TP-Link TD-8616 инструкция обслуживания

TD-8616 ADSL2+ Modem Rev: 2.0.0 1910010591[...]

COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other br ands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specificat ions may be reproduced in any form or b y any means or used to make any derivativ[...]

FCC STATEMENT This equipment has been tested and found to comply wi th the limits for a Class B digital device, pursuant to part 15 of the FCC Ru les. These limits are designed to pr ovide reasonable protectio n against harmful interference in a residential installation. This equipment ge nerates, uses and can radiate radio frequency energy and, if[...]

DECLARA TION OF CONFORMITY For the following equipment: Product Description: ADSL2+ Modem Model No.: TD-8616 T rademark: TP-LINK We declare under our own respon sibility that the above products satisfy all the technical regulations applicable to the product wi thin the scope of Council Directives: Directives 2004 / 108 / EC, Directives 2006 / 95 / [...]

CONTENTS Package Contents .................................................................................................... 1 Chapter 1. Introduction ........................................................................................ 2 1.1 Product Overview .....................................................................................[...]

TD-8616 ADSL2+ Modem User Guide 1 Package Contents The following items should be found in your package: ¾ One TD-8616 ADSL2+ Modem ¾ One Power Adapter for TD-8616 ADSL2+ Modem ¾ Quick Installation Guide ¾ One RJ45 cable ¾ Two RJ11 cables ¾ One ADSL splitter ¾ One Resource CD , including: z This User Guide z Other Helpful Information ) Note: [...]

TD-8616 ADSL2+ Modem User Guide 2 Chapter 1. Introduction Thank you for choosing the TD-8616 ADSL2+ Modem . 1.1 Product Overview The device is designed to provide a simple and cost-effective ADSL Internet connection for a private Ethernet network. The Modem is easy to use. The TD-8616 connects to an Ethernet LAN or computers via standard Ethernet p[...]

TD-8616 ADSL2+ Modem User Guide 3 Chapter 2. Hardware Installation 2.1 The Front Panel Figure 2-1 The LEDs locate on the front panel, which indicate the device’s working status. For details, please refer to LED Explanation . LED Explanation: Name Status Indication On The modem is powered on. Power Off The modem is off. Please ensure t hat the pow[...]

TD-8616 ADSL2+ Modem User Guide 4 2.2 The Back Panel Figure 2-2 ¾ ON/OFF: The switch for the power. ¾ POWER: The Power plug is where you will connect the power adapter. ¾ RESET: There are two ways to rese t the Modem's factory defaults. Method one: With the Modem powered on, use a pi n to press and hold the RESET button (about 5 seconds) un[...]

TD-8616 ADSL2+ Modem User Guide 5 the rear panel of TD-8616, and insert the other end into the wall socket. Method two ： You can use a separate splitter. Exte rnal splitter can divide the data and voice, and then you can access the Internet and make calls at the same time. The external splitter has three ports: • LINE: Connect to the wall jack [...]

TD-8616 ADSL2+ Modem User Guide Chapter 3. Quick Installation Guide 3.1 Configure PC After you directly connect your PC to the TD-861 6 or connect your adapter to a Hub/Switch which has connected to the Modem, you need to configure your PC’s IP address. Follow the steps below to configure it. Step 1: Click the Start menu on your desktop, right cl[...]

TD-8616 ADSL2+ Modem User Guide 7 Figure 3-2 Step 3: Select General tab, highlight Internet Protoc ol (TCP /IP), and then click the Properties button.[...]

TD-8616 ADSL2+ Modem User Guide 8 Figure 3-3 Step 4: Configure the IP address ( Figure 3-4 ): Enter the IP address as 192.168.1.* (* is any value between 2 to 254, Subnet mask is 255.255.255.0). After that, click OK .[...]

TD-8616 ADSL2+ Modem User Guide 9 Figure 3-4 ) Note: 1) The users of Windows 98 can open TCP/IP Properties according to the following: Right-press (Mouse) Netw ork Neighbor -> Choose Properties -> Double-press TCP/IP. PCI Fast Ethernet Adapter . 2) The words in fact maybe are different with this guide. Now, you can run the Ping command in the[...]

TD-8616 ADSL2+ Modem User Guide 10 Figure 3-5 If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Modem. Figure 3-6 You can check it follow the steps below: 1) Is the connection bet ween your PC and the Modem correct? The LEDs of LAN port which you link to the dev ice and the LEDs on y our PC[...]

TD-8616 ADSL2+ Modem User Guide 11 Figure 3-7 After that you will see the page as follow when ADSL connection is OK. Figure 3-8[...]

TD-8616 ADSL2+ Modem User Guide 12 Chapter 4. Software Configuration This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more abo ut this device and make use of its functions adequately, maybe you will get help from this chapter to configur e the advanced settings [...]

TD-8616 ADSL2+ Modem User Guide 13 Figure 4-2 4.1.2 Traffic Statistics Choose “ Statistics → Traffic Statistics ” menu, and you will be able to view the traffic statistics about the Modem. Figure 4-3[...]

TD-8616 ADSL2+ Modem User Guide 14 4.2 Basic Setup Choose “ Basic Setup ”, you can see the next submenus: WAN Setting, LAN Setting and ADSL. Figure 4-4 Click any of them, and you will be able to configure the corre sponding function. 4.2.1 WAN Setting Choose “ Basic Setup → WAN Setting ” menu, you can configure the parameters for WAN port[...]

TD-8616 ADSL2+ Modem User Guide 15 Figure 4-6 • PVC Pool: PVC Pool contains multiple VPI/V CI sets. The Modem can match PVC automatically and it can be plug and play. The detailed VPI/VCI sets inside PVC Pool are shown in Figure 4-7 , besides you can add VPI/VCI sets to or remove VPI/VCI sets from the PVC pool. Figure 4-7 • Status: If you want [...]

TD-8616 ADSL2+ Modem User Guide 16 Figure 4-8 ¾ Bridge Mode: • PVC Pool: PVC Pool is defaulted as activated. If unnecessary, please do not modify the status of PVC Pool. 4.2.2 LAN Setting Choose “ Basic Setup → LAN Setting ” menu, and you will see t he LAN screen (shown in Figure 4-9 ). Please configure the param eters for LAN ports accord[...]

TD-8616 ADSL2+ Modem User Guide 17 4.2.3 ADSL Choose “ Basic Setup → ADSL ”, you can select the ADSL Type and ADSL Mode in the next screen. The ADSL feature can be selected when you meet the physi cal connection problem. Please check the proper settings with your Internet service provider. Figure 4-10 ¾ ADSL Mode: Select the ADSL operation m[...]

TD-8616 ADSL2+ Modem User Guide 18 Figure 4-12 ) Note: 1) There is only one account that can access Web-based Management page. The default account is "admin", and the password is "adm in". Admin has read/write access privilege. 2) When you change the password, you should enter the new password twice, and then click SAVE to make [...]

TD-8616 ADSL2+ Modem User Guide 19 Step 3: Click the UPGRADE button. ) Note: 1) New firmware vers ions are posted at www.tp-link.com and can be downloaded for free. If the modem is not experiencing diffi culties, there is no need to dow nload a more recent firmware version, unless the version has a new feature that you want to use. 2) When you upgr[...]

TD-8616 ADSL2+ Modem User Guide 20 Appendix A: Specifications General Standards and Protocols ANSI T1.413, ITU G.992.1, ITU G. 992.2, ITU G.992.3, G.992.4, ITU G.992.5, IEEE 802.3, IEEE 802.3u, TCP/IP, HTTP Safety & Emission FCC, CE Ports 1 10/100M Auto-Negotiation RJ45 port （ Auto MDI/MDIX) 1 RJ11 port LEDs Power, LAN, ADSL, Internet Network[...]

TD-8616 ADSL2+ Modem User Guide 21 Appendix B: Troubleshooting T1. How do I restore my Modem’s configuration to its factory default settings? With the Modem powered on, press and hold the RESET button on the rear panel for 5 seconds before releasin g it. Hold it for 5 seconds Once the Modem is reset, the current configuration settings will be los[...]