TP-Link TL-SG1008P инструкция обслуживания

User Guide TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE Rev ˖ 1.0.0 7106504137[...]

[...]

COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and p roduct names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative su[...]

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when th e equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radi[...]

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authorit y to operate the equipment. CE Mark Warning This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. SAFETY NOTICES Cau[...]

CONTENT Package Contents ...................................................... 1 Chapter 1. Introductio n of the Product .......................... 2 1.1 Overview of the Produc t ...................................... 2 1.2 Convention ............................................................ 3 1.3 Features ......................................[...]

1 Package Contents The following items should be found in your box: ¾ One TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE ¾ One DC Power Adapter ¾ Four rubber cushions to be used under the Switch ¾ This User Guide Note Make sure that the box contains the above items. If any of the listed items are damaged or missing, please contact you[...]

2 Chapter 1. Introduction of the Product Thank you for choosing the TL-S G1008P 8-Port Gigabit Desktop Switch with 4-Port PoE. 1.1 Overview of the Product The TL-SG1008 P 8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless n etwork connection, which integrates 1000Mbps Gigabit Ethernet, 1 00Mbps Fast Ethernet and 10Mbps Ethernet net[...]

3 1.2 Convention The Switch or TL-SG1008P mentioned in this User Guide stands for TL-SG1008P 8-Po rt Gigabit Desktop Switch with 4-Port PoE without any explanation. 1.3 Features ¾ Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.3af standards ¾ 8 10/100/1000Mbps Auto-Negotiation RJ45 ports with 4 ports supporting PoE function[...]

4 Chapter 2. Installation During the installation procedure, please only use the accessories equipped with the Switch. 2.1 Mounting the Switch on a Desk To install the Switch, please follow the steps: 1) Place the Switch on a flat desk. 2) Remove the adhesive backing papers from the rubber cushions. 3) Turn over the Switch and attach the supplied f[...]

5 2) Then, the 1000Mbps and Link/Act LED indicators will flash momentarily for one second, which represents a resetting of the system. Note If the LED indicators don’t respond as described above, please check the power supply and its connection. Chapter 3. Identifying External Components This Chapter describes the front panel, rear panel and LED [...]

6 Name Status Indication On (green) There is a PoE PD connected to the p ort, which supply power su ccessfully. Flashing (green) The PoE power circui t may be in sh ort or the power current may be overloaded. PoE ports (ports1~4) Off No PD is connected to the corresponding port, or no power is supplied a ccording to the pow er limits of the port. O[...]

7 Note If all PoE PDs power consumption is >= 53W, a priority * will be arranged among the PoE ports like port-1 = port-2 = port-3 > port-4, then the system will cut off the power of the lowest-priority port. *Priority: This function will help protect the system when the system power is overloaded. For example, Port 1, 2 and 4 is using 15.4W [...]

8 ¾ PoE Ports (1-4): These ports support PoE function which integrates power and data onto one Ethernet cable. Once the device you connect to the Switch is identified, the Switch will supply power through the PoE port, and then you can use it as a 10/100/1000Mbps Auto-Negotiation RJ45 Ethernet port. The working status can be indicated by the corre[...]

9 Appendix A: Specifications General Standard IEEE802.3, IEEE80 2.3u, IEEE802.3a b IEEE802.3x, IEEE802.3a f Protocol CSMA/CD Ethernet: 10Mbps (Half Duplex ) 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex ) 200Mbps (Full Duplex) Data Transfer R ate Gigabit Ethernet: 2000Mbps (Full Duplex ) 10Base-T: UTP category 3, 4, 5 cable (maximum 100m[...]

10 MAC Address Learning Automatically learning, automatically aging 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Por t Frame Filter Rate 1000Base-T: 1488000pps/Port 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Por t Frame Forward Rate 1000Base-T: 1488000pps/Port Environmental and Physical Power Consumption 5.8 Watts (max. no PD connected) 58.8 Wa[...]