Uniden DS72 инструкция обслуживания

DS72 Digital Spread Spectrum provides the longest range, the clearest sound and the best privacy . MANUAL OWNER’S[...]

[...]

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . 3 Important Electrical Considerations . . . . . . . . . . . . . . . . . . 4 Introduction W elcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Features . . . . . . .[...]

2 Before you read anything else, please observe the following: W arning! UNIDEN DOES NOT represent this unit to be waterproof. T o reduce risk of fire, electrical shock or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Metal Hydride Battery Warning • This equipment contains a rechargeable Ni-MH battery . • [...]

3 PRECAUTIONS When using your telephone equipment, these basic safety precautions should always be followed to reduced the risk of fire, electrical shock, and injury to persons: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning, and use[...]

4 instructions. Improper adjustment of other controls may result in damage, and will often require extensive repair work by a qualified technician). E. If the product has been dropped, or the cabinet has been damaged. F . If the product exhibits a distinct change in performance. 12. Do not use the telephone to report a gas leak in the vicinity of t[...]

5 factors limit range, and it would be impossible to include all the variables in our rating. The Maximum Range rating of this phone is meant to be used as a means of comparison against other range claims. T elephone Line Problems If you are having trouble with your telephone service, you must first disconnect your phone to determine if it is the c[...]

6 INTRODUCTION Congratulations on your purchase of the Uniden DS72 cordless telephone. This phone is designed for reliability , long life, and outstanding performance utilising the latest in 900 MHz Digital Spread Spectrum T echnology . ● 15 channels (Aust), 7 channels (NZ) ● 900 Digital MHz Spread Spectrum T echnology ● Speakerphone ● Dual[...]

7 INCLUDED IN YOUR P ACKAGE Handset Long T elephone Cord/Plug Base W all Mount Adaptor f l a s h v o l m e m r e d i a l / p i n t c .w a it ta lk t a l k b a t t l o w 12 a b c 4 g h i 5 j k l 6 m n o 7 p q r s 8 t u v 9 w x y z * 0# 3 d e f T o get the most from your phone, please read this owner’ s manual thoroughly . Be sure to complete and m[...]

8 INST ALLING ▼ Selecting a Location Before choosing a location for your new phone, here are some important guidelines you should consider: ● The location should be close to both a phone jack and a power outlet. ● Keep the base and handset away from sources of electrical noise such as motors and fluorescent lighting. ● Be sure there is suff[...]

9 1. Plug the AC adaptor cord into the 9V DC input jack on the back of the base. 2. Plug the AC adaptor into a standard 240V AC wall outlet. 3. Charge the battery (See CHARGING THE BA TTERY P ACK, page 15). 4. Plug one end of the telephone cord into the TEL LINE jack on the back of the base. 5. Plug the other end of the cord into the telephone jack[...]

▼ Standard wall plate mounting This phone can be mounted on any standard wall plate. 1. Snap the wall mount adaptor into the bottom of the base as shown. 2. Plug the AC adaptor into the base. 3. Place the AC adaptor cord inside the wall mount adaptor slots. 4. Plug the AC adaptor into a standard 240V AC wall outlet. 5. Plug one end of the short t[...]

6. Align the mounting slots on the base with the mounting posts on the wall. Push in and down until the phone is firmly seated. 7. On the base, pull the handset retainer out of the slot. Rotate clockwise 180°. 8. Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is (arrow on the retainer must be poin[...]

1. Insert two mounting screws (with their appropriate anchoring device) into the wall 100mm apart. Allow about 5mm between the wall and screw heads for mounting the phone. 2. Snap the desktop/wall mount adaptor into the bottom of the base as shown. 3. Plug the AC adaptor cord into the 9V DC input jack on the back of the base. 4. Put the AC adaptor [...]

13 6. Align the mounting slots on the base with the mounting screws on the wall. Push in and down until the phone is firmly seated. 7. On the base, pull the handset retainer out of the slot. Rotate clockwise 180°. 8. Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up (arrow on the retainer clip [...]

1. Press battery cover release. Slide cover off. 2. Align the plastic connector of the Nickel Metal Hydride battery with it’ s socket and plug it in. 3. Place the battery pack inside. Please observe how the lead is positioned. 4. Slide the battery cover forward until it snaps into place INST ALLING THE HANDSET BA TTERY PA C K 14 Use only Uniden B[...]

15 ▼ Initial battery charging Before connecting your the phone for the first time, fully charge the rechargeable battery pack for 15-20 hours without interruption. 1. Place the handset on the base (facing up or down). 2. Make sure that charge LED lights. If the LED doesn’t light, be sure the AC adaptor is plugged in and the handset makes good c[...]

16 ▼ Low battery indicator The low battery indicator shows when the battery pack is very low and needs to be charged. If the phone is not in use, the batt low LED flashes every four seconds. If the phone is in use, the batt low LED flashes every four seconds and the handset beeps. Complete your conversation as quickly as possible and return the h[...]

17 ▼ Handset ringer volume Press the vol ▲ or ▼ key on the handset to set the handset ringer volume. There are two ringer volume settings; high and low . ▼ Handset earpiece volume There are four volume settings for the handset earpiece; max., high, low and min. The handset earpiece volume can be adjusted only during a call. T o lower the vo[...]

▼ T o attach the beltclip . Insert the beltclip into the empty slot and press down until it clicks. ▼ T o remove the beltclip Pull back on the release tab and lift the beltclip up. flash vol mem redial/p mute c. wait talk talk batt low 12 abc 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz * 0# 3 def INST ALLING THE BEL TCLIP 18[...]

Y our phone may be used with an optional headset, the Uniden HS910/HS900. T o use this feature, simply plug the headset plug into the headset jack. Y our phone is ready for hands-free conversations. T o prevent other parties from making unauthorised calls on your phone line, a digital code was added to the DS72. Y our phone’ s handset and base sh[...]

20 ▼ Basic phone operation USING YOUR NEW PHONE MAKING AND RECEIVING CALLS 1. Pick up the handset. 2. Press talk . 3. Listen for the dial tone. 4. Press redial . flash vol mem redial/p int c. wait talk talk batt low 12 abc 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz * 0# 3 def Handset Off Base Base Only Handset On Base T o answer a call Pick up handset[...]

The c.wait procedure toggles between the incoming and original call (vice versa). The c.wait procedure will drop the current call and pick up the incoming call or call on hold. 21 ▼ For Australian Version Using the c.wait feature Please call your local telephone service provider to check the availability of this service in your area. 1. While tal[...]

22 22 T o use the mute feature during a conversation, press mute . The other party will not be able to hear you although you can hear them. T o disable the mute feature, press mute again. ▼ Intercom from the Base Unit 1. Press int on the base unit. (If there is no answer press int again to disconnect). 2. Press int on the handset to answer the in[...]

23 3. Press speaker on the base unit to establish communications between the calling party . ▼ Transferring a call from the Base Unit to the Handset 1. During a call, press int on the base unit, the call is placed on hold automatically and the handset is paged. (If there is no answer press int again to return to the call on hold). 2. At the hands[...]

24 ▼ Using the memory location features 1. Press talk on handset or speaker on the base Unit 2. Press mem. 3. Enter the memory location (01-20). The number automatically dials. 1. Remove the handset from the base unit. 2. Press mem button twice. 3. Press the memory location (01-20) to be erased. A tone indicates that the stored number is erased f[...]

25 3. At the appropriate time, press mem and number ● 4 on the base unit keypad. 4. Y our base unit dials the number and you may proceed with your transaction. As you begin to move too far from the base, you will first hear a clicking sound. As you travel further , the noise increases. If you travel out-of-range, your call terminates. The DS72 te[...]

26 TROUBLESHOOTING YOUR NEW PHONE If your phone is not performing to your expectations, please try these simple steps first before calling Uniden customer service . QUICK REFERENCE CHART The charge light won’t come on when the handset is placed on the base. ● Make sure the AC adaptor is plugged into the base and wall outlet. ● Make sure the h[...]

27 TROUBLESHOOTING No dial tone. ● Check the telephone line cord connectors at both ends that they are pushed in firmly until they click. ● If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five second to reset the system. PROBLEM Does not ring. ● Y ou may have exceeded the Ringer Equiv[...]

28 Australian Specification: The DS72 complies with TS001, TS002, TS004, AS/NZS 3260 and FCC Part 15(as per ACA Radio Communications Class Licensing Requirements). New Zealand Specification: The DS72 complies with PTC200, RFS 29. Frequency control: PLL Modulation: Direct Sequence Spread Spectrum; DBPSK Operating temperature: 0º to +50º C Frequenc[...]

29 One Y ear Limited Warranty Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited ACN 001 865 498 Uniden New Zealand Limited ELEMENT OF W ARRANTY : Uniden warrants to the original retail owner for the duration of this warranty , its DS72(herein after referred to as the Product), to be f[...]

1. Headset Jack 2. Battery Compartment 3. Handset Antenna 4. T alk Button 5. Redial/Pause Button 6. T alk LED 7. Battery Low LED 8. Call W aiting Button 9. Numeric Keypad 10. Flash Button 11. Int Button 12. Mem Button 13. V olume Up/Down Button 14. Handset Microphone 15. Hash Button 16. Star Button 17. DC in 9V 18. T el Line A. Speaker Button B. Ba[...]

charge speaker in use/hold/mute power mic flash redial/p int mem hold mute 12 abc 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz * 0# 3 def vol flash vol mem redial/p int c. wait talk talk batt low 12 abc 4 ghi 5 jkl 6 mno 7 pqrs 8 tuv 9 wxyz * 0# 3 def 1 6 16 10 Q K I H J 11 15 P N L F G M A B C E D O 9 8 7 3 12 13 14 4 5 2 31[...]

THANK YOU © 2000 Uniden Australia Pty Limited Uniden New Zealand Limited FOR PURCHASING A UNIDEN PHONE![...]