Toshiba T210/ T210D/ T230/ T230D инструкция обслуживания

User ’ s Manual Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series[...]

User ’s Manual ii T able of Content s Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v T rademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

User ’s Manual iii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Underside . . . . . . . . . . . . . . . . .[...]

User ’s Manual iv Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Chapter 7 HW Setup Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 HW Setup window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Chapter 8 T roubleshooting Problem solving proce[...]

User ’s Manual v Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Copyright © 2010 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liability is assumed, with respect to the use of the information contain[...]

User ’s Manual vi Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Memory S tick, Memory S tick Duo, Me mory S tick PRO, Memory S tick PRO Duo and Memory S tick Micro are trade marks or registered trademarks of Sony Corporation. ConfigFree is a trademark of T oshiba Corporation. T ouchPad is a trademark of Synaptics, Inc. Wi-Fi is [...]

User ’s Manual vii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series 1. This device may not cause harmful interfere nce. 2. This device must accept any interference received, including interference that may cause undesired opera tion. Cont act Address: TOSHIBA America Information Systems, Inc. 9740 Irvine Bouleva rd Irvine, Californ[...]

User ’s Manual viii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series For example, the fol lowing environments are not a pproved: ■ Industrial Environments (e.g. environmen ts where a mains voltage of 380 V three-phase is used) ■ Medical Enviro nments ■ Automotive Environments ■ Aircraft Environments Any consequences resulti[...]

User ’s Manual ix Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Following information is only valid for EU-mem ber S t ates: Disposal of product s Disposal of batteries a nd/or accumulators Disposing of the computer and the computer's batteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations.[...]

User ’s Manual x Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series REACH - Compliance St atement The new European Union (EU) chemical regulation, REACH (R egistration, Evaluation, Authorization and Restriction of Chemica ls), entered into force on 1 June 2007. TOSHIBA will meet all REACH requirements and is committed to provide our [...]

User ’s Manual xi Preface Congratulations on your purchase of the Satellite/Sa tellite Pro/PORTÉGÉ T210/T210D/T230/T 230D Series computer . This powerful noteboo k computer provides excellent expans ion capability , includes mul timedia functionality , and is designed to prov ide years of reliable, hi gh-performance computing. This manual tel l[...]

User ’s Manual xii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Icons Icons identify ports, dials, and other parts of your computer . The indicator pane l also uses icon s to identify the comp onents it is providing in formation on. Keys The keyboard keys are used in th e te xt to describe many computer operations. A distincti [...]

User ’s Manual xiii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series T erminology This term is defined in this document as follows: Star t The word " Sta rt " refers to the " " button in Windows 7. HDD or Hard disk drive Some models are equipped with a "Soli d S t ate Drive (SSD)" instead of a hard dis[...]

User ’s Manual xiv General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho we ver , cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer . Be certain to read the general precau tions below and to note the cautio[...]

User ’s Manual xv Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Creating a computer-friendly environm ent Place the computer on a flat surface that is large enough for the computer and any ot her items yo u are usin g, such as a printer . Leave enough space around the comput er and o ther equipment to provide adequate venti lati[...]

User ’s Manual xvi Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Pressure or imp act damage Do not apply heavy pressure to the com puter or subject it to any form of strong impact as this can damage the computer's compone nts or otherwise cause it to malfuncti on. Mobile phones Please be aware that the use of mob ile phones[...]

User ’s Manual 1-1 Chapter 1 Getting S t arted This chapter provides an equ ipment checklist, and basic informa tion to start using your computer . Equipment checklist Carefully unpack your comp uter , taking care to save the box and packaging materials for future use. Hardware Check to make sure you have al l the following items: ■ Satellite/S[...]

User ’s Manual 1-2 Getting S tarted Sof tware The following Wi ndows ® operating system and ut ility sof tware are preinstalled. ■ Windows ® 7 ■ TOSHIBA V alue Added Package ■ TOSHIBA Recovery Media Creato r ■ TOSHIBA Assist ■ TOSHIBA ConfigFree™ ■ TOSHIBA HDD Protection ■ TOSHIBA Disc Creator ■ TOSHIBA Face Recognition (Is pr[...]

User ’s Manual 1-3 Getting S tarted Getting St arted This section provides basic information to start using your computer . It covers the following topics: ■ Connecting the AC adaptor ■ Opening the display ■ T urning on the power ■ S t arting up for the first time ■ T urning off the power ■ Resta rting the comput er ■ System Recover[...]

User ’s Manual 1-4 Getting S tarted Connecting the A C adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power . The AC adaptor can be connected to any po wer sour[...]

User ’s Manual 1-5 Getting S tarted 1. Connect the power cord to the AC adaptor . Figure 1-1 Connecting the power cord to the AC adap tor (2-pin plug) Figure 1-2 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor ’s DC output plug to the DC IN 19V jack on the left side of the computer . Figure 1-3 Connecting the[...]

User ’s Manual 1-6 Getting S tarted Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main b ody of the computer is not raised, slowly lift the display panel - this will allow the angle of the d isplay panel to be adjusted to provide opti [...]

User ’s Manual 1-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Powe r-Up Modes fo r more information. 1. Open the display panel. 2. Press and hold the computer's pow[...]

User ’s Manual 1-8 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Down Mode, no data will be saved and the computer will boot to the opera ting system's main screen the next time it is turned o[...]

User ’s Manual 1-9 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the S[...]

User ’s Manual 1-10 Getting S tarted When you turn the power back on, you can continue where you left when you shut down the computer . Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down. ■ Memory circuits are exposed to st atic electricity or electrica[...]

User ’s Manual 1-1 1 Getting S tarted S tarting Hibernation Mode T o enter Hibernation Mode, follow the steps below . 1. Click Start . 2. Point to the arro w icon ( ) and then select Hibernate from the menu. Automatic Hibernation Mode The computer can be configured to ent er Hibernation Mode auto matically when you press the power button or clos [...]

User ’s Manual 1-12 Getting S tarted ■ Press the power button and hold it do wn for five seconds. Once the computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button. System Recovery Opti ons There is a hidden partition allocated on the hard disk drive for the System Recov[...]

User ’s Manual 1-13 Getting S tarted System Recovery This section describes the creation of Recovery Media an d their use. Creating Recovery Media This section describes how to crea te Recovery Media. A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to eit her DVD or USB Flash Memory by using [...]

User ’s Manual 1-14 Getting S tarted 5. After Recovery Media Creator starts , select the type of media and the title you wish to copy , and then click the Create button. Restoring the pre installe d sof tware from th e Recovery hard d isk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition. This p arti[...]

User ’s Manual 1-15 Getting S tarted Restoring the prein sta lled sof tware from yo ur created Recovery Media If the prein stalled files are damaged , you are able to either use the Recovery Media you have created or the hard disk drive recovery process to restore the computer to the state it was in when you originally received it. T o perform th[...]

User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the various co mponen ts of the computer - it is recommended that you beco me famili ar with each before you operate the computer . Front with the display closed The following fig ure shows the computer ’ s front with its display panel in th e closed position. Figure 2-1 Front[...]

User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter ’s left side. Figure 2-2 The left side of the computer (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) 1. DC IN 19V jack 4. eSA T A/USB combo por t 2. Cooling vents 5. Bridge media slot 3. HDMI port 1 2 3 4 5 DC IN 19V jack The AC adaptor connects to this jac[...]

User ’s Manual 2-3 The Grand T our Right side The following figure shows the comp uter ’s right side. Figure 2-3 The right side of the computer (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Keep foreign metal objects, such as scr ews, staples and paper clips, out of the eSA T A/U SB combo port. Foreign metal objects can create a short circuit[...]

User ’s Manual 2-4 The Grand T our Back The following figure shows the computer ’s back. Figure 2-4 The back of the computer (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) Microphone j ack A 3.5 mm mini microphone jack enable s connection of a three-conductor mini jack for monaural microphone input. Universal Se rial Bus (USB 2.0) ports T wo Un[...]

User ’s Manual 2-5 The Grand T our Underside The following figure shows the undersi de of the computer . Y ou shou ld ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage. Figure 2-5 The underside of the computer (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Figure 2-6 The underside of the computer [...]

User ’s Manual 2-6 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lif t the display panel up and position it at a comfortable viewing angle for you. Figure 2-7 The front of the computer with th e display panel open (Satellite/Satellite Pr o/PORTÉGÉ T210/T2[...]

User ’s Manual 2-7 The Grand T our Figure 2-8 The front of the computer with th e display panel open (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) * Provided with some models. Product appearance depends on the model you purchased. 1. Wireless LAN and Wireless W AN antennas (not shown)* 7. Power button 2. Web Camera 8. LCD Sensor switch (not sho[...]

User ’s Manual 2-8 The Grand T our Web Camera Web Camera is a device that allows you to record video or take photographs with you r computer . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messenge r . TOSHIBA Web Camera Application will help you to add various video effects to your video [...]

User ’s Manual 2-9 The Grand T our Indicators This section explains ind icator functions. System indica tors LED system indicators next to their resp ective icons, glow when specific computer operations are in progress. Figure 2-9 System indicators Do not put any magnetic objects close to th is switch as they may cause the computer to automati ca[...]

User ’s Manual 2-10 The Grand T our DC IN The DC IN indicator normally glows white when power is being correctly supplied from the AC power adaptor . However , If the outpu t voltage from the adaptor is abnorm al, or if the computer' s power supply malfunctions, this indi cator will flash amber . Power The Power indicator norma lly glows whi[...]

User ’s Manual 2-1 1 The Grand T our Keyboard indicators The following figures show the position of the C APS LOCK indicator which show the following conditi ons: ■ When the CAPS LOCK indica tor glows, the keyb oard will produce capitals when any letter is typed. Figure 2-10 CAPS LOCK indicator (Satel lite/Sat ellite Pro/PORTÉGÉ T210/T210D) F[...]

User ’s Manual 2-12 The Grand T our AC adaptor The AC adaptor can automa tically adjust to any voltage ranging from 100 to 240 volts and to a freque ncy of either 50 o r 60 hertz, enablin g you to use this computer in almost all country/ region. The adaptor converts AC power to DC power and re duces the voltage supplied to this computer . T o rec[...]

User ’s Manual 3-1 Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer . The actual specifications ma y vary depending on the model you purchased. Processor CPU Y our co mputer is equipped with one processor and processor type varies depending on model. T o check which type of processor is inclu[...]

User ’s Manual 3-2 Hardware, Utilities and Options Memory Power Memory slots 1 GB, 2 GB or 4 GB memory modules can be installed in the computer's two memory slots for a maximum of 8 GB system memory . This computer can be equipped with memory modules of a maximum size of 8 GB. The actual amount of useable system memory will be less than the [...]

User ’s Manual 3-3 Hardware, Utilities and Options Disks Legal Footnote (Battery Life) For more information regarding Batter y Life, please refer to the Legal Footnotes section in Appendix G . RTC battery The internal RTC battery backs up the Real T ime Clock (RTC) and calendar . AC adaptor The AC adaptor provides power to the system and recharge[...]

User ’s Manual 3-4 Hardware, Utilities and Options Display The computer's internal disp lay panel supports high-resolution video graphics and can be se t to a wide ran ge of viewing angl es for maximum comfort and readability . Display Power Saving T echnolo gy Y our model may include the Displ ay Po wer Saving T echnology feature that can s[...]

User ’s Manual 3-5 Hardware, Utilities and Options 2. Select On battery from the drop-down menu in Graphics Power Plan Settings and then select the Display Power Saving T echnolog y check box. If you want to improve the picture quality under the conditions mentioned above, adjust the setting towards Maximum Qual ity or disable this feature. *Plea[...]

User ’s Manual 3-6 Hardware, Utilities and Options Sound Multimedia Communications Legal Footnote (LCD) For more information regarding the LCD, please refer to the Legal Footnotes section in Appendix G . Graphics controlle r The graphics controller maximizes display performance. Refer to Display Controller and Video mode section in Appendix B for[...]

User ’s Manual 3-7 Hardware, Utilities and Options Wireless LAN Some computers in this series are equipped wi th a Wireless LAN module that is compatible with other wireless LAN systems based on Direct Sequence S pread S pectrum/Orthogonal Frequency Division Multiplexing ra dio technology that complies with the IEEE 802.1 1 S tandard. Legal Footn[...]

User ’s Manual 3-8 Hardware, Utilities and Options Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures. *1 T o access the Power Options, click St ar t -> Control Panel -> System and Se[...]

User ’s Manual 3-9 Hardware, Utilities and Options Battery save mode *1 This feature lets you configure the compute r in order to save battery power . This can be specified in the Power Options. Panel power on/o ff *1 This feature automatica lly turns power to the computer of f when the displ ay pane l is closed, and turns it back on when the dis[...]

User ’s Manual 3-10 Hardware, Utilities and Options Hibernation Mod e This feature lets you tu rn off the power to the computer without e xiting fro m your software. The contents of main memory are automatically saved to the hard disk drive so that when you next turn the power o n again, you can continue working right where you left off. Refer to[...]

User ’s Manual 3-1 1 Hardware, Utilities and Options Utilities and Applications This section describes the preinstalled utilities that come with the co mputer and details how to start them. For further info rmation on their operation, you may refer to each utility's online manual, help files or README.TXT file (if applicable). Y ou may not h[...]

User ’s Manual 3-12 Hardware, Utilities and Options TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to ve rify the face da ta of users when they log in to Win dows. If the verification is successful, the user will be logged into Windows automatica lly . The user can thus avoid having to enter a password or the l[...]

User ’s Manual 3-13 Hardware, Utilities and Options TOSHIBA Disc Creator Y o u can create CDs and DVDs in a number of formats including audio CDs that can be played on a standard CD player , and da ta CDs/DVDs which can store copie s of the files and fo lders on your computer's hard disk drive. This software can be used on models conne cted [...]

User ’s Manual 3-14 Hardware, Utilities and Options Optional devices Optional devices can expand the computer's capabilities and its versatility . This section describes the connection or installation of the following devices: Cards/memory ■ Bridge medi a slot ■ Secure Digital™ (SD) Card (SD me mory card, SDHC memory card, SDXC memory [...]

User ’s Manual 3-15 Hardware, Utilities and Options Peripheral devices ■ External monitor ■ eSA T A device Other ■ Security lock Bridge med ia slot The computer is equipped with a Bri dge media sl ot that can accommodate some kinds of memory media with vari ous memory cap acities so that you can easily transfer data from devices, such as di[...]

User ’s Manual 3-16 Hardware, Utilities and Options Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC/SDXC memory card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or play[...]

User ’s Manual 3-17 Hardware, Utilities and Options Media care Observe the following preca utions when handling the card. Card care ■ Do not twist or be nd cards. ■ Do not expose cards to liquids or store in humi d areas or lay media close to containers of liquid. ■ Do not touch the metal part of a card or expose it to liquids or l et it ge[...]

User ’s Manual 3-18 Hardware, Utilities and Options 3. Press the memory media gently to ensure a firm connection is made . Figure 3-2 Inserting a memory media (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Remo vin g a me mor y med ia The following instru ctions apply to all types of supported media device s. T o remove a memory media, follow th[...]

User ’s Manual 3-19 Hardware, Utilities and Options 4. Grasp the media and remove it. Figure 3-3 Removing a memory media (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Additional mem ory modu le Y ou can install additional memory into th e computer in order to increase the amount of system memory that is avai lable. This section describes how to[...]

User ’s Manual 3-20 Hardware, Utilities and Options Installing a memory module T o install a memory module, follow the steps as detailed below: 1. Shut down the compu ter - make su re the Power indicator is off (refer to the T urning off the pow er section in Chapter 1, Getting S tarted if required). 2. Remove the AC ad aptor and all cable s and [...]

User ’s Manual 3-21 Hardware, Utilities and Options Figure 3-5 Removing the memory module cover (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) 7. Align the notch of the memory modul e with that of the memory slo t and gently insert the module in to the slot at about a 45 d egree angle before holding it down until the latches on either side snap [...]

User ’s Manual 3-22 Hardware, Utilities and Options Figure 3-7 Seating the memory module (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) 8. Seat the memory module cover in place and secure it with the screw. 1. Notch 3. Slot B 2. Slot A 1 2 2 3 1 ■ Never allow metal objects, such as screws, staples and p aper clips, to enter the computer. Forei[...]

User ’s Manual 3-23 Hardware, Utilities and Options Figure 3-8 Seating the memory module cover (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Figure 3-9 Seating the memory module cover (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) 9. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Powe r-Up Modes[...]

User ’s Manual 3-24 Hardware, Utilities and Options 6. Slide your fingernail or a thin object under the cover and lift it off. 7. Push the latches away from the module in order to release it - a spring will force one end of the modul e up at an angle. 8. Grasp the module by its edges and remove it from the computer . Figure 3-10 Removing the memo[...]

User ’s Manual 3-25 Hardware, Utilities and Options 9. Seat the memory module cover in place and secure it with the screw . 10. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Powe r-Up Modes, if required. 1 1. T urn your computer over . External monitor An external analog monitor can be connected t[...]

User ’s Manual 3-26 Hardware, Utilities and Options At that time, please read the manual of the monitor and set the display mode which is supporting at the monitor . Then it will be displayed with suitable size with co rrect aspect ratio. eSA T A (External Serial A T A) A device corresponding to eSA T A function can be connected to the eSA T A/US[...]

User ’s Manual 3-27 Hardware, Utilities and Options Disconnecting an eSA T A device When you have finished using an eSA T A de vice, you can follow the procedures below in order to disconnect it: 1. W ait for th e indicator lig ht of an eSA T A device to go out to make sure all activity has stopped. 2. Click the Safely Remove Hardwa re and Eject [...]

User ’s Manual 3-28 Hardware, Utilities and Options Settings for disp lay video on HDMI T o view video on the HDMI device, be sure to configure th e following settings otherwise you may find that nothing is displayed. Select HD Format T o select the display mode, follow the steps as detailed below: 1. Click Start and click Control Panel . 2. Clic[...]

User ’s Manual 3-29 Hardware, Utilities and Options Security lock A security locks enable you to ancho r your computer a desk or other heavy object in order to help prevent unautho rized removal or theft. The computer has a security lock slot on its right side into which you can attach one end of the security cable, while the other end attaches t[...]

User ’s Manual 3-30 Hardware, Utilities and Options Optional accessories Y ou are able to add a number of options and accessories in orde r to make your computer even more powerful and convenient to use . For reference, the following list details some of the items that are avai labl e from your reseller or TOSHIBA dealer: DDR3-1066/1333 Memory Ki[...]

User ’s Manual 4-1 Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go. Figure 4-1 T ouch Pad and T o[...]

User ’s Manual 4-2 Operating Basics T ouch Pad Gesture Please refer to the touch pad settings in mouse properties. We b Ca me r a Web Camera is a device that allows you to record video or take photographs with your compute r . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger . T OSH[...]

User ’s Manual 4-3 Operating Basics Using the T OSHIBA Face Recognition TOSHIBA Face Recognition uses a face verificati on library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier . Disclaimer TOSHIBA does not guarantee that the fa ce[...]

User ’s Manual 4-4 Operating Basics TOSHIBA, ITS AFFILIA TES A ND SUPPLIERS SHALL HA VE NO RESPONSIBILITY FOR DAMAGE T O OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DA T A, NE TWORK SYSTEMS OR REMOV ABLE STORAGE MEDIA ARISING OUT OF OR RESUL TING FROM THE USE OF THE PRODUCT , EVEN IF AD VISED OF THE POSSIBILITY THEREOF . How to register the Face [...]

User ’s Manual 4-5 Operating Basics 8. If verification is successful, click the Next button and register an account. 9. Register the account. Fill in all the fields. 10. The Managemen t screen is displayed. The registered account name wi ll be displayed. Clicking on it wi ll cause the captured image of your face to be displayed on the left. How t[...]

User ’s Manual 4-6 Operating Basics 5. V erification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another . ■ If an error occurs during authentication, you will be returned to the Select Tiles screen. 6. The Windows Welcome screen will be displayed, and will be logge[...]

User ’s Manual 4-7 Operating Basics ■ Y ou ca nnot back up CD-ROM, CD-R or CD-RW media to DVD+R, DVD+R (Double Layer) or DVD+RW media using the "Disc Backup" function of T OSHIBA Disc Creator . ■ Y ou ca nnot back up DVD-ROM, DVD Video, DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer) or DVD+RW to CD- R or CD-RW media[...]

User ’s Manual 4-8 Operating Basics How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. Sound System This section describes some of the audio control functions. Adjusting System V olume Y ou can control the o verall level of sound using Windows Volume Mixer . T o launch V o [...]

User ’s Manual 4-9 Operating Basics Audio Enhancement s In order to apply the soun d effects for your current speaker , follow the steps below . 1. Right click on the speaker icon on the T askbar , and select Playb ack devices from the su b menu. 2. Select Speakers , and click Properties . 3. On the Enhancement s tab select the sound effects you [...]

User ’s Manual 4-10 Operating Basics Microphone Ef fects Microphone Effect s are only found within Micropho ne window . ■ Noise Suppression reduces background noise and fa n noise. ■ Acoustic Echo Cancellation reduces feedback and feedback echo. Default Format Y ou can change the sample rate and bit depth of sound. Notes on Using Microphon e [...]

User ’s Manual 4-1 1 Operating Basics Wireless com munications The computer ’s wireless communication function supports some wireless communication devi ces. Only some models are equipped wit h both Wireless LAN and Bluetooth functions. Wireless LAN The Wireless LAN is compatible wit h other LAN systems based on Direct Sequence S pread S p ectr[...]

User ’s Manual 4-12 Operating Basics Setting 1. Please make sure that the Wireless Communi cation function is on. 2. Click Start -> Control Panel -> Netw ork and Internet -> Network and Sharing Center . 3. Click Set up a new connecti on or network . 4. Follow the wizard. Y ou will need the name of the wireless n etwork together with secu[...]

User ’s Manual 4-13 Operating Basics Security T wo advanced security mechanisms ensure a high le vel of security: ■ Authentication prevents access to critical data and makes it impossible to falsify the origin of a message. ■ Encryption prevents eavesdropping and maintains link privacy . Bluetooth Stack fo r Windows by TOSHIBA Please note tha[...]

User ’s Manual 4-14 Operating Basics Wireless communica tion Indicator The wireless communication indicator shows the status of the computer's wireless com munication fu nctions. If you used the T askbar to disable the wireless LAN, restar t the comp uter or perform the following procedure to re-enab le it: Star t -> Control Panel -> S[...]

User ’s Manual 4-15 Operating Basics Connecting the LAN cable T o connect the LAN cable, foll ow the steps as detailed below: 1. T urn off the power to the computer and to all external devices connected to the computer . 2. Plug one end of the cable into t he LAN jack. Press gently until yo u hear the latch click into place. Figure 4-1 Connecting[...]

User ’s Manual 4-16 Operating Basics Computer Ha ndling This section explains computer han dling and maintenance. Cleaning the compu ter T o help ensure long, trouble-free o per ation, keep the computer free of dust and dirt, and u se care with a ll liquids arou nd it. ■ Be careful not to spill liquids into the comp uter . If th e computer does[...]

User ’s Manual 4-17 Operating Basics ■ Never transport your computer with any cards in stalled - this may cause damage to either the computer and/o r the card resulting in prod uct failure. ■ Always use a suitable carry case when transporting th e computer . ■ When carrying your computer , be sure to hold it securely so tha t it does not fa[...]

User ’s Manual 4-18 Operating Basics TOSHIBA HDD Protection Properties Y ou can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection Properties window . T o open the window , click Star t -> All Programs -> TOS HI BA -> Utilities -> HDD Protection Settings . The window can also be started from the icon on the[...]

User ’s Manual 4-19 Operating Basics Det ails T o open the Details window , click the Setup Det ail button in the TOSHIBA HDD Protection Properties window . Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Dete ction assumes that the computer will be carried and sets the detection level to the maximum fo[...]

User ’s Manual 4-20 Operating Basics St arting the Sleep Utility T o start the utility , click Start -> All Programs -> TO S HIB A -> Utilities -> Sleep Utility . Enabling Sleep and Charge This utility can be used to enable and disab le the USB Sleep and Charge function. Select the Enable Sleep and Ch arge check box to enable this fun[...]

User ’s Manual 4-21 Operating Basics Power supply mod e settings Y our PC has multiple charging modes so th at many different USB devi ces can be supported for USB Sleep and Charge function. T ypical Mode (Default) is suitable for a wide range of digital audio players. However , determining which mode is suitable for your USB device is unknown wi[...]

User ’s Manual 5-1 Chapter 5 The Keyboard The computer ’s keyboard layouts ar e compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer . The number of keys available on your keyboard will depend on which country/region your comp[...]

User ’s Manual 5-2 The Keyboard Function keys: F1 … F12 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys. F1 through F12 are called functi on keys because they execute programmed functions when pressed and, when used in combination [...]

User ’s Manual 5-3 The Keyboard The FN key can be combi ned with the following keys to simulate functions similar to those of keys on the 104/105 key enhanced keyb oard which are not on this computer's keyboard. Press FN + F10 or FN + F1 1 to access the computer's integrated keypad. When activated, the keys with grey ma rkings on their [...]

User ’s Manual 5-4 The Keyboard Sleep : Pressing FN + F3 switches the system to Sleep Mode. Hibernate : Pressing FN + F4 switches the system to Hibernation Mode. Output : Pressing FN + F5 changes the active display devi ce. Brightness Down : Pressing FN + F6 decreases the computer's display panel brightness in individual steps. Brightness Up[...]

User ’s Manual 5-5 The Keyboard TOSHIBA Zooming Utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows. TOSHIBA Zooming Utility (enlarge): Pressing FN + 2 enlarges the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows. V [...]

User ’s Manual 5-6 The Keyboard Keyp ad overlay Y our computer's keybo ard may not have a separa te numeric keyp ad but includes a numeric keypad overlay which functions like one - this is located in the center of the keyb oard with the relevant keys havi ng grey letters at their front edge. The overlay provides the same functions as the num[...]

User ’s Manual 5-7 The Keyboard Figure 5-3 The numeric keypad overlay (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) T emporarily using normal keyboard (overlay on) While using the overlay , you can te mporarily access the normal keyboard functions without having to turn the overlay off: 1. Hold down FN key and press any other key - this key wil[...]

User ’s Manual 5-8 The Keyboard Generating ASCII charact ers Not all ASCII characters can be generated using norma l keyboard operation, but you are a ble to generate the se characters using their specific ASCII codes. 1. Hold down AL T with the overl ay on or AL T + FN with overlay off. 2. Using the overlay keys, type the ASCII code of the chara[...]

User ’s Manual 6-1 Chapter 6 Power and Power-Up Modes The computer's p ower resources in clude the AC ad aptor , battery pack and any internal batteries. This chapter provides details on making the most effective use of the se resources , and includ es informati on on charging and changing batteri es, tips for saving ba ttery power , and inf[...]

User ’s Manual 6-2 Power and Power-Up Modes T able 6-1 Power conditions continued Monitoring of power condition As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the [...]

User ’s Manual 6-3 Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be noted: Power i ndica tor Check the Power indicator to determine the pow er status of the computer - the following indicator conditions shou ld be noted[...]

User ’s Manual 6-4 Power and Power-Up Modes Real Time Clock (RTC) battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off. If the R TC battery becomes completely discharged, th e system will lose this in formation[...]

User ’s Manual 6-5 Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low , the Battery indicator will flash amber to indicate that only a fe w minutes of battery power remain. If you continue to u se the computer w hile the Ba ttery indicator flashes, the computer will enable Hibernation Mode so that you d[...]

User ’s Manual 6-6 Power and Power-Up Modes Tim e The following table shows the approximate time required to fully charge a discharged battery . Charging ti me (hours) Battery charging notice The battery may not begin charging immediately under the followin g conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, i[...]

User ’s Manual 6-7 Power and Power-Up Modes Monitoring battery ca p acity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the T askbar ■ Via the Battery S tatus in the Windows Mobi lity Center window Maximizing battery op erating time A battery's usefulness depends on how long it can s[...]

User ’s Manual 6-8 Power and Power-Up Modes Ret aining dat a with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Retention time Extending battery life T o maximize the life of your battery p acks: ■ At least once a mo nth, disconnect the computer from[...]

User ’s Manual 6-9 Power and Power-Up Modes This section explains how to remove and install the battery pack, and begins with the removal process which is detailed through the following steps. Removing the battery pa ck T o remove a discharged battery , follow the steps as detailed below: 1. Save your work. 2. T urn the computer's power off [...]

User ’s Manual 6-10 Power and Power-Up Modes Figure 6-2 Releasing the battery pack (Satellite/Satellite Pro/PORTÉGÉ T230/T230D) Installing the battery pack T o insta ll a battery p ack, follow the steps as det ailed belo w: 1. Insert the battery pack as far as it will go into the computer . 2. Ensure tha t the battery pack is securely in place [...]

User ’s Manual 6-1 1 Power and Power-Up Modes Figure 6-4 Securing the battery pack (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) 3. T urn your co mputer over . Password Utility The password utility allows you to mainta in an addi tional level of security and provides two levels of password security: User and Supervisor . User Password T o start[...]

User ’s Manual 6-12 Power and Power-Up Modes Click Star t -> All Programs -> TO SH IB A -> Utilities -> TOSHIBA Assist -> SECURE -> Supervisor password This utility lets you do the following: ■ Register or delete the supervisor password. ■ S pecify restrictions for general users. St arti ng the c omput er by password T o sta[...]

User ’s Manual 6-13 Power and Power-Up Modes Panel power on/off Y ou can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it. Please note that this function is only available for Sleep Mode or Hibernation Mode, not for Shut D own Mode. System automa tic Sleep/Hibern[...]

User ’s Manual 7-1 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set up T o run the HW Setup program, cl ick Start -> All Programs -> TO SH IB A -> Utilities -> HWSetup . HW Setup window The HW Setup[...]

User ’s Manual 7-2 HW Setu p Setup This field displays the installed BIOS version , date and EC version . Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password. T o enter a user password: 1. Select Registered to displa y the following pr[...]

User ’s Manual 7-3 HW Setu p Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor . Power On Display This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available a[...]

User ’s Manual 7-4 HW Setu p Y ou can override the settings and manually select a boot device by pressing one of the following keys while the compute r is booting: * 1 The floppy diskette drive will be used to start the computer when there is a bootable disk contained in the external drive. * 2 The external optical disc drive will be used to star[...]

User ’s Manual 7-5 HW Setu p LAN Wake-up on LAN This feature lets the comp uter's power be turned on from shutdown when it receives a wake-up p acket (Magic pa cket) from the LAN. Power will be automatically turn ed on when a signal is received from an administrator's computer whic h is connected via a network. The following settings ca[...]

User ’s Manual 7-6 HW Setu p SA T A eSA T A This feature a llows you to set conditions for SA T A. SA T A Interface setting This feature allo ws you to set SA T A interface setting. Enabled Enables the eSA T A port. (Default) Disabled Disables the eSA T A port in orde r to save power . Performance Let HDD/SSD work with maximum performance. (Defau[...]

User ’s Manual 8-1 Chapter 8 T roubleshooting TOSHIBA have designed this computer for durability , ho wever , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems fr om occurring in[...]

User ’s Manual 8-2 T roubleshooting ■ Before you attach an external device yo u should first turn the computer off, then when you turn the computer back on again it will recognize the new device. ■ Make sure all optional accessories are configured properly in the computer's setup program and tha t all required driver software has been lo[...]

User ’s Manual 8-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals. Basic problems may oc cur in the following areas: System start- up When the computer does not start pr operly , check the following items: ■ Self T est ■ Power Sources ■ Power-on P[...]

User ’s Manual 8-4 T roubleshooting Self test While booting up the computer , self te st is executed aut omatically and the TOSHIBA logo is displayed on the screen. This message remains on the screen for a few seconds. If the self test is successful, the com puter tries to load t he operating system according to how the Boot Priority option is se[...]

User ’s Manual 8-5 T roubleshooting AC power If you have trouble turning on the comp u ter with the AC adaptor connected you should check the status of the DC IN indicator . Please refer to Chapter 6, Power and Power-Up Modes for further information. If the computer has r eached room temperature and it still does not start, or if it st arts but s[...]

User ’s Manual 8-6 T roubleshooting Battery If you suspect a problem with the battery , you should check the status of the DC IN indicator as well as the Battery indicator . Please refer to Chapter 6, Power and Power-Up Modes for more information on these indicators, together with general battery operation. Problem Procedure Battery doesn’t pow[...]

User ’s Manual 8-7 T roubleshooting Real Time Clock Password Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information. Problem Pro cedure The BIOS setting and system date/time are lost. The charge in the Real Time Clock (R TC) battery has run out - [...]

User ’s Manual 8-8 T roubleshooting Internal display p a nel Apparent computer's display pane l problems may be related to the computer's setup and configuration - please refer to Chapter 7, HW Setu p , for further information. Problem Pro cedure No display Press the FN + F5 hot keys to adjust the display priority , and to make sure it [...]

User ’s Manual 8-9 T roubleshooting Hard disk drive Memory Cards: SD/SDHC/SDXC/mini SD/microSD Card, Memory Stick/M emory S tick P RO/Mem ory S tick Duo/Me mory S tick PRO Duo/Memory S tick M icro, xD picture card, M ultiMediaCard For further information, please refer to Chapter 3, Hardware, Utilities and Options . Problem Pro cedure Computer doe[...]

User ’s Manual 8-10 T roubleshooting Pointing device If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse. T ouch Pad Y ou cann ot read a file Check to ensure the req uired file is actually on the Memory Card that is inserted into the computer . If you [...]

User ’s Manual 8-1 1 T roubleshooting USB mouse The reaction of T ouch pad is either too sensitive or not sensitive enough. Adjust the touch Sensitivity . 1. Click Start -> Control Panel -> Hardware and Sound -> M ouse . 2. Within the Mouse Prope rties window , click the Device Sett ings tab. 3. Click the Settings... button. 4. The Prope[...]

User ’s Manual 8-12 T roubleshooting USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. The on-screen pointer moves too fast or too slow In this instance, you should initiall y try changing the speed setting within th e Mouse Control utility . 1. T o access this utili[...]

User ’s Manual 8-13 T roubleshooting USB Sleep and Charge function For more informa tion and settings, please refer to the Using the TOSHIBA Sleep and Charge Function section in Chapter 4, Operating Basics. Problem Pro cedure I cannot use the "USB Sleep and Charge function". USB Sleep and Charge function may be disabled. Select the &quo[...]

User ’s Manual 8-14 T roubleshooting eSA T A device In addition to the information in th is section, please also refer to the documentation supplied with your eSA T A device. External devices connected to the compatible ports do not work when connected to a compatible port. Some external devices may not work when connected to a compatible port if[...]

User ’s Manual 8-15 T roubleshooting Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device. External monitor Please also refer to Chapter 3, Hardware, Utilities and Options , and to the documentation supplied with your monitor for further information. Problem Pro cedu[...]

User ’s Manual 8-16 T roubleshooting LAN Press the FN + F5 hot key in order to change the display priority and ensure th at it is not set for the internal display onl y . Check to see if the external monitor is connected. When the external monitor is set as the primary display device in extended desktop mode, it will not display when the computer[...]

User ’s Manual 8-17 T roubleshooting Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Operating Basics . Prob[...]

User ’s Manual 8-18 T roubleshooting Recovery Media T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance. Before you call Some problems you experience may be related to software or the operating system so[...]

User ’s Manual 8-19 T roubleshooting Where t o writ e If you are still unable to solve the prob lem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia TOSHIBA Australia Pty . Ltd. Information Systems Division Building C, 12-24 T alavera Rd, North Ryde, 21 13, NSW ,[...]

User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Refer to User Informati on Guide about Size. Environmental Requirements Power Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95 °F) 20% to 80% (noncondensing) Non-o[...]

User ’s Manual B-1 Appendix B Display Controller and V ideo mode Display controller The display controller in terprets software commands into hardware commands that turn particular parts on the screen on or of f. The display controller al so controls the video mode and uses industry standard rules to govern the screen resolution and the maximum n[...]

User ’s Manual C-1 Appendix C Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters. Card S pecifications Form Factor PCI Express Mini Card Compati bility ■ IEEE 802.1 1 S tandard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance. The "W[...]

User ’s Manual C-2 Wireless LAN Radio Characteristics Radio Charact eristics of Wireless LAN modu le may vary according to: ■ Country/region where the product was purcha sed ■ T yp e of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been design ed for operati[...]

User ’s Manual C-3 Wireless LAN Supported Freque ncy Sub-bands Subject to the radio regulatio ns that apply in the countries/regions, your Wireless LAN module may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that app ly in the countries/[...]

User ’s Manual C-4 Wireless LAN ■ In a Wireless LAN Access Point, th e Wireless LAN module will use the factory-set default channel (p ri nted in bold), unless the LAN Administrator selecte d a different channel when configuring the Wireless LAN Access Point device. 5GHz Band Channels Sets (W ireless IEEE 802.1 1 Revision a and n) Frequency Ran[...]

User ’s Manual C-5 Wireless LAN *1 Factory-set default channels *2 The channel which can be used depends on th e installed wireless LAN module. And the approved channels on us ing are different at each country or region. The channel configuration is manage d as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the W[...]

User ’s Manual D-1 Appendix D Bluetooth wireless technology Interoperability Bluetooth Adaptor from TOSHIBA ar e designed to be interoperable with any product with Bluetooth wireless te chnology that is based on F requency Hopping S pread S pectrum (FHSS) radio technology , and is compliant to: ■ Bluetooth S pecification V e r . 2.1+EDR, as def[...]

User ’s Manual D-2 Bluetooth wireless technology Interoperability Bluetooth w ireless techno logy and your Health The products with Bluetooth wireless te chnology , like other radio devices, emit radio frequency electromagnetic energy . The level of energy emitted by devices with Blu etooth wireless technology howeve r is far much less than the e[...]

User ’s Manual D-3 Bluetooth wireless technology Interoperability USA-Federal Communications Commission (FCC) This equipment has been tested and fo und to comply with th e limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide re asonable protecti on against harmful interference in a residentia[...]

User ’s Manual D-4 Bluetooth wireless technology Interoperability Ta i w a n Using Bluetooth Adaptor from TOSHIBA equipment in Jap an In Japan, the frequency bandwidth of 2,400 - 2,483.5 MHz for second generation low-power data communication systems such as this equipment overlaps that of mobile object identification syste m s (premises radio sta[...]

User ’s Manual D-5 Bluetooth wireless technology Interoperability 2. Indication The indication shown below appe ars on this equipment. (1) 2.4 : This equip ment uses a frequency of 2 .4 GHz. (2) FH : This equipment uses FH-SS modulation. (3) 1: The interference range of this equi pment is less than 10 m. (4) Th is equipment uses a frequency bandw[...]

User ’s Manual E-1 Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies Length: Minimum 1.7 meters Wire siz[...]

User ’s Manual E-2 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV -F . For the United S tates and Canada, two pin plug configuration must be a 2- 15P (250V) or 1-15P (125V) and three pin plug configuration mu st be 6- 15P (250V)[...]

User ’s Manual F-1 Appendix F T OSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption, battery health and the system cooling, in forming you of significant system conditions. This application recognizes the system and individu al component serial numbers, and[...]

User ’s Manual F-2 TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its st andard limite d warranty in any way . TOSHIBA's st andard limited warranty te rms and limitations apply . St arting the TOSHIBA PC Health Mo nitor The TOSHIBA PC Health Monitor can be started u[...]

User ’s Manual G-1 Appendix G Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are design ed to accommodate all possible configurations for an entire product se ries. Therefore, please b e aware that your selected model may not have al l the features[...]

User ’s Manual G-2 Legal Footnotes ■ use of computer at temperatures out side the range of 5°C to 30°C (41°F to 86°F) or >25°C (77°F) at hi gh altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to you r computer documentation or visit the T oshiba website at www .pc[...]

User ’s Manual G-3 Legal Footnotes Battery Life Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings and features utilized, as well as the natural perf ormance variations produced by the design of indi vidual compone nts. Pu blished battery life numbers are achieved on select mode[...]

User ’s Manual G-4 Legal Footnotes Wireless LAN The transmission speed over th e wireless LAN and th e distance over which wireless LAN can re ach may vary depen ding on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client design and software/hardware configurati ons. The actual transmission spee[...]

User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT : Intel Active Management T echnology ASCII: American S tandard Code for Information Interchange BIOS: basic inp[...]

User ’s Manual Glossa ry-2 Glossary IDE: integr ated drive electroni cs IEEE: Institute of Electrical and Electronics Engineers I/O: input/ output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optica l character recognition (reader) PC: per[...]

User ’s Manual Index-1 Index A AC adaptor 3-3 DC IN 15V jack 2-2 additional 3-30 connecting 1-4 ASCII characters 5-8 B Battery charging 6-5 extending life 6-8 indicator 2-10, 6-2 monitoring capacity 6-7 real time clock 3-3, 6-4 save mode 3-9 types 6-3 Battery pack 2-4, 3-2 replacing 6-8 Bluetooth 3-7, 4-12 Bluetooth Stack for Windo ws by Toshib a[...]

User ’s Manual Index-2 Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series FN + F7 (Brightness Up) 5-4 FN + F8 (Wireless) 5-4 FN + F9 (Touch Pad) 5-4 FN + space (Zoo m) 5-4 Function keys 5-2 G Graphics controller 3-6 H HDD Protection 4-17 HDMI 3-27 HW Setup Boot priority 7-3 CPU 7-5 LAN 7-5 SATA 7-6 USB 7-5 accessing 7-1 display 7-3 g[...]

User ’s Manual Index-3 Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series P Password Starting the computer by 6-12 power on 3-8 problems 8-7 Pointing Device Touch Pad 8-10 Power Hibernation Mode 1-10 Shut Down mo de (Boot Mo de) 1-8 Sleep Mode 1-8 System Auto Off 6- 13 conditions 6-1 indicators 6-2 panel on/off 3-9, 6-1 3 turning off[...]

User ’s Manual Index-4 Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series W Web Camera 2-8, 3-6, 4-2 Wireless LAN 3-7, 4-11 problems 8-17 Wireless communication 4-11 indicator 2-10, 4-14 X xD picture card 3-15 inserting 3-17 removing 3-18[...]