Trilogy Touch Technology 9 инструкция обслуживания

INSTALLATION GUIDE ISSUE 9 TRILOGY COMMUNICATIONS LIMITED 26 Focus Way And o ver Hampshire SP10 5NY United Kingdom Telephone. +44 (0) 1264 384000 Fax. +44 (0) 1264 334806 www.trilogycomms.com DIGITAL INTERCOM[...]

The Copyright of the information and drawings in this document is the property of Trilogy Communications Limited of Andover, Hampshire and is neither to be reproduced in whole or in part, nor disclosed to a third party, without the prior written consent of Trilogy Communications Limited. The information in this document has been carefully compile d[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 3 of 81 ERRATA SHEET This sheet contains information regarding errors in this u ser guide. Date Description - None[...]

Commander Installation Guide Page 4 of 8 1 Issue 9 Trilogy Communications Limited CONTENTS 1.  INTRODUCTION .................................................................................................. 7  1.1  O PTIONS A VAILABLE AND M ODULE T YPE N UMBERS ......................................................... 7  2.  INSTALLA[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 5 of 81 5.  CONTROL P ANELS .......................................................................................... 35  5.1  I NTRODUCTION ............................................................................................................ 35  5.2  C [...]

Commander Installation Guide Page 6 of 8 1 Issue 9 Trilogy Communications Limited  8.  LEGACY HAR DWARE ...................................................................................... 61  8.1  M ATRIX C ARDS ............................................................................................................ 61  8.1.1 ?[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 7 of 81 1. I NTRODUCTION This manual provides installation information for the Commander Digital Intercom system. Cabling and pin-out information is included for all of the Trilogy manufactured items plus some commonly used third party equipment. Other information relating to [...]

Commander Installation Guide Page 8 of 8 1 Issue 9 Trilogy Communications Limited[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 9 of 81 2. I NSTALLATION 2.1 INTRODUCTION Follow the sequence below, step by step, to install the Commander matrix. • Unpack the matrix • Fit the matrix frame and power supplies into the equipment bay • Load the modules into the matrix frame, in sequence • Apply power [...]

Commander Installation Guide Page 10 of 81 Issue 9 Trilogy Communications Limited 2.4 SYSTEM ASSEMBLY If the system is multi-frame (i.e. > 96 ports), it will be supplied with fra me 1 at the bottom and frames 2,3,4 etc. ascending from there. Some earlier systems were supplied with the frames configured in descending order. The system modules wil[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 11 of 81 2.4.1 500-08 SERIES CHANGEOVER CARD The 500-08 Changeover Card is fitted at the left of each frame. Make sure the metal tab is hooked into the clip on the side cheek. Ensure t he top and bottom edge connectors are both making good contact. The current version of this [...]

Commander Installation Guide Page 12 of 81 Issue 9 Trilogy Communications Limited 2.4.2 500-02 SERIES TALKBACK CONTROLLER CARD There are currently two versions of the Talkback Controller: -. • 500-02-11, which has on-board Flash Ram fitted at all times • 500-02-12, which updates the 500-02-11 and provides improved serial communication. They are[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 13 of 81 2.4.3 500-01 SERIES TDM CONTROLLER CARD The current version of the TDM card is: • 500-01-10 which replaces the 500-01-00. The main TDM controller is fitted in the left side of the fram e, immediately to the right of the 500-08 / 500-02 combination. The standby contr[...]

Commander Installation Guide Page 14 of 81 Issue 9 Trilogy Communications Limited 2.4.4 500-25-00 E1 NETWORK LINK CARD This optional card has a number of front mounted LEDs and a D9 programming socket. The system will normally be assembled by Trilogy with the appropriate rear connector units (RCU). Check the rear of the frame for the Network RCU ( [...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 15 of 81 2.4.6 500-06 SERIES MATRIX CARDS Finally, fit these in the remaining positions. Depending on the system order, the quantities of matrix cards and RCU’s may not match exactly. The current version is part no. 500-06-02; legacy versions are covered in section 8.1. The [...]

Commander Installation Guide Page 16 of 81 Issue 9 Trilogy Communications Limited 2.5 MAINS CONNECTION AND FUSING 2.5.1 500-15-30 SERIES POWER SUPPLY The PSU chassis occupies an additional 2U of rack spa ce below the matrix and is internally wired. The complete assembly therefore occ upies 8U for a 96 port system, 14U fo r a 192 port system etc. Th[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 17 of 81 2.6 STARTING THE SYSTEM The system may now be powered and will load a configur ation from the Flash RAM. The miniature rotary switch on the front edge of the 500-02 Talkback Controller selects the boot configuration bank. In a multi-frame system, th is is the 500-02 T[...]

Commander Installation Guide Page 18 of 81 Issue 9 Trilogy Communications Limited If this phase is successf ul and the TDM controller is running correctly, switch off the system. Turn the flash bank selector switch to an active bank ( i.e 1,2,3 or 4) and re-start the system. The yellow polling LED on the 500-02 Talkback Controller will start to fla[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 19 of 81 3. C ONNECTING TO THE M ATRIX 3.1 CONNECTING THE MATRIX PORTS The following drawing shows the rear view of a fully equipped 6U rack. Connectors are provided for the P.C., status alarms, panels and externals. These connectors are wired as detailed below. Connector type[...]

Commander Installation Guide Page 20 of 81 Issue 9 Trilogy Communications Limited 3.2.2 CONNECTION VIA A 5 00-16-03 DOWNL OAD CONVERTER BOX A single frame (96 port) Commander system has two interfaces which may be used for downloading configuration data: • Serial port (RS232/422) • High speed (20MB/s) transputer port With a standalone system, t[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 21 of 81 3.3 INSTALLING PATHFINDER PathFinder is the configuration editor for the Trilogy Commander intercom system. Details of PC specification and operating system requirements are given in Section 9.6. Software is supplied on CD-ROM. For a new installation, insert the disk [...]

Commander Installation Guide Page 22 of 81 Issue 9 Trilogy Communications Limited Make any changes as required. Ensure that there are no system conflicts with other PC hardware by using the Windows Device Manager. Conflicts with other hardware such a s sound cards and network cards may prevent the download adaptor from functioning correctly.. Any c[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 23 of 81 3.4 OTHER MATRIX CONNECTIONS A number of other connections are provided on the rear of the matrix. For legacy Sub D9 matrix connectors, see section 8.4. 3.4.1 MATRIX PORTS – RJ-45 Commander systems delivered from spring - 2003 onwards are fitted with RJ-45 connector[...]

Commander Installation Guide Page 24 of 81 Issue 9 Trilogy Communications Limited 3.4.3 SERIAL LINK (RS232 / RS422) The current version of PC connector plate, which is fitted on the rear right hand side of the Commander Matrix frame, provides either RS232 or RS422 connection capability. The factory default setting is RS232: this may be changed by r[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 25 of 81 3.4.5 MISCELLANEOUS I/O CARD CON NECTOR PIN-OUT This optional connector back has 2 off D25 fixed sockets fo r logic outputs, a single D37 fixed plug for logic inputs and a single D9 fixed socket for RS232/422 control and a monitoring audio output. To activate the logi[...]

Commander Installation Guide Page 26 of 81 Issue 9 Trilogy Communications Limited Miscellaneous I/O Card Output Connections Commander D25 Fixed Socket Pins Upper Connector Description 1 Ground 2/14 Output 1 3/15 Output 2 4/16 Output 3 5/17 Output 4 6/18 Output 5 7/19 Output 6 8/20 Output 7 9/21 Output 8 10/22 Output 9 1 1/23 Output 10 12/24 Output [...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 27 of 81 3.4.5.1 500-10 Switches and Indicators Power Indicators. +5V (upper), +/- 12V (lower). Bargraph audio input level meter. Select source on three rotar y switches immedi ately below. Level is indicated in 4dB steps from +16dB (upper) to -2 0dB (lower). Select 1 ' s[...]

Commander Installation Guide Page 28 of 81 Issue 9 Trilogy Communications Limited 3.4.5.2 Suggested external wiring of Misc I/O card output The circuit below shows suggested wiring for Output 1 of the 500-10-00 Misc I/O logic card. Maximum current through the output stage must be limited to 200mA and the maximum permitted external voltage is +200V.[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 29 of 81 3.4.5.3 500-25 Network Card Indicators and Switches Reset 8 way DIP Switch 1 | | | | 8 1 | | | | | | | | | 13 LED Legend Activity Function D8 +5V On +5V D1 1 1Hz DSP 1 OK D2 2 2Hz DSP 2 OK D6 RESET Off Reset D3 NO E1 CLK Off if net available No E1 Clock D9 TDM D Off w[...]

Commander Installation Guide Page 30 of 81 Issue 9 Trilogy Communications Limited 3.5 CONFIGURING THE GAIN OF CAMERA INPUTS. 3.5.1 LINK SETTING ON 500-06-02 The gain of port 6 on the 500-06-02 -matrix card is set by a jumper link on the board. Jumper J7 should be set to N for normal operation or to C to increase the gain of port 6 by +25dB. If 500-[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 31 of 81 4. N ETWORKING 4.1 CONNECTING NETWORKED SYS TEMS The optional Network hardware comprises two components: • 500-25 Network Card • 500-26 Network Rear Connector Unit (RCU) The RCU provides the interface to other networked Commander systems. Note that: • Interconne[...]

Commander Installation Guide Page 32 of 81 Issue 9 Trilogy Communications Limited A simple 3 matrix LAN is shown below. The M CR matrix is fitted with two Network Cards. Routes from Studio A to Studio B are made via the matrix in MCR. For clarity, only th e RJ45 connections are shown. Or Connect a single CAT5 cable (non- crossover) between two RJ45[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 33 of 81 4.2 SERIAL NETWORKING Matrices may also be interconnected using a serial communication port (com port) plus a number of audio tie lines (4-wires). Since a 96 port Commander Matrix has only one com port, if it utilised for networking, then the PathFinder download must [...]

Commander Installation Guide Page 34 of 81 Issue 9 Trilogy Communications Limited[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 35 of 81 5. C ONTROL P ANELS 5.1 INTRODUCTION There are now a number of different generations of Trilogy control panels in service. Those which are part of the current range are listed in the following section. Panels which are no longer supplied (legacy range) are covered in [...]

Commander Installation Guide Page 36 of 81 Issue 9 Trilogy Communications Limited 5.3 CONTROL PANEL FA CILITY COMPARISON TABLE A series of additional connectors provide the following facilities, on the panel types indicated in the table. 500-3x-5x Control Panels 500-31-60 16 lever key p anel. 500-41-xx Desktop 500-42-50 1U, 10 key with displays 500[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 37 of 81 5.4 500-41-XX SERIES DESKTOP PANELS Early desktop panel were DC powered from a mains power supply unit connected v ia a mini DIN connector on the rear. From 2003 onwards, panels have an internal mains power supply. The only remaining user connection is to the Headset [...]

Commander Installation Guide Page 38 of 81 Issue 9 Trilogy Communications Limited 5.5 500-31-51 16 KEY PLUS DIAL PAD CONTROL PANEL Information about the following legacy panel types is also included here. • 500-30-50 24 key panel (with internal loudspeaker) • 500-31-50 16 key panel • 500-32-50 8 key panel • 500-32-51 8 key panel with dial p[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 39 of 81 5.5.2 500-3X-5X SERIES STANDARD CONTROL PANEL REAR VIEW 5.5.3 500-3X-5X SERIES CONTROL PANEL CONNECTIONS Matrix – RJ-45 fixed socket on panel RJ-45 Pin Function 1 Panel Data out + Pair 1 2 Panel Data out - 3 Panel Data In + Pair 2 6 Panel Data In - 5 Panel Audio out[...]

Commander Installation Guide Page 40 of 81 Trilogy Communications Limited Issue 9 GPIO (Local logic in and out) - D9 Fixed Socket Pin Function Notes 1 Ground 2 Logic Input 1 3 Logic Input 2 4 Logic 2 Out Common 5 Internal +5V (Out) Protected with series 44R & 1N4002 diode. 6 Logic Output 1 7 Logic 1 Out Common 8 Logic Output 2 9 Logic Input +VC[...]

Commander Installation Guide Issue 9 Trilogy Communications Limited Page 4 1 of 81 5.5.4 500-3X-5X SERIES DIP SWITCH SETTINGS Within the panel a series of DIP switches determine the correct panel type. These are factory set and are included for reference in Appendix 1. A further set of DIP switches are user accessible at the rear of the panel and c[...]

Commander Installation Guide Page 42 of 81 Trilogy Communications Limited Issue 9 5.6 500-43-50 12 WAY ROTARY ENCODER EXPANSION PANEL These may only be connected to panels from the 500-xx--5x range. Information about the following legacy panel types is also provided here: • 500-43-51 1U, 8 REN level control panel 5.6.1 SPECIFICATION Dimensions 48[...]

Commander Installation Guide Trilogy Communications Limited Page 43 of 81 Issue 9 5.7 500-42-50 1U, 10 LEVER KEY PANEL WITH LED DISPLAYS. Information about the following legacy panel types is also provided here: • 500-44-50 1U, 10 lever key reduced facility control panel without displays. • 500-44-51 5.7.1 SPECIFICATION Dimensions 485mm wide x [...]

Commander Installation Guide Page 44 of 81 Trilogy Communications Limited Issue 9 Headset - 5 Pin XLR Fixed Socket (front panel) Pin Function 1 Mic IN (Screen) 2 Mic IN 3 Headset Gnd 4 Headset Out 5 Headset Out Foot Switch - D9 Fixed Socket Pin Function 1 Foot Switch Input 2 No Connection 3 Chassis Ground 4 No Connection 5 No Connection 6 Ground 7 [...]

Commander Installation Guide Trilogy Communications Limited Page 45 of 81 Issue 9 Keypad D9 Fixed Socket Pin Function Notes 1 Column 1 Switch 1,4,7, * 2 Column 3 Switch 3,6,9,# 3 Row 2 Switch 4,5,6 4 Row 4 Switch *,0,# 5 GND For switch LEDs 6 Column 2 Switch 2,5,8,0 7 Row 1 Switch 1,2,3 8 Row 3 Switch 7,8,9 9 +12V out Switch View of Keypad (as seen[...]

Commander Installation Guide Page 46 of 81 Trilogy Communications Limited Issue 9 5.9 500-31-60 STANDARD FACILITY 16 KEY CONTROL PANEL The 500-31-60 panel provides 16 programmable lever keys in a 2U rack mount chassis. For information on programming the software driven “cut switch” operation, see section 10.3. 5.9.1 SPECIFICATION Dimensions 485[...]

Commander Installation Guide Trilogy Communications Limited Page 47 of 81 Issue 9 GPIO (Local logic in and out) - D9 Fixed Socket Pin Function Notes 1 Ground 2 Logic Input 1 3 Logic Input 2 4 Logic 2 Out Common 5 Internal +5V (Out) Protected with 0.5A thermal fuse & 1N4002 diode. 6 Logic Output 1 7 Logic 1 Out Common 8 Logic Output 2 9 Logic In[...]

Commander Installation Guide Page 48 of 81 Trilogy Communications Limited Issue 9 5.10 500-33-00 / 500-45-00 / 500-46-00 RANGE Although offering differing types and numbers of switches and displays, these panels share the same electronics and connectivity. • 500-33-00 32 way lever key • 500-45-00 8 way push button • 500-46-00 10 button, LC ke[...]

Commander Installation Guide Trilogy Communications Limited Page 49 of 81 Issue 9 GPIO (Local logic in and out) - D9 Fixed Socket Pin Function Notes 1 Ground 2 Logic Input 1 3 Logic Input 2 4 Logic 2 Out Common 5 Internal +5V (Out) Protected with 0.5A thermal fuse & 1N4002 diode. 6 Logic Output 1 7 Logic 1 Out Common 8 Logic Output 2 9 Logic In[...]

Commander Installation Guide Page 50 of 81 Trilogy Communications Limited Issue 9[...]

Commander Installation Guide Trilogy Communications Limited Page 51 of 81 Issue 9 6. C OMMANDER P ROGRAMMING K IT 6.1 INTRODUCTION This utility allows software to be updated on certain hardware items from the Commander range. These are: - • 500-02-1x Talkback Controller • 500-01-10 TDM Controller • 500-08-10 Changeover Controller • 500-3x-3[...]

Commander Installation Guide Page 52 of 81 Trilogy Communications Limited Issue 9 6.2.2 STARTING THE PROGRAMME From the Start menu, select the item “TTprog” to launch the program. The window shown below is displayed. From the drop-down list, select the type of hardware to be r eprogrammed (see Section 6.1). To update t he hardware, a revised ?[...]

Commander Installation Guide Trilogy Communications Limited Page 53 of 81 Issue 9 6.2.3 CONNECTING THE HARDWA RE The instructions below assume that the PC is currently fitted with a suitable transputer link adaptor card and is in use for the PathFinder application. • Close PathFinder • Identify the download interconnection cable. ¾ For desktop[...]

Commander Installation Guide Page 54 of 81 Trilogy Communications Limited Issue 9 6.2.4.4 500-08-10 Changeover Card An additional adaptor cable must be fitted between the D9 on the mauve re-programming cable and the 10 pin Molex connector (J6) that is the connection point on the 500-08-10. Wiring details are given below. 10 way IDT Header (500-08-1[...]

Commander Installation Guide Trilogy Communications Limited Page 55 of 81 Issue 9 7. O THER E QUIPMENT 7.1 BELTPACKS Beltpacks may be connected to the Commander matrix on ports configured as 4-wire. They require an external voltage supply, either +15V or ± 15V depending on the type number. The Commander PSU (500-15-30) provides a 4 pin XLR socket [...]

Commander Installation Guide Page 56 of 81 Trilogy Communications Limited Issue 9 7.2 TELEPHONE INTERFACES The Trilogy 500-19 range of equipment provides full DTMF t elephone facilities when used in conjunction with the Telos ONE “smart” telephone hybrid. To obtain the full facilities available with the Commander system, the Telos ONE should be[...]

Commander Installation Guide Trilogy Communications Limited Page 57 of 81 Issue 9 7.2.1 TELOS ONE ALIGNMENT The level adjustment of the Telos ONE hybrid unit is fairly critical. Slight variations can cause the unit to fail to initiate outgoing calls. The usual symptom will be failure to break the dial- tone when pressing keys on the dial-pad of a T[...]

Commander Installation Guide Page 58 of 81 Trilogy Communications Limited Issue 9 7.3 RT EQUIPMENT Radio Talkback equipment may be supplied by Trilogy as part of a complete system. It is not manufactured by Trilogy and will be supplied with the original equipment manuals. The usual configuration consists of one or more Base Stations and a number of[...]

Commander Installation Guide Trilogy Communications Limited Page 59 of 81 Issue 9 7.4.1.2 ISDN Interface RJ45 Connector RJ45 Fixed Socket Pin 1 Not connected Pin 2 Not connected Pin 3 Tx to network A/Rx from terminal A Pin 4 Rx from network A/Tx to terminal A Pin 5 Rx from network B/Tx terminal B Pin 6 Tx to network B/Rx from terminal B Pin 7 Not c[...]

Commander Installation Guide Page 60 of 81 Trilogy Communications Limited Issue 9 7.5 500-23-00 ICIS-2 ISDN INTERFACE The ICIS-2 ISDN interface provides complete remote panel functionality over an ISDN2 link. It is connected directly to the matrix at the studio end, then to the control panel at the remote end. No additional interfaces are required.[...]

Commander Installation Guide Trilogy Communications Limited Page 61 of 81 Issue 9 8. L EGACY H ARDWARE The following hardware is no longer supplied by Trilogy Communications. 8.1 MATRIX CARDS • 500-06-00 is marked 5510 on the card ejector since the base card is manufactured by Pro-Bel. It carries a Trilogy designed sub board. • 500-06-01 replac[...]

Commander Installation Guide Page 62 of 81 Trilogy Communications Limited Issue 9 8.1.2 GAIN SETTING ON 500-06-01 The gain of port 6 on the 500-06-01 matrix card is set by a jumper link on the board. Jumper J6 should be set to N for normal o peration or to C to increase the gain of port 6 by +25dB. The diagram below shows the position of J6. 8.2 PO[...]

Commander Installation Guide Trilogy Communications Limited Page 63 of 81 Issue 9 8.3.2 INSTALLING AN ARCHIPEL DOWNLOA D CARD IN A P.C. The Archipel card is a proprietary, half-length ISA bus adaptor card that allows data to be converted into the 20Mbit/s serial data link used by Commander. If Trilogy Communications has supplied a P.C., an Archipel[...]

Commander Installation Guide Page 64 of 81 Trilogy Communications Limited Issue 9 8.3.3 INSTALLING A CARDPORT ISA TO PC MCIA ADAPTOR INTO A DESKTOP PC The CardPort adaptor will normally be supplied by Trilogy although similar units by other manufacturers are available. Comprehensive instructions are included with the CardPort unit but the list belo[...]

Commander Installation Guide Trilogy Communications Limited Page 65 of 81 Issue 9 8.3.5 BLACK BOX IC114A PCMCIA SERIAL ADAPTOR CARD. This adaptor card may be provided with single frame Commander systems, fitted with the current 500-02-12 Talkback Controller. It provides full RS422 communication at 38.4kBaud. The adaptor is supplied with installatio[...]

Commander Installation Guide Page 66 of 81 Trilogy Communications Limited Issue 9 8.4 MATRIX PORTS – D9 The same connector pin-out applies to ports used for panels or externals. External (4-wire) connections will not use the data pai rs. Cable is quad twisted 100 Ω pair, with overall screen. STP or FTP cables should be used for all insta lled ca[...]

Commander Installation Guide Trilogy Communications Limited Page 67 of 81 Issue 9 8.5 LEGACY CONTROL PANELS • 500-3x-10 series formed the original seri es. The electronics is modular based. These panels fall outside the scope of this manual but any technical queries may be addressed to Trilogy Communications. • 500-3x-3x series were supplied fr[...]

Commander Installation Guide Page 68 of 81 Trilogy Communications Limited Issue 9 8.5.2 500-3X-3X SERIES CONTROL PANELS The following detail refers to these panel types: • 500-30-30 24 key panel • 500-31-30 16 key panel • 500-31-31 16 key panel with dial pad • 500-32-30 8 key panel • 500-32-31 8 key panel with dial pad Dimensions 485mm wi[...]

Commander Installation Guide Trilogy Communications Limited Page 69 of 81 Issue 9 8.5.2.2 500-3x-3x Series Control Panel Connections Matrix – D9 Fixed Plug Pin Function 1 NC (Screen) 2 Data Out- 3 Data In- 4 Audio Out- 5 Audio In- 6 Data Out + 7 Data In + 8 Audio Out 9 Audio In + Test Port– D9 Fixed Socket Pin Function 1 Analyse Input 2 Enable [...]

Commander Installation Guide Page 70 of 81 Trilogy Communications Li mited Issue 9 Audio I/O – D15 Fixed Socket Pin Function Notes 1 Slave Mic Input Line level, un-balanced 2 +15V Out (for slave mic panel) NOT protected! 3 Clean Mic Out + Line level, balanced, pair with 1 1 4 Ext CUT Input (for slave mic p anel) Parallel function to front panel C[...]

Commander Installation Guide Trilogy Communications Limited Page 7 1 of 81 Issue 9 8.5.4 500-40-0X SERIES EXPANSION PANELS Control Panels may be linked together to provide additional facilities at one operating position. Additional level controls (RENs) or switches may be added. Alternatively, two standard panels from the 500-30 series may be linke[...]

Commander Installation Guide Page 72 of 81 Trilogy Communications Li mited Issue 9 8.5.4.2 500-40-0x Series Control Panel Rear View 8.5.4.3 Typical expansion panel configuration Since the 500-3x-3x series panels (“Standard” 8 / 16 / 24 key) only have a single expansion connection, they must form either the first or last panel in a chain. Expans[...]

Commander Installation Guide Trilogy Communications Limited Page 7 3 of 81 Issue 9[...]

Commander Installation Guide Page 74 of 81 Trilogy Communications Li mited Issue 9 8.5.4.4 500-3x-3x Series Expansion panel interconnection cables Type A (max. length 10 metre) D9 Free Plug - Pin Function Function D9 Free Plug - Pin 4 T ransputer Data out + Pair 1 T ransputer Data in + 4 8 T ransputer Data out - T ransputer Data in - 8 5 T ranspute[...]

Commander Installation Guide Trilogy Communications Limited Page 7 5 of 81 Issue 9 8.5.6 500-39-30 / 31 1U 12 KEY PANEL WITH LOUDSPEAKER This panel provides more basic facilities tha n the 500-30 range. It does not have LCD displays and only provides connection to the matrix, audio I/O and the test port at t he rear. An installation specificat ion [...]

Commander Installation Guide Page 76 of 81 Trilogy Communications Limited Issue 9 8.5.6.2 500-39-30 Rear View 8.5.7 500-3X-5X SERIES CONTROL PANELS For information on the following legacy panels, please refer to section 5.5. • 500-30-50 24 key panel (with internal loudspeaker) • 500-31-50 16 key panel. • 500-32-50 8 key panel. • 500-32-51 8[...]

Commander Installation Guide Trilogy Communications Limited Page 77 of 81 Issue 9 9. S PECIFICATION 9.1 GENERAL Max. Number of Ports 384, 96 per 6U Frame, expandable in 6 port units 9.2 MATRIX AUDIO SPECIFICATION (USING 500-06-02 MAT RIX CARDS) Port T ype 4 wire electronically balanced Frequency Response -3dB @ 25Hz and 15.5kHz Nominal Gain 0dB ± [...]

Commander Installation Guide Page 78 of 81 Trilogy Communications Limited Issue 9 9.5 MISCELLANEOUS I/O CARD Number of physical Inputs 28, groundin g contact Number of physical Outputs 24, earth-free opto-isolated mosfet Loopback I/O Outputs 29-40 internally loped back to inputs 29 to 40. T one Generator 3 tones generated, 315Hz, 1kHz, 1.9kHz “Bl[...]

Commander Installation Guide Trilogy Communications Limited Page 79 of 81 Issue 9 10. C ONTROL P ANEL C ONFIGURATION 10.1 500-3X-5X SERIES INTERNAL PANEL SWITCH SETTINGS Id DIP Switch Action DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7 Legacy Emul. DIP 8 5/8 Char 0 8 Key or Desktop OFF OFF OFF OFF OFF OFF OFF OFF 1 8 Key Expansion ON OFF OFF OFF OFF O[...]

Commander Installation Guide Page 80 of 81 Trilogy Communications Limited Issue 9 10.3 500-31-60 – PROGRAMMING CUT SWITCH OPERATION The cut switch operation is set by via the assign mechanism: press the assign switch, depress any key, turn the Rotary Encoder (REN) until CutSw is displayed and then press the same key again. The LCD will display as[...]

Commander Installation Guide Trilogy Communications Limited Page 81 of 81 Issue 9 11. 500-16-03 D OWNLOAD C ONVERTER S UPPL EMENTARY I NFORMATION 11.1 SAFETY PRECAUTIONS This equipment has been designed and tested to the highest safety standards. The following precautions should be covered to ensure safe operation of the apparatus. 11.2 TRANSPORTAT[...]