Uniden UH015sx инструкция обслуживания

UNIDEN Model uh015sx UHF CB Radio[...]

UNIDEN Model uh015sx UHF CB Radio Contents Introduction 3 Features 3 Preventive Maintenance 3 T roubleshooting 3 Controls / Connectors 4 Indicators 5 Package Content s 6 Mounting Options 7 Operation 9 Setting the Squelch 9 Monitor 9 Selecting a Channel/POLICE and CB Channel Group s 9 T ransmitting 10 Using Repeater Channels (Duplex Mode) 10 Operati[...]

UNIDEN Model uh015sx UHF CB Radio Contents Selective Calling 18 Outline 18 Receiver Quieting 18 Call Receiving 19 T one Squelch Scanning 20 T one Calling 20 5/6 TX T one Selcall Programming 21 Group Calling 22 TX Selcall ID Format 22 5/6 T one Selcall Programming 23 Receiver Selcall ID 24 Programming Y our Selcall ID 24 Other Selcall Parameters 26 [...]

UNIDEN Model uh015sx UHF CB Radio Introduction The Uniden uh015sx is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withst anding harsh environments. Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit. The citizen band radio service is li[...]

UNIDEN Model uh015sx UHF CB Radio Controls/Connectors Controls and Connectors Ref Item Page Ref Item Page - Search, Search Band/T one Liquid Crystal Display (LCD) 5 Squelch 13 Rotary Channel Selector - Monitor , Squelch button 9 (Rotary Knob) 9 - Hold, DCS/CTCSS On/Off V olume 9 button 1 1, 17 Push to T alk (PTT) Button 10 - Channel Group Select (P[...]

TX TSQ SCN DUP GS CAL HOLD MON PRI SRC SQT INST MEM CB POLICE VOX CTCSS BCL DCS UNIDEN Model uh015sx UHF CB Radio Indicators Indicators Ref. Item Page Ref. Item Page 16 SCN - Scan 1 1 29 BCL - Busy Channel Lockout 16 17 TSQ - T one Squelch 18 30 DCS - Digital Coded Squelch 17 18 TX - T ransmit 10 31 S/RF - RF S trength Meter - 19 GS - Group Scan 12[...]

UNIDEN Model uh015sx UHF CB Radio Package Content s 6 uh015sx Owners Manual Optional Accessories DIN Mounting Kit (DMK8990) External Speaker (MS100) uh015sx[...]

UNIDEN Model uh015sx UHF CB Radio Mounting Options The radio can be mounted complete - or - with the Display Unit remote of the T ransceiver . Mounting the complete radio (T ransceiver with Display Unit) a) Plug in display cable from the Display Unit to the transceiver . b) Hinge the Display Unit into the transceiver as shown in the diagram, then s[...]

UNIDEN Model uh015sx UHF CB Radio Mounting Options 8 T op fix Back fix Bottom fix Remote mounting of the Display Unit Fixing the Display Rear Bracket T o mount the Display Unit it needs to be fitted with a Display Rear Bracket (included in package). a)Position the Display Rear Bracket so that one end fits over the two studs at the end of the Displa[...]

Setting the Squelch T urn the Unit ON by rotating the volume control clockwise. The uh015sx has 3 preset squelch levels: 1 - max sensitivity (min squelch) 2 - med sensitivity (med squelch) 3 - min sensitivity (max/tight squelch) It requires no adjustment. Press and hold MON . The squelch will flash. T urn rotary knob to select. Press MON to set. Th[...]

UNIDEN Model uh015sx UHF CB Radio Operation T ransmitting The uh015sx uses the 40 UHF-CB Channels. See page 36 for UHF-CB Channels & Frequencies. Channels 22 and 23 are for telemetry and telecommand applications. T ransmit is inhibited on these channels. Select the desired channel. Press the microphone's PTT button and speak normally into [...]

UNIDEN Model uh015sx UHF CB Radio Operation 11 Operating the uh015sx in Duplex Mode For this example we are adopting CH01 as the channel being used in your area for repeater use. T o Set Duplex ON/OFF Press once. The DUP setting will flash. T urn the rotary knob to adjust the setting to or . Press & hold /ENTER to set. A confirmation tone sound[...]

UNIDEN Model uh015sx UHF CB Radio Operation 12 Group Scan (GS) Mode The GS scan memory is empty at factory setting. Channels and frequencies must be memorized to GS scan memory for scan to work in GS mode (see p.13). Allows you to monitor a Priority channel while scanning other channels in the GS memory . The Priority channel is the same as the Ins[...]

UNIDEN Model uh015sx UHF CB Radio Operation 13 Memorizing Channels and Frequencies for Scan Press and hold /OS/GS to select the scanning mode you wish to store to - OS or GS. Press to activate the channel group(s) you wish to select from - CB and/or POLICE. T urn the rotary channel selector to select the channel you wish to add to the OS or GS scan[...]

UNIDEN Model uh015sx UHF CB Radio Operation 14 60 RX Channels The uh015sx has 60 receive only channels (CH41 to CH100) which can be programmed with frequencies ranging from 400-512MHz (in 12.5kHz steps). If you know the frequency you may store it manually or you may copy a Police frequency to a channel or you may use the search function to find an [...]

UNIDEN Model uh015sx UHF CB Radio Operation 15 Copying a frequency found using SEARCH to a RX Channel S tart Search feature. When an active frequency is found which you wish to store press to stay on that frequency . Press and hold /ENTER . The next available empty channel will show , alternating with the Search frequency . T urn Rotary Channel Sel[...]

UNIDEN Model uh015sx UHF CB Radio Operation 16 Busy Channel Lockout If the channel is already in use, you can prevent the uh015sx from transmitting . This is particularly important when using CTCSS/DCS. Press 4 times. The BCL setting will flash.T urn the Rotary Channel Selector to display . Press and hold /ENTER for 2 seconds to store the new setti[...]

CTCSS (Continuous T one Coded Squelch System) This feature allows you to receive signals only from callers who have selected the same CTCSS code. T urn the Rotary Channel Selector to select the channel you want to set a CTCSS code. Press and hold /CTCSS/DCS. The CTCSS channel display will flash. T urn the rotary knob to select a desired CTCSS code.[...]

UNIDEN Model uh015sx UHF CB Radio Selective Calling 18 Outline Selective Calling (Selcall) is a special Sequential T one Squelch System that allows the user to receive/transmit calls selectively from/to an individual or group, on a shared busy channel. The uh015sx has a Selective Calling system. Exceptional features, like Receiver Quieting, T one S[...]

UNIDEN Model uh015sx UHF CB Radio Selective Calling 19 T o Activate: 1. Select the channel you want to put in ‘QUIET’ mode using the Channel selector . 2. Press and hold /TSQ for 2 seconds. T wo beeps are heard and the TSQ icon appears on the LCD display . T o Deactivate the Quiet Condition: 1. Select the T one squelched Channel using the Chann[...]

UNIDEN Model uh015sx UHF CB Radio Selective Calling 20 T one Squelch Scanning If you are using two or more Channels in the TSQ mode, you can monitor all of these Channels for selective calls by using the TSQ scanning feature. T o use this feature start the TSQ Scan by pressing and holding /TSQ for 2 seconds during Open Scan or Group Scan. Unlike No[...]

UNIDEN Model uh015sx UHF CB Radio Selective Calling 21 5/6 TX T one Selcall Programming 1. Press . The TX Selcall Code will be displayed. (factory default :00000) Use or to select the digit position. The selected digit will flash. Rotate the Channel Selector to change the active digit value. When finished, transmit the TX Selcall Code by pressing t[...]

UNIDEN Model uh015sx UHF CB Radio Selective Calling 22 Group Calling The uh015sx has the capability to respond to Group Calling and to transmit Group Calling Codes. Group Calling allows you to call members of your group simultaneously . However , to do this, you need to follow a certain format when programming your TX Selcall ID. TX Selcall ID Form[...]

UNIDEN Model uh015sx UHF CB Radio 5/6 T one Selcall Programming 23 Since uh015sx can support either a 5 or 6 tone signalling format, you and your group must decide which format to use. The following is a basic outline of Selcall Programming. Press and hold then turn power on. T o edit any option, press /ENTER . T o cancel any setting, momentarily p[...]

UNIDEN Model uh015sx UHF CB Radio Reciever Selcall ID 24 Programming Y our Selcall ID. T o programme your own receiver Selcall ID. 1. Press and hold then turn power on. 2. The initial display and status will appear on the screen (factory default is 00000). 3. When the key is pressed while in this condition , the last digit will begin to flash. 4. U[...]

UNIDEN Model uh015sx UHF CB Radio Reciever Selcall ID 25 Selecting 5 or 6 T one Format From 5 to 6 T one Format 1. While the 5th digit is flashing, press . A space bar [ _ ] will appear and flash. 2. Assign a Selcall number on this position. 3. Rotate the Channel Selector to change the active digit value. 4. When finished, press /ENTER to store. Th[...]

UNIDEN Model uh015sx UHF CB Radio Reciever Selcall ID 26 2. When finished, press /ENTER to store. Three successive beeps are heard. 3. Press /ENTER for 2 seconds to exit. The radio returns to normal operation. -or- T urn the Channel Selector to go to the next programmable parameter . Other Selcall Parameters Y ou should also be familiar with some o[...]

UNIDEN Model uh015sx UHF CB Radio Selcall ID 27 T one Period T one period is the duration of one tone in a Selcall ID sequence. The setting of this parameter depends on the type of application. On long distance communications, for example: where the signal strength of the transmitted information is greatly reduced and affected by noise, it is advis[...]

UNIDEN Model uh015sx UHF CB Radio Selcall ID 28 4. When finished, press /ENTER to store. Three successive beeps are heard. 5. Press /ENTER for 2 seconds to exit. The radio returns to normal operation. -or- T urn the channel selector to go to the next programmable parameter . Lead-in Delay Lead-in delay is a Selcall transmission parameter that ‘wa[...]

UNIDEN Model uh015sx UHF CB Radio Selcall ID 29 Lead-in Delay Programming 1. Press and hold then turn power on. Rotate the Channel Selector until is displayed. 500 mSec is the factory default setting of uh015sx for Lead-in Delay . 2. Press /ENTER and Lead-in Delay Editing is possible. Use the Channel Selector to change the Lead-in delay value. MENU[...]

UNIDEN Model uh015sx UHF CB Radio 30 3. When finished, press /ENTER to store. Three successive beep s are heard. 4. Press /ENTER for 2 seconds to exit. The radio returns to normal operation. -or- T urn the Channel Selector to go to the next programmable parameter . Lead-in T one The Lead-in T one, when programmed, ‘rides’ on the Lead-in Delay .[...]

UNIDEN Model uh015sx UHF CB Radio Selcall ID 31 If you want to remove the Lead-in T one choose the space [ _ ] Bar . 3. When finished, press /ENTER to store. Three successive beeps are heard. 4. Press /ENTER for 2 seconds to exit. The radio returns to normal operation. -or- T urn the Channel Selector to go to the next programmable parameter . Make [...]

UNIDEN Model uh015sx UHF CB Radio Alarm Mode 32 Alarm Mode When a received code matches to your receiver Selcall ID and you selected the Call Alarm Auto Mode the Unit will: a. T ransmit an Acknowledge tone to the Caller . b. Emit CALL Alarm for 10 seconds only . c. Resume Quiet condition automatically after 20 seconds if the call is not answered. d[...]

UNIDEN Model uh015sx UHF CB Radio Alarm Mode 33 2. Press /ENTER and Alarm mode editing is possible. Call Alarm Continuous Mode Call Alarm Auto Off Mode MENU[...]

UNIDEN Model uh015sx UHF CB Radio Alarm Mode 34 3. Use the Channel Selector to change the Alarm mode. 4. When finished, press /ENTER to store .Three successive beeps are heard. 5. Press /ENTER for 2 seconds to exit. The radio returns to normal operation. -or- T urn the Channel Selector to go to the next programmable parameter . Group 01 mode sets t[...]

UNIDEN Model uh015sx UHF CB Radio Group Call Mode 35 4. When finished, press /ENTER to store. Three successive beep s are heard. 5. Press /ENTER for 2 seconds to exit. The radio returns to normal operation. -or- T urn the Channel Selector to go to the next programmable parameter . A. RX Selcall ID : 00000 B. TX Selcall ID : 00000 C. T one Period : [...]

UNIDEN Model uh015sx UHF CB Radio UHF CB Channels & Frequencies 36 Simplex Mode Duplex Mode Simplex Mode CH No. T ransmit / Receive T ransmit CH No. T ransmit/Receive F requency (MHz) F requency (MHz) F requency (Mhz) 1 476.425 477.175 CH31 21 476.925 2 476.450 477.200 CH32 22 476.950 (RX only) 3 476.475 477.225 CH33 23 476.975 (RX only) 4 476.[...]

UNIDEN Model uh015sx UHF CB Radio CTCSS & DCS Code List 37 (o1) (o0) (o2) (o3) (o4)[...]

UNIDEN UH015SX UHF CB TRANSCEIVER RADIO Limited T wo Y ear W arranty Please keep your sales docket as it provides evidence of warranty . W arrantor: Uniden Australia Pty Limited ABN 58 001 865 498 Uniden New Zealand Limited W arranty only available in original country of purchase Elements of W arranty: Uniden warrants to the original ret ail owner [...]

© 2007 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UTZZ01931ZB(0)[...]