Manual (960-Q08) 33 2.9 Display Troubleshooting To check if the computer’s display is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: External Monitor Check Procedure 2: Diagnostic Te st Program Execution Check Procedure 3: Connector and Cable C[...]

Troubleshooting Procedures Procedure 3 Connector and Cable Check LCD Module is connected to system board by an LCD/FL cable. FL inverter board is also connected to system board by an LCD/FL cable . And, fluorescent lamp is connected to FL inverter board by HV cable. Their cables may be disconnected from system board or FL inverter board. Disassembl[...]

Troubleshooting Procedures Satellite P500 Maintenan ce Manual (960-Q08) 35 Procedure 4 Replacement Check Fluorescent lamp, FL inverter, LCD module, HV cable and LCD/FL cable are connected to display circuits. Any of these components may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassembl e the computer and t[...]

Troubleshooting Procedures 2.10 Optical Disk Drive Troubleshooting To check if optical disk drive is malfunctioni ng or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute th[...]

Troubleshooting Procedures Satellite P500 Maintenan ce Manual (960-Q08) 37 Check 3 System board may be faulty. Replace it with ne w one following the instructions in Chapter 4.[...]

Troubleshooting Procedures 2.11 Modem Troubleshooting To check if modem is malfunctioning or not, fo llow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute Modem test in the LAN/Modem[...]

Troubleshooting Procedures Satellite P500 Maintenan ce Manual (960-Q08) 39 Check 2 Modem cable m ay be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 MDC may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occu rs, perform Check 4. Check 4 Cable between MDC and sy[...]

Troubleshooting Procedures 2.12 LAN Troubleshooting To check if the computer’s LAN is malfunc tioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute LAN test in th[...]

Troubleshooting Procedures Satellite P500 Maintenan ce Manual (960-Q08) 41[...]

Troubleshooting Procedures Satellite P500 Maintenance Manual (960-Q08) 42 2.13 Wireless LAN Troubleshooting To check if the computer's W ireless LAN is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Transmitting-Receiving Check Procedure 2: Antennas' Connection Check Procedure 3: Replacement[...]

Troubleshooting Procedures Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: Any of the connections may be defective. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the wirele ss communication switch[...]

Troubleshooting Procedures Satellite P500 Maintenance Manual (960-Q08) 44 Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disa ssemble the computer and then perform the following checks: Check 1 Wireless LAN antenna may be fau[...]

Troubleshooting Procedures 2.14 Sound Troubleshooting To check if the sound function is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check Procedure 2: Replacement Check Procedure 1 Connector Check The connection of sound system is shown in the following figure. As the connection may be de[...]

Troubleshooting Procedures Satellite P500 Maintenance Manual (960-Q08) 46 Procedure 2 Replacement Check  If External microphone/Headphone does not work properly, perform check 1.  If Internal microphone /Speaker does not work properly, perform check 2.  If HP out does not work properly, perform check 3.  If Volume control does not wo rk[...]

Troubleshooting Procedures 2.15 Fingerprint Troubleshooting To check if the computer’s Fingerprint is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute Fingerprint test in the test program . Refer to Chap[...]

Troubleshooting Procedures 2.16 Bluetooth Troubleshooting To check if the computer’s B lue tooth is malfunctioning or not, follow the troubleshooting procedure below as instructed. Procedure 1: Connector Check and Replacement Check Procedure 1 Connector Check an d Replacement Check The B lue tooth function is connected to system board. If B lue t[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 1 Chapter 3 Diagnostic Programs[...]

Test Program for Field. 2 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Chapter 3 Contents 3.1 Tests and Diagnostics Software Overview ............................................................ 3-3 3.2 Executing the Diagnostic Test ............................................................................... 3-4 3.3 Subtest[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 3 3.1 Tests and Diagnostics Software Overview This chapter explains how to use the Tests and Diagnostics Software for the Satellite P500 and Satellite Pro P500 computer systems. NOTES : Before starting the Tests and Diagnostics software: 1. Check all cables f[...]

Test Program for Field. 3.2 Executing the Diagnostic Test DOS is required to run the Diagnostics Program. To start the programs follow these steps: 1. Create a DOS bootable disk and copy all the files from the Tests and Diagnostics software to the disk. 2. Insert the boot disk into the computer’s floppy disk drive and turn on the computer. NOTES [...]

Test Program for Field. The following menu displays: :Select item Enter:Decision item Esc:Escape TOSHIBA Satellite(Pro) P500 Diagnostics Version V1.00 [ DIAGNOSTICS MENU ] 01. DIAGNOSTIC TEST 02. RUNNING TEST 03. DMI INFORMATION 04. LOG UTILITIES 05. SYSTEM CONFIGURATION ::Select item ESC :Escape 06. OPTION 99. EXIT [ DIAGNOSTIC TEST MENU ] 01. SYS[...]

Test Program for Field. 4. Select the subtest you want to execute and press Enter . The following menu displays: 6 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 5. Select the desired test from the subtest menu and press Enter . The following Test Parameter menu displays: [ DIAGNOSTICS MENU ] 01. DIAG STIC TEST NO 02. RUNNING TE[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 7 NOTES : The Item2 and 3 of Test Parameter are not used by some tests. Go To Test Move the highlight bar to Go To Test and press Enter to start executing the test. Test Loop Select NO to return the screen to the subtest menu after the test is com plete. Sele[...]

Test Program for Field. 8 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 3.3 Subtest names Table 3-1 lists the subtest names for each test program in the Diagnostic Test menu. Table 3-1 Subtest Names(1/3) No. Test Name No. Subtest Name 01 SYSTEM TEST 01 02 03 04 FAN ON/OFF check Battery TEST CPU Temperature 3D HDD Protection Tes[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 9 Table 3-1 Subtest Names(2/3) No. Test Name No. Subtest Name 05 FLOPPY DISK TEST 01 02 03 04 05 Sequential Read Sequential W/R/C Random Address/Data Write Specified Address Read Specified Address 06 HARD DISK TEST 01 02 03 04 05 06 07 08 Sequential Read Addr[...]

Test Program for Field. 10 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Table 3-1 Subtest Names(3/3) No. Test Name No. Subtest Name 10 MULTIMEDIA TEST 01 02 03 04 Sequential Read Test Random Read Test Read Specified Address Test 1 point W/R/C Test 11 MEMORY2 01 02 03 04 All one/zero Test Walking 1/Walking 0 Test(Left) Walking [...]

Test Program for Field. 3.4 System Test To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The System Test contains three subtests. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 FAN ON/OFF Checking Select 1,2,3 to control FAN on/off , 1=Fa[...]

Test Program for Field. 12 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Subtest 03 CPU Temperature This will display CPU Temperature for check , press [ESC] to exit . [CPU_TEMP.EXE] Program Version : 1.3 03-09-2009 CPU Temperature : XX GPU Temperature : XX NOTES : If no external Graphics , GPU not report temperature . Subtest [...]

Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program The portion which PC and Test-Fixture contact is green. Set method of PC 3 Test1 Judgment If all data is less than ranges, it will be OK. X Z Upper Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 13[...]

Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 4 Test2 Judgment If all data is less than ranges, it will be OK. U pp e r Rear 14 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual[...]

Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 15 5 Test3 Judgment If all data is less than ranges, it will be OK. U pp e r Right[...]

Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 16 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 6 Test4 Judgment If all data is less than ranges, it will be OK. U pp e r Front[...]

Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 7 Test5 Judgment If all data is less than ranges, it will be OK. 8 Inspection Judgment If all data is less than ranges, it will be OK. 9 Setting Calibration data When an inspection result is O.K., calibration at[...]

Test Program for Field. 18 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 19 3.5 Memory Test To execute the Memory Test select 02 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Memory Test contains five subtests that test the computer’s mem ory. Move the highlight bar to the subtest you wa[...]

Test Program for Field. 20 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 5. Address pattern test “16 bit write and 16 bit read” of address pattern data is executed and the new data is compared with the original data. Test data = 0000H, 0004H, 0008H, 000CH,...8000H, 8004H, through FFECH Subtest 02 Protected Mode This subtest[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 21 with the original data patterns. Addresses are displayed in 64KB increments during the test. Test Process: 1. Byte Enable Test One bit write/ 8 bit read” is executed and the new data is compared with the original data. Test data = CCAA5533H, 80000000H 2.[...]

Test Program for Field. 22 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Test Process: 1. Checks the memory size to determ ine the maximum size of installed memor y. 2. Tests memory addresses 0 to the m aximum installed. 3. Writes, reads, and compares test data after a m emory refresh cycle (16ms or more). NOTE: There may be a [...]

Test Program for Field. 3.6 Keyboard Test To execute the Keyboard Test select 03 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Keyboard Test contains five subtests that test the computer’s keyboard and mouse actions. Move the highlight bar to the subtest you want to execute and press Enter . NOTE : The Te[...]

Test Program for Field. 24 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Subtest 04 Hot Key Display [9 Key] This subtest is used for the 9 hot key and functions the same as Subtest 1. ECO MUTE MUSIC PLAY BACK NEXT VOL- VOL+ WLAN Subtest 05 Hot Key Display [1 Key] This subtest is used for the 1 hot key and functions the same as [...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 25 LEFT PRESS RIGHT PRESS TOUCH_PAD TEST Please Do Not Press the Left and Right Button At The Same Time[...]

Test Program for Field. 3.7 Display Test To execute the Display Test select 04 from the Diagnostic Test Menu, press Enter and follow the directions displayed on the screen. The Display Test contains twelve subtests that test the display in various modes. Move the highlight bar to the subtest you want to execute and press Enter . Subtest 01 Characte[...]

Test Program for Field. Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Subtest 02 Character Set This subtest displays the character codes 00H - FFH, using Mode 01H (40*25). The screen below displays when this subtest is executed. CHARACTER SET[...]

Test Program for Field. Subtest 03 80 * 25 Character Display This subtest uses 80*25 video resolution to display character codes 20H - 7EH using Mode 03H (80*25). The data displayed is shifted 1 byte to the left for each line as shown below. 80*25 CHARACTER DISPLAY 01234567890123456789012345678901234567890123456789012345678901234567890123456789 !?[...]

Test Program for Field. Subtest 04 320 * 200 Character Display This subtest uses 320*200 video resolution to display green, red and yellow followed by cyan, magenta, and white. The screen below shows the displays when this subtest is executed. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 29 320 * 200 GRAPHICS DISPLAY COLOR SET[...]

Test Program for Field. 320*200 GRAPHICS DISPLAY : [ D ] BLACK D GRAY BLUE L BLUE GREEN L GREEN CYAN L CYAN RED L RED MAGENTA L MAGENTA BROWN YELLOW WHITE I WHITE Press [Enter] KEY Press ENTER to display 64 gradations of red, green, blue and white on the screen 320*200 GRAPHICS DISPLAY : [ 13 ] 30 Satellite P500 and Satellite Pro P500 Tests and Dia[...]

Test Program for Field. Subtest 05 640 * 200 Character Display This subtest uses 640*200 video resolution to display three windows, each window drives a different set of dots: even dots, odd dots and all dots. The screen below displays when this subtest is executed. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 31 Press ENTER t[...]

Test Program for Field. Subtest 06 640 * 480 Character Display This subtest uses 640*350 video resolution to display 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white. The screen below displays when this subtest is executed. 640*35[...]

Test Program for Field. 640*480 GRAPHICS DISPLAY : [12 ] BLACK DARK GRAY BLUE LIGHT BLUE GREEN LIGHT GREEN CYAN LIGHT CYAN RED LIGHT RED MAGENTA LIGHT MAGENTA BROWN YELLOW WHITE INTENSIFIED WHITE Press [Enter] KEY To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press[...]

Test Program for Field. Subtest 07 Display Page This subtest displays video pages zero through seven. DISPLAY PAGE 0 000000000000000000000000000000000000000000000000000000000000000 0............................................................0 0............................................................0 0..........................................[...]

Test Program for Field. Subtest 08 "H" Pattern Display This subtest displays a full screen of "H" patterns. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHH[...]

Test Program for Field. Subtest 10 Color Graphics Display This subtest displays three colors, cyan, white and yellow on the screen as shown below. 640 * 480 GRAPHICS DISPLAY CYAN WHITE YELLOW To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES w[...]

Test Program for Field. Subtest 11 Color Attributes Display This subtest displays 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white. The screen below displays when this subtest is executed. 640*480 COLOR ATTRIBUTE DISPLAY 0 1 2 3 4[...]

Test Program for Field. NOTE: The following screen does not display correctly. It will be amended in the next version. 38 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Press [Enter] Key Press Enter to execute the VRAM mapping test which displays a vertical line at four dot intervals using Mode 12. Press [Enter] Key Press Enter [...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 39 Press [Enter] Key To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu.[...]

Test Program for Field. 40 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Subtest 12 Color Tiling This subtest displays black, gray, white, and 3 gradations of red, green, and blue as shown in the following display. Black Red Green Blue Gray Red Gradation Green Gradation Blue Gradation White Red Gradation Green Gradation Blue Gr[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 41 3.8 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the diagnostics disk and insert the work disk into the FDD. The contents of the floppy disk will be erased. To execute the Floppy Disk Test select 0 5[...]

Test Program for Field. 42 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Subtest 04 Write Specified Address NOTE : The first two digits of the ADDRESS indicate which track is being tested, the next two digits indicates the head, and the last two digits indicate the sector. This subtest allows you to verify the errors from Subte[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 43 3.9 Hard Disk Test To execute the Hard Disk Test select 06 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Hard Disk Test contains eight subtests that test the functions of the hard disk drive. Move the highlight bar[...]

Test Program for Field. 44 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Subtest 04 Cross Talk and Peak Shift This subtest writes eight of the most likely to fail data patterns (shown below) to a cylinder on the HDD, then reads the data while moving from cylinder to cylinder. Data Pattern B5ADADH 4A5252H EB6DB6H 149249H 63B63BH[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 45 Subtest 07 Sequential Write This subtest writes specified data to all cylinders on the HDD. The following message displays on the screen to enter the test data. TEST DATA ????(=37b3H) Subtest 08 W -R-C Specified Address This subtest writes specified data t[...]

Test Program for Field. 3.10 Real Time Clock Test To execute the Real Time Clock Test select 07 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Real Time Clock Test contains three subtests that test the computer’s real time functions. Move the highlight bar to the subtest you want to execute and press Enter[...]

Test Program for Field. Subtest 02 Backup Memory This subtest writes 50 bytes of test data (FFH, AAH, 55H, and 00H) to the CMOS 14 th address, then reads the new data and compares it to the original data. Subtest 03 Real Time Carry CAUTION : When this subtest is executed, the current date and time are reset. This subtest checks the clock’s carry [...]

Test Program for Field. 48 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 3.11 Cache Memory Test To execute the Cache Memory Test select 08 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Cache Memory Test contains eight subtests that test the computer's cache m emory. Move the highli[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 49 Subtest 04 Bit Shift Pattern Test This subtest reads the contents of cache memory and saves it into RAM. The subtest then writes the bit shift data patterns (1 bit shifted every 4 bytes ), reads the new data and compares the result with the original data. [...]

Test Program for Field. 50 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 3.12 High Resolution Display Test To execute the High Resolution Display Test select 09 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The High Resolution Display Test contains six subtests that test the computer's[...]

Test Program for Field. Subtest 02 640*480 Mode Display This subtest uses 640*480 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 51 [ 640*480 256 ] Press [ Enter ]key 0---+---[...]

Test Program for Field. Subtest 03 800 * 600 Mode Display This subtest uses 800*600 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 256 gradations of white, red, green, and blue as shown below. 52 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual [ 800*600 256 ] Press [ Enter ] key 0---[...]

Test Program for Field. Subtest 04 1024* 768 Mode Display This subtest uses 1024*768 video resolution to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 53 [ 1024*768 256 ] Press [ Enter ] key 0--[...]

Test Program for Field. Subtest 05 “H” Pattern Display This subtest uses the 1024*768 Mode to display a high resolution white frame, “H” letters (8*16 pixels fonts), at 128 letters by 48 lines. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHH[...]

Test Program for Field. Subtest 06 Focus Test ( “E” Pattern) This subtest sets the 1024*768 Mode and displays “E” patterns (18*18 dot fonts), at 56 letters *42 lines surrounded by a high resolution white frame. To exit this subtest and return to the High Resolution Display Test menu: Press Enter if NO was selected for Test Loop on the Test [...]

Test Program for Field. 56 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 3.13 Multimedia Test To execute the Multimedia Test select 10 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Multimedia Test contains four subtests that test the computer's m ultimedia functions. Move the highl[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 57 3.14 MEMORY2 Test To execute the Expansion Test select 11 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The MEMORY2 Test contains four subtests that test the computer's. Move the highlight bar to the subtest you w[...]

Test Program for Field. 58 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Tee test method is the same as Subtest2. However, the data to be used differs. 7FFF7FFF7FFF7FFF8000800080008000 BFFFBFFFBFFFBFFF4000400040004000 DFFFDFFFDFFFDFFF2000200020002000 FFFBFFFBFFFBFFFB0004000400040004 FFFDFFFDFFFDFFFD0002000200020002 FFFEFFFEFFFE[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 59 3.15 Error Codes and Error Status Names The following table lists the error codes and error status names for the Diagnostic Tests. Table 3-2 Error codes and error status names (1/2) Device Name Error Code Error Status Name (Common) FF Data Compare Error Me[...]

Test Program for Field. Table 3-2 Error codes and error status names (2/2) Device Name Error Code Error Status Name HDD BB Undefined Error CC Write Fault E0 Status Error F0 No Sense Error ?? Other Error Cache Memory 02 Protect Mode Error 03 Caching Error ?? Other Error Multimedia 01 Write Error 0F Invalid Drive 15 Drive Not Ready ?? Other Error NOT[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 61 3.16 Running Test NOTES : 1. You may add or delete subtests using the Running Test Edit Item function, see Section 3.20. 2. Do not forget to insert a work disk in the FDD. If a work disk is not inserted an error will be generated during the Floppy Disk Tes[...]

Test Program for Field. 62 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 3.17 DMI INFOEMATION Select 03 from the Diagnostics Menu and press Enter to Check or W rite DMI Information Data: 3.17.1 Check DMI Information The Check DMI Configuration program contains the following configuration information for the computer: NOTE: Plea[...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 63 b. Wireless LAN ID ( 001E4CXXXXXX ) c. AC Adapter Select [1]65W [2]75W [3]95W [4]120W Select 1 ~ c to keyin new data , select 0 to exit program , program will com pare input data length with the max length , if over will retry keyin Note : Please Check New[...]

Test Program for Field. 3.18 Log Utilities This function logs error information generated while a test is in progress and stores the results in RAM (Maximum error log : 500 tim es). This function can store data on a floppy disk. If the power switch is turned off, the erro r inform ation will be lost. Error information is displayed in the following [...]

Test Program for Field. Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 65 2. Error information displayed on the screen can be manipulated with the following number keys: The 1 key scrolls the display to the next page. The 2 key scrolls the display to the previous page. The 3 key returns to the Diagnostics Menu. The 4 key erases [...]

Test Program for Field. 3.19 System Configuration Select 05 from the Diagnostics Menu and press Enter to display the following system configuration: SYSTEM CONFIGURATION : * - BIOS VER = VX.XX KBC VER = XXXX * - MAC ADDRESS : XXXXXXXXXXXX * - 0 ASYNC ADAPTER * - 1 HDD DRIVE(S):XXXXXXXXXXXXXXXXXXXXXXXXXX FW Rev.:XXXXXXXX CUR LBA:XXXXXXXX ORG LBA:XXX[...]

Test Program for Field. 3.20 Running Test Edit Item 3.20.1 Function Description Function description lets you add or delete the subtests used to execute the Running Test. The following screen displays after pressing the Tab key to edit an item in the Running Test. KEY OPERATION Ð Cursor Down Ï Cursor Up PgDn Page Down PgUp Page Up Home Top of ITE[...]

Test Program for Field. 68 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual 1. Enter a number or 0 for Loop Count and press Enter . Select a number from 1 to 65535 to define the num ber of times the Running Test executes. Select 0 to run the test continuously until halted by the user. 2. Select the NO or YES for Error Stop and pre[...]

Test Program for Field. 3.21 Common Tests and Operation 3.21.1 How to operate a window To input parameters, or open a window use the following keys. key : to move a highlight bar [Enter] key : to select an item at the highlight bar [Esc] key : to close the current window and go back to the previous window 3.21.2 How to Stop the Test Program To stop[...]

Test Program for Field. 70 Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual Pass Count Displays the number of times the test has been executed. Error Count Displays the number of errors which have occurred during the test. Write Data Displays only the test data that has failed to compare during the test while being written during [...]

Test Program for Field. 3.21.4 Test Stop Display If an error occurs during a Subtest and YES is selected for Error Stop, the following message displays: [HALT OPERATION] 1. Test end 2. Continue 3. Retry * Select 1, 2, or 3 The three selections have the following functions: 1: Terminates the test program and exits to the subtest menu. 2: Continues t[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-i Chapter 4 Replacement Procedures[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-ii Chapter 4 Contents 4.1 Overview ................................................................................................................... .4 - 1 Safety Precautions ................................................................................[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-iii Figures Figure 4-2-1 Rem ove the battery pack.............................................................................. 4-8 Figure 4-2-2 Install the battery pack ................................................................................. 4-9 F[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-iv Figure 4-12-3 Remove the touchpad and touchpad board………………………………..4-41 Figure 4-13-1 Remove the USB Board ............................................................................ 4-43 Figure 4-14-1 Disconnect the power cable .[...]

Replacement Procedures 4 2 4.1 Overview This chapter describes the procedure for rem oving and replacing the fi eld replaceable units (FRUs) in the PC. It may not be necessary to remove all the F RUs in order to replace one. The chart below provides a guide as to whic h other FRUs must be removed before a particular FRU can be removed. The numbers [...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-2 Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the instructions w hile working on the computer. DANGER: 1. In the case of the battery, always use authentic parts or equivalent parts app[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-3 Before You Begin Take note of the following points before star ting work. Always remove the AC adapter and battery pack before commencing any of the procedures. The procedure for removing the battery pack is described in section “4.2 Battery Pack”. 1.[...]

Replacement Procedures Disassembly Procedure Three main types of cable connector are used. • Pressure plate connector • Spring connector • Normal pin connector When disconnecting a pressure plate connector, lift up the tag on one side of the plastic pressure plate on the connector and pull the cab le out from the connect or. W hen reconnectin[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-5 Assembly Procedure After the computer has been disassembled and th e part that caused the fault has been repaired or replaced, the computer must be reassem bled. Take note of the following general points when assembling the computer. • Take your time an[...]

Replacement Procedures Screw Tightening Torque Use the following torque when tightening screws. CAUTION : Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall ou t) causing a short circuit or other damage. NOTE : To tighten screws quickly and accu rately, an electric screwdriver is recommended. ?[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-7 Screw Notation To make maintenance of the co mputer easier, markings of the kinds of the screws including the types and lengths are i ndicated on the computer body. Format: Screw shape + Screw length (mm) Screw shape B: Bind screw F: Thin head screw S: Su[...]

Replacement Procedures 4.2 Battery pack Removing the battery pack The following describes the procedure for rem o ving the battery pack (See Figure 4-2-1). CAUTION: Take care not to short circuit the te rminals when removing the battery pack. Similarly, do not drop, knock, scratch, disassemble, twist, or bend the battery pack. 1. Turn off the power[...]

Replacement Procedures NOTE : Dispose of the used battery pack in a ccordance with the laws and ordinances of your local authority. Installing the battery pack The following describes the procedure for inst alling the battery pack (See Figure 4-2-2). CAUTION: There is a danger that the lithium ion battery pack may explode if not fitted, operated, h[...]

Replacement Procedures 4.3 PC card Removing a PC card The following describes the procedure for removing a PC card (See Figure 4-3-1). CAUTION: Insert or remove a PC card in accordan ce with any instructions in a PC card manual or the manuals of the co mputer system you are using. 1. Push the PC card . It will pop out PCMCIA Card when you release i[...]

Replacement Procedures 1. Make sure the PC card does not stick out. 2. Insert a PC card and press it until it is secu rely connected. Figure 4-3-2 Insert a PC card Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-11[...]

Replacement Procedures 4.4 HDD (Main HDD) Removing a MAIN HDD-H9.5mm / HDD-H12.5mm The following describes the procedure for re moving the main HDD (See Figure 4-4-1 to 4-4- 3). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device. 1. Turn the computer upside down. 2. Remove the followi[...]

Replacement Procedures CAUTION: When a HDD is installed, they are inst alled in the position as the following figure. Figure 4-4-2 Remove the MAIN HDD assembly Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-13[...]

Replacement Procedures 5. Remove the following screws securing the HDD holder and remove the HDD holder . • M3.0 × 3.0B FLAT BIND screw x4 Figure 4-4-3 Remove MAIN HDD Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-14[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-15 Installing MAIN HDD-H9.5mm / HDD-H12.5 mm The following describes the procedure for installing the main HDD. 1. Install a HDD to the HDD holder and secure it with the fo llo wing screws . • M3.0 × 3.5F FLAT BIND screw x4 NOTE: Although they are 3mm he[...]

Replacement Procedures 4.5 Optical disk drive NOTE : Do not apply excessive force to the top of an optical disk drive. Do not touch the shaded portion of the fi gure below, when the drive is removed or installed. Removing an optical disk drive The following describes the procedure for rem o ving an optical disk drive (See Figure 4-5- 1and 4-5-2). 1[...]

Replacement Procedures Figure 4-5-2 Disassemble the side bracket Installing an opt ical disk drive The following describes the procedure fo r installing an optical disk drive. 1. Attach the ODD bracket to an optical disk drive and secur e it with the following screws . • M2.0 × 3.0 Flat BIND screw x2 2. Insert an optical disk drive assembly into[...]

Replacement Procedures 4.6 HDD (SECOND HDD) Removing second HDD-H9.5mm / HDD-H12.5mm The following describes the procedure for re moving the second HDD (See Figure 4-6-1 to 4- 6-3). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device. 4. Turn the computer upside down. 5. Remove the fol[...]

Replacement Procedures CAUTION: When a HDD is installed, they are inst alled in the position as the following figure. Figure 4-6-2 Remove the SECOND HDD assembly Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-19[...]

Replacement Procedures 8. Remove the following screws securing the HDD holder and remove the HDD holder . • M3.0 × 3.0B FLAT BIND screw x4 Figure 4-6-3 Remove the screws and HDD holder Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-20[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-21 Installing Second HDD-H9.5mm / HDD-H12.5mm The following describes the procedure for installing a HDD. 9. Install a HDD to the HDD holder and secure it with the fo llo wing screws . • M3.0 × 3.5F FLAT BIND screw x4 NOTE: Although they are 3mm head scr[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-22 4.7 Memory module CAUTION: The power of the computer must be turned off when you remove a memory module. Remove a memory module with the power on risks damaging the module or the computer itself. Do not touch memory module terminals. Any dirt on the term[...]

Replacement Procedures Figure 4-7-1 Remove memory slot cover Figure 4-7-2 Remove a memory module Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-23[...]

Replacement Procedures Installing a memory module To install a memory module, confirm that the com puter is in boot mode. Then perform the following procedure (See Figure 4-7-3). 1. Insert a memory module into the connector of the com puter slantwise (term inal side first) and press it to connect firmly. CAUTION: The power must be turned off when y[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-25 4.8 Keyboard Removing the keyboard The following describes the procedure for rem oving the keyboard (See Figure 4-8-1). CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the frame and do not touch the keycap. 1. Upside dow[...]

Replacement Procedures Figure 4-8-1 Remove screws for KB Holder Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-26[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-27 Installing the keyboard The following describes the procedure for installing the keyboard. 1. Turn the keyboard upside down and place it on the palm rest as its face do wn. Connect the keyboard flexible cable to the connector on the system board. 2. Slid[...]

Replacement Procedures 4.9 Wireless LAN card Removing a Wireless LAN card The following describes the procedure for re moving a W ireless LAN card (See Figure 4-9-1 to 4-9-2). 1. Remove the following screw of wireless cover securing wireless LAN card cover and remove it. And remove screw of wireless board • 2.5.0 x 4.0B BIND screw x3 2. Disconnec[...]

Replacement Procedures Figure 4-9-2 Remove a wireless LAN card Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-29[...]

Replacement Procedures Installing a Wireless LAN card The following describes the procedure for installing a W ireless LAN card. 1. Insert a wireless LAN card terminals slantwise into the connector on the com puter and press a wireless LAN card and lock the secure screws. 2. Connect the wireless LAN antenna cable to the terminals on a wirele ss L A[...]

Replacement Procedures 4 4.10 Display assembly Removing the display assembly The following describes the procedure for rem o ving the display assembly (See Figure 4-10-1 to 4-10-5). 1. Close the display and turn the computer upside down. 2. Remove the battery pack (See Figure 4-2-1) 3. Open the MAIN HDD Door and remove Optical Drive Disk. Figure 4-[...]

Replacement Procedures Figure 4-10-2 Remove the screws (from bottom side) 6. Disassemble KBD Holder and Keyboard screw (See Figure 4-8-1) 7. Remove the screws from the top side and remove the cover. Figure 4-10-3 Remove the screws (from top side) Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-32[...]

Replacement Procedures 8. Disconnect the FFC and cables. 9. Disassembly TOP ASSY 10. Pull out the wireless LAN antenna and LCD cables from the guide Figure 4-10-4 Remove the Wireless Antenna and LCD cable Opening the display to 135degree, and remove the hinge screw. M2.5 × 6.5 FLAT BIND screw x6 (Locktight) Satellite P500 and Satellite Pro5 00 Mai[...]

Replacement Procedures Figure 4-10-5 Remove the hinge screws 11. Pulling out the pole of hinge from the hole of hinge assembly, rem ove the display assembly from the base assembly. Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-34[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-35 Installing the display assembly The following describes the procedure for installing the display assembly. 1. Inserting the pole of hin ge to the hole of hinge assembly, set the display assembly on the base assembly. 2. Secure the hinges with the followi[...]

Replacement Procedures 4.11 Cover assembly Removing the cover assembly The following describes the procedure for rem oving the cover assembly (See Figure 4-11-1 to 4-11-3). 1. Turn over the computer. 2. Remove the following screws securing the cover assembly from the back and bottom of computer. • M2.5 × 2.0 FLAT BIND screw Back x5 • M2.5 × 6[...]

Replacement Procedures 3. Remove the following screws securing the cover assembly from the front of computer. Pull up and remove the cover assembly from the base assembly . Figure 4-11-2 Remove the screws (front) and cover assembly 4. Disconnect the touch pad flat cable/Fingerprint cable from the connector on the system board. Figure 4-11-3 Disconn[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-38 5. Remove the following screws securing the cover assembly from the front of computer. Pull up and remove the cover assembly from the base assembly . M2.5 × 6.5 FLAT BIND screw Front x7[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-39 Installing the cover assembly The following describes the procedure for installing the cover assembly. 1. Install the cover assembly to the base assem bly. NOTE : Be careful not to catch the cables be tween cover assembly and base assembly. 2. Connect th[...]

Replacement Procedures 4.12 Touch pad Removing the touch pad The following describes the procedure for removing the touch pad (See Figure 4-12-1 to 4- 12-3). 1. Peel off the glass tape and disconnect the touch pad flat cable, Fingerprint cable from the connector on the touch pad. 2. Remove the following screws securing the touch pad plate. • M2.0[...]

Replacement Procedures Figure 4-12-2 Loose the M2.5x3 screw Figure 4-12-3 Remove the touchpad and touchpad board Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-41[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4-42 Installing the touch pad The following describes the procedure for installing the touch pad. 1. Peel off the separator covering on the sensor portion of a new touch pad. NOTE : Do not reuse the touch pad so that it c an not be used after peeling off from[...]

Replacement Procedures 4.13 USB Boa rd The following describes for removing th e cover assembly (See Figure 4-13-1). Removing the USB board 1. Pull out the USB cable, Audio cable, from USB board connector. 2. Loose the below screws and then incline pull out USB board. • M2.5x6.5 FLAT BIND screw x2 Figure 4-13-1 Remove the USB Board Installing the[...]

Replacement Procedures 4.14 System board CAUTION: 1. when handling the system board, always hold by the edges. Do not touch the printed circuit face. 2. if replacing with a new system board, execute the subtest01 Initial configuration in section 3.3 “Setting of the hardware configu ration”. Also update with the latest BIOS as desc ribed in Appe[...]

Replacement Procedures 2. Disconnect the speaker cable, LCD CABLE, ANTE NNA, CRT cable, USB cable, FM CABLE, MDC CABLE, and TV-F ANTENNA from the connector on the system board. 3. Remove the following screws securing the fan and the system board and remove the system board . • M2.5 × 6.5 screw x2 • M2.5 × 6.5 screw x3 Figure 4-14-2 Remove the[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 4 6 Installing the system board The following describes the procedur e for installing the system board. 1. Secure the system board with the following screws . M2.5 × 6.5 screw x3 2. Secure the fan with the following screw s . M2.5 × 6.5 screw x2 3. Connect [...]

Replacement Procedures 4.15 CPU Removing the CPU heat sink The following describes the procedure for rem o ving the CPU heat sink (See Figure 4-15-1 to 4-15-2). 1. Disconnect the Heat sink cable from the connector on the system board 2. Remove the following screws securing the heat sink holder along 1 to 4. • M2 × 2 SPRING screw x4 NOTE: When re[...]

Replacement Procedures 4. Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the counterclockwise with a flat-blade screwdriver. 5. Remove the CPU . Figure 4-15-2 Remove the CPU Installing the CPU The following describes the procedure for installing the CPU (see Figure 4-15-3) 1. Check that the mark of cam is in the unlocking posit[...]

Replacement Procedures Figure 4-15-3 Apply silicon grease 6. Install the CPU heat sink and heat sink holder and secure them with the following screws along 1 to 4. M2 × 2 SPRING screw x4 7. Connect the Heat sink cable to the connector on the system board NOTE: When securing the heat sink holder, be sure to secure the screws in the order of the num[...]

Replacement Procedures 4.16 LCD unit / FL inverter CAUTION: When replacing a LCD, it is required that SVP parameter is set. Update with the latest EC/KBC as describe d in Appendix H “EC/KBC Rewrite Procedures”. Removing the LCD unit / FL inverter The following describes the procedure for removing the LCD unit and FL inverter (See Figure 4-16-1 [...]

Replacement Procedures 3. Pull out one insulator and peel off the other one adhered to the inverter. 4. Disconnect the LCD harnesses from the connectors CN1 on the inverter. 5. Disconnect the HV harnesses from the connectors CN2 on the inverter. 6. Remove the FL inverter while peeling off the double-sided tape . CN1 LCD harness Inverte r Insulator [...]

Replacement Procedures 7. Remove the following screws securing the LCD unit. • M2.5x4.0 screw x2 • M2.5x5.0 screw x8 8. With the bottom edge of the LCD unit on the display cover, lift onl y the top edge of the LCD unit. After peeling off the CONDUTIVE tape , disconnect the LCD harness from the connector on the back of the LCD. 9. Remove the LCD[...]

Replacement Procedures 10. Remove the following screws securing the LCD support (LCD unit side) and rem ove the hinge from the LCD unit. • M2.0x2.5 screw x8 Figure 4-16-4 Remove the LCD hinge Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 53[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 54 Installing the LCD unit/FL Inverter The following describes the procedure for installing the LCD unit and FL inverter. Install the LCD supports (LCD unit side) and hi nge to the LCD and secure them with the following screws . • M2.0 × 2.5 BINK screw x8 [...]

Replacement Procedures 4.17 Application for Thermal pad and g rease on CPU, North Bridge, and VGA board (see Figure 4-17-1 to 4-17-3) I. For Silvis thermal pad on North Bridge and grease on CPU Figure 4-17-1 Intel &AMD Thermal pad on North Bridge RAW PN TSB PN Vendor Description JXTZ1024010 A000048640 THERMAL PAD INT NB BS TZ1(JXTZ1024,3A) XY0G[...]

Replacement Procedures Figure 4-17-2 Apply silicon grease for North Bridge 2. Thermal pad and grease used on VGA thermal module. Figure 4-17-3 Thermal pad position Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 5 6[...]

Replacement Procedures Satellite P500 and Satellite Pro5 00 Maintena nce Manual (9 60-Q08) 5 7 RAW PN TSB PN Vendor Description JXTZ1027010 A000048650 THERMAL PAD VGA V-RAM AD(JXTZ1027,3A) JXTZ1026010 A000048660 THERMAL PAD VGA CHOKE AD(JXTZ1026,3A) XY0GFCM1000 A000018440 THERMAL GREASE GFC-M1 NOTE: Thermal pad is fixed for each one, no need specia[...]

Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) i Appendices[...]

Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) ii[...]

Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) iii Appendix Contents Appendix A Handling the LCD Module ......................................................................... A-1 Appendix B Board Layout ............................................................................................... B-1 B.1 System Board .......[...]

Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) iv C.15 CN 28 VGA Connectors ................................................................................ 15 C.17 CN 23 LAN Connectors................................................................................. 17 C.18 CN 24 USB Board Connectors ............................[...]

Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) v Appendix F Wiring Diagrams .......................................................................................... F-1 F.1 RGB Monitor ID Wraparound Connector .................................................... F-1 F.2 LAN Loopbak Connector ....................................[...]

A-1 Satellite P500 and Satellite Pro500 Maint enance Manual (960-Q08) Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD cove r, be sure[...]

Handling the LCD Module 3. If the panel’s surface gets fingerprint or dust, put on gloves and wipe it with static electricity cloth. If it is still d irty, drop some cleaning alcohol on the surf ace and wipe it again. If the surface is much more fingerprint or dust, w e recommend a CRT cleaning agent. Apply the agent to a cloth and then wipe the [...]

Handling the LCD Module 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. A-3 Satellite P500 and Satelli[...]

Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause m alfunctions[...]

Handling the LCD Module 10. If you transport the module, do not use pack ing material that c ontains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. A-5 Satellite P500 and Satellite Pro500 Maint enance Manual (960-Q08)[...]

Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) Appendix B Appendix B Board Layout B.1 System Board B-1 0 1 0 3 Figure B-1 System board layout (front) 0 2 0 4 0 5 0 6 1 6 1 0 11 1 2 13 1 8 07 09 14 15 17 1 9 21 20 22 24 27 23 26 25 28[...]

Board Layout B-2 Satellite P500 and Satellite Pro500 Maintenance Man ual ( 96 0- Q 08) Figure B-2 System board layout (Back) 36 37 39 29 38 34 33 35 32 3 1 43 30 42 41 40 8[...]

Board Layout Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) B-3 able B-1-1 System board ICs and connectors T NUM Location Function (01) CN 3 SPDIF CONN (02) CN5 Audio&USB CONN (03) CN2 LVDS CONN (04) CN 1 CRT CONN (05) CN 4 MDC CONN (06) CN 8 KB CONN (07) C N2 6 FAN CONN (08) CN30 HDMI IC (09) CN13 TMA CONN (10) CN37 BATT CON[...]

Board Layout B-4 Satellite P500 and Satellite Pro500 Maintenance Man ual ( 96 0- Q 08) (20) CN14 MMB CONN (21) CN 10 WUSB CONN (22) CN 7 TV Tuner CONN (23) CN6 Power/B CONN (24) U2 Audio IC (25) U 1 3 Clock generator (26) U 4 Embedded Controller IC (27) U 9 LAN IC (28) U 27 Card Reader /1394 (29) U35 CPU (30) U4 7 North Bridge (31) CN3 1 DDR CONN ([...]

Board Layout Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) B-5 N (40) CN2 4 ESATA CON (41) CN2 3 RJ45 CONN (42) PCN1 VGA Power CONN (43) CN2 8 VGA CONN .2 Touch Pad Board <Front layout> B Figure B-2-1 Touch Pad board layout (Front) Table B-2-1 Touch Pad board connectors 01 02 03 04[...]

Board Layout NUM Location Function (01) SW1 Mouse Button Left key (02) SW3 Mouse Button Left key (03) SW4 Mouse Button Right key (04) SW2 Mouse Button Right key <Back layout> 01 02 Figure B-2-2 Touch P ad board layout (Back) Table B-2-2 Touch Pad board connectors NUM Location Function (01) CN3 TP Board to TP Module CONN B-6 Satellite P500 and[...]

Board Layout Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) B-7 (02) CN1 TP Board to M/B CONN[...]

Board Layout B.3 Finger Print Board <Front layout> 01 Figure B-3-1 Finger Print Board layout (Front) Table B-3-1 Finger Pr int Board connectors Location Function (01) U2 Finger Printer IC B-8 Satellite P500 and Satellite Pro500 Maintenance Man ual ( 96 0- Q 08)[...]

Board Layout <Back layout> 01 Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) B-9 02 Figure B-3-2 Finger Print Board layout (Back) Table B-3-2 Finger Pr int Board connectors Location Function (01) CN2 Finger Print Board to TP Boar d connect or (02) CN3 Finger Print Board to TP Boar d connect or[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 1 Appendix C Pin Assignment CN2 LCD Panel Connectors PIN No. Signal name I/O PIN No. Signal name I/O 1 VIN --- 2 LCDVCC --- 3 VIN --- 4 LCDVCC --- 5 VIN --- 6 LCD-EDIDDATA I/O 7 +3V --- 8 LCD_EDIDCLK I/O 9 CCD _POWER --- 10 LVDS_VADG I/O 11 MIC_GND --- 12 GND --- 13 I[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 2 CN14 MMB Connector PIN No. Signal name I/O PIN No. Signal name I/O 1 +3VPCU --- 2 +5VPCU --- 3 KEY_INT I 4 GND --- 5 3ND_MBDATA I/O 6 3ND_MBCLK I/O CN 9 Keyboard LED Connectors PIN No. Signal name I/O PIN No. Sig nal name I/O 1 +5V --- 2 BOARD_DI5 O 3 KB_LED_DET# --[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 3 5 --- --- 6 K_LED_P --- 7 MY2 O 8 MY1 O 9 MY0 O 10 MY4 O 11 MY3 O 12 MY5 O 13 MY14 O 14 MY6 O 15 MY7_K O 16 MY3_K O 17 MY7 O 18 MY9 O 19 MY10 O 20 MY11 O 21 MY12 O 22 MY15 O 23 MX7 O 24 MX2 O 25 MX3 O 26 MX4 O 27 MX0 O 28 MX5 O 29 MX6 O 30 MX1 O 31 K_LED_P O 32 CAPS[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 4 CN1 8 Felica Connectors PIN No. Signal name I/O PIN No. Signal name I/O 1 +5V_Felica --- 2 USBP4- I/O 3 USBP4+ I/O 4 GND --- 5 NC --- 6 NC --- CN5 Audio&USB Board Connectors PIN No. Signal name I/O PIN No. Signal name I/O 1 USBP11- I 2 USBP10- I 3 USBP11+ I 4 US[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 5 PIN No. Signal name I/O PIN No. Signal n ame I/O 1 GND --- 2 USBP9- I 3 USBP9+ I 4 CPU SB# I/O 5 --- --- 6 --- --- 7 NEW SMCLK I 8 NEW SMDATA I/O 9 +NEW_1.5V I 10 +NEW_1.5V I 11 PCIE_WAKE# I 12 +NEW_3VAUX O 13 PERST# I/O 14 +NEW_3V I 15 +NEW_3V I 16 NEW_CLKREQ# O 17[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 6 CN 16 RTC Battery Connecto rs PIN No. Signal name I/O PIN No. Signal name I/O 1 RTC_NO2 I 2 GND --- CN1 CRT Connectors PIN No. Signal name I/O PIN No. Sig na l name I/O 1 +5V --- 2 NC 3 GND --- 4 CRT_R1 --- 5 GND --- 6 CRT_G1 --- 7 GND --- 8 CRT_B1 --- 9 GND --- 10 [...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 7 CN37 Battery Connectors PIN No. Signal name I/O PIN No. Signal name I/O 1 MBAT+ --- 2 MBAT+ --- 3 ID O 4 B/I --- 5 TEMP_MBAT O 6 MBDATA I/O 7 MBCLK I/O 8 GND --- 9 GND --- 10 GND --- 11 GND --- 12 GND --- 13 GND --- CN17 MINI PCI-E Card WLAN Connecto r s PIN No. Sig[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 8 25 PCIE_RXP1 O 26 GND --- 27 GND --- 28 +1.5V --- 29 GND --- 30 WL_SMCLK I/O 31 PCIE_TXN0 I 32 WL_SMDATA I/O 33 PCIE_TXP0 I 34 GND --- 35 GND --- 36 USBP3-_B I/O 37 GND --- 38 USBP3+_B I/O 39 NC --- 40 NC --- 41 NC --- 42 NC --- 43 GND --- 44 LED_WLAN# --- 45 CL_CLK[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 9 1 NC --- 2 +3.3V --- 3 XBCCLK-P3P --- 4 GND I/O 5 BCCDET-P3N I/O 6 NC I/O 7 NC I/O 8 NC --- 9 GND --- 10 NC I 11 NC I/O 12 NC --- 13 NC I/O 14 NC I/O 15 GND --- 16 BCIO-P5P I/O 17 BCRST-P3N I/O 18 IVDET-P3P --- 19 BCPWON-P3P I/O 20 NC I/O 21 GND --- 22 RESET# I/O 23[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 10 CN33 DDR Connector s PI N No. Signal name I/O PIN No. Signal name I/O 1 +0.9VSMDDR_VREF_ DIMM --- 2 GND --- 3 GND --- 4 M_B_DQ0 I/O 5 M_B_DQ5 I/O 6 M_B_DQ1 I/O 7 M_B_DQ4 I/O 8 GND --- 9 GND --- 10 M_B_DM0 I 11 M_B_DQS#0 I/O 12 GND --- 13 M_B_DQS0 I/O 14 M_B_DQ7 I/O[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 11 45 M_B_DQ17 I/O 46 M_B_DQ16 I/O 47 GND --- 48 GND --- 49 M_B_DQS#2 I/O 50 PM_EXTTS#1 O 51 M_B_DQS2 I/O 52 M_B_DM2 I 53 GND --- 54 GND --- 55 M_B_DQ23 I/O 56 M_B_DQ18 I/O 57 M_B_DQ22 I/O 58 M_B_DQ19 I/O 59 GND --- 60 GND --- 61 M_B_DQ28 I/O 62 M_B_DQ24 I/O 63 M_B_DQ[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 12 97 M_B_A5 I/O 8 M_B_A4 I/O 99 M_B_A3 I/O 10 0 M_B_A2 I/O 101 M_B_A1 I/O 102 M_B_A0 I/O 103 +1.8VSUS --- 104 +1.8VSUS --- 105 M_B_A10 I/O 106 M_B_BS#1 I 107 M_B_BS#0 I 108 M_B_RAS# I 109 M_B_WE# I 11 0 M_CS#2 I 111 +1.8VSUS --- 112 +1.8VSUS 113 M_B_CAS# I 114 M_OD T[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 13 149 GND --- 150 GND --- 151 M_B_DQ43 I/O 152 M_B_DQ42 I/O 153 M_B_DQ46 I/O 154 M_B_DQ47 I/O 155 GND --- 156 GND --- 157 M_B_DQ52 I/O 158 M_B_DQ53 I/O 159 M_B_DQ49 I/O 160 M_B_DQ48 I/O 161 GND --- 162 GND --- 163 NC --- 164 M_CLK_DDR4 I 165 GND --- 166 M_CLK_DDR#4 I[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 14 CN30 HDMI Connectors PIN No. Signal name I/O PIN No. Sig na l name I/ O 1 HDMITX2P_ C --- 2 GND --- 3 HDMITX2N_ C --- 4 HDMITX1P_ C --- 5 GND --- 6 HDMITX1N_ C --- 7 HDMITX0P_ C --- 8 GND --- 9 HDMITXON_ C I/O 10 HDMICLK+C --- 11 GND --- 12 HDMICLK-C --- 13 CEC ---[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 15 13 GND --- 14 GND --- 15 GND I/O CN28 VGA Connectors PIN No. S P Si ignal name IN No. gnal name 2 PEG_TXN15 1 PEG_RXN15 4 PEG_TXP15 3 PEG_RXP15 6 GND 5 GND 8 PEG_TXN14 7 PEG_RXN14 10 PEG_TXP14 9 PEG_RXP14 12 GND 11 GND 14 PEG_TXN13 13 PEG_RXN13 16 PEG_TXP13 15 PEG_[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 16 50 PEG_TXN7 49 PEG_RXN7 52 PEG_TXP7 51 PEG_RXP7 54 GND 53 GND 56 PEG_TXN6 55 PEG_RXN6 58 PEG_TXP6 57 PEG_RXP6 60 GND 59 GND 62 PEG_TXN5 61 PEG_RXN5 64 PEG_TXP5 63 PEG_RXP5 66 GND 65 GND 68 PEG_TXN4 67 PEG_RXN4 70 PEG_TXP4 69 PEG_RXP4 72 GND 71 GND 74 PEG_TXN3 73 PE[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 17 106 105 Y EXT_HDMI_DDCD AT S SFANON# 108 GND 107 MAINON 110 EXT_LVDS_PNLCL 109 K GFXPG 112 EXT_LVDS_PNLDA 1 T 11 VGA_MBDATA 114 GND 113 VGA_MBCLK 116 EXT_VGA_RED 115 EXT_LVDS_BLON 118 GND 117 EXT_DISP_ON 120 EXT_VGA_GRN 119 DP_HPD 122 GND 121 GND 124 EXT_VGA_BLU 1 [...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 18 156 X 155 X 158 5V 157 X 160 5V 159 3V 162 X 161 3V 164 X 163 3V 166 DP_CAD 165 3V 168 CEC 167 3V 170 GND 169 X 172 EXT_DPTX3N 171 X 174 EXT_DPTX3P 173 DVI_HPD 176 GND 175 GND 178 EXT_DPTX2N 1 X 77 E T_HDMIC LK- 180 EXT_DPTX2P 1 L K+ 79 EXT_HDMIC 182 GND 181 GND 18[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 19 5 X-TX2N --- 6 X-TX1N --- 7 X --- 8 X-TX3N --- -TX3P 9 LAN _ VCC4 -- INKLED# - - 10 LAN _ L -- 11 ACTLED -- ND - LAN _ - 12 LAN _ G -- CN24 USB ecto rs I/O PIN No . Signal name I/O Conn PIN No. Signal name 1 GND --- 2 BUSBP6+ --- 3 BUSBP6- 4 --- USBPWR2 --- 5 GND -[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 20 21 --- --- 22 --- --- 23 GND --- 24 GND --- CN21 5 in 1 Card R tors PIN No. Sig PIN No. S XD C XD C --- SD C MS_D 0_C MS_CD#_C MS_DX/SD_D1_C MS_D0/ XD_D2_C MS _C MS _C MS_ _C I/O SD MS_D 2_C 32 SD_ 1_C I/O 33 MS_BS/XD_D3_C I/O 34 XD_D4_C I/O I/O 36 XD_D6_C I/O 37 M[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 21 41 SM_WPI#/SD_WP_C I 42 D --- 43 GND --- 34 SATA HDD Connectors IN No. l name I/O IN No. l name I/O GN CN P Signa P Signa 1 GND --- 2 SATA_TXP0 O 3 SATA_TXN0 O 4 GND --- 5 SATA_RXN0 _RXP0 I 6 SATA I 7 GND --- 8 +3.3VSATA --- 9 +3.3VSATA VSATA --- 10 +3.3 --- 11 GND[...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 22 7 GND --- _TMA - 8 CLK_PCIE_MINI3 -- 9 CLK_PCIE_MINI3#_TMA 10 GND 11 TMPSPR-GND PR-SXP 12 TMPS 13 CLKDWN# T 14 ALER 15 PLTRST# EQ# 16 CLKR 17 NC 18 NC 19 +3V_TMA_VDD _VDD 2 0 +3V_TMA 21 NC 22 NC 23 NC 24 GND 25 GND 2 6 GND 27 GND GND 28 29 GND 29 GND 31 GND 30 GND [...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 23 19 - 20 NC -- RF_EN_WLAN I 21 --- RST# GND 22 PLT I 23 PCIE_RXN5 O 24 +3V_S5 --- 25 E_RXP5 PCI O 26 GND --- 27 V GND --- 28 +1.5 --- 29 ND I3_SMCLK G --- 30 MIN I/O 31 P XN5 I3_SMDATA CIE_T I 32 MIN I/O 33 D PCIE_TXP5 I 34 GN --- 35 GND --- 36 USBD- I/O 37 GND --- [...]

Pin Assignment Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) 24 CN3 SPDIF Connectors PIN No. Signal name I/O PIN No. Signal name I/O 1 GND --- 2 BOARD_ID2 --- 3 SPK_L- --- 4 SPK_L+ --- 5 SPK_R- --- 6 SPK_R+ ---[...]

Display codes Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) D -1 Appendix. D Appendix D Display Codes D.1 Display Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @ 03 83 1E F0 1E 04 3 # 04 84 26 F0 26 05 4 $ 05[...]

Display codes Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) D -2 Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B F0 2B 35 G 22 A2 34 F0 34 36[...]

Display codes Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) D -3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0 52 E0 D2 E0 70 E0 F0 70 *1 [...]

Display codes Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) D -4 Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 07 F0 07 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — — — *4 203 Win E0 5B E0 DB E0 1F[...]

Display codes Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) D -5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Brea k 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 76 DEL E0 AA E0 53 E0 D3 E0 2A E0 F0 12 E0[...]

Display codes Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) D -6 Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Brea k Make Brea k 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79 ← E0 2A E0 4B E0 CB E0 AA E0 12 E0 6B E[...]

Display codes Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) D -7 Table D-5 Scan codes in overlay mode Code set 1 Code s et 2 Cap No. Keytop Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73 25 O (6) 4D CD 74 F0 74 26 P (–) 4A CA 7B F0 [...]

Display codes Satellite P500 and Satellite Pro500 Maintenance Manual ( 960-Q08) D -8 Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Co mm o n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

Appendix E Key Layout 1. United Status (US) K eyboard Figure US keyboard 2. United Status (US) K eyboard (Backlight) Figure US keyboard (Backlight) E-1 - Satellite P500 and Satellite Pro500 Mainten ance Manual (960-Q08)[...]

3. United Kingdom (UK) K e yboard Figur e UK keyboar d 3. United Kingdom (UK) K e yboard (Backlight) Figur e UK keyboar d (Backlight) E-2 - Satellite P500 and Satellite Pro500 Mainten ance Manual (960-Q08)[...]

Satellite P500 and Satellite Pro500 Maintenanc e Manual (960- Q08 ) F-1 Appendix F Appendix F Wiring Diagrams F.1 RGB Monitor ID Wraparound connector ound connector (15PIN to 15PIN) F.2 LAN Loopback Connector Figure F-1 RGB Monitor ID Wrapar (1) BIBAP ‘ (TX + ) ( 2 ) BIDA N (TX- ) (3) BIDBP (RX+) (4) BIDBN (RX-) Figure F-2 LAN loopback connector [...]

Wiring Diagrams Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) F -2[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Appendix G Appendix G BIOS Rewrite Procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool:  BIOS/EC/KBC rewriting disk  USB doggle Rewriting the BIOS 1. Set the system to bo[...]

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08) Appendix H Appendix H EC/KBC Rewrite Procedures Same as BIOS rewrite Procedures, please refer appendix G[...]

Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08) I-1 Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures ) in maximum configuration. Table I-1 MTBF Component Time (hours) System 6678.00[...]

Reliability Satellite P500 and Satellite Pro500 Maintenan ce Manual (9 60-Q08)[...]