Toshiba satellite p100 инструкция обслуживания

Toshiba Personal Computer Satellite P100 Series Maintenance Manual TOSHIBA CORPORATION File Number 960-Q02[...]

2 Satellite P100 Maintenance Manual (960-Q02) Copyright © 2003 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein. Toshiba Personal Computer Sa[...]

Satellite P100 Maintenance Manual (960-Q02) 3 Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite P100 Series. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and replace them in the field. SAF[...]

4 Satellite P100 Maintenance Manual (960-Q02) The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite P100 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and diagnostic operation[...]

Satellite P100 Maintenance Manual (960-Q02) 5 Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (ROM) Keys Key[...]

6 Satellite P100 Maintenance Manual (960-Q02) Table of Contents Chapter 1 Hardware Overview 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram ...............................................................................................[...]

Satellite P100 Maintenance Manual (960-Q02) 7 Procedure 1 Message Check ....................................................................... 1 4 Procedure 2 Debugging Port Check ............................................................ 1 6 Procedure 3 Diagnostic Test Program Execution Check ............................ 21 Procedure 4 Replacem[...]

8 Satellite P100 Maintenance Manual (960-Q02) 2.9 Display Troubleshooting..............................................................................................35 Procedure 1 External Monitor Check...........................................................35 Procedure 2 Diagnostic Test Program Execution Check .............................35 [...]

Satellite P100 Maintenance Manual (960-Q02) 9 Chapter 3 Test Program for Field 3.1 Tests and Diagnostics Software Overview ................................................................. 3-3 3.2 Executing the Diagnostic Test ................................................................................... 3-4 3.3 Subtest names..................[...]

10 Satellite P100 Maintenance Manual (960-Q02) 3.21.1 How to operate a window …………………………………………3-62 3.21.2 How to Stop the Test Program ……………………………………. 3-62 3.21.3 Test Status Screen …………………………………………………3-62 3.21.4 Test Stop Display…………………?[...]

Satellite P100 Maintenance Manual (960-Q02) 11 4.18 CPU .......................................................................................................................... 4- 47 4.19 VGA heat sink.......................................................................................................... 4- 50 4.20 LCD unit / FL inverter ......[...]

12 Satellite P100 Maintenance Manual (960-Q02) Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout .................................................................................................B-1 Appendix C Pin Assignments..........................[...]

Satellite P100 Maintenance Manual (960-Q02) 13[...]

Chapter 1 Hardware Overview[...]

Chapter 1 Hardware Overview 1-2 Satellite P100 Maintenance Manual(960-Q0 2) 1 Hardware Overview[...]

Hardware Overview Chapter 1 Satellite P100 Maintenance Manual(960-Q02) 1- 1 Chapter 1 Contents 1.1 Features ................................................................................................................... .......1 1.2 System Block Diagram ............................................................................................[...]

Chapter 1 Hardware Overview 1-2 Satellite P100 Maintenance Manual(960-Q0 2) Figures Figure 1-1 Front of the computer a nd the system units configuration ................................6 Figure 1-2 System block diagram ........................................................................................7 Figure 1-3 2.5-inch HDD .................[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 1 Features 1.1 Features The Satellite P100 (Intel Platform) series are 2 spindle PCs running Intel® Celeron® M Processor 410 or higher. Intel® Core™ Solo Processor T1300 or higher. Intel® Core™ Duo Processor T2300 or higher. The features are listed below. θ Microproces[...]

Chapter 1 Hardware Overview 2 Satellite P100 Mainten ance Manual(96 0-Q02) θ VRAM Shared with System RAM for Intel 945 GM. NVIDIA G71M /G72MV/G73M exte rnal graphics for Intel 945 PM. θ HDD 40GB, 60GB, 80GB, 100GB, and 120GB inte rnal drives. 2.5 inch x 9.5mm height. 160GB internal drives. 2.5 inch x 12.7mm height. θ USB FDD (Option) Toshiba ext[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 3 θ PC card slot The PC card slot (PCMCIA) accommodates one 5mm Type II card. The slot support 16-bit PC cards and Card Bus PC cards. Card Bus supports 32-bit PC cards. θ Optical devices A DVD-ROM & CD-R/RW drive or DVD Super Multi drive is equipped. θ Battery The RTC ba[...]

Chapter 1 Hardware Overview 4 Satellite P100 Mainten ance Manual(96 0-Q02) θ Express Card ExpressCard/34 and Expre ssCard/54 are supported. θ Multiple Digital Media Card Slot MD/MS/MS pro/SDIO/MMC are supported θ Bluetooth USB Bluetooth Module (BTO) V2.0 & EDR(Enhanced Data Rate) equipped θ Security Kensington Lock, Fingerprint –Enhanced [...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 5[...]

Chapter 1 Hardware Overview Figure 1-1 Front of the computer an d the system units’ configuration 6 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

Chapter 1 Hardware Overview 1.2 System Block Diagram Figure 1-2 shows the system block diagram. Figure 1-2 System block diagram for Intel Pla tform Platform Satellite P100 Maintenance Manual (960-Q02) 7[...]

Chapter 1 Hardware Overview 8 Satellite P100 Mainten ance Manual(96 0-Q02) The PC contains the following components. θ CPU Intel Core Duo T2300(1.66GHz) T2400(1.83GHz), T2500 (2GHz), T2600(2.16Gz) , T2700(2.33Gz) Intel Core Solo T1400(1.83GHz) T1300 (1.66GHz) FSB : 667MHz Intel Celeron-M (Yonah core based) 410 420 430 FSB 533MHz θ Memory Two memo[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 9 • South Bridge (Intel 82801GBM (ICH7-M)) − PCI slot − PCI Express − IDE controller − Serial ATA Host Controller − DMA controller − USB host interface − USB 2.0 host controller − UHCI host controller − Interrupt controller − SM Bus interface − ACPI Powe[...]

Chapter 1 Hardware Overview 10 Satellite P100 Mainten ance Manual(96 0-Q02) θ Mini Card Wireless LAN card (BTO) 2.4GHz DSSS/OFDM LAN card is equi pped. Conformity with IEEE 802.11b/g and IEEE 802.11a/b/g.. Transfer speed ma ximum is 54Mbit/sec. supports 128bit WEP. θ LAN (Intel) Controls LAN. Intel EP82562T (Ekron) supports 10/100M LAN Intel 8257[...]

Chapter 1 Hardware Overview 1.3 2.5-inch Hard Disk Drive A compact, high-capacity HDD with a height of 9.5mm. Contains a 2.5-inch magnetic disk and magnetic heads. Figure 1-3 shows a view of the 2.5-inch HDD and Tables 1-1 and 1-2 list the specifications. Figure 1-3 2.5-inch HDD Table 1-1 2.5-inch HDD dimensions Standard value Parameter TOSHIBA MK1[...]

Chapter 1 Hardware Overview 12 Satellite P100 Mainten ance Manual(96 0-Q02) Standard value Parameter HITACHI HTS541040G9 SA00 HITACHI HTS541060G9 SA00 HITACHI HTS541080G9 SA00 HITACHI HTS541010G9 SA00 Width (mm) 69.85 Height (mm) 9.5 Depth (mm) 100.0 Outlin e dimen sions Weight (g) 97/ 98 (max.) 101/102(max.) 101/102(max.) 101/10 2(max.) Standard v[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 13 Specification Parameter FUJITSU MHV2120B H FUJITSU MHV2100B H FUJITSU MHV2080B H FUJITSU MHV2060B H FUJITSU MHV2040B H FUJITSU MHV2160BT Storage size (format ted) 120GB 10 0GB 80GB 60GB 40GB 160GB Speed (RPM) 5,400 4,200 Data transfer speed (Mbits/s) 236.1~ 4 65 .0 218~ 429 [...]

Chapter 1 Hardware Overview Specification Parameter HITACHI HTS541040G9 SA 00 HITACHI HTS541040G9 S A00 HITACHI HTS541040G9 SA00 HITACHI HTS541040G9 S A00 Storage size (formatted) 40GB 60GB 80GB 100GB Speed (RPM) 5,400 Data transfer speed(Mbits/s) 493 493 493 493 bus transfer rate (MB/s) 150 ATA7/S ERIAL ATA1.0a/Serial ATAII 1.2 interface support B[...]

Chapter 1 Hardware Overview Specification Parameter HITACHI HTS721060G9AT 00 HITACHI HTS721080G9AT 00 HITACHI HTS721010G9AT 00 Storage size (formatted) 60GB 80GB 100GB Speed (RPM) 7,200 Data transfer speed(Mbits/s) 267-629 bus transfer rate (MB/s) 150 ATA7/SERIA L ATA1.0a/Serial ATAII 1.2 interface support Buffer Size 16385 16385 16385 Track /mm de[...]

Chapter 1 Hardware Overview 1.4 Optical Drive 1.4.1 DVD-ROM & CD-R/RW Drive The DVD-ROM & CD-R/RW drive accommodates e ither 12 cm (4.72-inch) or 8 cm (3.15- inch) CD/DVD-ROM and CD-R/RW. It is a high-performance driv e that reads DVD at maximum 8-speed and CD at m aximum 24-speed. The DVD-ROM & CD-R/RW drive is shown in Figure 1-4. The[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 17 Table 1-4 DVD-ROM & CD-R/RW drive specifications (1/3) Drive Specification Parameter MATSUSHITA (UJDA7 70TT-A) Read (KB/s) DVD-ROM MAX 8X CAV (MAX 10800 KB/s) CD-ROM MAX 24X CAV (MAX 3600 KB/s) Write CD-R 4X , 8X (CLV), 16XZCLV, MAX. 24X(CAV) CD-RW 4X (CLV) High Speed CD[...]

Chapter 1 Hardware Overview 18 Satellite P100 Mainten ance Manual(96 0-Q02) Table 1-4 DVD-ROM & CD-R/RW drive specifications (2/3) Drive Specification Parameter HLDS (GCC-4244N.ATAKN0) Read (KB/s) DVD-ROM Single Layer3.3x -8x (CAV):Approx. 4,710 r/min Dual Layer3.3x -8x (CAV): Approx. 5,180 r/min DVD-Video 1.7x -4x (CAV): Approx. 2,600r/min DVD[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 19 CD CD-ROM Mode1&2S CD-ROM XA Modo2 (Form1&2) CD-DA, CD-I, CD-Extra/CD -Plus, Video-CD Supported disk format DVD DVD-ROM DVD Video DVD-R ( General, Au thoring) DVD-RW (Single/Multi-boarder, Packet) DVD-RAM DVD+R/RW[...]

Chapter 1 Hardware Overview 20 Satellite P100 Mainten ance Manual(96 0-Q02) Table 1-4 DVD-ROM & CD-R/RW drive specifications (3/3) Drive Specification Parameter TSST (TS-L462C/TOHJ,I.) Read (KB/s) CD-ROM Max. 24X (3,600 KB/sec) CAV 24X CD-RW Max. 24X (3,600 KB/sec) CAV 24X DVD-Single Max 8X (10,800 KB/sec) DVD-Dual Max 6 (10,800 KB/sec) Write C[...]

Chapter 1 Hardware Overview 1.4.2 DVD Super Multi Drive The DVD Super Multi drive accommodates eith er 12 cm (4.72-inch) or 8 cm (3.15-inch) CD/DVD-ROM, CD-R/RW, DVD±R/±RW and DVD-RA M. It is a high-performance drive that reads DVD-ROM at maximum 8-speed a nd CD at maximum 24-sp eed. Write speed of DVD±R/±RW and DVD-RAM is differe nt depending [...]

Chapter 1 Hardware Overview 22 Satellite P100 Mainten ance Manual(96 0-Q02) Table 1-6 DVD Super Multi drive specifica tions (1/4) Drive Specification Parameter Panasonic (UJ-850BTJV-A) Read(KB/s) DVD-ROM MAX 8X CAV (MAX 10800 KB/s) CD-ROM MAX 24X CAV (MAX 3600 KB/s) Write CD-R 4X , 8X (CLV) , MAX. 12x, 16x, 24X (ZCLV) CD-RW 4X (CLV) HS-RW 4X, 8X, 1[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 23 Table 1-2 DVD Super Multi drive specifica tions (2/4) Drive Specification Parameter HLDS (GSA-4082N.ATAKN0) Read(KB/s) DVD-R/RW/R OM 8x/8x/8x max. DVD-RAM (Ver.1.0)2x (Ver.2.2)2x, 3x, 5x DVD-Video (CSSCompliant Disc)4x max.(Single/Dual layer ) DVD+R/+RW 8x/8xmax. DVD+R DL4xm[...]

Chapter 1 Hardware Overview 24 Satellite P100 Mainten ance Manual(96 0-Q02) Table 1-6 DVD Super Multi drive specifica tions (3/4) Drive Specification Parameter Pioneer(DVR-K16TBA) Read(KB/s) 8X CAV at DVD-ROM (S ingle Layer),DVD -R/ RW and +R / RW 6X CAV at DVD-ROM (Dual-Layer ), DVD-R DL and +R DL 5X Zone C LV at DVD-R AM 24XCAV at CD-R OM andCD-R[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 25 Table 1-6 DVD Super Multi drive specifica tions (4/4) Drive Specification Parameter TEAC (DV-W28EA) Read(KB/s) 8X CAV at DVD-ROM (Sing le Layer),DVD-R/ +R 4X CAV at DVD-RW / +RW 4X CAV at DVD+R (Dual Layer), D VD-R DL and +R DL 3X-5X Zone CLV at DVD-RAM 24XCAV at CD-R OM 20X[...]

Chapter 1 Hardware Overview 26 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

Chapter 1 Hardware Overview 1.5 Keyboard The Satellite P100 comes with a "desktop-style" keyboard bu ilt into it. This means it is full- sized and features a full set of numeric functi on keys (also known as calculator keys) on the right-hand side. Unlike other notebooks comput ers with smaller keyboards, there is no 'Numeric Mode&ap[...]

Chapter 1 Hardware Overview 1.6 TFT Color Display The TFT color display is 17.1 inch and consis ts of LCD module and FL inverter board. 1.6.1 LCD Module The LCD module used for the TFT color display us es a backlight as the light source and can display with 1,440x 900 dots (WXGA+) or 1,680x1,050 dots(WSXGA+) resolution. Figure 1-7 shows a view of t[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 29 1.6.2 FL Inverter Board The FL inverter board supplies a high freque ncy current to illuminate the LCD module FL. Table 1-10 lists the FL inve rter board specifications. Table 1-8 FL inverter board specifications Specifications Item PI FL9030 SUMIDA IV002 Voltage (V) 8 ~ 20 [...]

Chapter 1 Hardware Overview 30 Satellite P100 Mainten ance Manual(96 0-Q02) 1.7 Power Supply The power supply supplies 23 different voltages to the system board. The power supply microcontroller has the following functions. 1. Judges if the DC power supply (AC adap ter) is connected to the computer. 2. Detects DC output and circuit malfunctions. 3.[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 31 Table 1-9 Power supply output rating Power supply （ Yes/No ） Name Voltage [V] Power OFF Suspend mode Power OFF Boot mode No Battery Object VCC_CORE 1.484 - 0.748 No No No CPU VTT 1.05 No No No CPU, 915GM, ICH4-M +1.8V 1.8 No No No CPU, 915GM,ICH4-M +1.5V 1.2 No No No 915[...]

Chapter 1 Hardware Overview 32 Satellite P100 Mainten ance Manual(96 0-Q02) 1.8 Batteries The PC has the following two batteries. θ Main battery θ Real time clock (RTC) battery Table 1-10 lists the specifica tions for these two batteries. Table 1-10 Battery specification s Battery Name Battery Element Output Voltage Capacity Sanyo 9 cell 10.8v 60[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 33 1.8.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The power supply microprocessor controls power supply and dete cts a full charge when the AC adaptor and battery are connected to the computer. θ Battery Charge When the AC adapt[...]

Chapter 1 Hardware Overview 34 Satellite P100 Mainten ance Manual(96 0-Q02) 1.8.3 RTC Battery The RTC battery provides the power supply to maintain the date, time, and other system information in memory. Table 1-13 lists the Time required for charges of RTC battery and data preservation time. Table 1-13 Time required for charges of RTC battery Cond[...]

Chapter 1 Hardware Overview Satellite P100 Maintenance Manual (960-Q02) 35 1.9 AC Adapter The AC adapter is used to charge the battery. Table 1-14 lists the AC adapter specifications. Table 1-14 AC adapter specifications Parameter Specification With Led DELTA/ LITE-ON DELTA/ LITE-ON DELTA/LITE-ON Power 75W 90W 120W Input voltage AC 100V/240V AC 100[...]

2-1 [CONFIDENT IAL] Chapter 2 Troubleshooting Procedures[...]

2-2 [CONFIDENTIAL] Satellite P100 Maintenance Manual(960-Q02) 2[...]

Satellite P100 Mainten ance Manual(96 0-Q02) 2-3 Chapter 2 Contents 2.1 Troubleshooting .............................................................................................................1 2.2 Troubleshooting Flowchart ............................................................................................3 2.3 Power Supply Troublesho[...]

2-4 [CONFIDENTIAL] Satellite P100 Maintenance Manual(960-Q02)[...]

Satellite P100 Mainten ance Manual(96 0-Q02) 2-5 2.9 Display Troubleshooting ..............................................................................................35 Procedure 1 External Monitor Check ...........................................................35 Procedure 2 Diagnostic Te st Program Execution Check ..........................[...]

2-6 [CONFIDENTIAL] Satellite P100 Maintenance Manual(960-Q02)[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  1 2 2.1 Troubleshooting Chapter 2 describes how to determine which Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction. The FRUs covered are: 1. Power supply 6. Touch pad 11. Wireless LAN 2. System Board 7. Display 12. Sound 3[...]

2 Troubleshooting Procedures There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is descri bed in the figure as line. (2) Pin connection is describe d in the figure as arrow. <e.g.> Connection of modem 2 Satellite P100 Mainten ance Manual[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  3 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-1 as a guide fo r determining which troubleshooting procedures to execute. Before going through the flow chart steps, verify the following:  Ask him or her to enter the passwor d if a password [...]

2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) 4 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) Satellite P100 Maintenance Manual (960-Q02)  5[...]

2 Troubleshooting Procedures 6 Satellite P100 Mainten ance Manual(96 0-Q02) If the diagnostics program cannot detect an e rror, the problem may be intermittent. The Test program should be executed several tim es to is olate the problem. Check the Log Utilities function to confirm which diagnostic test de tected an error(s), and then perform the app[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  7 2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts. To determine if the power supply is functioning properly, start with Procedure 1 and continue with the other Procedures as instructed. The procedur es de[...]

2 Troubleshooting Procedures 8 Satellite P100 Mainten ance Manual(96 0-Q02) Table 2-2 DC IN icon DC IN icon Power supply status Lights green DC power is being supplie d from the AC adapter. Blinks orange Power supply malfunction *1 Doesn’t light Any condition other than those above. *1 When the power supply controller det ects a malfunction, the [...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  9 Procedure 2[...]

2 Troubleshooting Procedures Procedure 3 Connection Check The wiring diagram related to th e power supply is shown below: Any of the connectors may be disconnected. Perform Check 1. Check 1 Make sure the AC adapter and the AC power cord is firmly plugged into the DC IN socket (CN21/34) and wall outlet. If these cables are connected firmly, go to Ch[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  11 Check 4 The battery’s temperature is too high or low. Leave the battery for a while to adjust it in the right temperature. If th e battery pack is s till n ot charged, go to Check 5. Check 5 Replace the battery pack with a new one . If the battery pack [...]

2 Troubleshooting Procedures 12 Satellite P100 Mainten ance Manual(96 0-Q02) Procedure 5 Replacement Check The power is supplied to the system board by the AC adapter. If either the AC adapter or the system board was damaged, perform the following Checks. To disassemble the computer, follow the steps described in Chapter 4, Replacement Procedures .[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  13 2.4 System Board Troubleshooting This section describes how to determ ine if th e system board is malfunctioning or not. Start with Procedure 1 and continue with the other procedures as instructed. The procedures described in this section are: Procedure 1[...]

2 Troubleshooting Procedures 14 Satellite P100 Mainten ance Manual(96 0-Q02) Procedure 1 Message Check When the power is turned on, the system perfor ms the Power On Self Test (POST) installed in the BIOS ROM. The POST tests each IC on the system board and initializes it.  If an error message is shown on the display, perform Check 1.  If ther[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  15 Check 3 The IRT checks the system board. When the IRT detects an error, the system stops or an error message appears. If one of the following error messages (1) th rough (17), (24) or (25) is displayed, go to Procedure 4. If error message (18) is displaye[...]

2 Troubleshooting Procedures Procedure 2 Debugging Port Check Check the MiniPCI Debug board. The tool for debug port test is shown below. Figure 2-2 A set of tool for debug port test The test procedures are follows: 1. Replace Mini PCI debug port with Wireless LAN card, check LED in the Mini PCI debug board The following is a list of the Test Po in[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  17 Code Beeps POST Routine Description 14h Initialize keyboard controller 16h 1-2-2-3 BIOS ROM checksum 17h Initialize cache before memory autosize 18h 8254 timer initialization 1Ah 8237 DMA controller initialization 1Ch Reset Programmable Interrupt Controll[...]

2 Troubleshooting Procedures 18 Satellite P100 Mainten ance Manual(96 0-Q02) 66h Configure advanced cache registers 67h Initialize Multi Processor APIC 68h Enable external and CPU caches 69h Setup System Management Mode (SMM) area 6Ah Display external L2 cache size 6Bh Load custom defaults (optional) 6Ch Display shadow-area message 6Eh Display poss[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  19 Code Beeps POST Routine Description AAh Scan for F2 key stroke ACh Enter SETUP AEh Clear Boot flag B0h Check for errors B2h POST done - prepare to boot operating system B4h 1 One short beep before boot B5h Terminate QuietBoot (optional) B6h Check password[...]

2 Troubleshooting Procedures 20 Satellite P100 Mainten ance Manual(96 0-Q02) Code Beeps For Boot Block in Flash ROM E0h Initialize the chipset E1h Initialize the bridge E2h Initialize the CPU E3h Initialize system timer E4h Initialize system I/O E5h Check force recovery boot E6h Checksum BIOS ROM E7h Go to BIOS E8h Set Huge Segment E9h Initialize M[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  21 Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. These tests check the system board. Refer to Chapter 3, Tests and Diagnostic, for more information on how to perform these tests. 1. System test[...]

2 Troubleshooting Procedures 22 Satellite P100 Mainten ance Manual(96 0-Q02) 2.5 USB FDD Troubleshooting To check if the USB FDD is malfunctioning or not, follow the troubl eshooting procedures below as instructed. Procedure 1: FDD Head Cleaning Check Procedure 2: Diagnostic Te st Program Execution Check Procedure 3: Connector Check and Replacem en[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  23 Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD, tu rn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more information about th e diagnostics test procedures. Make sure the f[...]

2 Troubleshooting Procedures Procedure 3 Connector Check and Replacement Check USB FDD is connected to USB port on system board and US board. US board is also connected to system board by cable. The connect ion of cable and board may be defective. Otherwise, they may be faulty. Disassemble th e computer following the steps described in Chapter 4, R[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  25 Check 2 USB FDD may be fau lty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 Connect USB FDD to each port embedded on system board. If it does not work properly when conn ected to CN12, CN19, CN20 or all ports, perform [...]

2 Troubleshooting Procedures 26 Satellite P100 Mainten ance Manual(96 0-Q02) 2.6 2.5” HDD Troubleshooting To check if 2.5” HDD is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Partition Check Procedure 2: Message Check Procedure 3: Format Check Procedure 4: Diagnostic Te st Program Execution Chec[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  27 Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM. When the test detects an error, an error message is displayed on the screen. Make sure no floppy disk is in the FDD.[...]

2 Troubleshooting Procedures 28 Satellite P100 Mainten ance Manual(96 0-Q02) Procedure 3 Format Check The computer’s HDD is formatted using the MS-DOS FORMAT program or the physical format program of the test program. To fo rmat the HDD, start with Check 1 below and perform the other steps as required. Refer to the MS-DOS Manual for the operation[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  29 Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about the HDD test progr[...]

2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check HDD(s) is/are connected to the connector(s) on the system board. Th e connection of HDD(s) and board may be defective. Otherwise, they may be faulty. Disassemble the com puter following instructions in Chapter 4, Replacement Procedures and perform the following checks. C[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  31 2.7 Keyboard Troubleshooting To check if the computer’s keyboard is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector and Replacement Check Proc[...]

2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure keyboard cable is firmly connected to system bo[...]

2 Troubleshooting Procedures Satellite P100 Maintenance Manual (960-Q02)  33 2.8 Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector and Replacement Check Pr[...]

2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the cable is fi rmly connected to system board.[...]

Troubleshooting Procedures Satellite P100 Mainten ance Manual 35 2.9 Display Troubleshooting To check if the computer’s display is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: External Monitor Check Procedure 2: Diagnostic Te st Program Execution Check Procedure 3: Connector and Cable Check Proce[...]

Troubleshooting Procedures Procedure 3 Connector and Cable Check LCD Module is connected to system board by an LCD/FL cable. FL inverter board is also connected to system board by an LCD/FL cable . And, fluorescent lamp is connected to FL inverter board by HV cable. Their cables may be disconnected from system board or FL inverter board. Disassembl[...]

Troubleshooting Procedures Satellite P100 Mainten ance Manual 37 Procedure 4 Replacement Check Fluorescent lamp, FL inverter, LCD module, HV cable and LCD/FL cable are connected to display circuits. Any of these components may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disassembl e the computer and then perfor[...]

Troubleshooting Procedures 2.10 Optical Disk Drive Troubleshooting To check if optical disk drive is malfunctioni ng or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacem ent Check Procedure 1 Diagnostic Test Program Execution Check Execute t[...]

Troubleshooting Procedures 2.11 Modem Troubleshooting To check if modem is malfunctioning or not, fo llow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacem ent Check Procedure 1 Diagnostic Test Program Execution Check Execute Modem test in the LAN/Mode[...]

Troubleshooting Procedures 40 Satellite P100 Mainten ance Manual Check 2 Modem cable m ay be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 MDC may be faulty. Replace it with a new one following the steps in Ch apter 4. If the problem still occu rs, perform Check 4. Check 4 Cable between MDC and system boar[...]

Troubleshooting Procedures 2.12 LAN Troubleshooting To check if the computer’s LAN is malfunc tioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connector Check and Replacem ent Check Procedure 1 Diagnostic Test Program Execution Check Execute LAN test in t[...]

Troubleshooting Procedures 42 Satellite P100 Mainten ance Manual 2.13 Wireless LAN Troubleshooting To check if the computer's W ireless LAN is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Transm itting-Receiving Check Procedure 2: Antennas' Connection Check Procedure 3: Replacem ent Check [...]

Troubleshooting Procedures Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: Any of the connections may be defective. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures , and perform the following checks: Check 1 Make sure the wirele ss communication switch[...]

Troubleshooting Procedures 44 Satellite P100 Mainten ance Manual Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty. Refer to Chapter 4, Replacement Procedures, for instructions on how to disa ssemble the computer and th en perform the following checks: Check 1 Wireless LAN antenna may be faulty. Rep[...]

Troubleshooting Procedures 2.14 Sound Troubleshooting To check if the sound function is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check Procedure 2: Replacem ent Check Procedure 1 Connector Check The connection of sound system is shown in the following figure. As the connection may be d[...]

Troubleshooting Procedures 46 Satellite P100 Mainten ance Manual Procedure 2 Replacement Check  If External microphone/Headphone does not work properly, perform check 1.  If Internal microphone /Speaker does not work properly, perform check 2.  If HP out &SPDIF does not work properly, perform check 3.  If Line in/ Volume control doe[...]

Troubleshooting Procedures 2.15 VGA Troubleshooting Procedure 1 Diagnostic Test Program Execution Check Execute VGA test in the test program. Refer to Chapter 3, Tests and Diagnostics for more information on how to perform the test program . If any error is detected, perform Procedure 2. Procedure 2 Connector Check and Replacement Check VDC (VGA Da[...]

Troubleshooting Procedures 48 Satellite P100 Mainten ance Manual Check 5 System board may be faulty. Replace it with a new one f ollowing the instruction in Chapter 4.[...]

Troubleshooting Procedures 2.16 Fingerprint Troubleshooting To check if the computer’s Fingerprint is ma lfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check and Replacem ent Check Procedure 1 Diagnostic Test Program Execution Check Execute Fingerprint test in the test program . Refer to Cha[...]

Troubleshooting Procedures 2.17 Bluetooth Troubleshooting To check if the computer’s B lue tooth is malfunctioning or not, follow the troubleshooting procedure below as instructed. Procedure 1: Connector Check and Replacem ent Check Procedure 1 Connector Check and Replacement Check The B lue tooth function is connected to system board. If B lue t[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 1 Chapter 3 Diagnostic Programs[...]

Test Program for Field. 2 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Chapter 3 Contents 3.1 Tests and Diagnostics Software Overview ............................................................ 3-3 3.2 Executing the Diagnostic Test ............................................................................... 3-4 3.3 Subtest[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3 3.1 Tests and Diagnostics Software Overview This chapter explains how to use the Tests and Diagnostics Software for the Satellite P100 and Satellite Pro P100 computer systems. NOTES : Before starting the Tests and Diagnostics software: 1. Check all cables f[...]

Test Program for Field. 4 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.2 Executing the Diagnostic Test DOS is required to run the Diagnostics Program. To start the programs follow these steps: 1. Create a DOS bootable disk and copy all the files from the Tests and Diagnostics software to the disk. 2. Insert the boot disk int[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 5 The following menu displays: :Select item Enter:Decision item Esc:Escape TOSHIBA Satellite(Pro) P100 Diagnostics Version V1.00 (C) Copyright QUANTA Corp. 2005- [ DIAGNOSTICS MENU ] 01. DIAGNOSTIC TEST 02. RUNNING TEST 03. DMI INFORMATION 04. LOG UTILITIES 0[...]

Test Program for Field. 6 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Refer to Sections 3.4 through 3.14 for detailed descriptions of Diagnostics Tests 1 through 11. Item 88 sets the floppy disk drive and hard disk drive error retry count. Item 99 exits the submenu of the Diagnostic Test and returns to the Diagnostics Menu. 4[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 7 Use the arrow keys to highlight the desired option and press Enter . Go To Test Move the highlight bar to Go To Test and press Enter to start executing the test. Test Loop Select NO to return the screen to the subtest menu after the test is com plete. Selec[...]

Test Program for Field. 8 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.3 Subtest names Table 3-1 lists the subtest names for each test program in the Diagnostic Test menu. Table 3-1 Subtest Names(1/3) No. Test Name No. Subtest Name 01 SYSTEM TEST 01 02 03 04 05 FAN ON/OFF check Battery TEST CPU Temperature CIR Remote Control[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 9 Table 3-1 Subtest Names(2/3) No. Test Name No. Subtest Name 05 FLOPPY DISK TEST 01 02 03 04 05 Sequential Read Sequential W/R/C Random Address/Data Write Specified Address Read Specified Address 06 HARD DISK TEST 01 02 03 04 05 06 07 08 Sequential Read Addr[...]

Test Program for Field. 10 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Table 3-1 Subtest Names(3/3) No. Test Name No. Subtest Name 10 MULTIMEDIA TEST 01 02 03 04 Sequential Read Test Random Read Test Read Specified Address Test 1 point W/R/C Test 11 MEMORY2 01 02 03 04 All one/zero Test Walking 1/Walking 0 Test(Left) Walking [...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 11 3.4 System Test To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The System Test contains two subtests. Move the highlight bar to the subtest you want to execute and press Enter . Subt[...]

Test Program for Field. 12 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 03 CPU Temperature This will display CPU Temperature for check , press [ESC] to exit . [CPU_TEMP.EXE] Program Version : 1.0 08-08-2005 CPU Temperature : XX Subtest 04 CIR Remote Control Test When you execute this subtest, the remo te control layout[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 13 3.5 Memory Test To execute the Memory Test select 02 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Memory Test contains five subtests that test the computer’s mem ory. Move the highlight bar to the subtest you wa[...]

Test Program for Field. 14 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 5. Address pattern test “16 bit write and 16 bit read” of address pattern data is executed and the new data is compared with the original data. Test data = 0000H, 0004H, 0008H, 000CH,...8000H, 8004H, through FFECH Subtest 02 Protected Mode This subtest[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 15 Test Process: 1. Checks the memory size to determ ine the maximum size of installed memor y. 2. Tests memory addresses 0 to the m aximum installed. 3. Writes, reads, and compares test data after a m emory refresh cycle (16ms or more). NOTE: There may be a [...]

Test Program for Field. 16 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.6 Keyboard Test To execute the Keyboard Test select 03 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Keyboard Test contains seven subtests that test the computer’s keyboard and mouse actions. Move the highlight[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 17 Subtest 03 Hot Key Display [6 Key] This subtest is used for the 6 hot key and functions the same as Subtest 1. Subtest 04 Hot Key Display [7 Key] This subtest is used for the 7 hot key and functions the same as Subtest 1. Subtest 05 Keyboard LED The LED di[...]

Test Program for Field. 18 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual LEFT PRESS RIGHT PRESS TOUCH_PAD TEST Please Do Not Press the Left and Right Button At The Same Time[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 19 3.7 Display Test To execute the Display Test select 04 from the Diagnostic Test Menu, press Enter and follow the directions displayed on the screen. The Display Test contains twelve subtests that test the display in various modes. Move the highlight bar to[...]

Test Program for Field. 20 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Subtest 02 Character Set This subtest displays the character codes 00H - FFH, using Mode 01H (40*25). [...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 21 Subtest 03 80 * 25 Character Display This subtest uses 80*25 video resolution to display character codes 20H - 7EH using Mode 03H (80*25). The data displayed is shifted 1 byte to the left for each line as shown below. To exit this subtest and return to the[...]

Test Program for Field. 22 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 04 320 * 200 Character Display This subtest uses 320*200 video resolution to display green, red and yellow followed by cyan, magenta, and white. The screen below shows the displays when this subtest is executed. Press ENTER to display the following[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 23 Press ENTER to display 64 gradations of red, green, blue and white on the screen To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for [...]

Test Program for Field. 24 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 05 640 * 200 Character Display This subtest uses 640*200 video resolution to display three windows, each window drives a different set of dots: even dots, odd dots and all dots. The screen below displays when this subtest is executed. Press ENTER t[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 25 Subtest 06 640 * 480 Character Display This subtest uses 640*350 video resolution to display 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified [...]

Test Program for Field. 26 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. 640*480 GRAPHICS DISPLAY : [12 ] BLACK DARK[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 27 Subtest 07 Display Page This subtest displays video pages zero through seven. To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Tes[...]

Test Program for Field. 28 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 08 "H" Pattern Display This subtest displays a full screen of "H" patterns. To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break i[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 29 Subtest 10 Color Graphics Display This subtest displays three colors, cyan, white and yellow on the screen as shown below. To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. P[...]

Test Program for Field. 30 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 11 Color Attributes Display This subtest displays 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white. The screen below displays wh[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 31 NOTE: The following screen does not display correctly. It will be amended in the next version. Press Enter to execute the VRAM mapping test which displays a vertical line at four dot intervals using Mode 12. Press Enter to display VRAM mapping test using t[...]

Test Program for Field. 32 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual To exit this subtest and return to the Display Test m enu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES was selected for Test Loop on the Test Parameter Menu. Press [Enter] Key[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 33 Subtest 12 Color Tiling This subtest displays black, gray, white, and 3 gradations of red, green, and blue as shown in the following display. Black Red Green Blue Gray Red Gradation Green Gradation Blue Gradation White Red Gradation Green Gradation Blue Gr[...]

Test Program for Field. 34 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.8 Floppy Disk Test CAUTION : Before running the floppy disk test, prepare a formatted work disk. Remove the diagnostics disk and insert the work disk into the FDD. The contents of the floppy disk will be erased. To execute the Floppy Disk Test select 0 5[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 35 Subtest 04 Write Specified Address NOTE : The first two digits of the ADDRESS indicate which track is being tested, the next two digits indicates the head, and the last two digits indicate the sector. This subtest allows you to verify the errors from Subte[...]

Test Program for Field. 36 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.9 Hard Disk Test To execute the Hard Disk Test select 06 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Hard Disk Test contains eight subtests that test the functions of the hard disk drive. Move the highlight bar[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 37 Subtest 04 Cross Talk and Peak Shift This subtest writes eight of the most likely to fail data patterns (shown below) to a cylinder on the HDD, then reads the data while moving from cylinder to cylinder. Data Pattern B5ADADH 4A5252H EB6DB6H 149249H 63B63BH[...]

Test Program for Field. 38 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 07 Sequential Write This subtest writes specified data to all cylinders on the HDD. The following message displays on the screen to enter the test data. TEST DATA ????(=37b3H) Subtest 08 W-R-C Specified Address This subtest writes specified data to[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 39 3.10 Real Time Clock Test To execute the Real Time Clock Test select 07 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Real Time Clock Test contains three subtests that test the computer’s real time functions. Mov[...]

Test Program for Field. 40 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 02 Backup Memory This subtest writes 50 bytes of test data (FFH, AAH, 55H, and 00H) to the CMOS 14 th address, then reads the new data and compares it to the original data. Subtest 03 Real Time Carry CAUTION : When this subtest is executed, the cur[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 41 3.11 Cache Memory Test To execute the Cache Memory Test select 08 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Cach e Memory Test contains eight subtests that test the computer's cache m emory. Move the highl[...]

Test Program for Field. 42 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 04 Bit Shift Pattern Test This subtest reads the contents of cache memory and saves it into RAM. The subtest then writes the bit shift data patterns (1 bit shifted every 4 bytes ), reads the new data and compares the result with the original data. [...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 43 3.12 High Resolution Display Test To execute the High Resolution Display Test select 09 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The High Resolution Display Test contains six subtests that test the computer's[...]

Test Program for Field. 44 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual [ 640*480 256 ] Press [ Enter ]key 0---+---1---+---2---+---3---+---4---+---5---+---6--- 256 letter types indication WHITE RED GREEN BLUE Subtest 02 640*480 Mode Display This subtest uses 640*480 video resolution to display a high resolution white frame, 25[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 45 [ 800*600 256 ] Press [ Enter ] key 0---+---1---+---2---+---3---+---4---+---5---+---6--- 256 letter ty pes indication WHITE RED GREEN BLUE Subtest 03 800 * 600 Mode Display This subtest uses 800*600 video resolution to display a high resolution white frame[...]

Test Program for Field. 46 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual [ 1024*768 256 ] Press [ Enter ] key 0---+---1---+---2---+---3---+---4---+---5---+---6--- 256 letter ty pes indication WHITE RED GREEN BLUE Subtest 04 1024* 768 Mode Display This subtest uses 1024*768 video resolution to display a high resolution white fra[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 47 Subtest 05 “H” Pattern Display This subtest uses the 1024*768 Mode to display a high resolution white frame, “H” letters (8*16 pixels fonts), at 128 letters by 48 lines. To exit this subtest and return to the High Resolution Display Test m enu: Pre[...]

Test Program for Field. 48 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual Subtest 06 Focus Test ( “E” Pattern) This subtest sets the 1024*768 Mode and displays “E” patterns (18*18 dot fonts), at 56 letters *42 lines surrounded by a high resolution white frame. To exit this subtest and return to the High Resolution Displa[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 49 3.13 Multimedia Test To execute the Multimedia Test select 10 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Multimedia Test contains four subtests that test the computer's m ultimedia functions. Move the highl[...]

Test Program for Field. 50 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.14 MEMORY2 Test To execute the Expansion Test select 11 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The MEMORY2 Test contains four subtests that test the computer's. Move the highlight bar to the subtest you w[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 51 Tee test method is the same as Subtest2. However, the data to be used differs. 7FFF7FFF7FFF7FFF8000800080008000 BFFFBFFFBFFFBFFF4000400040004000 DFFFDFFFDFFFDFFF2000200020002000 FFFBFFFBFFFBFFFB0004000400040004 FFFDFFFDFFFDFFFD0002000200020002 FFFEFFFEFFFE[...]

Test Program for Field. 52 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.15 Error Codes and Error Status Names The following table lists the error codes and error status names for the Diagnostic Tests. Table 3-2 Error codes and error status names (1/2) Device Name Error Code Error Status Name (Common) FF Data Compare Error Me[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 53 Table 3-2 Error codes and error status names (2/2) NOTE: If error status name is Other Error , please reference the Error Code for error information Device Name Error Code Error Status Name HDD BB Undefined Error CC Write Fault E0 Status Error F0 No Sense [...]

Test Program for Field. 54 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.16 Running Test NOTES : 1. You may add or delete subtests using the Running Test Edit Item function, see Section 3.20. 2. Do not forget to insert a work disk in the FDD. If a work disk is not inserted an error will be generated during the Floppy Disk Tes[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 55 3.17 DMI INFOEMATION Select 03 from the Diagnostics Menu and press Enter to Check or W rite DMI Information Data: 3.17.1 Check DMI Information The Check DMI Configuration program contains the following configuration information for the computer: NOTE: Plea[...]

Test Program for Field. 56 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual length with the max length , if over will retry keyin Note : Please Check New DMI Information After System Restart !! 1. **** Manufacture Name ( TOSHIBA ) - (15) 2. **** Product Name ( Satellite XXXXXX ) - (31) 3. **** Part Number ( PSL20X-XXXXXX ) - (15) [...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 57 3.18 Log Utilities This function logs error information generated while a test is in progress and stores the results in RAM (Maximum error log : 500 tim es). This function can store data on a floppy disk. If the power switch is turned off, the erro r infor[...]

Test Program for Field. 58 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 2. Error information displayed on the screen can be manipulated with the following number keys: The 1 key scrolls the display to the next page. The 2 key scrolls the display to the previous page. The 3 key returns to the Diagnostics Menu. The 4 key erases [...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 59 3.19 System Configuration Select 05 from the Diagnostics Menu and press Enter to display the following system configuration: SYSTEM CONFIGURATION : * - BIOS VER = VX.XX KBC VER = XXXX * - MAC ADDRESS : XXXXXXXXXXXX * - 0 ASYNC ADAPTER * - 1 HDD DRIVE(S):XX[...]

Test Program for Field. 60 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.20 Running Test Edit Item 3.20.1 Function Description Function description lets you add or delete the subtests used to execute the Running Test. The following screen displays after pressing the Tab key to edit an item in the Running Test. KEY OPERATION ?[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 61 1. Enter a num ber or 0 for Loop Count and press Enter . Select a number from 1 to 65535 to define the num ber of times the Running Test executes. Select 0 to run the test continuously until halted by the user. 2. Select the NO or YES for Error Stop and pr[...]

Test Program for Field. 62 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.21 Common Tests and Operation 3.21.1 How to operate a w i ndow To input parameters, or open a window use the following keys. key : to move a highlight bar [Enter] key : to select an item at the highlight bar [Esc] key : to close the current window and go[...]

Test Program for Field. Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 63 Pass Count Displays the number of times the test has been executed. Error Count Displays the number of errors which have occurred during the test. Write Data Displays only the test data that has failed to compare during the test while being written during [...]

Test Program for Field. 64 Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 3.21.4 Test Stop Display If an error occurs during a Subtest and YES is selected for Error Stop, the following message displays: * Select 1, 2, or 3 The three selections have the following functions: 1: Terminates the test program and exits to the subtest [...]

Satellite P100 Maintenanc e Manua l (960-Q02) 4-i Chapter 4 Replacement Procedures[...]

Replacement Procedures 4-ii Satellite P100 Main tenance Manu al (960-Q02) 4[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-iii Chapter 4 Contents 4.1 Overview ................................................................................................................... .4 - 1 Safety Precautions ................................................................................................ 4-2 [...]

Replacement Procedures 4-iv Satellite P100 Main tenance Manu al (960-Q02) Figures Figure 4-1 Removing the battery pack................................................................................. 4-8 Figure 4-2-1 Removing a PC card ...................................................................................... 4-10 Figure 4-3-2 Insert a [...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-v Figure 4-31 Removing the display mask ............................................................................. 4-52 Figure 4-32 Removing the FL inverter ................................................................................ 4-53 Figure 4-33 Removing the LCD unit[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-1 4 2 4.1 Overview This chapter describes the procedure for rem oving and replacing the fi eld replaceable units (FRUs) in the PC. It may not be necessary to remove all the F RUs in order to replace one. The chart below provides a guide as to whic h other FRUs must be removed be[...]

Replacement Procedures 4-2 Satellite P10 0 Main tenance Manual (960 -Q02) Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the instructions w hile working on the computer. DANGER: 1. In the case of the battery, always use authentic parts or equivalent parts approved by Toshiba. Oth[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-3 Before You Begin Take note of the following points before star ting work. Always remove the AC adapter and battery pack before commencing any of the procedures. The procedure for removing the battery pack is described in section “4.2.1 Battery Pack”. 1. Do not disassemble [...]

Replacement Procedures 4-4 Satellite P10 0 Main tenance Manual (960 -Q02) Disassembly Procedure Three main types of cable connector are used. • Pressure plate connector • Spring connector • Normal pin connector When disconnecting a pressure plate connector, lift up the tag on one side of the plastic pressure plate on the connector and pull th[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-5 Assembly Procedure After the computer has been disassembled and th e part that caused the fault has been repaired or replaced, the computer must be reassem bled. Take note of the following general points when assembling the computer. • Take your time and follow the instructi[...]

Replacement Procedures 4-6 Satellite P10 0 Main tenance Manual (960 -Q02) Screw Tightening Torque Use the following torque when tightening screws. CAUTIO N : Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall out) causing a short circuit or other damage. NOTE : To tighten screws quickly and accu[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-7 Screw Notation To make maintenance of the co mputer easier, markings of the kinds of the screws including the types and lengths of the screws are indicated on the computer body. Format: Screw shape + Screw length (mm) Screw shape B: Bind screw F: Thin head screw S: Super thin [...]

Replacement Procedures 4-8 Satellite P10 0 Main tenance Manual (960 -Q02) 4.2 Battery pack Removing the battery pack The following describes the procedure for re m oving the battery pack (See Figure 4-1). CAUTION: Take care not to short circuit the te rminals when removing the battery pack. Similarly, do not drop, knock, scratch, disa ssemble, twis[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-9 NOTE : Dispose of the used battery pack in acco rdance with the laws and ordinances of your local authority. Installing the battery pack The following describes the procedure for inst alling the battery pack (See Figure 4-1). CAUTION: There is a danger that the lith ium ion ba[...]

Replacement Procedures 4-10 Satellite P10 0 Main tenance Manual (960 -Q02) 4.3 PC card Removing a PC card The following describes the procedure for removing a PC card (See Figure 4-2-1). CAUTION: Insert or remove a PC ca rd in accord ance with any instructions in a PC card manual or the manuals of the com puter system you are using. 1. Push the eje[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-11 Installing a PC card The following describes the procedure for inserting a PC card (See Figure 4-2-2). 1. Make sure the eject button does not stick out. 2. Insert a PC card and press it until it is securely connected. Figure 4-2-2 Insert a PC card[...]

Replacement Procedures 4-12 Satellite P10 0 Main tenance Manual (960 -Q02) 4.4 HDD Removing a HDD The following describes the procedure fo r removing a HDD (See Figure 4-3 to 4-4). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure m ay cause data loss or damage to the device. 1. Turn the computer upside down. 2. Remove the fol[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-13 CAUTION: When a HDD is installed, they are in stalled in the position as the following figure. Figure 4-3 Removing the HDD assembly HDD Door M3.0x3.5B FLAT BIND HDD module CN 19 M2.5x4.0B FLAT BIND[...]

Replacement Procedures 4-14 Satellite P10 0 Main tenance Manual (960 -Q02) 5. Remove the following screws securing the HDD holder and remove the HDD holder . • M3.0 × 3.5B FLAT BIND screw x4 Figure 4-4 Removing a HDD HDD holder HDD M3.0x3.5 FLAT BIND[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-15 Installing a HDD The following describes the procedure for installing a HDD (See Figure 4-3 to 4-4). 1. Install a HDD to the HDD holder and secure it with the follo wing screws . • M3.0 × 3.5F FLAT BIND screw x4 NOTE: Although they are 3mm head screws, scre w torque m ust [...]

Replacement Procedures 4-16 Satellite P10 0 Main tenance Manual (960 -Q02) 4.5 Wireless LAN card Removing a Wireless LAN card The following describes the procedure for re m oving a Wireless LAN card (See Figure 4-5). 1. Remove the following screw of wireless cover securing wireless LAN card cover and remove it. And remove screw of wireless board ?[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-17 Installing a Wireless LAN card The following describes the procedure for inst alling a Wireless LAN card (See Figure 4-5). 1. Insert a wireless LAN card terminals slantwise into the connector CN30 on the computer and press a wireless LAN card and lock the secure s crews. 2. C[...]

Replacement Procedures 4-18 Satellite P10 0 Main tenance Manual (960 -Q02) 4.6 Memory module CAUTION: The power of the computer must be turned off when you remove a memory module. Removing a memory module w ith the power on risks dam aging the module or the computer itself. Do not touch memory module terminal s. Any dirt on the terminals may cause [...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-19 Figure 4-6 Removing a memory module Memory Module Cove r[...]

Replacement Procedures 4-20 Satellite P10 0 Main tenance Manual (960 -Q02) Installing a memory module To install a memory module, confirm that the com puter is in boot mode. Then perform the following procedure (See Figure 4-7). 1. Insert a me mo r y mo d u l e into the connector of the com puter slantwise (term inal side first) and press it to con[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-21 4.7 Keyboard Removing the keyboard The following describes the procedure for rem o ving the keyboard (See Figure 4-8 to 4-9). CAUTION: As the keycap m ay fall out, when ha ndling the keyboard always hold it by the frame and do not touch the keycap. 1. T urn the computer upsid[...]

Replacement Procedures 4-22 Satellite P10 0 Main tenance Manual (960 -Q02) Figure 4-8 Removing screws for KBD cover/keyboard Figure 4-9 Removing the keyboard/KBD cover KBD cover Keyboard Screw 2. 5 x3.0[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-23 Installing the keyboard The following describes the procedure for inst alling the keyboard (See Figure 4-8 to 4-9). 1. Turn the keyboard upside down and place it on the palm rest as its face down. Connect the keyboard flexible cable to the connector CN3200 on the system board[...]

Replacement Procedures 4-24 Satellite P10 0 Main tenance Manual (960 -Q02) 4.8 Function Button Board Removing the Function Board The following describes the procedure for re m oving the Function board (See Figure 4-10). 1. Remove the following screw securing the switch membrane. • M2.5 × 3.0B FLAT BIND screw x3 2. Unlock the Function board cable[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-25 Installing the Function Board The following describes the procedure for installing the switch m embrane. 1. Press Function board in the computer. 2. Secure the Function board with the following screw . • M2.5 × 3.0B FLAT BIND screw x3[...]

Replacement Procedures 4-26 Satellite P10 0 Main tenance Manual (960 -Q02) 4.9 Optical disk drive NOTE : Do not apply excessive force to th e top of an optical disk drive. Do not touch the shaded portion of the fi gure below, when the drive is removed or installed. Removing an optical disk drive The following describes the procedure for re m oving [...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-27 Figure 4-12 Disassembling the side bracket Installing an opt ical disk drive The following describes the procedure for inst alling an optical disk drive (See Figure 4-11 and 4-12). 1. Attach the ODD bracket to an optical disk drive a nd secure it with the following screws . ?[...]

Replacement Procedures 4-28 Satellite P100 Main tenance Man ual (960-Q02) 4 4.10 Display assembly Removing the display assembly The following describes the procedure for rem o ving the display assembly (See Figure 4-13 to 4-17). 1. Close the display and turn the computer upside down. 2. Open the MINIPCI Door and remove the wireless LAN screws and a[...]

Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-29 3. Open the display and removing the k/b cover and keyboard . Figure 4-14 Removing keyboard cover 4. Disassembly Function board and pull out the wireless LAN antenna and LCD cables from the guide, If there was Bluetooth Ante nna, pls. also remove it ( the 5th point) Figure 4-2[...]

Replacement Procedures 4-30 Satellite P100 Main tenance Man ual (960-Q02) 4. Opening the display to 180 degree, and remove the hinge screw . ‧ M2.5 × 6.0 FLAT BIND screw x4 (Locktight) . . Figure 4-36 Removing the hinge screw M2.5x6.0 FLAT BIND (Locktight) M2.5x6.0 FLAT BIND (Locktight)[...]

Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-31 5. Remove the LCD harness from the connector on the system board and pulling out the pole of hinge from the hole of hinge assembly, remove the display assembly from the base assembly. . Figure 4-17 Removing the LCD harne ss and remove display assembly Display assembly Base ass[...]

Replacement Procedures 4-32 Satellite P100 Main tenance Man ual (960-Q02) Installing the display assembly The following describes the procedure for instal ling the display assem bly (See Figure 4-13 to 4-17). 1. Inserting the pole of hinge to the hole of hinge assem bly, set the display assembly on the base assembly. 2. Secure the hinges with the f[...]

Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-33 4.11 Bluetooth The following describes fo r installing th e display assembly (See Figure 4-18). Removing the Bluetooth 1. Pull out the Bluetooth cable connect from Bluetooth board 2. Loose the below screw and pull out the MB->BT cable. z M2.3x3.0 x2 Figure 4-18 Removing the[...]

Replacement Procedures 4-34 Satellite P100 Main tenance Man ual (960-Q02) 4.12 Cover assembly Removing the cover assembly The following describes the procedure for removing the cover assembly (See Figure 4-19 to 4-21). 1. Turn over the computer. 2. Remove the following screws securing the cover assembly from the back and bottom of computer. • M2.[...]

Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-35 Figure 4-40 Removing the screws (back) 3. Disconnect the touch pad flat cable/Fin gerprint cable/Top LENS from the connector on the system board. Screws 2.5*6 Screws 2.5*6 Screws 2.5*4[...]

Replacement Procedures 4-36 Satellite P100 Main tenance Man ual (960-Q02) 4. Pull up and remove the cover assembly from the base assembly . Figure 4-21 Removing the cover assembly Cover assembly Base assembly Cable drain[...]

Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-37 Installing the cover assembly The following describes the procedure for inst alling the cover assembly (See Figure 4-19 to 4-21). 1. Install the cover assem bly to the base assembly. NOTE : Be careful not to catch the cables betw een cover assembly and base assembly. 2. Connec[...]

Replacement Procedures 4-38 Satellite P100 Main tenance Man ual (960-Q02) 4.13 Touch pad Removing the touch pad The following describes the procedure for removing the touch pad (See Figure 4-22). 1. Peel off the glass tape and disconnect the touch pad flat cable from the connector on the touch pad and peel the al foil. 2. Remove the following screw[...]

Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-39 Installing the touch pad The following describes the procedure for in stalling the touch pad (See F igure 4-22). 1. Peel off the separator covering on the sensor portion of a new touch pad. NOTE : Do not reuse the touch pad so that it can not be used after peeling off from the[...]

Replacement Procedures 4-40 Satellite P100 Main tenance Man ual (960-Q02) 4.14 Audio Board The following describes for removing the cover assembly (See Figure 4-23). Removing the audio board 1. Pull out the audio board cable from audio board connect CN4 2. Loose the below screws and then incline pull out audio board. z M2.5x4.0 FLAT BIND screw x1 F[...]

Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-41 4.15 Fingerprint The following describes for removing the cover assembly (See Figure 4-24). Remove the Fingerprint 1. Pull out the fingerprint cable from connect CN5 2. Loose below screws from fingerprint board and take it out top case z M2.5x4.0 FLAT BIND screw x2 Figure 4-24[...]

Replacement Procedures 4-42 Satellite P100 Main tenance Man ual (960-Q02) 4.16 USB Board The following describes for removing the cover assembly (See Figure 4-25). Removing USB board 1. Remove the USB cable from CN4 and USBCN1 2. Loose below screw from USB board z M2.5x4.0 FLAT BIND screw x1 Figure 4-25 Removing the USB board Installing the USB Boa[...]

Replacement Procedures Satellite P100 Maintenance Manu al (960-Q02) 4-43[...]

Replacement Procedures 4-44 Satellite P10 0 Main tenance Manual (960 -Q02) 4[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-45 4.17 System board CAUTION: 1. W hen handling the system board, alwa ys hold by the edges. Do not touch the printed circuit face. 2. If replacing with a new system board, execu te the subtest01 Initial configuration in section 3.3 “Setting of the hardware configuration”. A[...]

Replacement Procedures 4-46 Satellite P10 0 Main tenance Manual (960 -Q02) Installing the system board The following describes the procedure for inst alling the system board (See Figure 4-26). 1. Secure the system board with the following screws . • M2.5 × 4.0 BIND screw x3 2. Connect the speaker cable to the connector CN 10 on the system board.[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-47 4.18 CPU Removing the CPU heat sink The following describes the procedure for rem o ving the CPU heat sink (See Figure 4-27 ). 1. Disconnect the Heat sink cable from the connector CN20 on the system board 2. Remove the following screws securing the heat sink holder along 1 to[...]

Replacement Procedures 4-48 Satellite P10 0 Main tenance Manual (960 -Q02) 4. Unlock the CPU by rotating the cam on the CPU socket 120 degrees to the counterclockwise with a flat-blade screwdriver. 5. Remove the CPU . Figure 4-28 Removing the CPU Installing the CPU The following describes the procedure for in stalling the CPU (See Figure 4-27 to 4-[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-49 NOTE: Apply the silicon grease enough to cove r the chip surface using the special applicator. Figure 4-29 Applying silicon grease 5. Install the CPU heat sink and heat sink holder and secure them with the f ollowing screws along 1 to 5. M2.5 × 4.0 BIND screw x5 6. Connect t[...]

Replacement Procedures 4-50 Satellite P10 0 Main tenance Manual (960 -Q02) 4.19 VGA heat sink Removing the VGA heat sink The following describes the procedure for removing the VGA heat sink (See Figure 4-30). 1. Remove the following screws securing the VGA heat sink along 1 to 5. • M2.5 × 3.0 BIND screw x5 2. Pull up the VGA heat sink straight a[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-51 Installing the VGA heat sink The following describes the procedure for in stalling the VGA heat sink (See Figure 4-30). 1. Install the VGA heat sink . NOTE: For details on applying the silicon grease, refer to Installing the CPU. 2. Secure the VGA heat sink with the following[...]

Replacement Procedures 4-52 Satellite P10 0 Main tenance Manual (960 -Q02) 4.20 LCD unit / FL inverter CAUTION: When replacing a LCD, it is required th at SVP parameter is set. Update with the latest EC/KBC as described in Appendix H “EC/KBC Rewrite Procedures”. Removing the LCD unit / FL inverter The following describes the procedure for remov[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-53 4. Pull out one insulator and peel off the other one adhered to the FL inverter. 5. Disconnect the LCD harnesses from the connectors CN1 on the FL inverter. 6. Disconnect the HV harnesses from the connectors CN2 on the FL inverter. 7. Remove the FL inverter while peeling off [...]

Replacement Procedures 4-54 Satellite P10 0 Main tenance Manual (960 -Q02) 8. Remove the following screws securing the LCD unit. • M2.5x4.0 BINK HEAD screw x6 9. With the bottom edge of the LCD unit on the display cover, lift onl y the top edge of the LCD unit. After peeling off the CONDUTIVE tape , disconnect the LCD harness from the connector o[...]

Replacement Procedures Satellite P100 Main tenance Manu al (960-Q02) 4-55 11. Remove the following screws securing the LCD support (LCD unit side) and remove the LCD supports from the LCD unit. • M2.0x3.0 BINK screw x4 Figure 4-34 Removing the LCD supports M2.0x3.0 BINK LCD support M2.0x3.0 BINK LCD support LCD cable LCD logo Wireless Antenna Blu[...]

Replacement Procedures 4-56 Satellite P10 0 Main tenance Manual (960 -Q02) Installing the LCD unit/FL Inverter The following describes the procedure for inst alling the LCD unit and FL inverter (See Figure 4-31 to 4-34). 1. Install the LCD supports (LCD unit side) to the LCD and secure them with the following screws . • M2.0 × 3.0 BINK screw x4 [...]

Satellite P100 Maintenance Manu al(960-Q02) App-i Appendices[...]

App-ii Satellite P100 Ma intenance Manua l(960-Q02)[...]

QOSMIO G10 Maintenance Manual (960-497) App-iii Appendix Contents Appendix A Handling the LCD M odule .......................................................................... A-1 Appendix B Boar d Layout ............................................................................................... B-1 B.1 System Board ...........................[...]

App-iv Satellite P100 Maintenance Manua l(960-Q02) C.15 CN15 USB Port-1 .......................................................................................... 10 C.16 CN16 USB Port-2 .......................................................................................... 10 C.17 CN17/ CN20 Fan Connector .......................................[...]

QOSMIO G10 Maint e na nce Manual (960- 4 97 ) App-v E 9 French (FR) Keyboard ................................................................................. E-5 E 10 Hungary(HU) Keyboard ................................................................................ E-5 E 11 Italian (IT) Keyboard .................................................[...]

App-vi Satellite P100 Maintenance Manua l(960-Q02) Appendix F Wiring Diagrams ......................................................................................... F-1 F.1 RGB Monitor ID W raparound Connector .................................................... F-1 F.2 LAN Loopbak Connector ......................................................[...]

Satellite P100 Maintenance M anual ( 9 60- Q0 2 ) A-1 Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly. Observe the following precautions when handling the LCD module: 1. When installing the LCD module in the LCD cove r, be sure to seat it so t[...]

Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with co tton or a soft cloth. If it is still dirty, try breathing on the surface to create a light cond ensate and wipe it again. If the surface is very dirty, we recomme nd a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface. Do not apply clean[...]

Handling the LCD Module 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite L20 Main tenance Man[...]

Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause m alfunctions[...]

Handling the LCD Module 10. If you transport the module, do not use pack ing material that c ontains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. Satellite L20 Main tenance Manu al (960-Q01) A-5[...]

Handling the LCD Module A-6 Satellite P100 Maintenance M a nual( 960-Q0 2 )[...]

Satellite P100 Maintenanc e Manua l (960-Q02) B-1 Appendix B Appendix B Board Layout B.1 System Board Figure B-1 System board layout (front)[...]

Board Layout Figure B-2 System board layout (Back) B-2 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

Board Layout Table B-1-1 System board ICs and connectors Satellite L20 Main tenance Manu al(960-Q01) B-3[...]

Board Layout B.2 Function Button board <Front layout> <Back layout> Figure B-3 Function Button board layout Table B-2 Function Button board connectors B-4 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

Board Layout B.3 Modem board <Front layout> <Back layout> Figure B-3 Modem board layout Table B-3 Modem board connectors Satellite L20 Main tenance Manu al(960-Q01) B-5[...]

Board Layout B.4 Touch Pad Board <Front layout> <Back layout> Figure B-4 Touch pad board layout Table B-4 Touch pad board connectors B-6 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

Board Layout B.5 Audio Board <Front layout> <Back layout> Figure B-5 Audio board layout Satellite L20 Main tenance Manu al(960-Q01) B-7[...]

Board Layout Table B-5 Audio board connectors B-8 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

Board Layout B.6 VGA Board <Front layout> Figure B-6-4 VGA board layout (front) Satellite L20 Main tenance Manu al(960-Q01) B-9[...]

Board Layout <Back layout> Figure B-6-2 VGA board layout (back) Table B-6 VGA board connectors B-10 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

Board Layout B.7 Fingerprint Board <Front layout> <Back layout> Figure B-7 Fingerprint board layout Table B-7 Fingerprint board connectors Satellite L20 Main tenance Manu al(960-Q01) B-11[...]

Board Layout B.8 USB Board <Front layout> <Back layout> Figure B-8 USB board layout Table B-8 USB board connectors B-12 Satellite P100 Mainten ance Manual(96 0-Q02)[...]

Satellite L10 Maintenance Manu al(960-Q01) 1 Appendix C Pin Assignment CN1 Bluetooth Connector CONN SMD FFC 20P 1R FR (P0.5, H2.0) PIN No. Sig nal name I/O PIN No. Signal na me I/O 1 +3V --- 2 NC --- 3 WCS_DAT --- 4 USBP- I/O 5 USBP+ I/O 6 NC --- 7 WCS_CLK --- 8 NC --- 9 NC --- 10 GND --- 11 NC --- 12 NC --- 13 BT_RESET# I 14 NC --- 15 NC --- 16 NC[...]

Pin Assignm e nt 2 Satellite P100 Mainten ance Manual(960-Q0 2) 7 LVDS_TXL#2 I 8 LVDS_TXL2 I 9 GND --- 10 LVDS_TXL#1 I 11 LVDS_TXL1 I 12 GND --- 13 LVDS_TXL#0 I 14 LVDS_TXL0 I 15 GND --- 16 LVDS_TXLCK# I 17 LVDS_TXLCK I 18 GND --- 19 PNL_CLK I/O 20 PNL_DAT I/O 21 LVDS_TXU#2 I 22 LVDS_TXU2 I 23 GND --- 24 LVDS_TXU#1 I 25 LVDS_TXU1 I 26 GND --- 27 IN[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 3 PIN No. Signal name I/O PIN No. Signal name I/O 1 NBSWON# O 2 BT1# O 3 BT2# O 4 BT3# O 5 BT4# O 6 BT_IE# O 7 BT_WWW# O 8 CAPSLED I 9 NUMLED I 10 SCRLED I 11 EMAIL_LED I 12 NC --- 13 NC --- 14 NC --- 15 NC --- 16 NC --- 17 GND --- 18 GND --- 19 GND -- 20 GND --- CN4 USB Board Connector CON[...]

Pin Assignm e nt 4 Satellite P100 Mainten ance Manual(960-Q0 2) CN5 Finger Print Board Connector CONN SMD HOUSING 6P 1R FR (P1.25, H1.85) EP PIN No. Signal na me I/O PIN No. Signal na me I/O 1 +3VSUS --- 2 +3VSUS --- 3 BUSBP+ I/O 4 BUSBP- I/O 5 GND --- 6 GND --- CN6 Internal K/B Connector CONN SMD FPC 26P 1R FR (P1.0, H2.2) PIN No. Signal na me I/O[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 5 CN7 Touchpad Board Connector CONN SMD FFC 6P 1R FR (P1.0, H1.95) PIN No. Signal na me I/O PIN No. Signal na me I/O 1 +5V_TP --- 2 +5V_TP --- 3 TPDATA I/O 4 TPCLK I/O 5 GND --- 6 GND --- CN8 RTC Battery Connector CONN SMD HEADER 2P MS (P1.25) PIN No. Signal na me I/O PIN No. Signal na me I[...]

Pin Assignm e nt 6 Satellite P100 Mainten ance Manual(960-Q0 2) 11 A_CAD14 I/O 12 A_CC/BE1# O 13 A_CPAR I/O 14 A_CPERR# O 15 A_CGNT# I 16 A_CINT# O 17 A_VCC --- 18 AVPP --- 19 A_CCLK I 20 A_CIRDY# O 21 A_CC/BE2# O 22 A_CAD18 I/O 23 A_CAD20 I/O 24 A_CAD21 I/O 25 A_CAD22 I/O 26 A_CAD23 I/O 27 A_CAD24 I/O 28 A_CAD25 I/O 29 A_CAD26 I/O 30 A_CAD27 I/O 3[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 7 59 A_CSERR# I 60 A_CREQ# I 61 A_CC/BE3# O 62 A_CAUDIO I 63 A_CSTSCHG I 64 A_CAD28 I/O 65 A_CAD30 I/O 66 A_CAD31 I/O 67 A_CCD2# I/O 68 GND --- CN10 Speaker Connector CONN SMD HD 4P 1R MR (P1.25, H3.2) PIN No. Signal na me I/O PIN No. Signal na me I/O 1 INSPKR+ O 2 INSPKR- O 3 INSPKL+ O 4 I[...]

Pin Assignm e nt 8 Satellite P100 Mainten ance Manual(960-Q0 2) CONN DIP D-SUB 15P 2R FR (P0.76) L-F PIN No. Signal na me I/O PIN No. Signal name I/O 1 CRT_R I 2 CRT_G I 3 CRT_B I 4 NC --- 5 GND --- 6 GND --- 7 GND --- 8 GND --- 9 +5V_CRT --- 10 GND --- 11 CRT_SENSE# O 12 CRTDDAT I 13 CRTHSYNC I 14 CRTVSYNC I 15 CRTDCLK I 16 GND --- 17 GND --- CN13[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 9 17 DVI_TX0- I 18 DVI_TX0+ I 19 GND --- 20 NC --- 21 NC --- 22 GND --- 23 DVI_CLK+ I 24 DVI_CLK- I 25 GND --- 26 GND --- 27 NC --- 28 NC --- CN14 RJ11/RJ45 Connector CONN RJ11/RJ45 14P2R FR (L: G, R: Y, H10.1) LF PIN No. Signal name I/O PI N No. Signal na me I/O 1 +3V_S5 --- 2 LANACT_LED# [...]

Pin Assignm e nt 10 Satellite P100 Mainten ance Manual(960-Q0 2) PIN No. Signal name I/O PI N No. Signal name I/O 1 USBPOWER --- 2 USBP- I/O 3 USBP+ I/O 4 GND --- 5 GND --- 6 GND --- 7 GND --- 8 GND --- CN16 USB Port-2 CONN DIP (USB) 4P 1R MR (L=13.60, H5.70) PIN No. Signal name I/O PI N No. Signal name I/O 1 USBPOWER --- 2 USBP- I/O 3 USBP+ I/O 4 [...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 11 CONN SMD HEADER 2P 1R MR (P1.25, H1.95) PIN No. Signal na me I/O PIN No. Signal na me I/O 1 TIPL --- 2 RINGL --- CN19 HDD Connector CONN DIP HS 22P 1R FR (P1.27, H13.99) PIN No. Signal name I/O PI N No. Sig nal na me I/O 1 GND --- 2 SATA_TXP0 I 3 SATA_TXN0 I 4 GND --- 5 SATA_RXN0 O 6 SAT[...]

Pin Assignm e nt 12 Satellite P100 Mainten ance Manual(960-Q0 2) 1 GND --- 2 GND --- 3 VA --- 4 VA --- CN22 VGA Power Connector CONN SMD HEADER 10P MS (P1.5, H5.0) PIN No. Signal na me I/O PIN No. Signal na me I/O 1 GND --- 2 GND --- 3 GND --- 4 GND --- 5 GND --- 6 VIN --- 7 VIN --- 8 VIN --- 9 VIN --- 10 VIN --- CN23 DDR2 Connector IC SKT DDRII SO[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 13 15 GND --- 16 SM_DQ6 I/O 17 SM_DQ2 I/O 18 GND --- 19 SM_DQ3 I/O 20 SM_DQ13 I/O 21 GND --- 22 SM_DQ14 I/O 23 SM_DQ12 I/O 24 GND --- 25 SM_DQ8 I/O 26 SM_DM1 I 27 GND --- 28 GND --- 29 SM_DQS#1 I/O 30 SM_CLK0 I 31 SM_DQS1 I/O 32 SM_CLK#0 I 33 GND --- 34 GND --- 35 SM_DQ9 I/O 36 SM_DQ10 I/O [...]

Pin Assignm e nt 14 Satellite P100 Mainten ance Manual(960-Q0 2) 63 SM_DQ25 I/O 64 SM_DQ28 I/O 65 GND --- 66 GND --- 67 SMA_DM3 I 68 SM_DQS#3 I/O 69 NC --- 70 SM_DQS3 I/O 71 GND --- 72 GND --- 73 SM_DQ26 I/O 74 SM_DQ30 I/O 75 SM_DQ27 I/O 76 SM_DQ31 I/O 77 GND --- 78 GND --- 79 M_CKE0 I 80 M_CKE1 I 81 +1.8VSUS --- 82 +1.8VSUS --- 83 NC --- 84 NC ---[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 15 111 +1.8VSUS --- 112 +1.8VSUS --- 113 SM_CAS# I 114 M_ODT0 I 115 M_CS#1 I 116 SM_MA13 I/O 117 +1.8VSUS --- 118 +1.8VSUS --- 119 M_ODT1 I 120 NC --- 121 GND --- 122 GND --- 123 SM_DQ35 I/O 124 SM_DQ32 I/O 125 SM_DQ37 I/O 126 SM_DQ36 I/O 127 GND --- 128 GND --- 129 SM_DQS#4 I/O 130 SM_DM4 [...]

Pin Assignm e nt 16 Satellite P100 Mainten ance Manual(960-Q0 2) 159 SM_DQ49 I/O 160 SM_DQ53 I/O 161 GND --- 162 GND --- 163 NC --- 164 SM_CLK1 I 165 GND --- 166 SM_CLK#1 I 167 SM_DQS#6 I/O 168 GND --- 169 SM_DQS6 I/O 170 SM_DM6 I 171 GND --- 172 GND --- 173 SM_DQ50 I/O 174 SM_DQ54 I/O 175 SM_DQ51 I/O 176 SM_DQ55 I/O 177 GND --- 178 GND --- 179 SM_[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 17 IC SKT DDRII SO-DIMM (200P, H8.0MM, 1.8V) PIN No. Signal na me I/O PIN No. Signal nam e I/O 1 SM_VREF_DIMM --- 2 GND --- 3 GND --- 4 SM_DQ4 I/O 5 SM_DQ1 I/O 6 SM_DQ0 I/O 7 SM_DQ5 I/O 8 GND --- 9 GND --- 10 SM_DM0 I 11 SM_DQS#0 I/O 12 GND --- 13 SM_DQS0 I/O 14 SM_DQ7 I/O 15 GND --- 16 SM_[...]

Pin Assignm e nt 18 Satellite P100 Mainten ance Manual(960-Q0 2) 45 SM_DQ17 I/O 46 SM_DQ16 I/O 47 GND --- 48 GND --- 49 SM_DQS#2 I/O 50 PM_EXTTS#0 O 51 SM_DQS2 I/O 52 SM_DM2 I 53 GND --- 54 GND --- 55 SM_DQ23 I/O 56 SM_DQ18 I/O 57 SM_DQ19 I/O 58 SM_DQ22 I/O 59 GND --- 60 GND --- 61 SM_DQ24 I/O 62 SM_DQ29 I/O 63 SM_DQ25 I/O 64 SM_DQ28 I/O 65 GND ---[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 19 93 SM_MA8 I/O 94 SM_MA6 I/O 95 +1.8VSUS --- 96 +1.8VSUS --- 97 SM_MA5 I/O 98 SM_MA4 I/O 99 SM_MA3 I/O 100 SM_MA2 I/O 101 SM_MA1 I/O 102 SM_MA0 I/O 103 +1.8VSUS --- 104 +1.8VSUS --- 105 SM_MA10 I/O 106 SM_BS1 I 107 SM_BS0 I 108 SM_RAS# I 109 SM_WE# I 110 M_CS#0 I 111 +1.8VSUS --- 112 +1.8[...]

Pin Assignm e nt 20 Satellite P100 Mainten ance Manual(960-Q0 2) 141 SM_DQ40 I/O 142 SM_DQ45 I/O 143 SM_DQ41 I/O 144 GND --- 145 GND --- 146 SM_DQS#5 I/O 147 SM_DM5 I 148 SM_DQS5 I/O 149 GND --- 150 GND --- 151 SM_DQ42 I/O 152 SM_DQ43 I/O 153 SM_DQ46 I/O 154 SM_DQ47 I/O 155 GND --- 156 GND --- 157 SM_DQ48 I/O 158 SM_DQ52 I/O 159 SM_DQ49 I/O 160 SM_[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 21 189 SM_DQ62 I/O 190 GND --- 191 SM_DQ58 I/O 192 SM_DQ59 I/O 193 GND --- 194 SM_DQ63 I/O 195 CGDAT_SMB I/O 196 GND --- 197 CGCLK_SMB I/O 198 SA0 --- 199 +3V --- 200 SA1 --- CN25 1394 Port CONN DIP (1394) 4P 2R FR(P1.6,H5.6) L-F PIN No. Sig nal na me I/O PI N No. Signal name I/O 1 1394_TPB[...]

Pin Assignm e nt 22 Satellite P100 Mainten ance Manual(960-Q0 2) 9 PDD6 I/O 10 PDD10 I/O 11 PDD5 I/O 12 PDD11 I/O 13 PDD4 I/O 14 PDD12 I/O 15 PDD3 I/O 16 PDD13 I/O 17 PDD2 I/O 18 PDD14 I/O 19 PDD1 I/O 20 PDD15 I/O 21 PDD0 I/O 22 PDDREQ O 23 GND --- 24 PDIOR# I 25 PDIOW# I 26 GND --- 27 PIORDY O 28 PDDACK# I 29 IRQ14 O 30 NC --- 31 PDA1 I/O 32 PDIAG[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 23 CN27 VGA Interface Connector CONN SMD HS 180P FR (P0.5, H4.15) EP PIN No. Signal name I/O PI N No. Signal name I/O 1 PEG_TXP0 I/O 2 PEG_RXP0 I/O 3 PEG_TXN0 I/O 4 PEG_RXN0 I/O 5 GND --- 6 GND --- 7 PEG_TXP1 I/O 8 PEG_RXP1 I/O 9 PEG_TXN1 I/O 10 PEG_RXN1 I/O 11 GND --- 12 GND --- 13 PEG_TXP[...]

Pin Assignm e nt 24 Satellite P100 Mainten ance Manual(960-Q0 2) 43 PEG_TXP7 I/O 44 PEG_RXP7 I/O 45 PEG_TXN7 I/O 46 PEG_R XN7 I/O 47 GND --- 48 GND --- 49 PEG_TXP8 I/O 50 PEG_RXP8 I/O 51 PEG_TXN8 I/O 52 PEG_R XN8 I/O 53 GND --- 54 GND --- 55 PEG_TXP9 I/O 56 PEG_RXP9 I/O 57 PEG_TXN9 I/O 58 PEG_R XN9 I/O 59 GND --- 60 GND --- 61 PEG_TXP10 I/O 62 PEG_[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 25 91 PEG_TXP15 I/O 92 PEG_RXP15 I/O 93 PEG_TXN15 I/O 94 PEG_RXN15 I/O 95 GND --- 96 GND --- 97 27M_VGA I 98 PECLK_ VGA I 99 27MSS_VGA I 100 PECLK_VGA# I 101 GND --- 102 GND --- 103 GND --- 104 PLTRST# I 105 GND --- 106 SYSFANON# O 107 EXT_CRTDDCCLK I/O 108 MAINON I 109 EXT_CRTDDCDAT I/O 11[...]

Pin Assignm e nt 26 Satellite P100 Mainten ance Manual(960-Q0 2) 139 NC --- 140 +2.5V --- 141 EXT_TV_Y/G O 142 +2.5V --- 143 EXT_TV_C/R O 144 GND --- 145 GND --- 146 GND --- 147 EXT_DVI_TX2+ O 148 EXT_DVI_TX0+ O 149 EXT_DVI_TX2- O 150 EXT_DVI_TX0- O 151 GND --- 152 GND --- 153 EXT_DVI_CLK+ O 154 EXT_DVI_TX1+ O 155 EXT_DVI_CLK- O 156 EXT_DVI_TX1- O [...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 27 CN28 Modem Board Connector CONN SMD HEADER 12P, 2R, MS (P0.8, H2.4) PIN No. Signal name I/O PI N No. Signal name I/O 1 PWRCLKN I/O 2 GND --- 3 PWRCLKP I/O 4 GND --- 5 NC --- 6 GND --- 7 DIB_DATAP I/O 8 GND --- 9 DIB_DATAN I/O 10 GND --- 11 NC --- 12 GND --- 13 GND --- 14 GND --- 15 GND -[...]

Pin Assignm e nt 28 Satellite P100 Mainten ance Manual(960-Q0 2) 11 WAKW# --- 12 +NEW_3VAUX --- 13 PERST# O 14 +NEW_3V --- 15 +NEW_3V --- 16 NEW_CLKREQ# O 17 CPPE# O 18 PECLK_NEW# I 19 PECLK_NEW I 20 GND --- 21 PCIE_RXN O 22 PCIE_RXP O 23 GND --- 24 PCIE_TXN I 25 PCIE_TXP I 26 GND --- 27 GND --- 28 GND --- 29 GND --- 30 GND --- CN30 Mini Card Conne[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 29 19 NC --- 20 RF_EN I 21 GND --- 22 PLTRST# I 23 PCIE_RXN O 24 +3VSUS --- 25 PCIE_RXP O 26 GND --- 27 GND --- 28 +1.5V --- 29 GND --- 30 PCLK_SMB I/O 31 PCIE_TXN I 32 PDAT_SMB I/O 33 PCIE_TXP I 34 GND --- 35 GND --- 36 USBP- I/O 37 NC --- 38 USBP+ I/O 39 NC --- 40 GND --- 41 NC --- 42 LED[...]

Pin Assignm e nt 30 Satellite P100 Mainten ance Manual(960-Q0 2) 3 MSD1_SDD1_SMD1 I/O 4 MSD0_SDD0_SMD0 I/O 5 MSD2_SDD2_SMD2 I/O 6 MS_CD# O 7 MSD3_SDD3_SMD3 I/O 8 MSCK_SDCK_SM WP# I 9 VCC_FM --- 10 GND --- 11 MSD2_SDD2_SMD2 I/O 12 MSD3_SDD3_SMD3 I/O 13 MSBS_SDCMD_SMWE# O 14 GND --- 15 VCC_FM --- 16 MSCK_SDCK_SMWP# I 17 GND --- 18 NC --- 19 MSD0_SDD0[...]

Pin Assignment Satellite P100 Maintenance Manu al(960-Q02) 31 CONN SMD FFC 20P 1R FR (P0.5, H2.0) PIN No. Signal name I/O PI N No. Signal name I/O 1 SPKL O 2 SPKR O 3 PORT_B_L O 4 PORT_B_R O 5 MIC_R O 6 MIC_L O 7 SENSEA O 8 SENSEB O 9 AUD_VOL --- 10 GND --- 11 IRRX O 12 WLAN_LED O 13 Kill_LED O 14 LID591# O 15 WL_SW# O 16 SPKPLG O 17 SPDIF_OUT O 18[...]

Pin Assignm e nt 32 Satellite P100 Mainten ance Manual(960-Q0 2) 3 NC --- 4 TEMP_MBAT O 5 DATA I/O 6 CLK O 7 GND ---[...]

Satellite P100 Maintenance M anual ( 9 60- Q0 2 ) D-1 Appendix. D Appendix D Display Codes D.1 Display Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code s et 2 Cap No. Ke ytop Make Break Make Break Note 01 ‘ ~ 29 A9 0E F0 0E 02 1 ! 02 82 16 F0 16 03 2 @ 03 83 1E F0 1E 04 3 # 04 84 26 F0 26 05 4 $ 05 85 25 F0 25 06 5 % 06 86 2E F0[...]

Display codes D-2 Satellite P100 Maintenance Manual(960- Q 0 2 ) Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code s et 2 Cap No. Ke ytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Lock 3A BA 58 F0 58 31 A 1E 9E 1C F0 1C 32 S 1F 9F 1B F0 1B 33 D 20 A0 23 F0 23 34 F 21 A1 2B F0 2B 35 G 22 A2 34 F0 34 36 H 23 A3 33 F0 33 3[...]

Display codes Satellite L20 Main tenance Manu al (960-497) D-3 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L) 38 B8 11 F0 11 *3 61 Space 39 B9 29 F0 29 62 ALT (R) E0 38 E0 B8 E0 11 E0 F0 11 75 Ins E0 52 E0 D2 E0 70 E0 F0 70 *1 76 Del E0 53 E0 D3 E0 7[...]

Display codes D-4 Satellite P100 Maintenance Manual(960- Q 0 2 ) Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 58 D8 07 F0 07 *3 124 PrintSc *6 *6 *6 *6 *6 126 Pause *7 *7 *7 *7 *7 202 Fn — — — — *4 203 Win E0 5B E0 DB E0 1F E0 F0 1F 204 App E0[...]

Display codes Satellite L20 Main tenance Manu al (960-497) D-5 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Cap No. Key top Make Break Make Break 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 75 INS E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 76 DEL E0 AA E0 53 E0 D3 E0 2A E0 F0 12 E0 71 E0 F0 71 E0 12 79 ?[...]

Display codes D-6 Satellite P100 Maintenance Manual(960- Q 0 2 ) Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 76 DEL E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 79 ← E0 2A E0 4B E0 CB E0 AA E0 12 E0 6B E0 F0 6B E0 F0 12 80 Ho[...]

Display codes Satellite L20 Main tenance Manu al (960-497) D-7 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Cap No. Key top Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7D F0 7D 11 0 (*) 37 B7 7C F0 7C 23 U (4) 4B CB 6B F0 6B 24 I (5) 4C CC 73 F0 73 25 O (6) 4D CD 74 F0 74 26 P (–) 4A CA 7B F0 7B 37 J (1) 4F CF 69 F0[...]

Display codes D-8 Satellite P100 Maintenance Manual(960- Q 0 2 ) Table D-7 No.126 key scan code Code set 1 Code set 2 Key top Shift Make Make Pause Co m mo n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.[...]

Satellite P100 Maintenance M anual ( 9 60- Q0 2 ) E-1 Appendix E Key Layout Appendix E Keyboard Layout E.1 United States (US) Keyboard Figure E-1 US Keyboard layout E.2 United Kingdom (UK) Ke yboard Figure E-2 UK Keyboard layout[...]

Keyboard Layout E.3 Arabia (AR) Ke yboard Figure E-3 AR Keyboard layout E.4 Belgium (BB) Keyboard Figure E-4 BB Keyboard layout E-2 Satellite P100 Maintenance M a nual( 960-Q0 2 )[...]

Keyboard Layout Appendices E.5 Czech (CZ) Keyboard FigureE-5 CZ Keyboard layout E.6 German (GR) Keyboard Figure E-6 GR Keyboard layout Satellite Denver Maintenance Manual(P100) E-3[...]

Keyboard Layout E.7 Danish (DK) Ke yboard Figure E-7 DK Keyboard layout E.8 Spanis h (SP) Ke yboard Figure E-8 SP Keyboard layout E-4 Satellite P100 Maintenance M a nual( 960-Q0 2 )[...]

Keyboard Layout Appendices E.9 French (FR) Keyboard Figure E-9 FR Keyboard layout E.10 Hungar y(HU) Keyboard Figure E-10 HUR Keyboard layout Satellite Denver Maintenance Manual(P100) E-5[...]

Keyboard Layout E.11 Italian (IT) Keyboard Figure E-11 IT Keyboard layout E.12 Korean (KR) Keyboard Figure E-12 KR Keyboard layout E-6 Satellite P100 Maintenance M a nual( 960-Q0 2 )[...]

Keyboard Layout Appendices E.13 Norwegian (NO) Keyboard Figure E-13 NO Keyboard layout E.14 Portuguese (PT) Keyboard Figure E-14 PT Keyboard layout Satellite Denver Maintenance Manual(P100) E-7[...]

Keyboard Layout E.15 Traditional Chinese (TC) Keyboard Figure E-15 TC Keyboard layout E.16 Swedish (SW) Keyboard Figure E-16 SW Keyboard layout E-8 Satellite P100 Maintenance M a nual( 960-Q0 2 )[...]

Keyboard Layout Appendices E.17 Russian (RU) Keyboard Figure E-17 RU Keyboard layout E.18 Turkish (TR) Keyboard Figure E-18 TR Keyboard layout Satellite Denver Maintenance Manual(P100) E-9[...]

Keyboard Layout E.19 Japanese (JP) Keyboard Figure E-19 JP Keyboard layout E.20 Swiss-German(SL) Keyboard Figure E-20 SL Keyboard layout E-10 Satellite P100 Maintenance M a nual( 960-Q0 2 )[...]

Keyboard Layout Appendices E.21 Hebrew Keyboard Figure E-21 Keyboard layout E.22 Greek Keyboard Figure E-22 GK Keyboard layout Satellite Denver Maintenance Manual(P100) E-11[...]

Satellite P100 Maintenance M anual ( 9 60- Q0 2 ) F-1 Appendix F Appendix F Wiring Diagrams F.1 RGB Monitor ID Wraparound connector (1) RED (2) GREEN (3) BLUE (4) NC (5) GND (6) GND (7) GND (8) GND (9) 5V (10) GND (1 1) NC (12) SD A (13) HSYNC (14) VSYNC (15) SDL RED (1) GREEN (2 ) BLUE (3) NC (4) GND (5) GND (6) GND (7) GND (8) 5V (9) GND (10) NC [...]

Wiring Diagrams F-2 Satellite P100 Maintenance M a nual( 960-Q0 2 )[...]

Satellite P100 Maintenan ce Manual(960-Q02) G-1 Appendix G Appendix G BIOS Rewrite Procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool:  BIOS/EC/KBC rewriting disk  USB doggle Rewriting the BIOS 1. Set the system to boot mode. 2. Turn [...]

Satellite P100 Maintenan ce Manual(960-Q02) H-1 Appendix H Appendix H EC/KBC Rewrite Procedures Same as BIOS rewrite Procedures, please refer appendix G[...]

Satellite P100 Maintenance Manu al(96 0-Q02) I-1 Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures ) in maximum configuration. Table I-1 MTBF Component Time (hours) System 6678.69[...]

Reliability I-2 Satellite L10 Maintenance Manual(960-Q0 1)[...]