Tricity Bendix TBWM 1110 инструкция обслуживания

W ASHING MACHINE TBWM 1110 OPERA TING & INST ALLA TION INSTRUCTIONS 132975530[...]

2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst[...]

3 Contents F or the User Important Safety Infor mation 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 Child safety feature 5 The Control Panel 6-9 Programme information 8 Operating sequence 9-10 Load the laundry 9 Measure out the detergent and the fabric softener 9 Switch the machine on 9 Select the requi[...]

4 Y our New W ashing Machine Y our new washing machine meets all moder n requir ements for ef fective tr eatment of laundry with low water , energy and detergent consumption. Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric. ● Automatic cooling of t[...]

5 Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Filter 5 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric softener Child safety f eatur e This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. T o activate th[...]

1 Deter gent dispenser dr a w er 2 Mains-on light This light comes on when the “ on/off ” button is pressed, and goes out when it is pressed again. 3 “On/Off ” button Press this button to switch the machine on. Press it again to switch the machine off. Programme Option buttons Depending on the programme, different functions can be combined.[...]

7 6 “pr e w ash “button The machine performs a prewash cycle at 30°C max. The prewash cycle ends with a short spin at 650 r .p.m. in programmes for cottons and synthetics , and with emptying of the water for delicates . This option is not available with the wool/(handwash) programme , soak 30 and mini 30. For use when washing heavily soiled la[...]

8 The selector dial can be turned either clockwise or anticlockwise. Position E in cottons and synthetics sectors corresponds to the ENERGY SA VING programmes and position to “cold wash”. At the end of the programme the selector dial must be turned to position “off” (reset) and the “on/off” button must be pressed to switch the machine o[...]

9 “softener” Hand washed cotton garments can be softened with this programme. The machine performs 1 rinse, followed by a final spin at the max. speed, which can be reduced by depressing the “ spin ” button. “drain” For emptying out the water of the last rinse in programmes with the “ rinse hold ” option or at the end of the Soak 30[...]

10 The pilot lights corresponding to the different phases making up the selected programme light on. If your laundry needs a soak time, turn the programme selector dial to “ soak 30 ” and then, before starting a washing cycle, drain the water as described in the “End of Soak 30 programme ” paragraph. 5. Select the “spin” speed or “rin[...]

11 W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150-2[...]

12 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR[...]

13 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING[...]

14 W ashing Pr ogrammes * The “ Cotton Whites and fast colours Economy ” programme at E60° C is the reference programme for the data entered in the energy label, in compliance with EC 92/75 standards. ** This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry , the temperature[...]

15 This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry , the temperature of the water supply and the ambient temperature. SPIN SPEED/ RINSE HOLD EXTRA RINSE EASY IRON SPIN SPEED/ RINSE HOLD SPIN SPEED SPIN SPEED/ RINSE HOLD Programme Additional functions 5 kg 5 kg 5 kg - 5 kg 2[...]

16 Cleaning the dr a w er r ecess Having removed the drawer , use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess. Replace the drawer and run the rinse programme without any clothes in the drum. Cleaning the filter The water drain filter A clean filter is important f[...]

17 Unscrew and remove the filter . Clean carefully under a fast running tap. Wa r n i n g When the appliance is in use and depending on the programme selected there can be hot water in the filter . Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty . When replacing the filter , ensure i[...]

18 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Force Centre, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault caused by [...]

19 Symptom The door will not open Possible causes ● The water level is above the bottom edge of the door . ● The machine is heating the water . ● The drum is turning. Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry[...]

20 Guarantee Conditions Standar d guar antee conditions W e, T ricity Bendix, undertake that if, within 12 months of the date of the purchase, this T ricity Bendix appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labou[...]

21 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co[...]

22 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed. Remove the polystyrene b[...]

23 If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system. There should be a minimum vertical distance of 5.02m (16.5 ft) between the appliance’ s inlet and the bottom of the water storage tank. Set the hoses correctly by loosening the ring nuts. Afte[...]

24 Important ● Before connecting the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes. ● For a correct functioning of the machine the drain hose must be hooked on the proper support piece situated on the top of the back [...]

25 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same[...]

26 Building-in This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. When installing the appliance into the kitchen furniture ensure, if possible, the hoses are placed in either of the two recesses on the back of the appliance. This will help to prevent the hoses from beco[...]

27 If the door has to be opened from left to right, invert the position of the plates (7), the magnet (4) and the plate (5) (Fig. B and E). Mount the countermagnet (6) and the hinges (1) as previously described. Recommendations r e gar ding the construction and fitting of a base when the installa tion r equir es an integr ated appliance to be r ais[...]

T ricity Bendix, Addington W ay , Luton, Bedfordshir e LU4 9QQ Consumer care telephone number 08705 950950 © Electrolux plc 2007[...]