Uniden PS-0035 инструкция обслуживания

Charger AC adapter (PS-0035) Battery cover EZX290 accessory handset and charger If you purchased model number: You should have: EZI2996 None EZI2996-2 1 of each EZI2996-3 2 of each EZI2996-4 3 of each EZI2996-5 4 of each EZI2996-6 5 of each You might also nd: Rechargeable battery pack (BT-1007) If any items are missing or damaged, contact our Cu[...]

Important Safety Precautions! When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: This unit is NOT waterproof . Do not expose it to rain or moisture. Do not use this product near water, for example, near a bath tub, wash bo[...]

1 Installing Your Phone Charge the Battery Unpack all handsets, battery packs, and battery covers. If any battery cover is already on the handset, press in on the notch and slide the cover down and off. Line up the red and black wires on the battery pack with the label inside the handset. Push the battery pack connector in until it clicks into plac[...]

2 Place a handset in the base and any accessory handset(s) in the charger(s) with the display(s) facing forward. The CH A R GE light on the base and each charger should all turn on. If... Try... the C H A RG E light does not turn on reseating the handset. checking the AC adapter connection. seeing if the outlet is controlled by a wall switch. - - -[...]

3 Getting to Know Your Phone Base Keys and How They Work Front view Side View Back View + - RINGER DOWN UP VISUAL RINGER switch Key name (& icon) What it does DO NOT DISTURB ( ) In st andby: turn t he Do Not Dis turb f eature on or off (s ee page 15). - FIND In standby: page all han dsets so you can find a lost one. - RINGER In standby: cycle t[...]

4 Key name (& icon) What it does DOWN ( – ) In standby or while the phone is ringing: decrease the ringer volume. - UP ( + ) In standby or while the phone is ringing: increase the ringer volume. - VISUAL RINGER switch In standby: adjust the brightness of the base visual ringer (see page 16). - Parts of the Handset If the key name is spelled o[...]

5 Handset keys and how they work Key name (and icon) What it does PHONEBOOK/ LEFT (PHBK) In standby or during a call: open the phonebook. In the menu: go back to the previous screen. During text entry: move the cursor to the left. - - - SPEAKER (SPKR) Switch a normal call to the speakerphone (and back). - SELECT/ MENU In standby: open the menu. In [...]

6 Reading the handset display The table below shows the possible icons and what they mean. Since the icons appear based on what you're doing with the phone, you won't ever see all of these icons at the same time. Icon What it means The volume of the earpiece is boosted (see page 16). The ringer is turned off: this handset will not ring wh[...]

7 Using the Menus The menus are designed to be as easy as possible. Some users don't even need the manual once they know how to perform these basic actions: Open the menu Press SELECT/MENU . Move the cursor The arrow cursor on the left side of the line shows which menu item is currently highlighted. Use UP to move the cursor up and DOWN to mov[...]

8 Autotalk Turn on Auto Talk so you can answer the phone just by picking up the handset from the cradle (without pressing any buttons). Any Key Answer Turn on Any Key Answer so you can answer the phone by pressing any key on the twelve-key dial pad. Banner Change the name used on the handset's display. Handset Language Change the display langu[...]

9 The phone enters the letters in the order they appear on the key. For example, if you press the number key 2 once, the phone enters the letter A . Press 2 twice for B , and three times for C . If you press the key again after the last letter, the phone starts the same letter sequence with small letters. If you press 2 four times in a row, the pho[...]

10 Changing the Volume You can set the ringer, earpiece, and speaker volume separately for each handset. You can change the ringer volume on the base, also. To change the... Follow these steps... handset ringer volume Wi th the ph on e i n s ta ndb y, pre ss UP o r DO WN t o c ycl e t hr oug h the available ringer volumes: Off, Low, Medium , or Hig[...]

11 Using Caller ID and Call Waiting You have to subscribe to Caller ID, Call Waiting, and Caller ID on Call Waiting services to use the features described in this section: contact your telephone provider for more information. When a call comes in, the phone displays the caller’s number and name (if available); if you turned on Text-To-Speech, it [...]

12 Using Seven-Digit Dialing If you can make a local call by dialing only seven digits instead of ten, you can tell the phone to hide your local area code in the CID list. Open the menu and select Global Setup , then select Area Code . Use the number keypad ( 0 - 9 ) to enter your three-digit area code. Press SELECT/MENU when you’re finished. The[...]

13 Phonebook entry options With the phone in standby, open the phonebook and find the entry you want. Press SELECT/MENU to open the individual phonebook entry menu. Choose one of these options: Edit Edit this entry. The handset will prompt you to edit the name and number, and choose a personal ring. Copy Copy this entry to another handset. (You mus[...]

14 Using Multi-Handset Features The expandable base works together with the accessory handsets to give you some useful multi-handset features. You must have at least two handsets to use the features in this section. Expanding Your Phone Your base supports a total of six EZX290 accessory handsets, including any that were supplied with your phone. (T[...]

15 Using the Intercom Here are some general things you need to know about using the intercom: Whenever the phone is in standby, you can make an intercom call between handsets without using the phone line. You can make an intercom call from any handset , but only two ha ndsets can be in an intercom call at any time. If an outside call comes in durin[...]

16 Adjusting the Base Visual Ringer The VISUAL RINGER switch is at the back of the base; use this switch to change the brightness of the base visual ringer. (It doesn't affect the audio ringers.) Slide the switch so that its center (marked with the arrow in the picture) lines up with the brightness you want to use: HI G H , LO W , or OF F . Us[...]

17 Using a Voice Mail Service If you subscribe to a voice mail service, your phone can notify you when you have a new message waiting; you can also program your access number so you can get your messages at the touch of a button. Setting Up Your Voice Mail When you sign up for your voice mail, your service provider should give you an access number [...]

18 Solving Problems If you have any trouble with your phone, try these simple steps first. If you still have a question, call our Customer Care Line listed on the front cover. If… Try… No handsets can make or receive calls. Checking the telephone cord connection. Disconnecting the base AC adapter. Wait a few minutes, then reconnect it. - - One [...]

19 If… Try… The voice message icon won't go away. Resetting the Voice Message Waiting Indicator (see page 17). - I can't register a handset. Seeing if you already have 6 handsets registered to this base. Resetting the handset. - - Weak or Hard To Hear Audio If a caller’s voice sounds weak or soft, the signal might be blocked by larg[...]

20 other services that use your phone line, like alarm systems, intercom systems, or broadband Internet service Here are some hints for when the static is... on 1 handset or in 1 location: on all handsets or in all locations: Check nearby for one of the common interference sources. Try moving the handset away from a suspected source, or try moving [...]

21 If you use pulse dialing and you need to send DTMF tones during a call (if you're using an automated response system, for example), press to temporarily switch to tone dialing. When the call ends, the phone automatically returns to pulse dialing mode. Resetting and Registering Handsets If you are having trouble with a handset or if you want[...]

22 Handling Liquid Damage Moisture and liquid can damage your cordless phone. If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid & use as normal. If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the hand[...]

23 Important Information Terms Used In This Guide Accessory Handset An extra handset that can register to and be used with an expandable phone base. All accessory handsets must be registered to a base. Base The main part of the phone. It connects to your phone line and lets you make and receive calls. Most bases also have a cradle to store a handse[...]

The rechargeable Ni-Cd battery contained in this equipment may explode if disposed of in a re. Do not charge the battery used in this equipment in any charger other than the one designed to charge this battery as specied in the owner's manual. Using another charger may damage the battery or cause it to explode. As part of our commitment [...]

Any changes or modications to this product not expressly approved by the manufacturer or other party responsible for compliance could void your authority to operate this product. NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected [...]

© 2009 Uniden America Corp. Printed in Vietnam Ft. Worth, TX 76155 UNZZ01053BZ(0) One-year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to b[...]